From patchwork Thu Dec 8 10:40:05 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Tomi Valkeinen X-Patchwork-Id: 31275 Return-Path: Delivered-To: ouuuleilei@gmail.com Received: by 2002:adf:f944:0:0:0:0:0 with SMTP id q4csp122083wrr; Thu, 8 Dec 2022 02:49:19 -0800 (PST) X-Google-Smtp-Source: AA0mqf4y+YhgxVOITp0ST5cBXFYPh/47T+ZrkCWLL+YVO6AR6WKMnM0FQ9VdLzeLN0a3AUMtMNEo X-Received: by 2002:a05:6a00:3029:b0:576:6bff:1c61 with SMTP id ay41-20020a056a00302900b005766bff1c61mr26252354pfb.15.1670496558854; Thu, 08 Dec 2022 02:49:18 -0800 (PST) ARC-Seal: i=1; a=rsa-sha256; t=1670496558; cv=none; d=google.com; s=arc-20160816; b=Qm5DHo+ddFFixUJOvaE4P6bp/pcqvE4sY06cqNEWI1DBmtrww3o5XHgwh9emHd6nO8 Oq9Rc3HUG0YnQ30UM0yJ+IXnIspXMcByJ88/2MGLMozeuPP5E5uXOVgE92aaez1b+Esj SRqtmeb2lHakHqIvxgon8b4BHPF4OHeEzhQVzWqHajaSsX6HdjGJDfL6Lz+EwOreBEiM z+YX5zeThFGdGmAF062fBY9xR7Ux/PBwPzSHqiNa3oTrg74sIQIjldbzLAdf2AXNHGDg az2Lqx7rS1+DPShB/jaOCshFupQvqG1BoGeLo0jOConnz7/prDYJJ6V3a8neW7b2Z6cg DfzQ== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:content-transfer-encoding:mime-version :references:in-reply-to:message-id:date:subject:cc:to:from :dkim-signature; bh=3fPmY4R9pccKOkoiS1yH78+zPIJ5AHPR32fxzHTNeec=; b=htrMviLtA+2devsP8jPr5VwC27jmWnjnOnIvKeG/ZKVsAJk0SrVfZQD9e7OBs7Hr6R S6TeQl9uhQw6L3iOrBOv6EkOWMJH4Soouw/ucZJksaBFHPRv3Wd6cMOuxxfU7Y/APXjT yAIoxVZ8z8FwCKzjnDmM/wq9o6RJBGrX3DJtPAVbtS4wT4DBui5dFmBZD9PAcNweNoa+ 4+YFQ3PxGIhyGpqn5VLn7skmyFyHWP8Q84CQbM2mGu5uglmt6GQGKcABRMv8GWbm0M8t 51QOn/kalaIbOcjvkz4nVq1fwm0053BPYKuN3lhmg0goWLV37zVGQLUAT/6KrZg50/Lo fjdg== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass (test mode) header.i=@ideasonboard.com header.s=mail header.b=WRZDxWU0; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org Received: from out1.vger.email (out1.vger.email. [2620:137:e000::1:20]) by mx.google.com with ESMTP id oc12-20020a17090b1c0c00b00212def0cbedsi4646840pjb.8.2022.12.08.02.49.05; Thu, 08 Dec 2022 02:49:18 -0800 (PST) Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20; Authentication-Results: mx.google.com; dkim=pass (test mode) header.i=@ideasonboard.com header.s=mail header.b=WRZDxWU0; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S229628AbiLHKo0 (ORCPT + 99 others); Thu, 8 Dec 2022 05:44:26 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:50248 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S230177AbiLHKn0 (ORCPT ); Thu, 8 Dec 2022 05:43:26 -0500 Received: from perceval.ideasonboard.com (perceval.ideasonboard.com [IPv6:2001:4b98:dc2:55:216:3eff:fef7:d647]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id E730BB1C5; Thu, 8 Dec 2022 02:40:36 -0800 (PST) Received: from desky.lan (91-154-32-225.elisa-laajakaista.fi [91.154.32.225]) by perceval.ideasonboard.com (Postfix) with ESMTPSA id 99A89143C; Thu, 8 Dec 2022 11:40:32 +0100 (CET) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=ideasonboard.com; s=mail; t=1670496033; bh=/2QV1UTxfblJTvzFVRrceLfzjaiJy4hxzjBoaaL5o9I=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=WRZDxWU031RAuFJ6deMUd6p/x6iXE25HE6QwyXGQd2Q0psIAu9r1lJlk2nEaS57w0 a2l9Gt72mPv/iBZS0qQnkkQ5JoVVOhv1DXQ6Nk7dc3WCqqictxzoavzQGsAhh4ow2F wQMWnOXyvNTzfByKx2qWQNaeOAHLql1LAlanHaoo= From: Tomi Valkeinen To: linux-media@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-i2c@vger.kernel.org, Rob Herring , Krzysztof Kozlowski , Wolfram Sang , Luca Ceresoli , Andy Shevchenko , Matti Vaittinen Cc: Mauro Carvalho Chehab , Peter Rosin , Liam Girdwood , Mark Brown , Sakari Ailus , Laurent Pinchart , Michael Tretter , Shawn Tu , Hans Verkuil , Mike Pagano , =?utf-8?q?Krzysztof_Ha=C5=82asa?= , Marek Vasut , Tomi Valkeinen Subject: [PATCH v5 7/8] media: i2c: add DS90UB913 driver Date: Thu, 8 Dec 2022 12:40:05 +0200 Message-Id: <20221208104006.316606-8-tomi.valkeinen@ideasonboard.com> X-Mailer: git-send-email 2.34.1 In-Reply-To: <20221208104006.316606-1-tomi.valkeinen@ideasonboard.com> References: <20221208104006.316606-1-tomi.valkeinen@ideasonboard.com> MIME-Version: 1.0 X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,SPF_HELO_PASS,SPF_PASS autolearn=ham autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org X-getmail-retrieved-from-mailbox: =?utf-8?q?INBOX?= X-GMAIL-THRID: =?utf-8?q?1751642599796566135?= X-GMAIL-MSGID: =?utf-8?q?1751642599796566135?= Add driver for TI DS90UB913 FPDLink-3 Serializer. Signed-off-by: Tomi Valkeinen --- drivers/media/i2c/Kconfig | 13 + drivers/media/i2c/Makefile | 2 +- drivers/media/i2c/ds90ub913.c | 892 ++++++++++++++++++++++++++++++++++ 3 files changed, 906 insertions(+), 1 deletion(-) create mode 100644 drivers/media/i2c/ds90ub913.c diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig index a23f723b89b5..ff5847aed5ae 100644 --- a/drivers/media/i2c/Kconfig +++ b/drivers/media/i2c/Kconfig @@ -1614,6 +1614,19 @@ config VIDEO_DS90UB960 Device driver for the Texas Instruments DS90UB960 FPD-Link III Deserializer +config VIDEO_DS90UB913 + tristate "TI DS90UB913 Serializer" + depends on OF && I2C && VIDEO_DEV + select MEDIA_CONTROLLER + select VIDEO_V4L2_SUBDEV_API + select V4L2_FWNODE + select REGMAP_I2C + select OF_GPIO + select I2C_ATR + help + Device driver for the Texas Instruments DS90UB913 + FPD-Link III Serializer. + endmenu endif # VIDEO_DEV diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile index 2735b00437bb..376886f2ded6 100644 --- a/drivers/media/i2c/Makefile +++ b/drivers/media/i2c/Makefile @@ -143,4 +143,4 @@ obj-$(CONFIG_VIDEO_VS6624) += vs6624.o obj-$(CONFIG_VIDEO_WM8739) += wm8739.o obj-$(CONFIG_VIDEO_WM8775) += wm8775.o obj-$(CONFIG_VIDEO_DS90UB960) += ds90ub960.o - +obj-$(CONFIG_VIDEO_DS90UB913) += ds90ub913.o diff --git a/drivers/media/i2c/ds90ub913.c b/drivers/media/i2c/ds90ub913.c new file mode 100644 index 000000000000..6001a622e622 --- /dev/null +++ b/drivers/media/i2c/ds90ub913.c @@ -0,0 +1,892 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Driver for the Texas Instruments DS90UB913 video serializer + * + * Based on a driver from Luca Ceresoli + * + * Copyright (c) 2019 Luca Ceresoli + * Copyright (c) 2022 Tomi Valkeinen + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#define UB913_PAD_SINK 0 +#define UB913_PAD_SOURCE 1 + +/* + * UB913 has 4 gpios, but gpios 3 and 4 are reserved for external oscillator + * mode. Thus we only support 2 gpios for now. + */ +#define UB913_NUM_GPIOS 2 + +#define UB913_REG_RESET_CTL 0x01 +#define UB913_REG_RESET_CTL_DIGITAL_RESET_1 BIT(1) +#define UB913_REG_RESET_CTL_DIGITAL_RESET_0 BIT(0) + +#define UB913_REG_GENERAL_CFG 0x03 +#define UB913_REG_MODE_SEL 0x05 + +#define UB913_REG_CRC_ERRORS_LSB 0x0a +#define UB913_REG_CRC_ERRORS_MSB 0x0b + +#define UB913_REG_GENERAL_STATUS 0x0c + +#define UB913_REG_GPIO_CFG(n) (0x0d + (n)) +#define UB913_REG_GPIO_CFG_ENABLE(n) BIT(0 + (n) * 4) +#define UB913_REG_GPIO_CFG_DIR_INPUT(n) BIT(1 + (n) * 4) +#define UB913_REG_GPIO_CFG_REMOTE_EN(n) BIT(2 + (n) * 4) +#define UB913_REG_GPIO_CFG_OUT_VAL(n) BIT(3 + (n) * 4) +#define UB913_REG_GPIO_CFG_MASK(n) (0xf << ((n) * 4)) + +#define UB913_REG_SCL_HIGH_TIME 0x11 +#define UB913_REG_SCL_LOW_TIME 0x12 + +#define UB913_REG_PLL_OVR 0x35 + +struct ub913_data { + struct i2c_client *client; + struct regmap *regmap; + struct clk *clkin; + + u32 gpio_func[UB913_NUM_GPIOS]; + + struct gpio_chip gpio_chip; + char gpio_chip_name[64]; + + struct v4l2_subdev sd; + struct media_pad pads[2]; + + struct v4l2_async_notifier notifier; + + struct v4l2_subdev *source_sd; + + u64 enabled_source_streams; + + struct device_node *tx_ep_np; + + struct clk_hw *clkout_clk_hw; + + struct ds90ub9xx_platform_data *plat_data; + + /* Have we succefully called i2c_atr_add_adapter() */ + bool has_i2c_adapter; +}; + +static inline struct ub913_data *sd_to_ub913(struct v4l2_subdev *sd) +{ + return container_of(sd, struct ub913_data, sd); +} + +static int ub913_read(const struct ub913_data *priv, u8 reg, u8 *val) +{ + unsigned int v; + int ret; + + ret = regmap_read(priv->regmap, reg, &v); + if (ret < 0) { + dev_err(&priv->client->dev, + "Cannot read register 0x%02x: %d!\n", reg, ret); + return ret; + } + + *val = v; + return 0; +} + +static int ub913_write(const struct ub913_data *priv, u8 reg, u8 val) +{ + int ret; + + ret = regmap_write(priv->regmap, reg, val); + if (ret < 0) + dev_err(&priv->client->dev, + "Cannot write register 0x%02x: %d!\n", reg, ret); + + return ret; +} + +/* + * GPIO chip + */ +static int ub913_gpio_get_direction(struct gpio_chip *gc, unsigned int offset) +{ + return GPIO_LINE_DIRECTION_OUT; +} + +static int ub913_gpio_direction_out(struct gpio_chip *gc, unsigned int offset, + int value) +{ + struct ub913_data *priv = gpiochip_get_data(gc); + unsigned int reg_idx; + unsigned int field_idx; + int ret; + + reg_idx = offset / 2; + field_idx = offset % 2; + + ret = regmap_update_bits( + priv->regmap, UB913_REG_GPIO_CFG(reg_idx), + UB913_REG_GPIO_CFG_MASK(field_idx), + UB913_REG_GPIO_CFG_ENABLE(field_idx) | + (value ? UB913_REG_GPIO_CFG_OUT_VAL(field_idx) : 0)); + + return ret; +} + +static void ub913_gpio_set(struct gpio_chip *gc, unsigned int offset, int value) +{ + ub913_gpio_direction_out(gc, offset, value); +} + +static int ub913_gpio_of_xlate(struct gpio_chip *gc, + const struct of_phandle_args *gpiospec, + u32 *flags) +{ + if (flags) + *flags = gpiospec->args[1]; + + return gpiospec->args[0]; +} + +static int ub913_gpiochip_probe(struct ub913_data *priv) +{ + struct device *dev = &priv->client->dev; + struct gpio_chip *gc = &priv->gpio_chip; + int ret; + + /* Initialize GPIOs 0 and 1 to local control, tri-state */ + ub913_write(priv, UB913_REG_GPIO_CFG(0), 0); + + scnprintf(priv->gpio_chip_name, sizeof(priv->gpio_chip_name), "%s", + dev_name(dev)); + + gc->label = priv->gpio_chip_name; + gc->parent = dev; + gc->owner = THIS_MODULE; + gc->base = -1; + gc->can_sleep = 1; + gc->ngpio = UB913_NUM_GPIOS; + gc->get_direction = ub913_gpio_get_direction; + gc->direction_output = ub913_gpio_direction_out; + gc->set = ub913_gpio_set; + gc->of_xlate = ub913_gpio_of_xlate; + gc->of_node = priv->client->dev.of_node; + gc->of_gpio_n_cells = 2; + + ret = gpiochip_add_data(gc, priv); + if (ret) { + dev_err(dev, "Failed to add GPIOs: %d\n", ret); + return ret; + } + + return 0; +} + +static void ub913_gpiochip_remove(struct ub913_data *priv) +{ + gpiochip_remove(&priv->gpio_chip); +} + +static int ub913_parse_dt(struct ub913_data *priv) +{ + struct device_node *np = priv->client->dev.of_node; + struct device *dev = &priv->client->dev; + int ret; + + if (!np) { + dev_err(dev, "OF: no device tree node!\n"); + return -ENOENT; + } + + /* optional, if absent all GPIO pins are unused */ + ret = of_property_read_u32_array(np, "gpio-functions", priv->gpio_func, + ARRAY_SIZE(priv->gpio_func)); + if (ret && ret != -EINVAL) + dev_err(dev, "DT: invalid gpio-functions property (%d)", ret); + + return 0; +} + +static const struct regmap_config ub913_regmap_config = { + .name = "ds90ub913", + .reg_bits = 8, + .val_bits = 8, + .reg_format_endian = REGMAP_ENDIAN_DEFAULT, + .val_format_endian = REGMAP_ENDIAN_DEFAULT, +}; + +/* + * V4L2 + */ + +static int ub913_enable_streams(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state, u32 pad, + u64 streams_mask) +{ + struct ub913_data *priv = sd_to_ub913(sd); + struct media_pad *remote_pad; + u64 sink_streams; + int ret; + + if (streams_mask & priv->enabled_source_streams) + return -EALREADY; + + sink_streams = v4l2_subdev_state_xlate_streams( + state, UB913_PAD_SOURCE, UB913_PAD_SINK, &streams_mask); + + remote_pad = media_pad_remote_pad_first(&priv->pads[UB913_PAD_SINK]); + + ret = v4l2_subdev_enable_streams(priv->source_sd, remote_pad->index, + sink_streams); + if (ret) + return ret; + + priv->enabled_source_streams |= streams_mask; + + return 0; +} + +static int ub913_disable_streams(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state, u32 pad, + u64 streams_mask) +{ + struct ub913_data *priv = sd_to_ub913(sd); + struct media_pad *remote_pad; + int ret; + u64 sink_streams; + + if ((streams_mask & priv->enabled_source_streams) != streams_mask) + return -EALREADY; + + sink_streams = v4l2_subdev_state_xlate_streams( + state, UB913_PAD_SOURCE, UB913_PAD_SINK, &streams_mask); + + remote_pad = media_pad_remote_pad_first(&priv->pads[UB913_PAD_SINK]); + + ret = v4l2_subdev_disable_streams(priv->source_sd, remote_pad->index, + sink_streams); + if (ret) + return ret; + + priv->enabled_source_streams &= ~streams_mask; + + return 0; +} + +static int _ub913_set_routing(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state, + struct v4l2_subdev_krouting *routing) +{ + const struct v4l2_mbus_framefmt format = { + .width = 640, + .height = 480, + .code = MEDIA_BUS_FMT_UYVY8_2X8, + .field = V4L2_FIELD_NONE, + .colorspace = V4L2_COLORSPACE_SRGB, + .ycbcr_enc = V4L2_YCBCR_ENC_601, + .quantization = V4L2_QUANTIZATION_LIM_RANGE, + .xfer_func = V4L2_XFER_FUNC_SRGB, + }; + int ret; + + /* + * Note: we can only support up to V4L2_FRAME_DESC_ENTRY_MAX, until + * frame desc is made dynamically allocated. + */ + + if (routing->num_routes > V4L2_FRAME_DESC_ENTRY_MAX) + return -EINVAL; + + ret = v4l2_subdev_routing_validate(sd, routing, + V4L2_SUBDEV_ROUTING_ONLY_1_TO_1); + if (ret) + return ret; + + ret = v4l2_subdev_set_routing_with_fmt(sd, state, routing, &format); + if (ret) + return ret; + + return 0; +} + +static int ub913_set_routing(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state, + enum v4l2_subdev_format_whence which, + struct v4l2_subdev_krouting *routing) +{ + struct ub913_data *priv = sd_to_ub913(sd); + + if (which == V4L2_SUBDEV_FORMAT_ACTIVE && priv->enabled_source_streams) + return -EBUSY; + + return _ub913_set_routing(sd, state, routing); +} + +static int ub913_get_source_frame_desc(struct ub913_data *priv, + struct v4l2_mbus_frame_desc *desc) +{ + struct media_pad *pad; + int ret; + + pad = media_pad_remote_pad_first(&priv->pads[UB913_PAD_SINK]); + if (!pad) + return -EPIPE; + + ret = v4l2_subdev_call(priv->source_sd, pad, get_frame_desc, pad->index, + desc); + if (ret) + return ret; + + return 0; +} + +static int ub913_get_frame_desc(struct v4l2_subdev *sd, unsigned int pad, + struct v4l2_mbus_frame_desc *fd) +{ + struct ub913_data *priv = sd_to_ub913(sd); + const struct v4l2_subdev_krouting *routing; + struct v4l2_mbus_frame_desc source_fd; + struct v4l2_subdev_route *route; + struct v4l2_subdev_state *state; + int ret = 0; + + if (pad != 1) /* first tx pad */ + return -EINVAL; + + ret = ub913_get_source_frame_desc(priv, &source_fd); + if (ret) + return ret; + + state = v4l2_subdev_lock_and_get_active_state(sd); + + routing = &state->routing; + + memset(fd, 0, sizeof(*fd)); + + fd->type = V4L2_MBUS_FRAME_DESC_TYPE_PARALLEL; + + for_each_active_route(routing, route) { + unsigned int j; + + if (route->source_pad != pad) + continue; + + for (j = 0; j < source_fd.num_entries; ++j) + if (source_fd.entry[j].stream == route->sink_stream) + break; + + if (j == source_fd.num_entries) { + dev_err(&priv->client->dev, + "Failed to find stream from source frame desc\n"); + ret = -EPIPE; + goto out; + } + + fd->entry[fd->num_entries].stream = route->source_stream; + + fd->entry[fd->num_entries].flags = + V4L2_MBUS_FRAME_DESC_FL_LEN_MAX; + fd->entry[fd->num_entries].length = source_fd.entry[j].length; + fd->entry[fd->num_entries].pixelcode = + source_fd.entry[j].pixelcode; + + fd->num_entries++; + } + +out: + v4l2_subdev_unlock_state(state); + + return ret; +} + +static int ub913_set_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state, + struct v4l2_subdev_format *format) +{ + struct ub913_data *priv = sd_to_ub913(sd); + struct v4l2_mbus_framefmt *fmt; + + if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE && + priv->enabled_source_streams) + return -EBUSY; + + /* No transcoding, source and sink formats must match. */ + if (format->pad == 1) + return v4l2_subdev_get_fmt(sd, state, format); + + /* Set sink format */ + fmt = v4l2_subdev_state_get_stream_format(state, format->pad, + format->stream); + if (!fmt) + return -EINVAL; + + *fmt = format->format; + + /* Propagate to source format */ + fmt = v4l2_subdev_state_get_opposite_stream_format(state, format->pad, + format->stream); + if (!fmt) + return -EINVAL; + + *fmt = format->format; + + return 0; +} + +static int ub913_init_cfg(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state) +{ + struct v4l2_subdev_route routes[] = { + { + .sink_pad = 0, + .sink_stream = 0, + .source_pad = 1, + .source_stream = 0, + .flags = V4L2_SUBDEV_ROUTE_FL_ACTIVE, + }, + }; + + struct v4l2_subdev_krouting routing = { + .num_routes = ARRAY_SIZE(routes), + .routes = routes, + }; + + return _ub913_set_routing(sd, state, &routing); +} + +static int ub913_log_status(struct v4l2_subdev *sd) +{ + struct ub913_data *priv = sd_to_ub913(sd); + struct device *dev = &priv->client->dev; + u8 v, v1, v2; + + ub913_read(priv, UB913_REG_MODE_SEL, &v); + dev_info(dev, "MODE_SEL %#x\n", v); + + ub913_read(priv, UB913_REG_CRC_ERRORS_LSB, &v1); + ub913_read(priv, UB913_REG_CRC_ERRORS_MSB, &v2); + dev_info(dev, "CRC errors %u\n", v1 | (v2 << 8)); + + ub913_read(priv, UB913_REG_GENERAL_STATUS, &v); + dev_info(dev, "GENERAL_STATUS %#x\n", v); + + ub913_read(priv, UB913_REG_PLL_OVR, &v); + dev_info(dev, "PLL_OVR %#x\n", v); + + /* clear CRC errors */ + ub913_read(priv, UB913_REG_GENERAL_CFG, &v); + ub913_write(priv, UB913_REG_GENERAL_CFG, v | BIT(5)); + ub913_write(priv, UB913_REG_GENERAL_CFG, v); + + return 0; +} + +static const struct v4l2_subdev_core_ops ub913_subdev_core_ops = { + .log_status = ub913_log_status, +}; + +static const struct v4l2_subdev_pad_ops ub913_pad_ops = { + .enable_streams = ub913_enable_streams, + .disable_streams = ub913_disable_streams, + .set_routing = ub913_set_routing, + .get_frame_desc = ub913_get_frame_desc, + .get_fmt = v4l2_subdev_get_fmt, + .set_fmt = ub913_set_fmt, + .init_cfg = ub913_init_cfg, +}; + +static const struct v4l2_subdev_ops ub913_subdev_ops = { + .core = &ub913_subdev_core_ops, + .pad = &ub913_pad_ops, +}; + +static const struct media_entity_operations ub913_entity_ops = { + .link_validate = v4l2_subdev_link_validate, +}; + +static int ub913_notify_bound(struct v4l2_async_notifier *notifier, + struct v4l2_subdev *source_subdev, + struct v4l2_async_subdev *asd) +{ + struct ub913_data *priv = sd_to_ub913(notifier->sd); + struct device *dev = &priv->client->dev; + unsigned int src_pad; + int ret; + + dev_dbg(dev, "Bind %s\n", source_subdev->name); + + ret = media_entity_get_fwnode_pad(&source_subdev->entity, + source_subdev->fwnode, + MEDIA_PAD_FL_SOURCE); + if (ret < 0) { + dev_err(dev, "Failed to find pad for %s\n", + source_subdev->name); + return ret; + } + + priv->source_sd = source_subdev; + src_pad = ret; + + ret = media_create_pad_link(&source_subdev->entity, src_pad, + &priv->sd.entity, 0, + MEDIA_LNK_FL_ENABLED | + MEDIA_LNK_FL_IMMUTABLE); + if (ret) { + dev_err(dev, "Unable to link %s:%u -> %s:0\n", + source_subdev->name, src_pad, priv->sd.name); + return ret; + } + + dev_dbg(dev, "Bound %s:%u\n", source_subdev->name, src_pad); + + dev_dbg(dev, "All subdevs bound\n"); + + return 0; +} + +static void ub913_notify_unbind(struct v4l2_async_notifier *notifier, + struct v4l2_subdev *source_subdev, + struct v4l2_async_subdev *asd) +{ + struct ub913_data *priv = sd_to_ub913(notifier->sd); + struct device *dev = &priv->client->dev; + + dev_dbg(dev, "Unbind %s\n", source_subdev->name); +} + +static const struct v4l2_async_notifier_operations ub913_notify_ops = { + .bound = ub913_notify_bound, + .unbind = ub913_notify_unbind, +}; + +static int ub913_v4l2_notifier_register(struct ub913_data *priv) +{ + struct device *dev = &priv->client->dev; + struct v4l2_async_subdev *asd; + struct device_node *ep_node; + int ret; + + dev_dbg(dev, "register async notif\n"); + + ep_node = of_graph_get_endpoint_by_regs(dev->of_node, 0, 0); + if (!ep_node) { + dev_err(dev, "No graph endpoint\n"); + return -ENODEV; + } + + v4l2_async_nf_init(&priv->notifier); + + asd = v4l2_async_nf_add_fwnode_remote(&priv->notifier, + of_fwnode_handle(ep_node), + struct v4l2_async_subdev); + + of_node_put(ep_node); + + if (IS_ERR(asd)) { + dev_err(dev, "Failed to add subdev: %ld", PTR_ERR(asd)); + v4l2_async_nf_cleanup(&priv->notifier); + return PTR_ERR(asd); + } + + priv->notifier.ops = &ub913_notify_ops; + + ret = v4l2_async_subdev_nf_register(&priv->sd, &priv->notifier); + if (ret) { + dev_err(dev, "Failed to register subdev_notifier"); + v4l2_async_nf_cleanup(&priv->notifier); + return ret; + } + + return 0; +} + +static void ub913_v4l2_nf_unregister(struct ub913_data *priv) +{ + struct device *dev = &priv->client->dev; + + dev_dbg(dev, "Unregister async notif\n"); + + v4l2_async_nf_unregister(&priv->notifier); + v4l2_async_nf_cleanup(&priv->notifier); +} + +static int ub913_register_clkout(struct ub913_data *priv) +{ + struct device *dev = &priv->client->dev; + const char *name; + int ret; + + name = kasprintf(GFP_KERNEL, "ds90ub913.%s.clk_out", dev_name(dev)); + + priv->clkout_clk_hw = devm_clk_hw_register_fixed_factor(dev, name, + __clk_get_name(priv->clkin), 0, 1, 2); + + kfree(name); + + if (IS_ERR(priv->clkout_clk_hw)) + return dev_err_probe(dev, PTR_ERR(priv->clkout_clk_hw), + "Cannot register clkout hw\n"); + + ret = devm_of_clk_add_hw_provider(dev, of_clk_hw_simple_get, + priv->clkout_clk_hw); + if (ret) + return dev_err_probe(dev, ret, + "Cannot add OF clock provider\n"); + + return 0; +} + +static int ub913_i2c_master_init(struct ub913_data *priv) +{ + /* i2c fast mode */ + u32 scl_high = 600 + 300; /* high period + rise time, ns */ + u32 scl_low = 1300 + 300; /* low period + fall time, ns */ + unsigned long ref; + int ret; + + ref = clk_get_rate(priv->clkin) / 2; + + scl_high = div64_u64((u64)scl_high * ref, 1000000000); + scl_low = div64_u64((u64)scl_low * ref, 1000000000); + + ret = ub913_write(priv, UB913_REG_SCL_HIGH_TIME, scl_high); + if (ret) + return ret; + + ret = ub913_write(priv, UB913_REG_SCL_LOW_TIME, scl_low); + if (ret) + return ret; + + return 0; +} + +static int ub913_add_i2c_adapter(struct ub913_data *priv) +{ + struct device *dev = &priv->client->dev; + struct fwnode_handle *i2c_handle; + int ret; + + i2c_handle = device_get_named_child_node(dev, "i2c"); + if (!i2c_handle) + return 0; + + ret = i2c_atr_add_adapter(priv->plat_data->atr, priv->plat_data->port, + i2c_handle); + + fwnode_handle_put(i2c_handle); + + if (ret) + return ret; + + priv->has_i2c_adapter = true; + + return 0; +} + +static void ub913_remove_i2c_adapter(struct ub913_data *priv) +{ + if (priv->has_i2c_adapter) + i2c_atr_del_adapter(priv->plat_data->atr, + priv->plat_data->port); +} + +static int ub913_probe(struct i2c_client *client) +{ + struct device *dev = &client->dev; + struct ub913_data *priv; + int ret; + u8 v; + bool mode_override; + u8 mode; + + dev_dbg(dev, "probing, addr 0x%02x\n", client->addr); + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->client = client; + + priv->plat_data = dev_get_platdata(&client->dev); + if (!priv->plat_data) { + dev_err(dev, "Platform data missing\n"); + return -ENODEV; + } + + priv->regmap = devm_regmap_init_i2c(client, &ub913_regmap_config); + if (IS_ERR(priv->regmap)) { + dev_err(dev, "Failed to init regmap\n"); + return PTR_ERR(priv->regmap); + } + + /* ub913 can also work without ext clock, but that is not supported */ + priv->clkin = devm_clk_get(dev, "clkin"); + if (IS_ERR(priv->clkin)) { + ret = PTR_ERR(priv->clkin); + if (ret != -EPROBE_DEFER) + dev_err(dev, "Cannot get CLKIN (%d)", ret); + return ret; + } + + ret = ub913_parse_dt(priv); + if (ret) + return ret; + + ret = ub913_read(priv, UB913_REG_MODE_SEL, &v); + if (ret) + return ret; + + if (!(v & BIT(4))) { + dev_err(dev, "Mode value not stabilized\n"); + return -ENODEV; + } + + mode_override = v & BIT(5); + mode = v & 0xf; + + dev_dbg(dev, "mode from %s: %#x\n", + mode_override ? "reg" : "deserializer", mode); + + ret = ub913_i2c_master_init(priv); + if (ret) { + dev_err(dev, "i2c master init failed: %d\n", ret); + return ret; + } + + ret = ub913_gpiochip_probe(priv); + if (ret) { + dev_err(dev, "Failed to init gpiochip\n"); + return ret; + } + + ret = ub913_register_clkout(priv); + if (ret) { + dev_err(dev, "Failed to register clkout\n"); + goto err_gpiochip_remove; + } + + v4l2_i2c_subdev_init(&priv->sd, priv->client, &ub913_subdev_ops); + priv->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_STREAMS; + priv->sd.entity.function = MEDIA_ENT_F_VID_IF_BRIDGE; + priv->sd.entity.ops = &ub913_entity_ops; + + priv->pads[0].flags = MEDIA_PAD_FL_SINK; + priv->pads[1].flags = MEDIA_PAD_FL_SOURCE; + + ret = media_entity_pads_init(&priv->sd.entity, 2, priv->pads); + if (ret) { + dev_err(dev, "Failed to init pads\n"); + goto err_gpiochip_remove; + } + + priv->tx_ep_np = of_graph_get_endpoint_by_regs(dev->of_node, 1, 0); + if (priv->tx_ep_np) + priv->sd.fwnode = of_fwnode_handle(priv->tx_ep_np); + + ret = v4l2_subdev_init_finalize(&priv->sd); + if (ret) + goto err_entity_cleanup; + + ret = ub913_v4l2_notifier_register(priv); + if (ret) { + dev_err(dev, "v4l2 subdev notifier register failed: %d\n", ret); + goto err_free_state; + } + + ret = v4l2_async_register_subdev(&priv->sd); + if (ret) { + dev_err(dev, "v4l2_async_register_subdev error: %d\n", ret); + goto err_unreg_notif; + } + + ret = ub913_add_i2c_adapter(priv); + if (ret) { + dev_err(dev, "failed to add remote i2c adapter\n"); + goto err_unreg_async_subdev; + } + + dev_dbg(dev, "Successfully probed\n"); + + return 0; + +err_unreg_async_subdev: + v4l2_async_unregister_subdev(&priv->sd); +err_unreg_notif: + ub913_v4l2_nf_unregister(priv); +err_free_state: + v4l2_subdev_cleanup(&priv->sd); +err_entity_cleanup: + if (priv->tx_ep_np) + of_node_put(priv->tx_ep_np); + + media_entity_cleanup(&priv->sd.entity); +err_gpiochip_remove: + ub913_gpiochip_remove(priv); + + return ret; +} + +static void ub913_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct ub913_data *priv = sd_to_ub913(sd); + + dev_dbg(&client->dev, "Removing\n"); + + ub913_remove_i2c_adapter(priv); + + v4l2_async_unregister_subdev(&priv->sd); + + ub913_v4l2_nf_unregister(priv); + + v4l2_subdev_cleanup(&priv->sd); + + if (priv->tx_ep_np) + of_node_put(priv->tx_ep_np); + + media_entity_cleanup(&priv->sd.entity); + + ub913_gpiochip_remove(priv); +} + +static const struct i2c_device_id ub913_id[] = { { "ds90ub913a-q1", 0 }, {} }; +MODULE_DEVICE_TABLE(i2c, ub913_id); + +#ifdef CONFIG_OF +static const struct of_device_id ub913_dt_ids[] = { + { .compatible = "ti,ds90ub913a-q1", }, + {} +}; +MODULE_DEVICE_TABLE(of, ub913_dt_ids); +#endif + +static struct i2c_driver ds90ub913_driver = { + .probe_new = ub913_probe, + .remove = ub913_remove, + .id_table = ub913_id, + .driver = { + .name = "ds90ub913a", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(ub913_dt_ids), + }, +}; + +module_i2c_driver(ds90ub913_driver); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Texas Instruments DS90UB913 serializer driver"); +MODULE_AUTHOR("Luca Ceresoli "); +MODULE_AUTHOR("Tomi Valkeinen ");