[RFC,2/3] pinctrl: Add support pin control for UP board CPLD/FPGA

Message ID 20221207163359.26564-3-larry.lai@yunjingtech.com
State New
Headers
Series Add support control UP board CPLD/FPGA pin control |

Commit Message

larry.lai Dec. 7, 2022, 4:33 p.m. UTC
  The UP Squared board <http://www.upboard.com> implements certain
features (pin control) through an on-board FPGA.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: larry.lai <larry.lai@yunjingtech.com>
---
PATCH V3 -> RFC 2022/11/23:
(1) Refer 2022/11/09 Linus Walleij review, cleaned up coding style and
addressed review comments.

PATCH V2 -> V3:
There's no change.

PATCH V1 -> V2:
(1) Synchronized with upboard github to rc2
(2) Refer 2022/10/19 Mark Brown and Andy Shevchenko review, we removed
the regmap and acpi patches and implement in upboard pinctrl driver.
(3) Refer 2022/10/19 Andy Shevchenko review, fixed the coding style
issues, removed using gpio_xxxx API and removed including <linux/gpio.h>.
---
 drivers/pinctrl/Kconfig           |   14 +
 drivers/pinctrl/Makefile          |    1 +
 drivers/pinctrl/pinctrl-upboard.c | 1384 +++++++++++++++++++++++++++++
 3 files changed, 1399 insertions(+)
 create mode 100644 drivers/pinctrl/pinctrl-upboard.c
  

Comments

Andy Shevchenko Dec. 7, 2022, 9:32 p.m. UTC | #1
On Thu, Dec 08, 2022 at 12:33:58AM +0800, larry.lai wrote:
> The UP Squared board <http://www.upboard.com> implements certain
> features (pin control) through an on-board FPGA.

(I already reviewed previous version and you have my tag, but some new comments
 which may be already answered, sorry for the repetition in such cases).

Actually... based on the below comments I have to withdraw my tag.
This driver may not go into upstream in the current form.

I'm puzzled if it's indeed the code I have reviewed?

...

> +#include <linux/acpi.h>

This is actually not needed, but property.h.
See below how.

...

> +static int upboard_fpga_request_enable(struct pinctrl_dev *pctldev,
> +				       struct pinctrl_gpio_range *range,
> +				       unsigned int pin)
> +{
> +	const struct pin_desc * const pd = pin_desc_get(pctldev, pin);
> +	const struct upboard_pin *p;
> +	int ret;

> +	if (!pd)
> +		return -EINVAL;

When this can be true?
Ditto for other functions with this conditional.

> +	p = pd->drv_data;
> +	if (p->funcbit) {
> +		ret = regmap_field_write(p->funcbit, 0);
> +		if (ret)
> +			return ret;
> +	}
> +
> +	if (p->enbit) {
> +		ret = regmap_field_write(p->enbit, 1);
> +		if (ret)
> +			return ret;
> +	}
> +
> +	return 0;
> +};

...

> +	struct upboard_pinctrl *pctrl = container_of(gc, struct upboard_pinctrl, chip);

Don't you set a private data of GPIO chip to point to your custom structure?

Either way, I would recommend to make gpio_chip a first member in your
upboard_pinctrl.

...

> +			int mode = 1;

See below about default.

> +			unsigned int val;
> +
> +			switch (pctrl->ident) {
> +			case 15:
> +				mode = 2;
> +			break;
> +			}

Wrong indentation, missing default.
Same for the rest below.

> +		} else if (strstr(pctrl->pctldesc->pins[offset[i]].name,
> +				  "UART")) {

One line would be better to read, same for the rest below.

...

> +		/* input pins */
> +		if (strstr(pctrl->pctldesc->pins[offset[i]].name, "RX"))
> +			input = true;
> +		if (strstr(pctrl->pctldesc->pins[offset[i]].name, "CTS"))
> +			input = true;
> +		if (strstr(pctrl->pctldesc->pins[offset[i]].name, "ADC"))
> +			input = true;
> +		if (strstr(pctrl->pctldesc->pins[offset[i]].name, "MISO"))
> +			input = true;
> +		if (strstr(pctrl->pctldesc->pins[offset[i]].name, "DIN"))
> +			input = true;

Can you have this in some static const data structure that is associated with
pin list?

...

> +static void upboard_gpio_free(struct gpio_chip *gc, unsigned int offset)
> +{
> +	struct upboard_pinctrl *pctrl = container_of(gc, struct upboard_pinctrl, chip);
> +	int gpio = upboard_rpi_to_native_gpio(gc, offset);
> +	unsigned int pin = pctrl->rpi_mapping[offset];
> +	char name[strlen(pctrl->pctldesc->pins[pin].name)];
> +	char *p;

> +	if (gpio < 0)
> +		return;

When this can be true?
Same to the rest below.

> +	pinctrl_gpio_free(gpio);
> +
> +	strcpy(name, pctrl->pctldesc->pins[pin].name);
> +	p = name;
> +	upboard_alt_func_enable(gc, strsep(&p, "_"));
> +}

...

> +	/* APL03 open drain GPIO */
> +	if (pctrl->ident == 9) {
> +		if (pin == 0 || pin == 1) {
> +			int val = readl(pctrl->pins[pin].regs);
> +
> +			if (value)
> +				val |= PADCFG0_GPIOTXDIS;
> +			else
> +				val &= ~PADCFG0_GPIOTXDIS;
> +			writel(val, pctrl->pins[pin].regs);

Huh?!

If we need OD support in the pinctrl-intel, add it there.

> +		}

...

> +	if (strstr(dev_name(&pdev->dev), "INTC1055:00") ||
> +	    strstr(dev_name(&pdev->dev), "INT34C5:00")) {
> +		struct intel_pinctrl *intel_pctrl = gpiochip_get_data(gc);
> +		struct pinctrl_dev *pctldev;
> +		struct pinctrl_gpio_range *range;
> +
> +		pctldev = intel_pctrl->pctldev;
> +		if (pctldev == NULL)
> +			return NULL;
> +
> +		range = pinctrl_find_gpio_range_from_pin(pctldev, pin);
> +		if (range)
> +			pin = pin - range->pin_base;
> +		else
> +			return NULL;
> +
> +		if (range->pin_base < 67)
> +			res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +		else if (range->pin_base < 171)
> +			res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
> +		else if (range->pin_base < 260)
> +			res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
> +		else
> +			res = platform_get_resource(pdev, IORESOURCE_MEM, 3);
> +	}
> +
> +	if (IS_ERR(res)) {
> +		dev_err(gc->parent, "upboard resource get failed");
> +		return NULL;
> +	}

> +	base = devm_ioremap(&pdev->dev, res->start, resource_size(res));
> +	offset = readl(base + PADBAR);
> +	value = readl(base + REVID);
> +
> +	if (((value & REVID_MASK) >> REVID_SHIFT) >= 0x94)
> +		nregs = 4;
> +	else
> +		nregs = 2;
> +
> +	return base + offset + reg + pin * nregs * 4;
> +}

What the heck is this?!
Was it really in the version I have reviewed before?

...

> +static void upboard_irq_ack(struct irq_data *d)
> +{
> +	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
> +
> +	dev_info(NULL, "upboard_irq_ack");

Besides dev_info() and strange NULL, why do you need these messages? What for?
Same to the rest below.

> +}

...

> +	data->parent_data = irq_get_irq_data(pctrl->pins[offset].irq);
> +	if (data->parent_data) {
> +		dev_info(NULL, "%s: no NULL", __func__);

What?!

> +		return irq_chip_set_type_parent(data, type);
> +	}
> +
> +	dev_info(NULL, "%s: NULL", __func__);

Ditto.

...

> +static struct irq_chip upboard_gpio_irqchip = {
> +	.name = "upboard-gpio-irq",
> +	.irq_ack = upboard_irq_ack,
> +	.irq_mask = upboard_irq_mask,
> +	.irq_unmask = upboard_irq_unmask,
> +	.irq_set_type = upboard_irq_chip_set_type,
> +	.flags = IRQCHIP_MASK_ON_SUSPEND | IRQCHIP_SKIP_SET_WAKE,

It should be set IMMUTABLE.

> +};

...

> +	hid = acpi_device_hid(adev);
> +	if (!strcmp(hid, "AANT0F00") || !strcmp(hid, "AANT0F04") ||
> +	    !strcmp(hid, "AANT0000")) {

This is done via ACPI ID table (but without announcing it as module supported
hardware) and corresponding match functions.

> +		pctldesc = &upboard_up_pinctrl_desc;
> +		rpi_mapping = upboard_up_rpi_mapping;
> +		ngpio  = ARRAY_SIZE(upboard_up_rpi_mapping);
> +	} else if (!strcmp(hid, "AANT0F01")) {
> +		pctldesc = &upboard_up2_pinctrl_desc;
> +		rpi_mapping = upboard_up2_rpi_mapping;
> +		ngpio  = ARRAY_SIZE(upboard_up2_rpi_mapping);
> +	} else if (!strcmp(hid, "AANT0F02")) {
> +		pctldesc = &upboard_upcore_crex_pinctrl_desc;
> +		rpi_mapping = upboard_upcore_crex_rpi_mapping;
> +		ngpio  = ARRAY_SIZE(upboard_upcore_crex_rpi_mapping);
> +	} else if (!strcmp(hid, "AANT0F03")) {
> +		pctldesc = &upboard_upcore_crst02_pinctrl_desc;
> +		rpi_mapping = upboard_upcore_crst02_rpi_mapping;
> +		ngpio  = ARRAY_SIZE(upboard_upcore_crst02_rpi_mapping);
> +	} else
> +		return -ENODEV;

...

> +	pins = devm_kzalloc(&pdev->dev,
> +			    sizeof(*pins) * pctldesc->npins,
> +			    GFP_KERNEL);

devm_kcalloc() or even devm_kmalloc_array().

> +	if (!pins)
> +		return -ENOMEM;

...

I stopped here since I don't believe that I have given a tag to this earlier...
If it's the case, I don't know what I have got that day.
  
larry.lai April 25, 2023, 3:28 p.m. UTC | #2
Dear Andy, 
 
        Thank you for spending time to review this code before, we already fixed some of the issues, please kindly check the following comments with “>>>” beginning.
        Some of issues we will fix in new RFC_230425 patch, some may need you give us more examples or comments, thanks again !
 
Best Regards,
Larry Lai
 
寄件者: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
日期: 星期四, 2022年12月8日 上午5:32
收件者: Larry Lai <larry.lai@yunjingtech.com>
副本: lee@kernel.org <lee@kernel.org>, linus.walleij@linaro.org <linus.walleij@linaro.org>, pavel@ucw.cz <pavel@ucw.cz>, linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>, linux-gpio@vger.kernel.org <linux-gpio@vger.kernel.org>, linux-leds@vger.kernel.org <linux-leds@vger.kernel.org>, GaryWang@aaeon.com.tw <GaryWang@aaeon.com.tw>, Musa Lin <musa.lin@yunjingtech.com>, Jack Chang <jack.chang@yunjingtech.com>, Noah Hung <noah.hung@yunjingtech.com>
主旨: Re: [RFC 2/3] pinctrl: Add support pin control for UP board CPLD/FPGA
On Thu, Dec 08, 2022 at 12:33:58AM +0800, larry.lai wrote:
> The UP Squared board <http://www.upboard.com> implements certain
> features (pin control) through an on-board FPGA.

(I already reviewed previous version and you have my tag, but some new comments
 which may be already answered, sorry for the repetition in such cases).

Actually... based on the below comments I have to withdraw my tag.
This driver may not go into upstream in the current form.

I'm puzzled if it's indeed the code I have reviewed?

...

> +#include <linux/acpi.h>

This is actually not needed, but property.h.
See below how.
>>> This pinctrl driver read HID from (acpi_devices) mfd acpi driver, so will need to use some of acpi.h api.
...

> +static int upboard_fpga_request_enable(struct pinctrl_dev *pctldev,
> +                                    struct pinctrl_gpio_range *range,
> +                                    unsigned int pin)
> +{
> +     const struct pin_desc * const pd = pin_desc_get(pctldev, pin);
> +     const struct upboard_pin *p;
> +     int ret;

> +     if (!pd)
> +             return -EINVAL;

When this can be true?
Ditto for other functions with this conditional.
>>> Confirm this will not be true, so remove this code in new patch, please ignore it.
> +     p = pd->drv_data;
> +     if (p->funcbit) {
> +             ret = regmap_field_write(p->funcbit, 0);
> +             if (ret)
> +                     return ret;
> +     }
> +
> +     if (p->enbit) {
> +             ret = regmap_field_write(p->enbit, 1);
> +             if (ret)
> +                     return ret;
> +     }
> +
> +     return 0;
> +};

...

> +     struct upboard_pinctrl *pctrl = container_of(gc, struct upboard_pinctrl, chip);

Don't you set a private data of GPIO chip to point to your custom structure?
>>> We give the gpio chip data in the pinctrl probe function to distinguish the different board HID to instead use private data of GPIO chip. This can determine which board used in every function.

Either way, I would recommend to make gpio_chip a first member in your
upboard_pinctrl.
>>> fixed.
...

> +                     int mode = 1;

See below about default.

> +                     unsigned int val;
> +
> +                     switch (pctrl->ident) {
> +                     case 15:
> +                             mode = 2;
> +                     break;
> +                     }

Wrong indentation, missing default.
Same for the rest below.
>>> fixed.

> +             } else if (strstr(pctrl->pctldesc->pins[offset[i]].name,
> +                               "UART")) {

One line would be better to read, same for the rest below.
>>> fixed.
...

> +             /* input pins */
> +             if (strstr(pctrl->pctldesc->pins[offset[i]].name, "RX"))
> +                     input = true;
> +             if (strstr(pctrl->pctldesc->pins[offset[i]].name, "CTS"))
> +                     input = true;
> +             if (strstr(pctrl->pctldesc->pins[offset[i]].name, "ADC"))
> +                     input = true;
> +             if (strstr(pctrl->pctldesc->pins[offset[i]].name, "MISO"))
> +                     input = true;
> +             if (strstr(pctrl->pctldesc->pins[offset[i]].name, "DIN"))
> +                     input = true;

Can you have this in some static const data structure that is associated with
pin list?
>>> Due to the offsets of boards are different, so we need to scan all boards offset first, so we didn't use the static const data to be associated with.
...

> +static void upboard_gpio_free(struct gpio_chip *gc, unsigned int offset)
> +{
> +     struct upboard_pinctrl *pctrl = container_of(gc, struct upboard_pinctrl, chip);
> +     int gpio = upboard_rpi_to_native_gpio(gc, offset);
> +     unsigned int pin = pctrl->rpi_mapping[offset];
> +     char name[strlen(pctrl->pctldesc->pins[pin].name)];
> +     char *p;

> +     if (gpio < 0)
> +             return;

When this can be true?
Same to the rest below.
>>> Confirm this will not be true, so remove this code in new patch, please ignore it.
> +     pinctrl_gpio_free(gpio);
> +
> +     strcpy(name, pctrl->pctldesc->pins[pin].name);
> +     p = name;
> +     upboard_alt_func_enable(gc, strsep(&p, "_"));
> +}

...

> +     /* APL03 open drain GPIO */
> +     if (pctrl->ident == 9) {
> +             if (pin == 0 || pin == 1) {
> +                     int val = readl(pctrl->pins[pin].regs);
> +
> +                     if (value)
> +                             val |= PADCFG0_GPIOTXDIS;
> +                     else
> +                             val &= ~PADCFG0_GPIOTXDIS;
> +                     writel(val, pctrl->pins[pin].regs);

Huh?!

If we need OD support in the pinctrl-intel, add it there.
>>> Due to this is only for APL03 upboard pin0, pin1 open-drain and this board is already in the wild, so we should not add it to pinctrl-intel to affect others Intel board.
> +             }

...

> +     if (strstr(dev_name(&pdev->dev), "INTC1055:00") ||
> +         strstr(dev_name(&pdev->dev), "INT34C5:00")) {
> +             struct intel_pinctrl *intel_pctrl = gpiochip_get_data(gc);
> +             struct pinctrl_dev *pctldev;
> +             struct pinctrl_gpio_range *range;
> +
> +             pctldev = intel_pctrl->pctldev;
> +             if (pctldev == NULL)
> +                     return NULL;
> +
> +             range = pinctrl_find_gpio_range_from_pin(pctldev, pin);
> +             if (range)
> +                     pin = pin - range->pin_base;
> +             else
> +                     return NULL;
> +
> +             if (range->pin_base < 67)
> +                     res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +             else if (range->pin_base < 171)
> +                     res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
> +             else if (range->pin_base < 260)
> +                     res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
> +             else
> +                     res = platform_get_resource(pdev, IORESOURCE_MEM, 3);
> +     }
> +
> +     if (IS_ERR(res)) {
> +             dev_err(gc->parent, "upboard resource get failed");
> +             return NULL;
> +     }

> +     base = devm_ioremap(&pdev->dev, res->start, resource_size(res));
> +     offset = readl(base + PADBAR);
> +     value = readl(base + REVID);
> +
> +     if (((value & REVID_MASK) >> REVID_SHIFT) >= 0x94)
> +             nregs = 4;
> +     else
> +             nregs = 2;
> +
> +     return base + offset + reg + pin * nregs * 4;
> +}

What the heck is this?!
Was it really in the version I have reviewed before?
>>> This code is for supporting multi-function pin with runtime change. Do you have any suggestion?
...

> +static void upboard_irq_ack(struct irq_data *d)
> +{
> +     struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
> +
> +     dev_info(NULL, "upboard_irq_ack");

Besides dev_info() and strange NULL, why do you need these messages? What for?
Same to the rest below.
>>> This section has been removed in new RFC patch, please ignore it.
> +}

...

> +     data->parent_data = irq_get_irq_data(pctrl->pins[offset].irq);
> +     if (data->parent_data) {
> +             dev_info(NULL, "%s: no NULL", __func__);

What?!
>>> This section has been removed in new RFC patch, please ignore it.
> +             return irq_chip_set_type_parent(data, type);
> +     }
> +
> +     dev_info(NULL, "%s: NULL", __func__);

Ditto.
>>> This section has been removed in new RFC patch, please ignore it.
...

> +static struct irq_chip upboard_gpio_irqchip = {
> +     .name = "upboard-gpio-irq",
> +     .irq_ack = upboard_irq_ack,
> +     .irq_mask = upboard_irq_mask,
> +     .irq_unmask = upboard_irq_unmask,
> +     .irq_set_type = upboard_irq_chip_set_type,
> +     .flags = IRQCHIP_MASK_ON_SUSPEND | IRQCHIP_SKIP_SET_WAKE,

It should be set IMMUTABLE.
>>> This section has been removed in new RFC patch, please ignore it.
> +};

...

> +     hid = acpi_device_hid(adev);
> +     if (!strcmp(hid, "AANT0F00") || !strcmp(hid, "AANT0F04") ||
> +         !strcmp(hid, "AANT0000")) {

This is done via ACPI ID table (but without announcing it as module supported
hardware) and corresponding match functions.
>>> This is for assigning driver data so we need to know HID.

> +             pctldesc = &upboard_up_pinctrl_desc;
> +             rpi_mapping = upboard_up_rpi_mapping;
> +             ngpio  = ARRAY_SIZE(upboard_up_rpi_mapping);
> +     } else if (!strcmp(hid, "AANT0F01")) {
> +             pctldesc = &upboard_up2_pinctrl_desc;
> +             rpi_mapping = upboard_up2_rpi_mapping;
> +             ngpio  = ARRAY_SIZE(upboard_up2_rpi_mapping);
> +     } else if (!strcmp(hid, "AANT0F02")) {
> +             pctldesc = &upboard_upcore_crex_pinctrl_desc;
> +             rpi_mapping = upboard_upcore_crex_rpi_mapping;
> +             ngpio  = ARRAY_SIZE(upboard_upcore_crex_rpi_mapping);
> +     } else if (!strcmp(hid, "AANT0F03")) {
> +             pctldesc = &upboard_upcore_crst02_pinctrl_desc;
> +             rpi_mapping = upboard_upcore_crst02_rpi_mapping;
> +             ngpio  = ARRAY_SIZE(upboard_upcore_crst02_rpi_mapping);
> +     } else
> +             return -ENODEV;

...

> +     pins = devm_kzalloc(&pdev->dev,
> +                         sizeof(*pins) * pctldesc->npins,
> +                         GFP_KERNEL);

devm_kcalloc() or even devm_kmalloc_array().
>>> fixed.
> +     if (!pins)
> +             return -ENOMEM;

...

I stopped here since I don't believe that I have given a tag to this earlier...
If it's the case, I don't know what I have got that day.
  

Patch

diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index 1cf74b0c42e5..cc8dae75289b 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -483,6 +483,20 @@  config PINCTRL_THUNDERBAY
 	  rate control and direction control. This module will be
 	  called as pinctrl-thunderbay.
 
+config PINCTRL_UPBOARD
+	tristate "UP board FPGA pin controller"
+	depends on (X86 && ACPI) || COMPILE_TEST
+	depends on MFD_INTEL_UPBOARD_FPGA
+	select GENERIC_PINCONF
+	select PINMUX
+	select PINCONF
+	help
+	  Pin controller for the FPGA GPIO lines on UP boards. Due to the
+	  hardware layout, these are meant to be controlled in tandem with their
+	  corresponding Intel SoC GPIOs.
+	  To compile this driver as a module, choose M here: the module
+	  will be called pinctrl-upboard.
+
 config PINCTRL_ZYNQ
 	bool "Pinctrl driver for Xilinx Zynq"
 	depends on ARCH_ZYNQ
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index e76f5cdc64b0..c366706d36e7 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -48,6 +48,7 @@  obj-$(CONFIG_PINCTRL_STMFX) 	+= pinctrl-stmfx.o
 obj-$(CONFIG_PINCTRL_SX150X)	+= pinctrl-sx150x.o
 obj-$(CONFIG_PINCTRL_TB10X)	+= pinctrl-tb10x.o
 obj-$(CONFIG_PINCTRL_THUNDERBAY) += pinctrl-thunderbay.o
+obj-$(CONFIG_PINCTRL_UPBOARD)	+= pinctrl-upboard.o
 obj-$(CONFIG_PINCTRL_ZYNQMP)	+= pinctrl-zynqmp.o
 obj-$(CONFIG_PINCTRL_ZYNQ)	+= pinctrl-zynq.o
 
diff --git a/drivers/pinctrl/pinctrl-upboard.c b/drivers/pinctrl/pinctrl-upboard.c
new file mode 100644
index 000000000000..e06151f4c128
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-upboard.c
@@ -0,0 +1,1384 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * UP Board FPGA-based pin controller driver
+ *
+ * Copyright (c) 2017, Emutex Ltd. All rights reserved.
+ * Copyright (c) 2022, YunJingTech Ltd.
+ *
+ * Authors: Javier Arteaga <javier@emutex.com>
+ *          Dan O'Donovan <dan@emutex.com>
+ *          Nicola Lunghi <nicolal@emutex.com>
+ *          Gary Wang <garywang@aaeon.com.tw>
+ */
+
+#include <linux/acpi.h>
+#include <linux/dmi.h>
+#include <linux/gpio/consumer.h>
+#include <linux/gpio/driver.h>
+#include <linux/kernel.h>
+#include <linux/mfd/upboard-fpga.h>
+#include <linux/module.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/interrupt.h>
+#include <linux/string.h>
+
+#include "core.h"
+
+/* Offset from regs */
+#define REVID				0x000
+#define REVID_SHIFT			16
+#define REVID_MASK			GENMASK(31, 16)
+
+#define CAPLIST				0x004
+#define CAPLIST_ID_SHIFT		16
+#define CAPLIST_ID_MASK			GENMASK(23, 16)
+#define CAPLIST_ID_GPIO_HW_INFO		1
+#define CAPLIST_ID_PWM			2
+#define CAPLIST_ID_BLINK		3
+#define CAPLIST_ID_EXP			4
+#define CAPLIST_NEXT_SHIFT		0
+#define CAPLIST_NEXT_MASK		GENMASK(15, 0)
+
+#define PADBAR				0x00c
+
+#define PADOWN_BITS			4
+#define PADOWN_SHIFT(p)			((p) % 8 * PADOWN_BITS)
+#define PADOWN_MASK(p)			(GENMASK(3, 0) << PADOWN_SHIFT(p))
+#define PADOWN_GPP(p)			((p) / 8)
+
+/* Offset from pad_regs */
+#define PADCFG0				0x000
+#define PADCFG0_RXEVCFG_SHIFT		25
+#define PADCFG0_RXEVCFG_MASK		GENMASK(26, 25)
+#define PADCFG0_RXEVCFG_LEVEL		0
+#define PADCFG0_RXEVCFG_EDGE		1
+#define PADCFG0_RXEVCFG_DISABLED	2
+#define PADCFG0_RXEVCFG_EDGE_BOTH	3
+#define PADCFG0_PREGFRXSEL		BIT(24)
+#define PADCFG0_RXINV			BIT(23)
+#define PADCFG0_GPIROUTIOXAPIC		BIT(20)
+#define PADCFG0_GPIROUTSCI		BIT(19)
+#define PADCFG0_GPIROUTSMI		BIT(18)
+#define PADCFG0_GPIROUTNMI		BIT(17)
+#define PADCFG0_PMODE_SHIFT		10
+#define PADCFG0_PMODE_MASK		GENMASK(13, 10)
+#define PADCFG0_PMODE_GPIO		0
+#define PADCFG0_GPIORXDIS		BIT(9)
+#define PADCFG0_GPIOTXDIS		BIT(8)
+#define PADCFG0_GPIORXSTATE		BIT(1)
+#define PADCFG0_GPIOTXSTATE		BIT(0)
+
+#define PADCFG1				0x004
+#define PADCFG1_TERM_UP			BIT(13)
+#define PADCFG1_TERM_SHIFT		10
+#define PADCFG1_TERM_MASK		GENMASK(12, 10)
+#define PADCFG1_TERM_20K		BIT(2)
+#define PADCFG1_TERM_5K			BIT(1)
+#define PADCFG1_TERM_1K			BIT(0)
+#define PADCFG1_TERM_833		(BIT(1) | BIT(0))
+
+#define PADCFG2				0x008
+#define PADCFG2_DEBEN			BIT(0)
+#define PADCFG2_DEBOUNCE_SHIFT		1
+#define PADCFG2_DEBOUNCE_MASK		GENMASK(4, 1)
+
+#define DEBOUNCE_PERIOD_NSEC		31250
+
+/* Additional features supported by the hardware */
+#define PINCTRL_FEATURE_DEBOUNCE	BIT(0)
+#define PINCTRL_FEATURE_1K_PD		BIT(1)
+
+#define pin_to_padno(c, p)	((p) - (c)->pin_base)
+#define padgroup_offset(g, p)	((p) - (g)->base)
+
+struct intel_pinctrl {
+	struct device *dev;
+	raw_spinlock_t lock;
+	struct pinctrl_desc pctldesc;
+	struct pinctrl_dev *pctldev;
+	struct gpio_chip chip;
+	struct irq_chip irqchip;
+	void *soc;
+	void *communities;
+	size_t ncommunities;
+};
+
+struct upboard_pin {
+	struct regmap_field *funcbit;
+	struct regmap_field *enbit;
+	struct regmap_field *dirbit;
+	/* native pin controllers: number, base, irq */
+	unsigned int gpio;
+	unsigned int base;
+	int irq;
+	void __iomem *regs;
+};
+
+struct upboard_pinctrl {
+	struct gpio_chip chip;
+	struct device *dev;
+	struct pinctrl_dev *pctldev;
+	struct pinctrl_desc *pctldesc;
+	struct upboard_pin *pins;
+	struct regmap *regmap;
+	const unsigned int *rpi_mapping;
+	int ident;
+};
+
+enum upboard_func0_fpgabit {
+	UPFPGA_I2C0_EN = 8,
+	UPFPGA_I2C1_EN = 9,
+	UPFPGA_CEC0_EN = 12,
+	UPFPGA_ADC0_EN = 14,
+};
+
+static const struct reg_field upboard_i2c0_reg =
+	REG_FIELD(UPFPGA_REG_FUNC_EN0, UPFPGA_I2C0_EN, UPFPGA_I2C0_EN);
+
+static const struct reg_field upboard_i2c1_reg =
+	REG_FIELD(UPFPGA_REG_FUNC_EN0, UPFPGA_I2C1_EN, UPFPGA_I2C1_EN);
+
+static const struct reg_field upboard_adc0_reg =
+	REG_FIELD(UPFPGA_REG_FUNC_EN0, UPFPGA_ADC0_EN, UPFPGA_ADC0_EN);
+
+/* Pin group information */
+struct upboard_pingroup {
+	const char *name;
+	const unsigned int *pins;
+	size_t npins;
+};
+
+/* Pin function information */
+struct upboard_function {
+	const char *name;
+	const char * const *groups;
+	size_t ngroups;
+};
+
+#define UPBOARD_BIT_TO_PIN(r, bit) \
+	((r) * UPFPGA_REGISTER_SIZE + (bit))
+
+/*
+ * UP board data
+ */
+
+#define UPBOARD_UP_BIT_TO_PIN(r, id) (UPBOARD_BIT_TO_PIN(r, UPFPGA_UP_##id))
+
+#define UPBOARD_UP_PIN_ANON(r, bit)					\
+	{								\
+		.number = UPBOARD_BIT_TO_PIN(r, bit),			\
+	}
+
+#define UPBOARD_UP_PIN_NAME(r, id)					\
+	{								\
+		.number = UPBOARD_UP_BIT_TO_PIN(r, id),			\
+		.name = #id,						\
+	}
+
+#define UPBOARD_UP_PIN_FUNC(r, id, data)				\
+	{								\
+		.number = UPBOARD_UP_BIT_TO_PIN(r, id),			\
+		.name = #id,						\
+		.drv_data = (void *)(data),				\
+	}
+
+#define PIN_GROUP(n, p)				\
+	{					\
+		.name = (n),			\
+		.pins = (p),			\
+		.npins = ARRAY_SIZE((p)),	\
+	}
+
+#define FUNCTION(n, g)				\
+	{					\
+		.name = (n),			\
+		.groups = (g),			\
+		.ngroups = ARRAY_SIZE((g)),	\
+	}
+
+enum upboard_up_reg1_fpgabit {
+	UPFPGA_UP_I2C1_SDA,
+	UPFPGA_UP_I2C1_SCL,
+	UPFPGA_UP_ADC0,
+	UPFPGA_UP_GPIO17,
+	UPFPGA_UP_GPIO27,
+	UPFPGA_UP_GPIO22,
+	UPFPGA_UP_SPI_MOSI,
+	UPFPGA_UP_SPI_MISO,
+	UPFPGA_UP_SPI_CLK,
+	UPFPGA_UP_I2C0_SDA,
+	UPFPGA_UP_GPIO5,
+	UPFPGA_UP_GPIO6,
+	UPFPGA_UP_PWM1,
+	UPFPGA_UP_I2S_FRM,
+	UPFPGA_UP_GPIO26,
+	UPFPGA_UP_UART1_TX,
+};
+
+enum upboard_up_reg2_fpgabit {
+	UPFPGA_UP_UART1_RX,
+	UPFPGA_UP_I2S_CLK,
+	UPFPGA_UP_GPIO23,
+	UPFPGA_UP_GPIO24,
+	UPFPGA_UP_GPIO25,
+	UPFPGA_UP_SPI_CS0,
+	UPFPGA_UP_SPI_CS1,
+	UPFPGA_UP_I2C0_SCL,
+	UPFPGA_UP_PWM0,
+	UPFPGA_UP_GPIO16,
+	UPFPGA_UP_I2S_DIN,
+	UPFPGA_UP_I2S_DOUT,
+};
+
+#define UPFPGA_UP_UART1_RTS UPFPGA_UP_GPIO17
+#define UPFPGA_UP_UART1_CTS UPFPGA_UP_GPIO16
+
+static struct pinctrl_pin_desc upboard_up_pins[] = {
+	UPBOARD_UP_PIN_FUNC(0, I2C1_SDA, &upboard_i2c1_reg),
+	UPBOARD_UP_PIN_FUNC(0, I2C1_SCL, &upboard_i2c1_reg),
+	UPBOARD_UP_PIN_FUNC(0, ADC0, &upboard_adc0_reg),
+	UPBOARD_UP_PIN_NAME(0, UART1_RTS),
+	UPBOARD_UP_PIN_NAME(0, GPIO27),
+	UPBOARD_UP_PIN_NAME(0, GPIO22),
+	UPBOARD_UP_PIN_NAME(0, SPI_MOSI),
+	UPBOARD_UP_PIN_NAME(0, SPI_MISO),
+	UPBOARD_UP_PIN_NAME(0, SPI_CLK),
+	UPBOARD_UP_PIN_FUNC(0, I2C0_SDA, &upboard_i2c0_reg),
+	UPBOARD_UP_PIN_NAME(0, GPIO5),
+	UPBOARD_UP_PIN_NAME(0, GPIO6),
+	UPBOARD_UP_PIN_NAME(0, PWM1),
+	UPBOARD_UP_PIN_NAME(0, I2S_FRM),
+	UPBOARD_UP_PIN_NAME(0, GPIO26),
+	UPBOARD_UP_PIN_NAME(0, UART1_TX),
+	/* register 1 */
+	UPBOARD_UP_PIN_NAME(1, UART1_RX),
+	UPBOARD_UP_PIN_NAME(1, I2S_CLK),
+	UPBOARD_UP_PIN_NAME(1, GPIO23),
+	UPBOARD_UP_PIN_NAME(1, GPIO24),
+	UPBOARD_UP_PIN_NAME(1, GPIO25),
+	UPBOARD_UP_PIN_NAME(1, SPI_CS0),
+	UPBOARD_UP_PIN_NAME(1, SPI_CS1),
+	UPBOARD_UP_PIN_FUNC(1, I2C0_SCL, &upboard_i2c0_reg),
+	UPBOARD_UP_PIN_NAME(1, PWM0),
+	UPBOARD_UP_PIN_NAME(1, UART1_CTS),
+	UPBOARD_UP_PIN_NAME(1, I2S_DIN),
+	UPBOARD_UP_PIN_NAME(1, I2S_DOUT),
+};
+
+static const unsigned int upboard_up_rpi_mapping[] = {
+	UPBOARD_UP_BIT_TO_PIN(0, I2C0_SDA),
+	UPBOARD_UP_BIT_TO_PIN(1, I2C0_SCL),
+	UPBOARD_UP_BIT_TO_PIN(0, I2C1_SDA),
+	UPBOARD_UP_BIT_TO_PIN(0, I2C1_SCL),
+	UPBOARD_UP_BIT_TO_PIN(0, ADC0),
+	UPBOARD_UP_BIT_TO_PIN(0, GPIO5),
+	UPBOARD_UP_BIT_TO_PIN(0, GPIO6),
+	UPBOARD_UP_BIT_TO_PIN(1, SPI_CS1),
+	UPBOARD_UP_BIT_TO_PIN(1, SPI_CS0),
+	UPBOARD_UP_BIT_TO_PIN(0, SPI_MISO),
+	UPBOARD_UP_BIT_TO_PIN(0, SPI_MOSI),
+	UPBOARD_UP_BIT_TO_PIN(0, SPI_CLK),
+	UPBOARD_UP_BIT_TO_PIN(1, PWM0),
+	UPBOARD_UP_BIT_TO_PIN(0, PWM1),
+	UPBOARD_UP_BIT_TO_PIN(0, UART1_TX),
+	UPBOARD_UP_BIT_TO_PIN(1, UART1_RX),
+	UPBOARD_UP_BIT_TO_PIN(1, GPIO16),
+	UPBOARD_UP_BIT_TO_PIN(0, GPIO17),
+	UPBOARD_UP_BIT_TO_PIN(1, I2S_CLK),
+	UPBOARD_UP_BIT_TO_PIN(0, I2S_FRM),
+	UPBOARD_UP_BIT_TO_PIN(1, I2S_DIN),
+	UPBOARD_UP_BIT_TO_PIN(1, I2S_DOUT),
+	UPBOARD_UP_BIT_TO_PIN(0, GPIO22),
+	UPBOARD_UP_BIT_TO_PIN(1, GPIO23),
+	UPBOARD_UP_BIT_TO_PIN(1, GPIO24),
+	UPBOARD_UP_BIT_TO_PIN(1, GPIO25),
+	UPBOARD_UP_BIT_TO_PIN(0, GPIO26),
+	UPBOARD_UP_BIT_TO_PIN(0, GPIO27),
+};
+
+static const unsigned int uart1_pins[] = { 14, 15, 16, 17 };
+static const unsigned int uart2_pins[] = { 25, 27 };
+static const unsigned int i2c0_pins[]  = { 0, 1 };
+static const unsigned int i2c1_pins[]  = { 2, 3 };
+static const unsigned int spi2_pins[]  = { 8, 9, 10, 11 };
+static const unsigned int i2s0_pins[]  = { 18, 19, 20, 21 };
+static const unsigned int pwm0_pins[]  = { 12 };
+static const unsigned int pwm1_pins[]  = { 13 };
+static const unsigned int adc0_pins[]  = { 4 };
+
+static const struct upboard_pingroup pin_groups[] = {
+	PIN_GROUP("uart1_grp", uart1_pins),
+	PIN_GROUP("uart2_grp", uart2_pins),
+	PIN_GROUP("i2c0_grp", i2c0_pins),
+	PIN_GROUP("i2c1_grp", i2c1_pins),
+	PIN_GROUP("spi2_grp", spi2_pins),
+	PIN_GROUP("i2s0_grp", i2s0_pins),
+	PIN_GROUP("pwm0_grp", pwm0_pins),
+	PIN_GROUP("pwm1_grp", pwm1_pins),
+	PIN_GROUP("adc0_grp", adc0_pins),
+};
+
+static const char * const uart1_groups[] = { "uart1_grp" };
+static const char * const uart2_groups[] = { "uart2_grp" };
+static const char * const i2c0_groups[]  = { "i2c0_grp" };
+static const char * const i2c1_groups[]  = { "i2c1_grp" };
+static const char * const spi2_groups[]  = { "spi2_grp" };
+static const char * const i2s0_groups[]  = { "i2s0_grp" };
+static const char * const pwm0_groups[]  = { "pwm0_grp" };
+static const char * const pwm1_groups[]  = { "pwm1_grp" };
+static const char * const adc0_groups[]  = { "adc0_grp" };
+
+static const struct upboard_function pin_functions[] = {
+	FUNCTION("uart1", uart1_groups),
+	FUNCTION("uart2", uart2_groups),
+	FUNCTION("i2c0",  i2c0_groups),
+	FUNCTION("i2c1",  i2c1_groups),
+	FUNCTION("spi2",  spi2_groups),
+	FUNCTION("i2s0",  i2s0_groups),
+	FUNCTION("pwm0",  pwm0_groups),
+	FUNCTION("pwm1",  pwm1_groups),
+	FUNCTION("adc0",  adc0_groups),
+};
+
+/*
+ * UP^2 board data
+ */
+
+#define UPBOARD_UP2_BIT_TO_PIN(r, id) (UPBOARD_BIT_TO_PIN(r, UPFPGA_UP2_##id))
+
+#define UPBOARD_UP2_PIN_ANON(r, bit)					\
+	{								\
+		.number = UPBOARD_BIT_TO_PIN(r, bit),			\
+		.name = "NONAME",					\
+	}
+
+#define UPBOARD_UP2_PIN_NAME(r, id)					\
+	{								\
+		.number = UPBOARD_UP2_BIT_TO_PIN(r, id),		\
+		.name = #id,						\
+	}
+
+#define UPBOARD_UP2_PIN_FUNC(r, id, data)				\
+	{								\
+		.number = UPBOARD_UP2_BIT_TO_PIN(r, id),		\
+		.name = #id,						\
+		.drv_data = (void *)(data),				\
+	}
+
+enum upboard_up2_reg0_fpgabit {
+	UPFPGA_UP2_UART1_TXD,
+	UPFPGA_UP2_UART1_RXD,
+	UPFPGA_UP2_UART1_RTS,
+	UPFPGA_UP2_UART1_CTS,
+	UPFPGA_UP2_GPIO3,
+	UPFPGA_UP2_GPIO5,
+	UPFPGA_UP2_GPIO6,
+	UPFPGA_UP2_GPIO11,
+	UPFPGA_UP2_EXHAT_LVDS1n,
+	UPFPGA_UP2_EXHAT_LVDS1p,
+	UPFPGA_UP2_SPI2_TXD,
+	UPFPGA_UP2_SPI2_RXD,
+	UPFPGA_UP2_SPI2_FS1,
+	UPFPGA_UP2_SPI2_FS0,
+	UPFPGA_UP2_SPI2_CLK,
+	UPFPGA_UP2_SPI1_TXD,
+};
+
+enum upboard_up2_reg1_fpgabit {
+	UPFPGA_UP2_SPI1_RXD,
+	UPFPGA_UP2_SPI1_FS1,
+	UPFPGA_UP2_SPI1_FS0,
+	UPFPGA_UP2_SPI1_CLK,
+	UPFPGA_UP2_BIT20,
+	UPFPGA_UP2_BIT21,
+	UPFPGA_UP2_BIT22,
+	UPFPGA_UP2_BIT23,
+	UPFPGA_UP2_PWM1,
+	UPFPGA_UP2_PWM0,
+	UPFPGA_UP2_EXHAT_LVDS0n,
+	UPFPGA_UP2_EXHAT_LVDS0p,
+	UPFPGA_UP2_I2C0_SCL,
+	UPFPGA_UP2_I2C0_SDA,
+	UPFPGA_UP2_I2C1_SCL,
+	UPFPGA_UP2_I2C1_SDA,
+};
+
+enum upboard_up2_reg2_fpgabit {
+	UPFPGA_UP2_EXHAT_LVDS3n,
+	UPFPGA_UP2_EXHAT_LVDS3p,
+	UPFPGA_UP2_EXHAT_LVDS4n,
+	UPFPGA_UP2_EXHAT_LVDS4p,
+	UPFPGA_UP2_EXHAT_LVDS5n,
+	UPFPGA_UP2_EXHAT_LVDS5p,
+	UPFPGA_UP2_I2S_SDO,
+	UPFPGA_UP2_I2S_SDI,
+	UPFPGA_UP2_I2S_WS_SYNC,
+	UPFPGA_UP2_I2S_BCLK,
+	UPFPGA_UP2_EXHAT_LVDS6n,
+	UPFPGA_UP2_EXHAT_LVDS6p,
+	UPFPGA_UP2_EXHAT_LVDS7n,
+	UPFPGA_UP2_EXHAT_LVDS7p,
+	UPFPGA_UP2_EXHAT_LVDS2n,
+	UPFPGA_UP2_EXHAT_LVDS2p,
+};
+
+static struct pinctrl_pin_desc upboard_up2_pins[] = {
+	UPBOARD_UP2_PIN_NAME(0, UART1_TXD),
+	UPBOARD_UP2_PIN_NAME(0, UART1_RXD),
+	UPBOARD_UP2_PIN_NAME(0, UART1_RTS),
+	UPBOARD_UP2_PIN_NAME(0, UART1_CTS),
+	UPBOARD_UP2_PIN_NAME(0, GPIO3),
+	UPBOARD_UP2_PIN_NAME(0, GPIO5),
+	UPBOARD_UP2_PIN_NAME(0, GPIO6),
+	UPBOARD_UP2_PIN_NAME(0, GPIO11),
+	UPBOARD_UP2_PIN_NAME(0, EXHAT_LVDS1n),
+	UPBOARD_UP2_PIN_NAME(0, EXHAT_LVDS1p),
+	UPBOARD_UP2_PIN_NAME(0, SPI2_TXD),
+	UPBOARD_UP2_PIN_NAME(0, SPI2_RXD),
+	UPBOARD_UP2_PIN_NAME(0, SPI2_FS1),
+	UPBOARD_UP2_PIN_NAME(0, SPI2_FS0),
+	UPBOARD_UP2_PIN_NAME(0, SPI2_CLK),
+	UPBOARD_UP2_PIN_NAME(0, SPI1_TXD),
+	UPBOARD_UP2_PIN_NAME(1, SPI1_RXD),
+	UPBOARD_UP2_PIN_NAME(1, SPI1_FS1),
+	UPBOARD_UP2_PIN_NAME(1, SPI1_FS0),
+	UPBOARD_UP2_PIN_NAME(1, SPI1_CLK),
+	UPBOARD_UP2_PIN_ANON(1, 4),
+	UPBOARD_UP2_PIN_ANON(1, 5),
+	UPBOARD_UP2_PIN_ANON(1, 6),
+	UPBOARD_UP2_PIN_ANON(1, 7),
+	UPBOARD_UP2_PIN_NAME(1, PWM1),
+	UPBOARD_UP2_PIN_NAME(1, PWM0),
+	UPBOARD_UP2_PIN_NAME(1, EXHAT_LVDS0n),
+	UPBOARD_UP2_PIN_NAME(1, EXHAT_LVDS0p),
+	UPBOARD_UP2_PIN_FUNC(1, I2C0_SCL, &upboard_i2c0_reg),
+	UPBOARD_UP2_PIN_FUNC(1, I2C0_SDA, &upboard_i2c0_reg),
+	UPBOARD_UP2_PIN_FUNC(1, I2C1_SCL, &upboard_i2c1_reg),
+	UPBOARD_UP2_PIN_FUNC(1, I2C1_SDA, &upboard_i2c1_reg),
+	UPBOARD_UP2_PIN_NAME(2, EXHAT_LVDS3n),
+	UPBOARD_UP2_PIN_NAME(2, EXHAT_LVDS3p),
+	UPBOARD_UP2_PIN_NAME(2, EXHAT_LVDS4n),
+	UPBOARD_UP2_PIN_NAME(2, EXHAT_LVDS4p),
+	UPBOARD_UP2_PIN_NAME(2, EXHAT_LVDS5n),
+	UPBOARD_UP2_PIN_NAME(2, EXHAT_LVDS5p),
+	UPBOARD_UP2_PIN_NAME(2, I2S_SDO),
+	UPBOARD_UP2_PIN_NAME(2, I2S_SDI),
+	UPBOARD_UP2_PIN_NAME(2, I2S_WS_SYNC),
+	UPBOARD_UP2_PIN_NAME(2, I2S_BCLK),
+	UPBOARD_UP2_PIN_NAME(2, EXHAT_LVDS6n),
+	UPBOARD_UP2_PIN_NAME(2, EXHAT_LVDS6p),
+	UPBOARD_UP2_PIN_NAME(2, EXHAT_LVDS7n),
+	UPBOARD_UP2_PIN_NAME(2, EXHAT_LVDS7p),
+	UPBOARD_UP2_PIN_NAME(2, EXHAT_LVDS2n),
+	UPBOARD_UP2_PIN_NAME(2, EXHAT_LVDS2p),
+};
+
+static const unsigned int upboard_up2_rpi_mapping[] = {
+	UPBOARD_UP2_BIT_TO_PIN(1, I2C0_SDA),
+	UPBOARD_UP2_BIT_TO_PIN(1, I2C0_SCL),
+	UPBOARD_UP2_BIT_TO_PIN(1, I2C1_SDA),
+	UPBOARD_UP2_BIT_TO_PIN(1, I2C1_SCL),
+	UPBOARD_UP2_BIT_TO_PIN(0, GPIO3),
+	UPBOARD_UP2_BIT_TO_PIN(0, GPIO11),
+	UPBOARD_UP2_BIT_TO_PIN(0, SPI2_CLK),
+	UPBOARD_UP2_BIT_TO_PIN(1, SPI1_FS1),
+	UPBOARD_UP2_BIT_TO_PIN(1, SPI1_FS0),
+	UPBOARD_UP2_BIT_TO_PIN(1, SPI1_RXD),
+	UPBOARD_UP2_BIT_TO_PIN(0, SPI1_TXD),
+	UPBOARD_UP2_BIT_TO_PIN(1, SPI1_CLK),
+	UPBOARD_UP2_BIT_TO_PIN(1, PWM0),
+	UPBOARD_UP2_BIT_TO_PIN(1, PWM1),
+	UPBOARD_UP2_BIT_TO_PIN(0, UART1_TXD),
+	UPBOARD_UP2_BIT_TO_PIN(0, UART1_RXD),
+	UPBOARD_UP2_BIT_TO_PIN(0, UART1_CTS),
+	UPBOARD_UP2_BIT_TO_PIN(0, UART1_RTS),
+	UPBOARD_UP2_BIT_TO_PIN(2, I2S_BCLK),
+	UPBOARD_UP2_BIT_TO_PIN(2, I2S_WS_SYNC),
+	UPBOARD_UP2_BIT_TO_PIN(2, I2S_SDI),
+	UPBOARD_UP2_BIT_TO_PIN(2, I2S_SDO),
+	UPBOARD_UP2_BIT_TO_PIN(0, GPIO6),
+	UPBOARD_UP2_BIT_TO_PIN(0, SPI2_FS1),
+	UPBOARD_UP2_BIT_TO_PIN(0, SPI2_RXD),
+	UPBOARD_UP2_BIT_TO_PIN(0, SPI2_TXD),
+	UPBOARD_UP2_BIT_TO_PIN(0, SPI2_FS0),
+	UPBOARD_UP2_BIT_TO_PIN(0, GPIO5),
+};
+
+/*
+ * UP Core board + CREX carrier board data
+ */
+
+#define UPBOARD_UPCORE_CREX_BIT_TO_PIN(r, id)				\
+	(UPBOARD_BIT_TO_PIN(r, UPFPGA_UPCORE_CREX_##id))
+
+#define UPBOARD_UPCORE_CREX_PIN_ANON(r, bit)				\
+	{								\
+		.number = UPBOARD_BIT_TO_PIN(r, bit),			\
+	}
+
+#define UPBOARD_UPCORE_CREX_PIN_NAME(r, id)				\
+	{								\
+		.number = UPBOARD_UPCORE_CREX_BIT_TO_PIN(r, id),	\
+		.name = #id,						\
+	}
+
+#define UPBOARD_UPCORE_CREX_PIN_FUNC(r, id, data)			\
+	{								\
+		.number = UPBOARD_UPCORE_CREX_BIT_TO_PIN(r, id),	\
+		.name = #id,						\
+		.drv_data = (void *)(data),				\
+	}
+
+enum upboard_upcore_crex_reg1_fpgabit {
+	UPFPGA_UPCORE_CREX_I2C0_SDA,
+	UPFPGA_UPCORE_CREX_I2C0_SCL,
+	UPFPGA_UPCORE_CREX_I2C1_SDA,
+	UPFPGA_UPCORE_CREX_I2C1_SCL,
+	UPFPGA_UPCORE_CREX_SPI2_CS0,
+	UPFPGA_UPCORE_CREX_SPI2_CS1,
+	UPFPGA_UPCORE_CREX_SPI2_MOSI,
+	UPFPGA_UPCORE_CREX_SPI2_MISO,
+	UPFPGA_UPCORE_CREX_SPI2_CLK,
+	UPFPGA_UPCORE_CREX_UART1_TXD,
+	UPFPGA_UPCORE_CREX_UART1_RXD,
+	UPFPGA_UPCORE_CREX_PWM0,
+	UPFPGA_UPCORE_CREX_PWM1,
+	UPFPGA_UPCORE_CREX_I2S2_FRM,
+	UPFPGA_UPCORE_CREX_I2S2_CLK,
+	UPFPGA_UPCORE_CREX_I2S2_RX,
+};
+
+enum upboard_upcore_crex_reg2_fpgabit {
+	UPFPGA_UPCORE_CREX_I2S2_TX,
+	UPFPGA_UPCORE_CREX_GPIO0,
+	UPFPGA_UPCORE_CREX_GPIO2,
+	UPFPGA_UPCORE_CREX_GPIO3,
+	UPFPGA_UPCORE_CREX_GPIO4,
+	UPFPGA_UPCORE_CREX_GPIO9,
+};
+
+static struct pinctrl_pin_desc upboard_upcore_crex_pins[] = {
+	UPBOARD_UPCORE_CREX_PIN_FUNC(0, I2C0_SDA, &upboard_i2c0_reg),
+	UPBOARD_UPCORE_CREX_PIN_FUNC(0, I2C0_SCL, &upboard_i2c0_reg),
+	UPBOARD_UPCORE_CREX_PIN_FUNC(0, I2C1_SDA, &upboard_i2c1_reg),
+	UPBOARD_UPCORE_CREX_PIN_FUNC(0, I2C1_SCL, &upboard_i2c1_reg),
+	UPBOARD_UPCORE_CREX_PIN_NAME(0, SPI2_CS0),
+	UPBOARD_UPCORE_CREX_PIN_NAME(0, SPI2_CS1),
+	UPBOARD_UPCORE_CREX_PIN_NAME(0, SPI2_MOSI),
+	UPBOARD_UPCORE_CREX_PIN_NAME(0, SPI2_MISO),
+	UPBOARD_UPCORE_CREX_PIN_NAME(0, SPI2_CLK),
+	UPBOARD_UPCORE_CREX_PIN_NAME(0, UART1_TXD),
+	UPBOARD_UPCORE_CREX_PIN_NAME(0, UART1_RXD),
+	UPBOARD_UPCORE_CREX_PIN_NAME(0, PWM0),
+	UPBOARD_UPCORE_CREX_PIN_NAME(0, PWM1),
+	UPBOARD_UPCORE_CREX_PIN_NAME(0, I2S2_FRM),
+	UPBOARD_UPCORE_CREX_PIN_NAME(0, I2S2_CLK),
+	UPBOARD_UPCORE_CREX_PIN_NAME(0, I2S2_RX),
+	/* register 1 */
+	UPBOARD_UPCORE_CREX_PIN_NAME(1, I2S2_TX),
+	UPBOARD_UPCORE_CREX_PIN_NAME(1, GPIO0),
+	UPBOARD_UPCORE_CREX_PIN_FUNC(1, GPIO2, &upboard_adc0_reg),
+	UPBOARD_UPCORE_CREX_PIN_NAME(1, GPIO3),
+	UPBOARD_UPCORE_CREX_PIN_NAME(1, GPIO4),
+	UPBOARD_UPCORE_CREX_PIN_NAME(1, GPIO9),
+};
+
+static unsigned int upboard_upcore_crex_rpi_mapping[] = {
+	UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, I2C0_SDA),
+	UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, I2C0_SCL),
+	UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, I2C1_SDA),
+	UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, I2C1_SCL),
+	UPBOARD_UPCORE_CREX_BIT_TO_PIN(1, GPIO0),
+	UPBOARD_UPCORE_CREX_BIT_TO_PIN(1, GPIO2),
+	UPBOARD_UPCORE_CREX_BIT_TO_PIN(1, GPIO3),
+	UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, SPI2_CS1),
+	UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, SPI2_CS0),
+	UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, SPI2_MISO),
+	UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, SPI2_MOSI),
+	UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, SPI2_CLK),
+	UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, PWM0),
+	UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, PWM1),
+	UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, UART1_TXD),
+	UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, UART1_RXD),
+	UPBOARD_UPCORE_CREX_BIT_TO_PIN(1, GPIO9),
+	UPBOARD_UPCORE_CREX_BIT_TO_PIN(1, GPIO4),
+	UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, I2S2_CLK),
+	UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, I2S2_FRM),
+	UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, I2S2_RX),
+	UPBOARD_UPCORE_CREX_BIT_TO_PIN(1, I2S2_TX),
+};
+
+/*
+ * UP Core board + CRST02 carrier board data
+ */
+
+#define upboard_upcore_crst02_pins        upboard_upcore_crex_pins
+#define upboard_upcore_crst02_rpi_mapping upboard_upcore_crex_rpi_mapping
+
+static int upboard_set_mux(struct pinctrl_dev *pctldev, unsigned int function,
+			   unsigned int group)
+{
+	return 0;
+};
+
+static int upboard_fpga_request_enable(struct pinctrl_dev *pctldev,
+				       struct pinctrl_gpio_range *range,
+				       unsigned int pin)
+{
+	const struct pin_desc * const pd = pin_desc_get(pctldev, pin);
+	const struct upboard_pin *p;
+	int ret;
+
+	if (!pd)
+		return -EINVAL;
+
+	p = pd->drv_data;
+	if (p->funcbit) {
+		ret = regmap_field_write(p->funcbit, 0);
+		if (ret)
+			return ret;
+	}
+
+	if (p->enbit) {
+		ret = regmap_field_write(p->enbit, 1);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+};
+
+static int upboard_fpga_request_free(struct pinctrl_dev *pctldev,
+				     unsigned int pin)
+{
+	const struct pin_desc * const pd = pin_desc_get(pctldev, pin);
+	const struct upboard_pin *p;
+	int ret;
+
+	if (!pd)
+		return -EINVAL;
+
+	p = pd->drv_data;
+	if (p->funcbit) {
+		ret = regmap_field_write(p->funcbit, 1);
+		if (ret)
+			return ret;
+	}
+
+	if (p->enbit) {
+		ret = regmap_field_write(p->enbit, 0);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+};
+
+static int upboard_fpga_set_direction(struct pinctrl_dev *pctldev,
+				      struct pinctrl_gpio_range *range,
+				      unsigned int pin, bool input)
+{
+	const struct pin_desc * const pd = pin_desc_get(pctldev, pin);
+	const struct upboard_pin *p;
+
+	if (!pd)
+		return -EINVAL;
+
+	p = pd->drv_data;
+	upboard_fpga_request_enable(pctldev, range, pin);
+
+	return regmap_field_write(p->dirbit, input);
+};
+
+static int upboard_get_functions_count(struct pinctrl_dev *pctldev)
+{
+	return 0;
+}
+
+static const char *upboard_get_function_name(struct pinctrl_dev *pctldev,
+					     unsigned int selector)
+{
+	return NULL;
+}
+
+static int upboard_get_function_groups(struct pinctrl_dev *pctldev,
+				       unsigned int selector,
+				       const char * const **groups,
+				       unsigned int *num_groups)
+{
+	*groups = NULL;
+	*num_groups = 0;
+	return 0;
+}
+
+static const struct pinmux_ops upboard_pinmux_ops = {
+	.get_functions_count = upboard_get_functions_count,
+	.get_function_groups = upboard_get_function_groups,
+	.get_function_name = upboard_get_function_name,
+	.set_mux = upboard_set_mux,
+	.gpio_request_enable = upboard_fpga_request_enable,
+	.gpio_set_direction = upboard_fpga_set_direction,
+};
+
+static int upboard_get_groups_count(struct pinctrl_dev *pctldev)
+{
+	return 0;
+}
+
+static const char *upboard_get_group_name(struct pinctrl_dev *pctldev,
+					  unsigned int selector)
+{
+	return NULL;
+}
+
+static const struct pinctrl_ops upboard_pinctrl_ops = {
+	.get_groups_count = upboard_get_groups_count,
+	.get_group_name = upboard_get_group_name,
+};
+
+static struct pinctrl_desc upboard_up_pinctrl_desc = {
+	.pins = upboard_up_pins,
+	.npins = ARRAY_SIZE(upboard_up_pins),
+	.pctlops = &upboard_pinctrl_ops,
+	.pmxops = &upboard_pinmux_ops,
+	.owner = THIS_MODULE,
+};
+
+static struct pinctrl_desc upboard_up2_pinctrl_desc = {
+	.pins = upboard_up2_pins,
+	.npins = ARRAY_SIZE(upboard_up2_pins),
+	.pctlops = &upboard_pinctrl_ops,
+	.pmxops = &upboard_pinmux_ops,
+	.owner = THIS_MODULE,
+};
+
+static struct pinctrl_desc upboard_upcore_crex_pinctrl_desc = {
+	.pins = upboard_upcore_crex_pins,
+	.npins = ARRAY_SIZE(upboard_upcore_crex_pins),
+	.pctlops = &upboard_pinctrl_ops,
+	.pmxops = &upboard_pinmux_ops,
+	.owner = THIS_MODULE,
+};
+
+static struct pinctrl_desc upboard_upcore_crst02_pinctrl_desc = {
+	.pins = upboard_upcore_crst02_pins,
+	.npins = ARRAY_SIZE(upboard_upcore_crst02_pins),
+	.pctlops = &upboard_pinctrl_ops,
+	.pmxops = &upboard_pinmux_ops,
+	.owner = THIS_MODULE,
+};
+
+static void upboard_alt_func_enable(struct gpio_chip *gc, const char *name)
+{
+	struct upboard_pinctrl *pctrl = container_of(gc, struct upboard_pinctrl, chip);
+	int offset[gc->ngpio];
+	int i, j, cnt;
+	bool input = false;
+
+	/* find all pins */
+	for (i = 0, cnt = 0; i < pctrl->pctldesc->npins; i++) {
+		if (strstr(pctrl->pctldesc->pins[i].name, name))
+			offset[cnt++] = i;
+	}
+	for (i = 0; i < cnt; i++) {
+		if (pinctrl_gpio_request(pctrl->pins[offset[i]].gpio) == -EBUSY)
+			return; /* this pin is being used */
+		pinctrl_gpio_free(pctrl->pins[offset[i]].gpio);
+	}
+	/* change to alternate function */
+	for (i = 0; i < cnt; i++) {
+		if (pctrl->pins[offset[i]].regs == NULL)
+			continue;
+
+		if (strstr(pctrl->pctldesc->pins[offset[i]].name, "I2C")) {
+			int mode = 1;
+			unsigned int val;
+
+			switch (pctrl->ident) {
+			case 15:
+				mode = 2;
+			break;
+			}
+
+			val = readl(pctrl->pins[offset[i]].regs) |
+				    mode<<PADCFG0_PMODE_SHIFT;
+			writel(val, pctrl->pins[offset[i]].regs);
+			upboard_fpga_request_free(pctrl->pctldev, offset[i]);
+			continue;
+		} else if (strstr(pctrl->pctldesc->pins[offset[i]].name,
+				  "UART")) {
+			int mode = 1;
+			unsigned int val;
+
+			switch (pctrl->ident) {
+			case 13:
+			case 14:
+				mode = 4;
+			break;
+			case 15:
+				mode = 2;
+			break;
+			}
+
+			val = readl(pctrl->pins[offset[i]].regs) |
+				    mode<<PADCFG0_PMODE_SHIFT;
+			writel(val, pctrl->pins[offset[i]].regs);
+		} else if (strstr(pctrl->pctldesc->pins[offset[i]].name,
+				  "SPI")) {
+			int mode = 1;
+			unsigned int val;
+
+			switch (pctrl->ident) {
+			case 15:
+				mode = 7;
+			break;
+			}
+
+			val = readl(pctrl->pins[offset[i]].regs) |
+				    mode<<PADCFG0_PMODE_SHIFT;
+			writel(val, pctrl->pins[offset[i]].regs);
+		} else if (strstr(pctrl->pctldesc->pins[offset[i]].name,
+				  "I2S")) {
+			int mode = 1;
+			unsigned int val;
+
+			switch (pctrl->ident) {
+			case 15:
+				mode = 4;
+			break;
+			}
+
+			val = readl(pctrl->pins[offset[i]].regs) |
+				    mode<<PADCFG0_PMODE_SHIFT;
+			writel(val, pctrl->pins[offset[i]].regs);
+		} else {
+			unsigned int val;
+
+			val = readl(pctrl->pins[offset[i]].regs) |
+				    1<<PADCFG0_PMODE_SHIFT;
+			writel(val, pctrl->pins[offset[i]].regs);
+		}
+
+		/* input pins */
+		if (strstr(pctrl->pctldesc->pins[offset[i]].name, "RX"))
+			input = true;
+		if (strstr(pctrl->pctldesc->pins[offset[i]].name, "CTS"))
+			input = true;
+		if (strstr(pctrl->pctldesc->pins[offset[i]].name, "ADC"))
+			input = true;
+		if (strstr(pctrl->pctldesc->pins[offset[i]].name, "MISO"))
+			input = true;
+		if (strstr(pctrl->pctldesc->pins[offset[i]].name, "DIN"))
+			input = true;
+		upboard_fpga_set_direction(pctrl->pctldev, NULL, offset[i],
+					   input);
+	}
+}
+
+static int upboard_rpi_to_native_gpio(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct upboard_pinctrl *pctrl = container_of(gc, struct upboard_pinctrl, chip);
+	unsigned int pin = pctrl->rpi_mapping[gpio];
+	struct pinctrl_gpio_range *range;
+
+	range = pinctrl_find_gpio_range_from_pin(pctrl->pctldev, pin);
+	if (!range)
+		return -ENODEV;
+
+	return range->base;
+}
+
+static int upboard_gpio_request(struct gpio_chip *gc, unsigned int offset)
+{
+	struct upboard_pinctrl *pctrl = container_of(gc, struct upboard_pinctrl, chip);
+	int gpio = upboard_rpi_to_native_gpio(gc, offset);
+
+	if (gpio < 0)
+		return gpio;
+
+	return pinctrl_gpio_request(gpio);
+}
+
+static void upboard_gpio_free(struct gpio_chip *gc, unsigned int offset)
+{
+	struct upboard_pinctrl *pctrl = container_of(gc, struct upboard_pinctrl, chip);
+	int gpio = upboard_rpi_to_native_gpio(gc, offset);
+	unsigned int pin = pctrl->rpi_mapping[offset];
+	char name[strlen(pctrl->pctldesc->pins[pin].name)];
+	char *p;
+
+	if (gpio < 0)
+		return;
+
+	pinctrl_gpio_free(gpio);
+
+	strcpy(name, pctrl->pctldesc->pins[pin].name);
+	p = name;
+	upboard_alt_func_enable(gc, strsep(&p, "_"));
+}
+
+static int upboard_gpio_get(struct gpio_chip *gc, unsigned int offset)
+{
+	int gpio = upboard_rpi_to_native_gpio(gc, offset);
+
+	if (gpio < 0)
+		return gpio;
+
+	return gpiod_get_value(gpio_to_desc(gpio));
+}
+
+static void upboard_gpio_set(struct gpio_chip *gc, unsigned int offset,
+			     int value)
+{
+	struct upboard_pinctrl *pctrl = container_of(gc, struct upboard_pinctrl, chip);
+	unsigned int pin = pctrl->rpi_mapping[offset];
+	int gpio = upboard_rpi_to_native_gpio(gc, offset);
+
+	if (gpio < 0)
+		return;
+
+	gpiod_set_value(gpio_to_desc(gpio), value);
+
+	/* APL03 open drain GPIO */
+	if (pctrl->ident == 9) {
+		if (pin == 0 || pin == 1) {
+			int val = readl(pctrl->pins[pin].regs);
+
+			if (value)
+				val |= PADCFG0_GPIOTXDIS;
+			else
+				val &= ~PADCFG0_GPIOTXDIS;
+			writel(val, pctrl->pins[pin].regs);
+		}
+	}
+}
+
+static int upboard_gpio_direction_input(struct gpio_chip *gc,
+					unsigned int offset)
+{
+	int gpio = upboard_rpi_to_native_gpio(gc, offset);
+	struct upboard_pinctrl *pctrl = container_of(gc, struct upboard_pinctrl, chip);
+	unsigned int pin = pctrl->rpi_mapping[offset];
+	struct pinctrl_gpio_range *range;
+
+	range = pinctrl_find_gpio_range_from_pin(pctrl->pctldev, pin);
+	upboard_fpga_set_direction(pctrl->pctldev, range, pin, true);
+
+	if (gpio < 0)
+		return gpio;
+
+	return gpiod_direction_input(gpio_to_desc(gpio));
+}
+
+static int upboard_gpio_direction_output(struct gpio_chip *gc,
+					 unsigned int offset, int value)
+{
+	int gpio = upboard_rpi_to_native_gpio(gc, offset);
+	struct upboard_pinctrl *pctrl = container_of(gc, struct upboard_pinctrl, chip);
+	unsigned int pin = pctrl->rpi_mapping[offset];
+	struct pinctrl_gpio_range *range;
+
+	range = pinctrl_find_gpio_range_from_pin(pctrl->pctldev, pin);
+	upboard_fpga_set_direction(pctrl->pctldev, range, pin, false);
+
+	if (gpio < 0)
+		return gpio;
+
+	return gpiod_direction_output(gpio_to_desc(gpio), value);
+}
+
+static struct gpio_chip upboard_gpio_chip = {
+	.label = "Raspberry Pi compatible UP GPIO",
+	.base = 0,
+	.request = upboard_gpio_request,
+	.free = upboard_gpio_free,
+	.get = upboard_gpio_get,
+	.set = upboard_gpio_set,
+	.direction_input = upboard_gpio_direction_input,
+	.direction_output = upboard_gpio_direction_output,
+	.owner = THIS_MODULE,
+};
+
+/* DMI Matches for older bios without fpga initialization */
+static const struct dmi_system_id upboard_dmi_table[] __initconst = {
+	{
+		.matches = { /* UP */
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AAEON"),
+			DMI_EXACT_MATCH(DMI_BOARD_NAME, "UP-CHT01"),
+			DMI_EXACT_MATCH(DMI_BOARD_VERSION, "V0.4"),
+		},
+	},
+	{
+		.matches = { /* UP2 */
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AAEON"),
+			DMI_EXACT_MATCH(DMI_BOARD_NAME, "UP-APL01"),
+			DMI_EXACT_MATCH(DMI_BOARD_VERSION, "V0.3"),
+		},
+	},
+	{
+		.ident = 9,
+		.matches = { /* UP2 */
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AAEON"),
+			DMI_EXACT_MATCH(DMI_BOARD_NAME, "UP-APL03"),
+		},
+	},
+	{
+		.ident = 13,
+		.matches = { /* UP 6000 */
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AAEON"),
+			DMI_EXACT_MATCH(DMI_BOARD_NAME, "UPN-EHL01"),
+		},
+	},
+	{
+		.ident = 14,
+		.matches = { /* UP squared v2 */
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AAEON"),
+			DMI_EXACT_MATCH(DMI_BOARD_NAME, "UPS-EHL01"),
+		},
+	},
+	{
+		.ident = 15,
+		.matches = { /* UP Xtreme i12 */
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AAEON"),
+			DMI_EXACT_MATCH(DMI_BOARD_NAME, "UPX-ADLP01"),
+		},
+	},
+	{ }	/* Terminating entry */
+};
+
+bool regmap_check_writeable(struct upboard_fpga *fpga, unsigned int reg)
+{
+	if (!fpga)
+		return -ENOMEM;
+
+	if (fpga->regmapconf->max_register &&
+	    reg > fpga->regmapconf->max_register)
+		return false;
+
+	if (fpga->regmapconf->writeable_reg)
+		return fpga->regmapconf->writeable_reg(fpga->dev, reg);
+
+	if (fpga->regmapconf->wr_table)
+		return regmap_check_range_table(fpga->regmap, reg,
+						fpga->regmapconf->wr_table);
+
+	return true;
+}
+
+static void __iomem *upboard_get_regs(struct gpio_chip *gc, unsigned int pin,
+				      unsigned int reg)
+{
+	struct platform_device *pdev = to_platform_device(gc->parent);
+	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	size_t nregs;
+	void __iomem *base;
+	u32 offset, value;
+
+	/* UP ADL/TGL */
+	if (strstr(dev_name(&pdev->dev), "INTC1055:00") ||
+	    strstr(dev_name(&pdev->dev), "INT34C5:00")) {
+		struct intel_pinctrl *intel_pctrl = gpiochip_get_data(gc);
+		struct pinctrl_dev *pctldev;
+		struct pinctrl_gpio_range *range;
+
+		pctldev = intel_pctrl->pctldev;
+		if (pctldev == NULL)
+			return NULL;
+
+		range = pinctrl_find_gpio_range_from_pin(pctldev, pin);
+		if (range)
+			pin = pin - range->pin_base;
+		else
+			return NULL;
+
+		if (range->pin_base < 67)
+			res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+		else if (range->pin_base < 171)
+			res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+		else if (range->pin_base < 260)
+			res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
+		else
+			res = platform_get_resource(pdev, IORESOURCE_MEM, 3);
+	}
+
+	if (IS_ERR(res)) {
+		dev_err(gc->parent, "upboard resource get failed");
+		return NULL;
+	}
+
+	base = devm_ioremap(&pdev->dev, res->start, resource_size(res));
+	offset = readl(base + PADBAR);
+	value = readl(base + REVID);
+
+	if (((value & REVID_MASK) >> REVID_SHIFT) >= 0x94)
+		nregs = 4;
+	else
+		nregs = 2;
+
+	return base + offset + reg + pin * nregs * 4;
+}
+
+int upboard_acpi_node_pin_mapping(struct upboard_fpga *fpga,
+				  struct upboard_pinctrl *pctrl,
+				  const char *propname,
+				  const char *pinctl_name,
+				  unsigned int pin_offset)
+{
+	struct gpio_descs *descs;
+	int ret, i;
+
+	descs = devm_gpiod_get_array(fpga->dev, propname, GPIOD_ASIS);
+	if (IS_ERR(descs)) {
+		ret = PTR_ERR(descs);
+		if (ret != -EPROBE_DEFER)
+			dev_err(fpga->dev, "Failed to get %s gpios", propname);
+		return ret;
+	}
+
+	for (i = 0; i < descs->ndescs; i++) {
+		struct gpio_desc *desc = descs->desc[i];
+		struct gpio_chip *gc = gpiod_to_chip(desc);
+
+		pctrl->pins[i].gpio = desc_to_gpio(desc);
+		pctrl->pins[i].base = gc->base;
+		pctrl->pins[i].irq = gpiod_to_irq(desc);
+		pctrl->pins[i].regs =
+			upboard_get_regs(gc,
+					 desc_to_gpio(desc) - gc->base,
+					 PADCFG0);
+
+		/* The GPIOs may not be contiguous, so add them 1-by-1 */
+		ret = gpiochip_add_pin_range(gpiod_to_chip(desc), pinctl_name,
+					     desc_to_gpio(desc) - gc->base,
+					     pin_offset + i, 1);
+		if (ret)
+			return ret;
+	}
+
+	/* dispose acpi resource */
+	devm_gpiod_put_array(fpga->dev, descs);
+
+	return ret;
+}
+
+static void upboard_irq_ack(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+
+	dev_info(NULL, "upboard_irq_ack");
+}
+
+static void upboard_irq_mask(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+
+	dev_info(NULL, "upboard_irq_mask");
+}
+
+static void upboard_irq_unmask(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+
+	dev_info(NULL, "upboard_irq_unmask");
+}
+
+static int upboard_irq_type(struct irq_data *d, unsigned int type)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+
+	dev_info(NULL, "upboard_irq_type");
+
+	return 0;
+}
+
+static irqreturn_t upboard_gpio_irq_handler(int irq, void *data)
+{
+	generic_handle_irq(irq);
+	return IRQ_HANDLED;
+}
+
+static int upboard_irq_chip_set_type(struct irq_data *data, unsigned int type)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(data);
+	struct upboard_pinctrl *pctrl = container_of(gc, struct upboard_pinctrl, chip);
+	unsigned int offset = irqd_to_hwirq(data);
+
+	data->parent_data = irq_get_irq_data(pctrl->pins[offset].irq);
+	if (data->parent_data) {
+		dev_info(NULL, "%s: no NULL", __func__);
+		return irq_chip_set_type_parent(data, type);
+	}
+
+	dev_info(NULL, "%s: NULL", __func__);
+	return 0;
+}
+
+static struct irq_chip upboard_gpio_irqchip = {
+	.name = "upboard-gpio-irq",
+	.irq_ack = upboard_irq_ack,
+	.irq_mask = upboard_irq_mask,
+	.irq_unmask = upboard_irq_unmask,
+	.irq_set_type = upboard_irq_chip_set_type,
+	.flags = IRQCHIP_MASK_ON_SUSPEND | IRQCHIP_SKIP_SET_WAKE,
+};
+
+static int __init upboard_pinctrl_probe(struct platform_device *pdev)
+{
+	struct upboard_fpga * const fpga = dev_get_drvdata(pdev->dev.parent);
+	struct acpi_device * const adev = ACPI_COMPANION(&pdev->dev);
+	struct pinctrl_desc *pctldesc;
+	struct upboard_pinctrl *pctrl;
+	struct upboard_pin *pins;
+	const struct dmi_system_id *system_id;
+	const char *hid;
+	const unsigned int *rpi_mapping;
+	unsigned int ngpio;
+	int ret;
+	int i;
+
+	if (!fpga)
+		return -EINVAL;
+
+	if (!adev)
+		return -ENODEV;
+
+	hid = acpi_device_hid(adev);
+	if (!strcmp(hid, "AANT0F00") || !strcmp(hid, "AANT0F04") ||
+	    !strcmp(hid, "AANT0000")) {
+		pctldesc = &upboard_up_pinctrl_desc;
+		rpi_mapping = upboard_up_rpi_mapping;
+		ngpio  = ARRAY_SIZE(upboard_up_rpi_mapping);
+	} else if (!strcmp(hid, "AANT0F01")) {
+		pctldesc = &upboard_up2_pinctrl_desc;
+		rpi_mapping = upboard_up2_rpi_mapping;
+		ngpio  = ARRAY_SIZE(upboard_up2_rpi_mapping);
+	} else if (!strcmp(hid, "AANT0F02")) {
+		pctldesc = &upboard_upcore_crex_pinctrl_desc;
+		rpi_mapping = upboard_upcore_crex_rpi_mapping;
+		ngpio  = ARRAY_SIZE(upboard_upcore_crex_rpi_mapping);
+	} else if (!strcmp(hid, "AANT0F03")) {
+		pctldesc = &upboard_upcore_crst02_pinctrl_desc;
+		rpi_mapping = upboard_upcore_crst02_rpi_mapping;
+		ngpio  = ARRAY_SIZE(upboard_upcore_crst02_rpi_mapping);
+	} else
+		return -ENODEV;
+
+	pctldesc->name = dev_name(&pdev->dev);
+
+	pins = devm_kzalloc(&pdev->dev,
+			    sizeof(*pins) * pctldesc->npins,
+			    GFP_KERNEL);
+	if (!pins)
+		return -ENOMEM;
+
+	/* initialise pins */
+	for (i = 0; i < pctldesc->npins; i++) {
+		struct upboard_pin *pin = &pins[i];
+		struct pinctrl_pin_desc *pd =
+			(struct pinctrl_pin_desc *) &pctldesc->pins[i];
+		struct reg_field fldconf = {0};
+		unsigned int regoff = (pd->number / UPFPGA_REGISTER_SIZE);
+		unsigned int lsb = pd->number % UPFPGA_REGISTER_SIZE;
+
+		pin->funcbit = NULL;
+
+		if (pd->drv_data) {
+			fldconf = *(struct reg_field *)pd->drv_data;
+			if (!regmap_check_writeable(fpga, fldconf.reg))
+				return -EINVAL;
+
+			pin->funcbit = devm_regmap_field_alloc(&pdev->dev,
+							       fpga->regmap,
+							       fldconf);
+			if (IS_ERR(pin->funcbit))
+				return PTR_ERR(pin->funcbit);
+		}
+
+		pin->enbit = NULL;
+		fldconf.reg = UPFPGA_REG_GPIO_EN0 + regoff;
+		fldconf.lsb = lsb;
+		fldconf.msb = lsb;
+
+		/* some platform don't have enable bit, ignore if not present */
+		if (regmap_check_writeable(fpga, fldconf.reg)) {
+			pin->enbit = devm_regmap_field_alloc(&pdev->dev,
+							     fpga->regmap,
+							     fldconf);
+			if (IS_ERR(pin->enbit))
+				return PTR_ERR(pin->enbit);
+		}
+
+		fldconf.reg = UPFPGA_REG_GPIO_DIR0 + regoff;
+		fldconf.lsb = lsb;
+		fldconf.msb = lsb;
+
+		if (!regmap_check_writeable(fpga, fldconf.reg))
+			return -EINVAL;
+
+		pin->dirbit = devm_regmap_field_alloc(&pdev->dev,
+						      fpga->regmap,
+						      fldconf);
+		if (IS_ERR(pin->dirbit))
+			return PTR_ERR(pin->dirbit);
+
+		pd->drv_data = pin;
+	}
+
+	/* create a new pinctrl device and register it */
+	pctrl = devm_kzalloc(&pdev->dev, sizeof(*pctrl), GFP_KERNEL);
+	if (!pctrl)
+		return -ENOMEM;
+
+	pctrl->regmap = fpga->regmap;
+	pctrl->rpi_mapping = rpi_mapping;
+	pctrl->chip = upboard_gpio_chip;
+	pctrl->pctldesc = pctldesc;
+	pctrl->chip.parent = &pdev->dev;
+	pctrl->chip.ngpio = ngpio;
+	pctrl->pins = pins;
+	pctrl->chip.irq.chip = &upboard_gpio_irqchip;
+
+	ret = devm_gpiochip_add_data(&pdev->dev, &pctrl->chip, pctrl);
+	if (ret)
+		return ret;
+
+	pctrl->pctldev = devm_pinctrl_register(&pdev->dev, pctldesc, pctrl);
+	if (IS_ERR(pctrl->pctldev))
+		return PTR_ERR(pctrl->pctldev);
+
+	/* add acpi pin mapping according to external-gpios key */
+	ret = upboard_acpi_node_pin_mapping(fpga, pctrl,
+					"external",
+					dev_name(&pdev->dev),
+					0);
+	if (ret)
+		return ret;
+
+	upboard_alt_func_enable(&pctrl->chip, "I2C");
+	upboard_alt_func_enable(&pctrl->chip, "SPI");
+	upboard_alt_func_enable(&pctrl->chip, "UART");
+	upboard_alt_func_enable(&pctrl->chip, "I2S");
+	upboard_alt_func_enable(&pctrl->chip, "PWM");
+	upboard_alt_func_enable(&pctrl->chip, "ADC");
+	upboard_alt_func_enable(&pctrl->chip, "NONAME"); /* for UP2 I2C pins */
+
+	return ret;
+}
+
+static struct platform_driver upboard_pinctrl_driver = {
+	.driver = {
+		.name = "upboard-pinctrl",
+	},
+};
+module_platform_driver_probe(upboard_pinctrl_driver, upboard_pinctrl_probe);
+
+MODULE_AUTHOR("Gary Wang <garywang@aaeon.com.tw>");
+MODULE_AUTHOR("Javier Arteaga <javier@emutex.com>");
+MODULE_AUTHOR("Dan O'Donovan <dan@emutex.com>");
+MODULE_AUTHOR("Nicola Lunghi <nicolal@emutex.com>");
+MODULE_DESCRIPTION("UP Board HAT pin controller driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:upboard-pinctrl");