diff mbox series

[v3,8/9] ARM: dts: r9a06g032: Add the USBF controller node

Message ID 20221207162435.1001782-9-herve.codina@bootlin.com
State New
Headers
Series Add the Renesas USBF controller support |

Commit Message

Herve Codina Dec. 7, 2022, 4:24 p.m. UTC 
  Add the USBF controller available in the r9a06g032 SoC.

Signed-off-by: Herve Codina <herve.codina@bootlin.com>
---
 arch/arm/boot/dts/r9a06g032.dtsi | 13 +++++++++++++
 1 file changed, 13 insertions(+)

Comments

Geert Uytterhoeven Dec. 8, 2022, 9:09 a.m. UTC | #1 
On Wed, Dec 7, 2022 at 5:25 PM Herve Codina <herve.codina@bootlin.com> wrote:
> Add the USBF controller available in the r9a06g032 SoC.
>
> Signed-off-by: Herve Codina <herve.codina@bootlin.com>

My
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
on v2 is still valid.

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds
Herve Codina Dec. 13, 2022, 1:27 p.m. UTC | #2 
Hi Geert,

On Thu, 8 Dec 2022 10:09:01 +0100
Geert Uytterhoeven <geert@linux-m68k.org> wrote:

> On Wed, Dec 7, 2022 at 5:25 PM Herve Codina <herve.codina@bootlin.com> wrote:
> > Add the USBF controller available in the r9a06g032 SoC.
> >
> > Signed-off-by: Herve Codina <herve.codina@bootlin.com>  
> 
> My
> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
> on v2 is still valid.
> 

Will be added in v4.

Thanks for the review,
Hervé
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/r9a06g032.dtsi b/arch/arm/boot/dts/r9a06g032.dtsi
index 401c88bcdd51..d3c459537dbb 100644
--- a/arch/arm/boot/dts/r9a06g032.dtsi
+++ b/arch/arm/boot/dts/r9a06g032.dtsi
@@ -117,6 +117,19 @@  dmamux: dma-router@a0 {
 			};
 		};
 
+		udc: usb@4001e000 {
+			compatible = "renesas,r9a06g032-usbf", "renesas,rzn1-usbf";
+			reg = <0x4001e000 0x2000>;
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sysctrl R9A06G032_HCLK_USBF>,
+				 <&sysctrl R9A06G032_HCLK_USBPM>;
+			clock-names = "hclkf", "hclkpm";
+			power-domains = <&sysctrl>;
+			depends-on = <&sysctrl>;
+			status = "disabled";
+		};
+
 		pci_usb: pci@40030000 {
 			compatible = "renesas,pci-r9a06g032", "renesas,pci-rzn1";
 			device_type = "pci";