[v3,02/17] dt-bindings: reset: Fix node descriptions in uniphier-reset example
Commit Message
Prior to adding dt-bindings for SoC-dependent controllers, rename the
reset nodes to the generic names in the example.
And drop redundant examples and a parent node of the reset as it is not
directly necessary.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
---
.../reset/socionext,uniphier-glue-reset.yaml | 23 +++-----
.../reset/socionext,uniphier-reset.yaml | 52 ++-----------------
2 files changed, 11 insertions(+), 64 deletions(-)
Comments
On 13/12/2022 09:24, Kunihiko Hayashi wrote:
> Prior to adding dt-bindings for SoC-dependent controllers, rename the
> reset nodes to the generic names in the example.
>
> And drop redundant examples and a parent node of the reset as it is not
> directly necessary.
>
> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
> ---
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Best regards,
Krzysztof
@@ -95,19 +95,12 @@ required:
examples:
- |
- usb-glue@65b00000 {
- compatible = "simple-mfd";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x65b00000 0x400>;
-
- usb_rst: reset@0 {
- compatible = "socionext,uniphier-ld20-usb3-reset";
- reg = <0x0 0x4>;
- #reset-cells = <1>;
- clock-names = "link";
- clocks = <&sys_clk 14>;
- reset-names = "link";
- resets = <&sys_rst 14>;
- };
+ usb_rst: reset-controller@0 {
+ compatible = "socionext,uniphier-ld20-usb3-reset";
+ reg = <0x0 0x4>;
+ #reset-cells = <1>;
+ clock-names = "link";
+ clocks = <&sys_clk 14>;
+ reset-names = "link";
+ resets = <&sys_rst 14>;
};
@@ -66,53 +66,7 @@ required:
examples:
- |
- sysctrl@61840000 {
- compatible = "socionext,uniphier-sysctrl", "simple-mfd", "syscon";
- reg = <0x61840000 0x4000>;
-
- reset {
- compatible = "socionext,uniphier-ld11-reset";
- #reset-cells = <1>;
- };
-
- // other nodes ...
- };
-
- - |
- mioctrl@59810000 {
- compatible = "socionext,uniphier-mioctrl", "simple-mfd", "syscon";
- reg = <0x59810000 0x800>;
-
- reset {
- compatible = "socionext,uniphier-ld11-mio-reset";
- #reset-cells = <1>;
- };
-
- // other nodes ...
- };
-
- - |
- perictrl@59820000 {
- compatible = "socionext,uniphier-perictrl", "simple-mfd", "syscon";
- reg = <0x59820000 0x200>;
-
- reset {
- compatible = "socionext,uniphier-ld11-peri-reset";
- #reset-cells = <1>;
- };
-
- // other nodes ...
- };
-
- - |
- adamv@57920000 {
- compatible = "socionext,uniphier-ld11-adamv", "simple-mfd", "syscon";
- reg = <0x57920000 0x1000>;
-
- reset {
- compatible = "socionext,uniphier-ld11-adamv-reset";
- #reset-cells = <1>;
- };
-
- // other nodes ...
+ reset-controller {
+ compatible = "socionext,uniphier-ld11-reset";
+ #reset-cells = <1>;
};