[v2,1/7] arm64: dts: qcom: sc8280xp: rename qup2_uart17 to uart17

Message ID 20221214171145.2913557-2-bmasney@redhat.com
State New
Headers
Series dts: qcom: sc8280xp: add i2c, spi, and rng nodes |

Commit Message

Brian Masney Dec. 14, 2022, 5:11 p.m. UTC
  In preparation for adding the missing SPI and I2C nodes to
sc8280xp.dtsi, it was decided to rename all of the existing qupX_
uart, spi, and i2c nodes to drop the qupX_ prefix. Let's go ahead
and rename qup2_uart17 to uart17. Note that some nodes are moved in the
file by this patch to preserve the expected sort order in the file.

Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/lkml/20221212182314.1902632-1-bmasney@redhat.com/
---
This is a new patch that's introduced in v2.

 arch/arm64/boot/dts/qcom/sa8295p-adp.dts  | 12 ++++++------
 arch/arm64/boot/dts/qcom/sa8540p-ride.dts | 12 ++++++------
 arch/arm64/boot/dts/qcom/sc8280xp-crd.dts | 14 +++++++-------
 arch/arm64/boot/dts/qcom/sc8280xp.dtsi    |  2 +-
 4 files changed, 20 insertions(+), 20 deletions(-)
  

Comments

Konrad Dybcio Dec. 15, 2022, 12:49 p.m. UTC | #1
On 14.12.2022 18:11, Brian Masney wrote:
> In preparation for adding the missing SPI and I2C nodes to
> sc8280xp.dtsi, it was decided to rename all of the existing qupX_
> uart, spi, and i2c nodes to drop the qupX_ prefix. Let's go ahead
> and rename qup2_uart17 to uart17. Note that some nodes are moved in the
> file by this patch to preserve the expected sort order in the file.
> 
> Signed-off-by: Brian Masney <bmasney@redhat.com>
> Link: https://lore.kernel.org/lkml/20221212182314.1902632-1-bmasney@redhat.com/
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
> This is a new patch that's introduced in v2.
> 
>  arch/arm64/boot/dts/qcom/sa8295p-adp.dts  | 12 ++++++------
>  arch/arm64/boot/dts/qcom/sa8540p-ride.dts | 12 ++++++------
>  arch/arm64/boot/dts/qcom/sc8280xp-crd.dts | 14 +++++++-------
>  arch/arm64/boot/dts/qcom/sc8280xp.dtsi    |  2 +-
>  4 files changed, 20 insertions(+), 20 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
> index 84cb6f3eeb56..61f2e44e70c1 100644
> --- a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
> +++ b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
> @@ -17,7 +17,7 @@ / {
>  	compatible = "qcom,sa8295p-adp", "qcom,sa8540p";
>  
>  	aliases {
> -		serial0 = &qup2_uart17;
> +		serial0 = &uart17;
>  	};
>  
>  	chosen {
> @@ -240,11 +240,6 @@ &qup2 {
>  	status = "okay";
>  };
>  
> -&qup2_uart17 {
> -	compatible = "qcom,geni-debug-uart";
> -	status = "okay";
> -};
> -
>  &remoteproc_adsp {
>  	firmware-name = "qcom/sa8540p/adsp.mbn";
>  	status = "okay";
> @@ -338,6 +333,11 @@ pm8450g_gpios: gpio@c000 {
>  	};
>  };
>  
> +&uart17 {
> +	compatible = "qcom,geni-debug-uart";
> +	status = "okay";
> +};
> +
>  &ufs_mem_hc {
>  	reset-gpios = <&tlmm 228 GPIO_ACTIVE_LOW>;
>  
> diff --git a/arch/arm64/boot/dts/qcom/sa8540p-ride.dts b/arch/arm64/boot/dts/qcom/sa8540p-ride.dts
> index 21f3ff024910..b6e0db5508c7 100644
> --- a/arch/arm64/boot/dts/qcom/sa8540p-ride.dts
> +++ b/arch/arm64/boot/dts/qcom/sa8540p-ride.dts
> @@ -17,7 +17,7 @@ / {
>  	compatible = "qcom,sa8540p-ride", "qcom,sa8540p";
>  
>  	aliases {
> -		serial0 = &qup2_uart17;
> +		serial0 = &uart17;
>  	};
>  
>  	chosen {
> @@ -192,11 +192,6 @@ &qup2 {
>  	status = "okay";
>  };
>  
> -&qup2_uart17 {
> -	compatible = "qcom,geni-debug-uart";
> -	status = "okay";
> -};
> -
>  &remoteproc_nsp0 {
>  	firmware-name = "qcom/sa8540p/cdsp.mbn";
>  	status = "okay";
> @@ -207,6 +202,11 @@ &remoteproc_nsp1 {
>  	status = "okay";
>  };
>  
> +&uart17 {
> +	compatible = "qcom,geni-debug-uart";
> +	status = "okay";
> +};
> +
>  &ufs_mem_hc {
>  	reset-gpios = <&tlmm 228 GPIO_ACTIVE_LOW>;
>  
> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
> index 551768f97729..db273face248 100644
> --- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
> +++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
> @@ -17,7 +17,7 @@ / {
>  	compatible = "qcom,sc8280xp-crd", "qcom,sc8280xp";
>  
>  	aliases {
> -		serial0 = &qup2_uart17;
> +		serial0 = &uart17;
>  	};
>  
>  	backlight {
> @@ -363,12 +363,6 @@ keyboard@68 {
>  	};
>  };
>  
> -&qup2_uart17 {
> -	compatible = "qcom,geni-debug-uart";
> -
> -	status = "okay";
> -};
> -
>  &remoteproc_adsp {
>  	firmware-name = "qcom/sc8280xp/qcadsp8280.mbn";
>  
> @@ -381,6 +375,12 @@ &remoteproc_nsp0 {
>  	status = "okay";
>  };
>  
> +&uart17 {
> +	compatible = "qcom,geni-debug-uart";
> +
> +	status = "okay";
> +};
> +
>  &ufs_mem_hc {
>  	reset-gpios = <&tlmm 228 GPIO_ACTIVE_LOW>;
>  
> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> index 109c9d2b684d..951cb1b6fcc4 100644
> --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> @@ -813,7 +813,7 @@ qup2: geniqup@8c0000 {
>  
>  			status = "disabled";
>  
> -			qup2_uart17: serial@884000 {
> +			uart17: serial@884000 {
>  				compatible = "qcom,geni-uart";
>  				reg = <0 0x00884000 0 0x4000>;
>  				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
  

Patch

diff --git a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
index 84cb6f3eeb56..61f2e44e70c1 100644
--- a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
+++ b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
@@ -17,7 +17,7 @@  / {
 	compatible = "qcom,sa8295p-adp", "qcom,sa8540p";
 
 	aliases {
-		serial0 = &qup2_uart17;
+		serial0 = &uart17;
 	};
 
 	chosen {
@@ -240,11 +240,6 @@  &qup2 {
 	status = "okay";
 };
 
-&qup2_uart17 {
-	compatible = "qcom,geni-debug-uart";
-	status = "okay";
-};
-
 &remoteproc_adsp {
 	firmware-name = "qcom/sa8540p/adsp.mbn";
 	status = "okay";
@@ -338,6 +333,11 @@  pm8450g_gpios: gpio@c000 {
 	};
 };
 
+&uart17 {
+	compatible = "qcom,geni-debug-uart";
+	status = "okay";
+};
+
 &ufs_mem_hc {
 	reset-gpios = <&tlmm 228 GPIO_ACTIVE_LOW>;
 
diff --git a/arch/arm64/boot/dts/qcom/sa8540p-ride.dts b/arch/arm64/boot/dts/qcom/sa8540p-ride.dts
index 21f3ff024910..b6e0db5508c7 100644
--- a/arch/arm64/boot/dts/qcom/sa8540p-ride.dts
+++ b/arch/arm64/boot/dts/qcom/sa8540p-ride.dts
@@ -17,7 +17,7 @@  / {
 	compatible = "qcom,sa8540p-ride", "qcom,sa8540p";
 
 	aliases {
-		serial0 = &qup2_uart17;
+		serial0 = &uart17;
 	};
 
 	chosen {
@@ -192,11 +192,6 @@  &qup2 {
 	status = "okay";
 };
 
-&qup2_uart17 {
-	compatible = "qcom,geni-debug-uart";
-	status = "okay";
-};
-
 &remoteproc_nsp0 {
 	firmware-name = "qcom/sa8540p/cdsp.mbn";
 	status = "okay";
@@ -207,6 +202,11 @@  &remoteproc_nsp1 {
 	status = "okay";
 };
 
+&uart17 {
+	compatible = "qcom,geni-debug-uart";
+	status = "okay";
+};
+
 &ufs_mem_hc {
 	reset-gpios = <&tlmm 228 GPIO_ACTIVE_LOW>;
 
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
index 551768f97729..db273face248 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
@@ -17,7 +17,7 @@  / {
 	compatible = "qcom,sc8280xp-crd", "qcom,sc8280xp";
 
 	aliases {
-		serial0 = &qup2_uart17;
+		serial0 = &uart17;
 	};
 
 	backlight {
@@ -363,12 +363,6 @@  keyboard@68 {
 	};
 };
 
-&qup2_uart17 {
-	compatible = "qcom,geni-debug-uart";
-
-	status = "okay";
-};
-
 &remoteproc_adsp {
 	firmware-name = "qcom/sc8280xp/qcadsp8280.mbn";
 
@@ -381,6 +375,12 @@  &remoteproc_nsp0 {
 	status = "okay";
 };
 
+&uart17 {
+	compatible = "qcom,geni-debug-uart";
+
+	status = "okay";
+};
+
 &ufs_mem_hc {
 	reset-gpios = <&tlmm 228 GPIO_ACTIVE_LOW>;
 
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
index 109c9d2b684d..951cb1b6fcc4 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
@@ -813,7 +813,7 @@  qup2: geniqup@8c0000 {
 
 			status = "disabled";
 
-			qup2_uart17: serial@884000 {
+			uart17: serial@884000 {
 				compatible = "qcom,geni-uart";
 				reg = <0 0x00884000 0 0x4000>;
 				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;