diff mbox series

[4/9] arm64: dts: qcom: sdm630: Use lowercase hex

Message ID 20221212111037.98160-5-konrad.dybcio@linaro.org
State New
Headers
Series [1/9] arm64: dts: qcom: ipq6018: Use lowercase hex |

Commit Message

Konrad Dybcio Dec. 12, 2022, 11:10 a.m. UTC 
  Use lowercase hex, as that's the preferred and overwhermingly present
style.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 arch/arm64/boot/dts/qcom/sdm630.dtsi | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi
index 13e6a4fbba27..c899ddd5a381 100644
--- a/arch/arm64/boot/dts/qcom/sdm630.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi
@@ -678,7 +678,7 @@  a2noc: interconnect@1704000 {
 
 		mnoc: interconnect@1745000 {
 			compatible = "qcom,sdm660-mnoc";
-			reg = <0x01745000 0xA010>;
+			reg = <0x01745000 0xa010>;
 			#interconnect-cells = <1>;
 			clock-names = "bus", "bus_a", "iface";
 			clocks = <&rpmcc RPM_SMD_MMSSNOC_AXI_CLK>,
@@ -1044,43 +1044,43 @@  opp-775000000 {
 					opp-hz = /bits/ 64 <775000000>;
 					opp-level = <RPM_SMD_LEVEL_TURBO>;
 					opp-peak-kBps = <5412000>;
-					opp-supported-hw = <0xA2>;
+					opp-supported-hw = <0xa2>;
 				};
 				opp-647000000 {
 					opp-hz = /bits/ 64 <647000000>;
 					opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
 					opp-peak-kBps = <4068000>;
-					opp-supported-hw = <0xFF>;
+					opp-supported-hw = <0xff>;
 				};
 				opp-588000000 {
 					opp-hz = /bits/ 64 <588000000>;
 					opp-level = <RPM_SMD_LEVEL_NOM>;
 					opp-peak-kBps = <3072000>;
-					opp-supported-hw = <0xFF>;
+					opp-supported-hw = <0xff>;
 				};
 				opp-465000000 {
 					opp-hz = /bits/ 64 <465000000>;
 					opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
 					opp-peak-kBps = <2724000>;
-					opp-supported-hw = <0xFF>;
+					opp-supported-hw = <0xff>;
 				};
 				opp-370000000 {
 					opp-hz = /bits/ 64 <370000000>;
 					opp-level = <RPM_SMD_LEVEL_SVS>;
 					opp-peak-kBps = <2188000>;
-					opp-supported-hw = <0xFF>;
+					opp-supported-hw = <0xff>;
 				};
 				opp-240000000 {
 					opp-hz = /bits/ 64 <240000000>;
 					opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
 					opp-peak-kBps = <1648000>;
-					opp-supported-hw = <0xFF>;
+					opp-supported-hw = <0xff>;
 				};
 				opp-160000000 {
 					opp-hz = /bits/ 64 <160000000>;
 					opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
 					opp-peak-kBps = <1200000>;
-					opp-supported-hw = <0xFF>;
+					opp-supported-hw = <0xff>;
 				};
 			};
 		};