diff mbox series

[v2,05/13] arm64: dts: qcom: sc7280: Fix the base addresses of LLCC banks

Message ID 20221212123311.146261-6-manivannan.sadhasivam@linaro.org
State New
Headers
Series Qcom: LLCC/EDAC: Fix base address used for LLCC banks |

Commit Message

Manivannan Sadhasivam Dec. 12, 2022, 12:33 p.m. UTC 
  The LLCC block has several banks each with a different base address
and holes in between. So it is not a correct approach to cover these
banks with a single offset/size. Instead, the individual bank's base
address needs to be specified in devicetree with the exact size.

While at it, let's also fix the size of the llcc_broadcast_base to cover
the whole region.

Also, let's get rid of reg-names property as it is not needed anymore.
The driver is expected to parse the reg field based on index to get the
addresses of each LLCC banks.

Cc: <stable@vger.kernel.org> # 5.13
Fixes: 0392968dbe09 ("arm64: dts: qcom: sc7280: Add device tree node for LLCC")
Reported-by: Parikshit Pareek <quic_ppareek@quicinc.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 arch/arm64/boot/dts/qcom/sc7280.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Comments

Sai Prakash Ranjan Dec. 13, 2022, 5:06 a.m. UTC | #1 
On 12/12/2022 6:03 PM, Manivannan Sadhasivam wrote:
> The LLCC block has several banks each with a different base address
> and holes in between. So it is not a correct approach to cover these
> banks with a single offset/size. Instead, the individual bank's base
> address needs to be specified in devicetree with the exact size.
> 
> While at it, let's also fix the size of the llcc_broadcast_base to cover
> the whole region.
> 
> Also, let's get rid of reg-names property as it is not needed anymore.
> The driver is expected to parse the reg field based on index to get the
> addresses of each LLCC banks.
> 
> Cc: <stable@vger.kernel.org> # 5.13
> Fixes: 0392968dbe09 ("arm64: dts: qcom: sc7280: Add device tree node for LLCC")
> Reported-by: Parikshit Pareek <quic_ppareek@quicinc.com>
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> ---
>   arch/arm64/boot/dts/qcom/sc7280.dtsi | 4 ++--
>   1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> index 0adf13399e64..90e11cbbaf88 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> @@ -3579,8 +3579,8 @@ gem_noc: interconnect@9100000 {
>   
>   		system-cache-controller@9200000 {
>   			compatible = "qcom,sc7280-llcc";
> -			reg = <0 0x09200000 0 0xd0000>, <0 0x09600000 0 0x50000>;
> -			reg-names = "llcc_base", "llcc_broadcast_base";
> +			reg = <0 0x09200000 0 0x58000>, <0 0x09280000 0 0x58000>,
> +			      <0 0x09600000 0 0x58000>;
>   			interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
>   		};
>   

Reviewed-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com>
Krzysztof Kozlowski Dec. 13, 2022, 4:30 p.m. UTC | #2 
On 12/12/2022 13:33, Manivannan Sadhasivam wrote:
> The LLCC block has several banks each with a different base address
> and holes in between. So it is not a correct approach to cover these
> banks with a single offset/size. Instead, the individual bank's base
> address needs to be specified in devicetree with the exact size.
> 
> While at it, let's also fix the size of the llcc_broadcast_base to cover
> the whole region.
> 
> Also, let's get rid of reg-names property as it is not needed anymore.
> The driver is expected to parse the reg field based on index to get the
> addresses of each LLCC banks.
> 
> Cc: <stable@vger.kernel.org> # 5.13
> Fixes: 0392968dbe09 ("arm64: dts: qcom: sc7280: Add device tree node for LLCC")
> Reported-by: Parikshit Pareek <quic_ppareek@quicinc.com>

Same comments here and in all further patches.

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 0adf13399e64..90e11cbbaf88 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -3579,8 +3579,8 @@  gem_noc: interconnect@9100000 {
 
 		system-cache-controller@9200000 {
 			compatible = "qcom,sc7280-llcc";
-			reg = <0 0x09200000 0 0xd0000>, <0 0x09600000 0 0x50000>;
-			reg-names = "llcc_base", "llcc_broadcast_base";
+			reg = <0 0x09200000 0 0x58000>, <0 0x09280000 0 0x58000>,
+			      <0 0x09600000 0 0x58000>;
 			interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
 		};