diff mbox series

[v7,tty-next,1/4] serial: 8250_pci: Add serial8250_pci_setup_port definition in 8250_pcilib.c

Message ID 20221207235305.695541-2-kumaravel.thiagarajan@microchip.com
State New
Headers
Series serial: 8250_pci1xxxx: Add driver for the pci1xxxx's quad-uart function |

Commit Message

Kumaravel Thiagarajan Dec. 7, 2022, 11:53 p.m. UTC 
  Move implementation of setup_port func() to serial8250_pci_setup_port.

Co-developed-by: Tharun Kumar P <tharunkumar.pasumarthi@microchip.com>
Signed-off-by: Tharun Kumar P <tharunkumar.pasumarthi@microchip.com>
Signed-off-by: Kumaravel Thiagarajan <kumaravel.thiagarajan@microchip.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
---
Changes in v7:
- Used namespace 'SERIAL_8250_PCI' while exporting and importing symbols
- Included structures used in function declaration in 8250_pcilib.h file

Changes in v6:
- Made this patch first patch of the patch series

Changes in v5:
- This is the new patch added in v5 version of this patchset
- Moved implementation of setup_port from 8250_pci.c to 8250_pcilib.c
---
 drivers/tty/serial/8250/8250_pci.c    | 25 +++---------------
 drivers/tty/serial/8250/8250_pcilib.c | 38 +++++++++++++++++++++++++++
 drivers/tty/serial/8250/8250_pcilib.h | 15 +++++++++++
 drivers/tty/serial/8250/Kconfig       |  4 +++
 drivers/tty/serial/8250/Makefile      |  1 +
 5 files changed, 61 insertions(+), 22 deletions(-)
 create mode 100644 drivers/tty/serial/8250/8250_pcilib.c
 create mode 100644 drivers/tty/serial/8250/8250_pcilib.h

Comments

Andy Shevchenko Dec. 7, 2022, 11:36 a.m. UTC | #1 
On Thu, Dec 08, 2022 at 05:23:02AM +0530, Kumaravel Thiagarajan wrote:
> Move implementation of setup_port func() to serial8250_pci_setup_port.
> 
> Co-developed-by: Tharun Kumar P <tharunkumar.pasumarthi@microchip.com>
> Signed-off-by: Tharun Kumar P <tharunkumar.pasumarthi@microchip.com>
> Signed-off-by: Kumaravel Thiagarajan <kumaravel.thiagarajan@microchip.com>
> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

(One nit-pick below, though)

...

>  config SERIAL_8250_PCI
>  	tristate "8250/16550 PCI device support"
>  	depends on SERIAL_8250 && PCI
> +	select SERIAL_8250_PCILIB
>  	default SERIAL_8250
>  	help
>  	  This builds standard PCI serial support. You may be able to
> @@ -500,6 +501,9 @@ config SERIAL_8250_MID
>  	  Intel Medfield SOC and various other Intel platforms that is not
>  	  covered by the more generic SERIAL_8250_PCI option.
>  
> +config SERIAL_8250_PCILIB
> +	bool
> +

Not sure why it's here and not just above 8250_PCI, but it's minor thing.

>  	tristate "Support for Pericom and Acces I/O serial ports"
>  	default SERIAL_8250
diff mbox series

Patch

diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 6f66dc2ebacc..58cc9e19bd20 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -24,6 +24,7 @@ 
 #include <asm/io.h>
 
 #include "8250.h"
+#include "8250_pcilib.h"
 
 /*
  * init function returns:
@@ -89,28 +90,7 @@  static int
 setup_port(struct serial_private *priv, struct uart_8250_port *port,
 	   u8 bar, unsigned int offset, int regshift)
 {
-	struct pci_dev *dev = priv->dev;
-
-	if (bar >= PCI_STD_NUM_BARS)
-		return -EINVAL;
-
-	if (pci_resource_flags(dev, bar) & IORESOURCE_MEM) {
-		if (!pcim_iomap(dev, bar, 0) && !pcim_iomap_table(dev))
-			return -ENOMEM;
-
-		port->port.iotype = UPIO_MEM;
-		port->port.iobase = 0;
-		port->port.mapbase = pci_resource_start(dev, bar) + offset;
-		port->port.membase = pcim_iomap_table(dev)[bar] + offset;
-		port->port.regshift = regshift;
-	} else {
-		port->port.iotype = UPIO_PORT;
-		port->port.iobase = pci_resource_start(dev, bar) + offset;
-		port->port.mapbase = 0;
-		port->port.membase = NULL;
-		port->port.regshift = 0;
-	}
-	return 0;
+	return serial8250_pci_setup_port(priv->dev, port, bar, offset, regshift);
 }
 
 /*
@@ -5759,3 +5739,4 @@  module_pci_driver(serial_pci_driver);
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Generic 8250/16x50 PCI serial probe module");
 MODULE_DEVICE_TABLE(pci, serial_pci_tbl);
+MODULE_IMPORT_NS(SERIAL_8250_PCI);
diff --git a/drivers/tty/serial/8250/8250_pcilib.c b/drivers/tty/serial/8250/8250_pcilib.c
new file mode 100644
index 000000000000..090385172a09
--- /dev/null
+++ b/drivers/tty/serial/8250/8250_pcilib.c
@@ -0,0 +1,38 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * 8250 PCI library.
+ *
+ * Copyright (C) 2001 Russell King, All Rights Reserved.
+ */
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/pci.h>
+#include <linux/types.h>
+
+#include "8250.h"
+
+int serial8250_pci_setup_port(struct pci_dev *dev, struct uart_8250_port *port,
+		   u8 bar, unsigned int offset, int regshift)
+{
+	if (bar >= PCI_STD_NUM_BARS)
+		return -EINVAL;
+
+	if (pci_resource_flags(dev, bar) & IORESOURCE_MEM) {
+		if (!pcim_iomap(dev, bar, 0) && !pcim_iomap_table(dev))
+			return -ENOMEM;
+
+		port->port.iotype = UPIO_MEM;
+		port->port.iobase = 0;
+		port->port.mapbase = pci_resource_start(dev, bar) + offset;
+		port->port.membase = pcim_iomap_table(dev)[bar] + offset;
+		port->port.regshift = regshift;
+	} else {
+		port->port.iotype = UPIO_PORT;
+		port->port.iobase = pci_resource_start(dev, bar) + offset;
+		port->port.mapbase = 0;
+		port->port.membase = NULL;
+		port->port.regshift = 0;
+	}
+	return 0;
+}
+EXPORT_SYMBOL_NS_GPL(serial8250_pci_setup_port, SERIAL_8250_PCI);
diff --git a/drivers/tty/serial/8250/8250_pcilib.h b/drivers/tty/serial/8250/8250_pcilib.h
new file mode 100644
index 000000000000..1aaf1b50ce9c
--- /dev/null
+++ b/drivers/tty/serial/8250/8250_pcilib.h
@@ -0,0 +1,15 @@ 
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * 8250 PCI library header file.
+ *
+ * Copyright (C) 2001 Russell King, All Rights Reserved.
+ */
+
+#include <linux/types.h>
+
+struct pci_dev;
+
+struct uart_8250_port;
+
+int serial8250_pci_setup_port(struct pci_dev *dev, struct uart_8250_port *port, u8 bar,
+		   unsigned int offset, int regshift);
diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index d0b49e15fbf5..3088eaff3ad0 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -132,6 +132,7 @@  config SERIAL_8250_DMA
 config SERIAL_8250_PCI
 	tristate "8250/16550 PCI device support"
 	depends on SERIAL_8250 && PCI
+	select SERIAL_8250_PCILIB
 	default SERIAL_8250
 	help
 	  This builds standard PCI serial support. You may be able to
@@ -500,6 +501,9 @@  config SERIAL_8250_MID
 	  Intel Medfield SOC and various other Intel platforms that is not
 	  covered by the more generic SERIAL_8250_PCI option.
 
+config SERIAL_8250_PCILIB
+	bool
+
 config SERIAL_8250_PERICOM
 	tristate "Support for Pericom and Acces I/O serial ports"
 	default SERIAL_8250
diff --git a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile
index bee908f99ea0..b9179d1f104b 100644
--- a/drivers/tty/serial/8250/Makefile
+++ b/drivers/tty/serial/8250/Makefile
@@ -12,6 +12,7 @@  obj-$(CONFIG_SERIAL_8250)		+= 8250.o 8250_base.o
 8250_base-$(CONFIG_SERIAL_8250_DMA)	+= 8250_dma.o
 8250_base-$(CONFIG_SERIAL_8250_DWLIB)	+= 8250_dwlib.o
 8250_base-$(CONFIG_SERIAL_8250_FINTEK)	+= 8250_fintek.o
+8250_base-$(CONFIG_SERIAL_8250_PCILIB)	+= 8250_pcilib.o
 obj-$(CONFIG_SERIAL_8250_GSC)		+= 8250_gsc.o
 obj-$(CONFIG_SERIAL_8250_PCI)		+= 8250_pci.o
 obj-$(CONFIG_SERIAL_8250_EXAR)		+= 8250_exar.o