diff mbox series

[v2,1/3] arm64: dts: qcom: pm8450a: add rtc node

Message ID 20221214210908.1788284-1-echanude@redhat.com
State New
Headers
Series [v2,1/3] arm64: dts: qcom: pm8450a: add rtc node |

Commit Message

Eric Chanudet Dec. 14, 2022, 9:09 p.m. UTC 
  Add the rtc block on pm8450a first pmic to enable the rtc for
sa8540p-ride.

Signed-off-by: Eric Chanudet <echanude@redhat.com>
---
 arch/arm64/boot/dts/qcom/pm8450a.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

Comments

Konrad Dybcio Dec. 15, 2022, 12:59 p.m. UTC | #1 
On 14.12.2022 22:09, Eric Chanudet wrote:
> Add the rtc block on pm8450a first pmic to enable the rtc for
> sa8540p-ride.
> 
> Signed-off-by: Eric Chanudet <echanude@redhat.com>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
>  arch/arm64/boot/dts/qcom/pm8450a.dtsi | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/pm8450a.dtsi b/arch/arm64/boot/dts/qcom/pm8450a.dtsi
> index 34fc72896761..c9b8da43b237 100644
> --- a/arch/arm64/boot/dts/qcom/pm8450a.dtsi
> +++ b/arch/arm64/boot/dts/qcom/pm8450a.dtsi
> @@ -13,6 +13,14 @@ pm8450a: pmic@0 {
>  		#address-cells = <1>;
>  		#size-cells = <0>;
>  
> +		rtc@6000 {
> +			compatible = "qcom,pm8941-rtc";
> +			reg = <0x6000>, <0x6100>;
> +			reg-names = "rtc", "alarm";
> +			interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
> +			wakeup-source;
> +		};
> +
>  		pm8450a_gpios: gpio@c000 {
>  			compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio";
>  			reg = <0xc000>;
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/pm8450a.dtsi b/arch/arm64/boot/dts/qcom/pm8450a.dtsi
index 34fc72896761..c9b8da43b237 100644
--- a/arch/arm64/boot/dts/qcom/pm8450a.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8450a.dtsi
@@ -13,6 +13,14 @@  pm8450a: pmic@0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		rtc@6000 {
+			compatible = "qcom,pm8941-rtc";
+			reg = <0x6000>, <0x6100>;
+			reg-names = "rtc", "alarm";
+			interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
+			wakeup-source;
+		};
+
 		pm8450a_gpios: gpio@c000 {
 			compatible = "qcom,pm8150-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;