[RFC,v4,1/1] serial: core: Start managing serial controllers to enable runtime PM
Commit Message
We want to enable runtime PM for serial port device drivers in a generic
way. To do this, we want to have the serial core layer manage the
registered physical serial controller devices.
To do this, let's set up a struct device for the serial core controller
as suggested by Greg and Jiri. The serial core controller devices are
children of the physical serial port device. The serial core controller
device is needed to support multiple different kind of ports connected
to single physical serial port device.
Let's also set up a struct device for the serial core port. The serial
core port instances are children of the serial core controller device.
With the serial core port device we can now flush pending TX on the
runtime PM resume as suggested by Johan.
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Jiri Slaby <jirislaby@kernel.org>
Suggested-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
Changes since v3:
- Simplify things by adding a serial core control device as the child of
the physical serial port as suggested by Jiri
- Drop the tinkering of the physical serial port device for runtime PM.
Serial core just needs to manage port->port_dev with the addition of
the serial core control device and the device hierarchy will keep the
pysical serial port device enabled as needed
- Simplify patch description with all the runtime PM tinkering gone
- Coding style improvments as noted by Andy
- Post as a single RFC patch as we're close to the merge window
Changes since v2:
- Make each serial port a proper device as suggested by Greg. This is
a separate patch that flushes the TX on runtime PM resume
Changes since v1:
- Use kref as suggested by Andy
- Fix memory leak on error as noted by Andy
- Use use unsigned char for supports_autosuspend as suggested by Andy
- Coding style improvments as suggested by Andy
---
drivers/tty/serial/8250/8250_core.c | 1 +
drivers/tty/serial/Makefile | 2 +-
drivers/tty/serial/serial_core.c | 184 ++++++++++++++++++++++++++--
drivers/tty/serial/serial_ctrl.c | 61 +++++++++
drivers/tty/serial/serial_ctrl.h | 19 +++
drivers/tty/serial/serial_port.c | 108 ++++++++++++++++
include/linux/serial_core.h | 4 +-
7 files changed, 370 insertions(+), 9 deletions(-)
create mode 100644 drivers/tty/serial/serial_ctrl.c
create mode 100644 drivers/tty/serial/serial_ctrl.h
create mode 100644 drivers/tty/serial/serial_port.c
Comments
On Wed, Dec 07, 2022 at 02:43:05PM +0200, Tony Lindgren wrote:
> We want to enable runtime PM for serial port device drivers in a generic
> way. To do this, we want to have the serial core layer manage the
> registered physical serial controller devices.
>
> To do this, let's set up a struct device for the serial core controller
> as suggested by Greg and Jiri. The serial core controller devices are
> children of the physical serial port device. The serial core controller
> device is needed to support multiple different kind of ports connected
> to single physical serial port device.
>
> Let's also set up a struct device for the serial core port. The serial
> core port instances are children of the serial core controller device.
> With the serial core port device we can now flush pending TX on the
> runtime PM resume as suggested by Johan.
...
> +static struct platform_device *serial_core_device_add(struct uart_port *port,
> + const char *name,
> + struct device *parent_dev,
> + void *pdata,
> + int pdata_size)
> +{
> + struct platform_device_info pinfo;
' = {}' can also work instead of memset(), but up to you.
> + memset(&pinfo, 0, sizeof(pinfo));
> + pinfo.name = name;
> + pinfo.id = PLATFORM_DEVID_AUTO;
> + pinfo.parent = parent_dev;
> + pinfo.data = pdata;
> + pinfo.size_data = pdata_size;
> +
> + return platform_device_register_full(&pinfo);
> +}
...
> + struct serial_port_platdata pdata;
Ditto.
> + memset(&pdata, 0, sizeof(pdata));
...
> +int serial_core_register_port(struct uart_driver *drv, struct uart_port *port)
> +{
> + bool allocated = false;
Not sure why this is needed.
> + struct device *ctrl_dev;
> + int ret;
> +
> + ret = serial_core_add_one_port(drv, port);
> + if (ret)
> + return ret;
> +
> + mutex_lock(&port_mutex);
> +
> + /* Inititalize a serial core controller device if needed */
> + ctrl_dev = serial_core_ctrl_find(drv, port->dev, port->ctrl_id);
> + if (!ctrl_dev) {
> + ctrl_dev = serial_core_ctrl_device_add(port);
> + if (!ctrl_dev)
> + goto err_remove_port;
> + allocated = true;
> + }
Wouldn't be slightly better
ctrl_dev = serial_core_ctrl_find(drv, port->dev, port->ctrl_id);
if (!ctrl_dev)
ctrl_dev = serial_core_ctrl_device_add(port);
if (!ctrl_dev)
goto err_remove_port;
?
> + /* Initialize a serial core port device */
> + ret = serial_core_port_device_add(ctrl_dev, port);
> + if (ret)
> + goto err_del_ctrl_dev;
> +
> + mutex_unlock(&port_mutex);
> +
> + return 0;
> +
> +err_del_ctrl_dev:
> + if (allocated)
> + platform_device_del(to_platform_device(ctrl_dev));
Shouldn't you call platform_device_unregister()?
> +err_remove_port:
> + mutex_unlock(&port_mutex);
> +
> + return serial_core_remove_one_port(drv, port);
> +}
...
> + platform_device_del(to_platform_device(port_dev));
Ditto?
...
> + /* Drop the serial core controller device if no ports are using it */
> + if (!serial_core_ctrl_find(drv, port->dev, port->ctrl_id))
> + platform_device_del(to_platform_device(ctrl_dev));
Ditto?
...
> +/* Serial core controller data. Serial port device drivers do not need this. */
Some missing forward declarations?
struct uart_driver:
struct uart_port;
?
...
> +static DEFINE_RUNTIME_DEV_PM_OPS(serial_port_pm, NULL,
> + serial_port_runtime_resume, NULL);
Wouldn't be more logical to indent like
static DEFINE_RUNTIME_DEV_PM_OPS(serial_port_pm,
NULL, serial_port_runtime_resume,
NULL);
?
On Wed, Dec 07, 2022 at 10:22:11PM +0200, Andy Shevchenko wrote:
> On Wed, Dec 07, 2022 at 02:43:05PM +0200, Tony Lindgren wrote:
...
> > +int serial_core_register_port(struct uart_driver *drv, struct uart_port *port)
> > +{
>
> > + bool allocated = false;
>
> Not sure why this is needed.
Okay, I got it.
Still, see below.
> > + struct device *ctrl_dev;
> > + int ret;
> > +
> > + ret = serial_core_add_one_port(drv, port);
> > + if (ret)
> > + return ret;
> > +
> > + mutex_lock(&port_mutex);
> > +
> > + /* Inititalize a serial core controller device if needed */
> > + ctrl_dev = serial_core_ctrl_find(drv, port->dev, port->ctrl_id);
> > + if (!ctrl_dev) {
> > + ctrl_dev = serial_core_ctrl_device_add(port);
> > + if (!ctrl_dev)
> > + goto err_remove_port;
> > + allocated = true;
> > + }
>
> Wouldn't be slightly better
>
> ctrl_dev = serial_core_ctrl_find(drv, port->dev, port->ctrl_id);
> if (!ctrl_dev)
> ctrl_dev = serial_core_ctrl_device_add(port);
> if (!ctrl_dev)
> goto err_remove_port;
>
> ?
>
> > + /* Initialize a serial core port device */
> > + ret = serial_core_port_device_add(ctrl_dev, port);
> > + if (ret)
> > + goto err_del_ctrl_dev;
> > +
> > + mutex_unlock(&port_mutex);
> > +
> > + return 0;
> > +
> > +err_del_ctrl_dev:
> > + if (allocated)
We can avoid this check by caching the platform device.
struct platform_device *ctrl_pdev = NULL;
if (...) {
ctrl_pdev = to_platform_device(ctrl_dev);
}
platform_device_del(ctrl_pdev);
> > + platform_device_del(to_platform_device(ctrl_dev));
>
> Shouldn't you call platform_device_unregister()?
>
> > +err_remove_port:
> > + mutex_unlock(&port_mutex);
> > +
> > + return serial_core_remove_one_port(drv, port);
> > +}
* Andy Shevchenko <andriy.shevchenko@intel.com> [221207 20:28]:
> We can avoid this check by caching the platform device.
>
> struct platform_device *ctrl_pdev = NULL;
>
> if (...) {
> ctrl_pdev = to_platform_device(ctrl_dev);
> }
>
> platform_device_del(ctrl_pdev);
OK yeah that's nicer :)
> > Shouldn't you call platform_device_unregister()?
Outside the error path it should be platform_device_unregister(),
I'll check. Thanks also for your other comments.
Regards,
Tony
* Tony Lindgren <tony@atomide.com> [221208 05:52]:
> * Andy Shevchenko <andriy.shevchenko@intel.com> [221207 20:28]:
> > We can avoid this check by caching the platform device.
> >
> > struct platform_device *ctrl_pdev = NULL;
> >
> > if (...) {
> > ctrl_pdev = to_platform_device(ctrl_dev);
> > }
> >
> > platform_device_del(ctrl_pdev);
>
> OK yeah that's nicer :)
>
> > > Shouldn't you call platform_device_unregister()?
>
> Outside the error path it should be platform_device_unregister(),
> I'll check. Thanks also for your other comments.
To me looks like we should just use platform_device_unregister()
in call cases here like you noted.
Regards,
Tony
On Wed, 7 Dec 2022, Tony Lindgren wrote:
> We want to enable runtime PM for serial port device drivers in a generic
> way. To do this, we want to have the serial core layer manage the
> registered physical serial controller devices.
>
> To do this, let's set up a struct device for the serial core controller
> as suggested by Greg and Jiri. The serial core controller devices are
> children of the physical serial port device. The serial core controller
> device is needed to support multiple different kind of ports connected
> to single physical serial port device.
>
> Let's also set up a struct device for the serial core port. The serial
> core port instances are children of the serial core controller device.
> With the serial core port device we can now flush pending TX on the
> runtime PM resume as suggested by Johan.
>
> Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Suggested-by: Jiri Slaby <jirislaby@kernel.org>
> Suggested-by: Johan Hovold <johan@kernel.org>
> Signed-off-by: Tony Lindgren <tony@atomide.com>
> ---
>
> Changes since v3:
>
> - Simplify things by adding a serial core control device as the child of
> the physical serial port as suggested by Jiri
>
> - Drop the tinkering of the physical serial port device for runtime PM.
> Serial core just needs to manage port->port_dev with the addition of
> the serial core control device and the device hierarchy will keep the
> pysical serial port device enabled as needed
>
> - Simplify patch description with all the runtime PM tinkering gone
>
> - Coding style improvments as noted by Andy
>
> - Post as a single RFC patch as we're close to the merge window
>
> Changes since v2:
>
> - Make each serial port a proper device as suggested by Greg. This is
> a separate patch that flushes the TX on runtime PM resume
>
> Changes since v1:
>
> - Use kref as suggested by Andy
>
> - Fix memory leak on error as noted by Andy
>
> - Use use unsigned char for supports_autosuspend as suggested by Andy
>
> - Coding style improvments as suggested by Andy
>
> ---
> + ret = serial_core_add_one_port(drv, port);
> + if (ret)
> + return ret;
> +
> + mutex_lock(&port_mutex);
> +
> + /* Inititalize a serial core controller device if needed */
> + ctrl_dev = serial_core_ctrl_find(drv, port->dev, port->ctrl_id);
> + if (!ctrl_dev) {
> + ctrl_dev = serial_core_ctrl_device_add(port);
> + if (!ctrl_dev)
> + goto err_remove_port;
> + allocated = true;
> + }
> +
> + /* Initialize a serial core port device */
> + ret = serial_core_port_device_add(ctrl_dev, port);
How is ->port_dev supposed to work here?
->port_dev is not set until in serial_core_port_device_add() but you made
serial_core_add_one_port() call before that.
* Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> [221208 09:12]:
> On Wed, 7 Dec 2022, Tony Lindgren wrote:
> > + ret = serial_core_add_one_port(drv, port);
> > + if (ret)
> > + return ret;
> > +
> > + mutex_lock(&port_mutex);
> > +
> > + /* Inititalize a serial core controller device if needed */
> > + ctrl_dev = serial_core_ctrl_find(drv, port->dev, port->ctrl_id);
> > + if (!ctrl_dev) {
> > + ctrl_dev = serial_core_ctrl_device_add(port);
> > + if (!ctrl_dev)
> > + goto err_remove_port;
> > + allocated = true;
> > + }
> > +
> > + /* Initialize a serial core port device */
> > + ret = serial_core_port_device_add(ctrl_dev, port);
>
> How is ->port_dev supposed to work here?
>
> ->port_dev is not set until in serial_core_port_device_add() but you made
> serial_core_add_one_port() call before that.
Hmm do you mean you want to call serial_core_add_one_port() later after
serial_core_port_device_add()?
Or are you seeing some uninitialized use of port->port_dev (and not
port->dev)?
Regards,
Tony
On Thu, 8 Dec 2022, Tony Lindgren wrote:
> * Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> [221208 09:12]:
> > On Wed, 7 Dec 2022, Tony Lindgren wrote:
> > > + ret = serial_core_add_one_port(drv, port);
> > > + if (ret)
> > > + return ret;
> > > +
> > > + mutex_lock(&port_mutex);
> > > +
> > > + /* Inititalize a serial core controller device if needed */
> > > + ctrl_dev = serial_core_ctrl_find(drv, port->dev, port->ctrl_id);
> > > + if (!ctrl_dev) {
> > > + ctrl_dev = serial_core_ctrl_device_add(port);
> > > + if (!ctrl_dev)
> > > + goto err_remove_port;
> > > + allocated = true;
> > > + }
> > > +
> > > + /* Initialize a serial core port device */
> > > + ret = serial_core_port_device_add(ctrl_dev, port);
> >
> > How is ->port_dev supposed to work here?
> >
> > ->port_dev is not set until in serial_core_port_device_add() but you made
> > serial_core_add_one_port() call before that.
>
> Hmm do you mean you want to call serial_core_add_one_port() later after
> serial_core_port_device_add()?
>
> Or are you seeing some uninitialized use of port->port_dev (and not
> port->dev)?
With the other patch on top of this, yes, I did see uninitialized
port->port_dev already in serial_core_add_one_port()->uart_configure_port().
While that could be solved by removing the pm_runtime_*() calls from
there, I think it's a generic problem because after
serial_core_add_one_port() the port can have anything happening on it, no?
* Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> [221208 10:48]:
> On Thu, 8 Dec 2022, Tony Lindgren wrote:
>
> > * Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> [221208 09:12]:
> > > On Wed, 7 Dec 2022, Tony Lindgren wrote:
> > > > + ret = serial_core_add_one_port(drv, port);
> > > > + if (ret)
> > > > + return ret;
> > > > +
> > > > + mutex_lock(&port_mutex);
> > > > +
> > > > + /* Inititalize a serial core controller device if needed */
> > > > + ctrl_dev = serial_core_ctrl_find(drv, port->dev, port->ctrl_id);
> > > > + if (!ctrl_dev) {
> > > > + ctrl_dev = serial_core_ctrl_device_add(port);
> > > > + if (!ctrl_dev)
> > > > + goto err_remove_port;
> > > > + allocated = true;
> > > > + }
> > > > +
> > > > + /* Initialize a serial core port device */
> > > > + ret = serial_core_port_device_add(ctrl_dev, port);
> > >
> > > How is ->port_dev supposed to work here?
> > >
> > > ->port_dev is not set until in serial_core_port_device_add() but you made
> > > serial_core_add_one_port() call before that.
> >
> > Hmm do you mean you want to call serial_core_add_one_port() later after
> > serial_core_port_device_add()?
> >
> > Or are you seeing some uninitialized use of port->port_dev (and not
> > port->dev)?
>
> With the other patch on top of this, yes, I did see uninitialized
> port->port_dev already in serial_core_add_one_port()->uart_configure_port().
> While that could be solved by removing the pm_runtime_*() calls from
> there, I think it's a generic problem because after
> serial_core_add_one_port() the port can have anything happening on it, no?
OK. Sounds like it should get sorted out by moving the call to
serial_core_add_one_port() to happen after the devices are created.
Regards,
Tony
Hi Ilpo,
* Tony Lindgren <tony@atomide.com> [221208 11:13]:
> * Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> [221208 10:48]:
> > With the other patch on top of this, yes, I did see uninitialized
> > port->port_dev already in serial_core_add_one_port()->uart_configure_port().
> > While that could be solved by removing the pm_runtime_*() calls from
> > there, I think it's a generic problem because after
> > serial_core_add_one_port() the port can have anything happening on it, no?
>
> OK. Sounds like it should get sorted out by moving the call to
> serial_core_add_one_port() to happen after the devices are created.
Can you give a try with the patch below and see if it works for you?
Regards,
Tony
8< --------------------
diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -995,6 +995,7 @@ int serial8250_register_8250_port(const struct uart_8250_port *up)
if (uart->port.dev)
uart_remove_one_port(&serial8250_reg, &uart->port);
+ uart->port.ctrl_id = up->port.ctrl_id;
uart->port.iobase = up->port.iobase;
uart->port.membase = up->port.membase;
uart->port.irq = up->port.irq;
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -3,7 +3,7 @@
# Makefile for the kernel serial device drivers.
#
-obj-$(CONFIG_SERIAL_CORE) += serial_core.o
+obj-$(CONFIG_SERIAL_CORE) += serial_core.o serial_ctrl.o serial_port.o
obj-$(CONFIG_SERIAL_EARLYCON) += earlycon.o
obj-$(CONFIG_SERIAL_EARLYCON_ARM_SEMIHOST) += earlycon-arm-semihost.o
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -16,6 +16,8 @@
#include <linux/console.h>
#include <linux/gpio/consumer.h>
#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
#include <linux/device.h>
@@ -30,6 +32,8 @@
#include <linux/irq.h>
#include <linux/uaccess.h>
+#include "serial_ctrl.h"
+
/*
* This is used to lock changes in serial line configuration.
*/
@@ -136,9 +140,31 @@ static void __uart_start(struct tty_struct *tty)
{
struct uart_state *state = tty->driver_data;
struct uart_port *port = state->uart_port;
+ struct device *port_dev;
+ int err;
+
+ if (!port || uart_tx_stopped(port))
+ return;
- if (port && !uart_tx_stopped(port))
+ port_dev = port->port_dev;
+
+ err = pm_runtime_get(port_dev);
+ if (err < 0) {
+ /* Something went wrong, attempt to start TX anyways */
port->ops->start_tx(port);
+ pm_runtime_put_noidle(port_dev);
+ return;
+ }
+
+ /*
+ * Start TX if enabled, and kick runtime PM. Otherwise we must
+ * wait for a retry. See also serial_port.c for runtime PM
+ * autosuspend timeout.
+ */
+ if (pm_runtime_active(port_dev))
+ port->ops->start_tx(port);
+ pm_runtime_mark_last_busy(port_dev);
+ pm_runtime_put_autosuspend(port_dev);
}
static void uart_start(struct tty_struct *tty)
@@ -3035,7 +3061,7 @@ static const struct attribute_group tty_dev_attr_group = {
};
/**
- * uart_add_one_port - attach a driver-defined port structure
+ * serial_core_add_one_port - attach a driver-defined port structure
* @drv: pointer to the uart low level driver structure for this port
* @uport: uart port structure to use for this port.
*
@@ -3045,7 +3071,7 @@ static const struct attribute_group tty_dev_attr_group = {
* core driver. The main purpose is to allow the low level uart drivers to
* expand uart_port, rather than having yet more levels of structures.
*/
-int uart_add_one_port(struct uart_driver *drv, struct uart_port *uport)
+static int serial_core_add_one_port(struct uart_driver *drv, struct uart_port *uport)
{
struct uart_state *state;
struct tty_port *port;
@@ -3135,10 +3161,9 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *uport)
return ret;
}
-EXPORT_SYMBOL(uart_add_one_port);
/**
- * uart_remove_one_port - detach a driver defined port structure
+ * serial_core_remove_one_port - detach a driver defined port structure
* @drv: pointer to the uart low level driver structure for this port
* @uport: uart port structure for this port
*
@@ -3147,7 +3172,8 @@ EXPORT_SYMBOL(uart_add_one_port);
* This unhooks (and hangs up) the specified port structure from the core
* driver. No further calls will be made to the low-level code for this port.
*/
-int uart_remove_one_port(struct uart_driver *drv, struct uart_port *uport)
+static int serial_core_remove_one_port(struct uart_driver *drv,
+ struct uart_port *uport)
{
struct uart_state *state = drv->state + uport->line;
struct tty_port *port = &state->port;
@@ -3204,6 +3230,8 @@ int uart_remove_one_port(struct uart_driver *drv, struct uart_port *uport)
* Indicate that there isn't a port here anymore.
*/
uport->type = PORT_UNKNOWN;
+ uport->port_dev = NULL;
+ uport->ctrl_id = -ENODEV;
mutex_lock(&port->mutex);
WARN_ON(atomic_dec_return(&state->refcount) < 0);
@@ -3215,7 +3243,6 @@ int uart_remove_one_port(struct uart_driver *drv, struct uart_port *uport)
return ret;
}
-EXPORT_SYMBOL(uart_remove_one_port);
/**
* uart_match_port - are the two ports equivalent?
@@ -3250,6 +3277,154 @@ bool uart_match_port(const struct uart_port *port1,
}
EXPORT_SYMBOL(uart_match_port);
+/*
+ * Find a registered serial core controller device if one exists. Returns
+ * the first device matching the ctrl_id. Caller must hold port_mutex.
+ */
+static struct device *serial_core_ctrl_find(struct uart_driver *drv,
+ struct device *phys_dev,
+ int ctrl_id)
+{
+ struct uart_state *state;
+ int i;
+
+ if (ctrl_id < 0)
+ return NULL;
+
+ lockdep_assert_held(&port_mutex);
+
+ for (i = 0; i < drv->nr; i++) {
+ state = drv->state + i;
+ if (!state->uart_port || !state->uart_port->port_dev)
+ continue;
+
+ if (state->uart_port->dev == phys_dev &&
+ state->uart_port->ctrl_id == ctrl_id)
+ return state->uart_port->port_dev->parent;
+ }
+
+ return NULL;
+}
+
+static struct platform_device *serial_core_device_add(struct uart_port *port,
+ const char *name,
+ struct device *parent_dev,
+ void *pdata,
+ int pdata_size)
+{
+ struct platform_device_info pinfo = {};
+
+ pinfo.name = name;
+ pinfo.id = PLATFORM_DEVID_AUTO;
+ pinfo.parent = parent_dev;
+ pinfo.data = pdata;
+ pinfo.size_data = pdata_size;
+
+ return platform_device_register_full(&pinfo);
+}
+
+static struct device *serial_core_ctrl_device_add(struct uart_port *port)
+{
+ struct platform_device *pdev;
+
+ pdev = serial_core_device_add(port, "serial-ctrl", port->dev, NULL, 0);
+ if (IS_ERR(pdev))
+ return NULL;
+
+ return &pdev->dev;
+}
+
+static int serial_core_port_device_add(struct device *ctrl_dev, struct uart_port *port)
+{
+ struct serial_port_platdata pdata = {};
+ struct platform_device *pdev;
+
+ pdata.port = port;
+
+ pdev = serial_core_device_add(port, "serial-port", ctrl_dev, &pdata,
+ sizeof(pdata));
+ if (IS_ERR(pdev))
+ return PTR_ERR(pdev);
+
+ port->port_dev = &pdev->dev;
+
+ return 0;
+}
+
+/*
+ * Initialize a serial core port device, and a controller device if needed.
+ */
+int serial_core_register_port(struct uart_driver *drv, struct uart_port *port)
+{
+ struct platform_device *ctrl_pdev = NULL;
+ struct device *ctrl_dev;
+ int ret;
+
+ mutex_lock(&port_mutex);
+
+ /* Inititalize a serial core controller device if needed */
+ ctrl_dev = serial_core_ctrl_find(drv, port->dev, port->ctrl_id);
+ if (!ctrl_dev) {
+ ctrl_dev = serial_core_ctrl_device_add(port);
+ if (!ctrl_dev) {
+ ret = -ENODEV;
+ goto err_unlock;
+ }
+ ctrl_pdev = to_platform_device(ctrl_dev);
+ }
+
+ /* Initialize a serial core port device */
+ ret = serial_core_port_device_add(ctrl_dev, port);
+ if (ret)
+ goto err_unregister_ctrl_dev;
+
+ mutex_unlock(&port_mutex);
+
+ ret = serial_core_add_one_port(drv, port);
+ if (ret)
+ goto err_unregister_port_dev;
+
+ return 0;
+
+err_unregister_port_dev:
+ mutex_lock(&port_mutex);
+ platform_device_unregister(to_platform_device(port->port_dev));
+
+err_unregister_ctrl_dev:
+ platform_device_unregister(ctrl_pdev);
+
+err_unlock:
+ mutex_unlock(&port_mutex);
+
+ return ret;
+}
+EXPORT_SYMBOL_NS(serial_core_register_port, SERIAL_CORE);
+
+/*
+ * Removes a serial core port device, and the related serial core controller
+ * device if the last instance.
+ */
+void serial_core_unregister_port(struct uart_driver *drv, struct uart_port *port)
+{
+ struct device *phys_dev = port->dev;
+ struct device *port_dev = port->port_dev;
+ struct device *ctrl_dev = port_dev->parent;
+ int ctrl_id = port->ctrl_id;
+
+ serial_core_remove_one_port(drv, port);
+
+ mutex_lock(&port_mutex);
+
+ platform_device_unregister(to_platform_device(port_dev));
+
+ /* Drop the serial core controller device if no ports are using it */
+ if (!serial_core_ctrl_find(drv, phys_dev, ctrl_id))
+ platform_device_unregister(to_platform_device(ctrl_dev));
+
+ mutex_unlock(&port_mutex);
+}
+EXPORT_SYMBOL_NS(serial_core_unregister_port, SERIAL_CORE);
+
/**
* uart_handle_dcd_change - handle a change of carrier detect state
* @uport: uart_port structure for the open port
diff --git a/drivers/tty/serial/serial_ctrl.c b/drivers/tty/serial/serial_ctrl.c
new file mode 100644
--- /dev/null
+++ b/drivers/tty/serial/serial_ctrl.c
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+/*
+ * Serial core controller driver
+ *
+ * This driver manages the serial core controller struct device instances.
+ * The serial core controller devices are children of the physical serial
+ * port device.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/serial_core.h>
+
+#include "serial_ctrl.h"
+
+static int serial_ctrl_probe(struct platform_device *pdev)
+{
+ pm_runtime_enable(&pdev->dev);
+
+ return 0;
+}
+
+static int serial_ctrl_remove(struct platform_device *pdev)
+{
+ pm_runtime_disable(&pdev->dev);
+
+ return 0;
+}
+
+static struct platform_driver serial_ctrl_driver = {
+ .driver = {
+ .name = "serial-ctrl",
+ .suppress_bind_attrs = true,
+ },
+ .probe = serial_ctrl_probe,
+ .remove = serial_ctrl_remove,
+};
+module_platform_driver(serial_ctrl_driver);
+
+/*
+ * Serial core controller device init functions. Note that the physical
+ * serial port device driver may not have completed probe at this point.
+ */
+int serial_ctrl_register_port(struct uart_driver *drv, struct uart_port *port)
+{
+ return serial_core_register_port(drv, port);
+}
+EXPORT_SYMBOL_NS(serial_ctrl_register_port, SERIAL_CORE);
+
+void serial_ctrl_unregister_port(struct uart_driver *drv, struct uart_port *port)
+{
+ serial_core_unregister_port(drv, port);
+}
+EXPORT_SYMBOL_NS(serial_ctrl_unregister_port, SERIAL_CORE);
+
+MODULE_AUTHOR("Tony Lindgren <tony@atomide.com>");
+MODULE_DESCRIPTION("Serial core controller driver");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(SERIAL_CORE);
diff --git a/drivers/tty/serial/serial_ctrl.h b/drivers/tty/serial/serial_ctrl.h
new file mode 100644
--- /dev/null
+++ b/drivers/tty/serial/serial_ctrl.h
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
+/* Serial core controller data. Serial port device drivers do not need this. */
+
+struct uart_driver;
+struct uart_port;
+
+/**
+ * struct serial_port_platdata - Serial port platform data
+ * @state: serial port state
+ *
+ * Used by serial_core and serial_port only. Allocated on uart_add_one_port(),
+ * and freed on uart_remove_one_port().
+ */
+struct serial_port_platdata {
+ struct uart_port *port;
+};
+
+extern int serial_ctrl_register_port(struct uart_driver *drv, struct uart_port *port);
+extern void serial_ctrl_unregister_port(struct uart_driver *drv, struct uart_port *port);
+extern int serial_core_register_port(struct uart_driver *drv, struct uart_port *port);
+extern void serial_core_unregister_port(struct uart_driver *drv, struct uart_port *port);
diff --git a/drivers/tty/serial/serial_port.c b/drivers/tty/serial/serial_port.c
new file mode 100644
--- /dev/null
+++ b/drivers/tty/serial/serial_port.c
@@ -0,0 +1,109 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+/*
+ * Serial core port device driver
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/serial_core.h>
+
+#include "serial_ctrl.h"
+
+#define SERIAL_PORT_AUTOSUSPEND_DELAY_MS 500
+
+struct serial_port_data {
+ struct uart_port *port;
+};
+
+/* Only considers pending TX for now. Caller must take care of locking */
+static int __serial_port_busy(struct uart_port *port)
+{
+ return !uart_tx_stopped(port) &&
+ uart_circ_chars_pending(&port->state->xmit);
+}
+
+static int serial_port_runtime_resume(struct device *dev)
+{
+ struct serial_port_data *ddata = dev_get_drvdata(dev);
+ struct uart_port *port = ddata->port;
+ unsigned long flags;
+
+ /* Flush any pending TX for the port */
+ spin_lock_irqsave(&port->lock, flags);
+ if (__serial_port_busy(port))
+ port->ops->start_tx(port);
+ spin_unlock_irqrestore(&port->lock, flags);
+ pm_runtime_mark_last_busy(dev);
+
+ return 0;
+}
+
+static DEFINE_RUNTIME_DEV_PM_OPS(serial_port_pm, NULL,
+ serial_port_runtime_resume,
+ NULL);
+
+static int serial_port_probe(struct platform_device *pdev)
+{
+ struct serial_port_platdata *pd = dev_get_platdata(&pdev->dev);
+ struct device *dev = &pdev->dev;
+ struct serial_port_data *ddata;
+
+ ddata = devm_kzalloc(dev, sizeof(*ddata), GFP_KERNEL);
+ if (!ddata)
+ return -ENOMEM;
+
+ ddata->port = pd->port;
+ platform_set_drvdata(pdev, ddata);
+
+ pm_runtime_enable(dev);
+ pm_runtime_set_autosuspend_delay(dev, SERIAL_PORT_AUTOSUSPEND_DELAY_MS);
+ pm_runtime_use_autosuspend(dev);
+
+ return 0;
+}
+
+static int serial_port_remove(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+
+ pm_runtime_dont_use_autosuspend(dev);
+ pm_runtime_disable(dev);
+
+ return 0;
+}
+
+static struct platform_driver serial_port_driver = {
+ .driver = {
+ .name = "serial-port",
+ .suppress_bind_attrs = true,
+ .pm = pm_ptr(&serial_port_pm),
+ },
+ .probe = serial_port_probe,
+ .remove = serial_port_remove,
+};
+module_platform_driver(serial_port_driver);
+
+/*
+ * Serial core port device init functions. Note that the physical serial
+ * port device driver may not have completed probe at this point.
+ */
+int uart_add_one_port(struct uart_driver *drv, struct uart_port *port)
+{
+ return serial_ctrl_register_port(drv, port);
+}
+EXPORT_SYMBOL(uart_add_one_port);
+
+int uart_remove_one_port(struct uart_driver *drv, struct uart_port *port)
+{
+ serial_ctrl_unregister_port(drv, port);
+
+ return 0;
+}
+EXPORT_SYMBOL(uart_remove_one_port);
+
+MODULE_AUTHOR("Tony Lindgren <tony@atomide.com>");
+MODULE_DESCRIPTION("Serial controller port driver");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(SERIAL_CORE);
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -458,6 +458,7 @@ struct uart_port {
struct serial_rs485 *rs485);
int (*iso7816_config)(struct uart_port *,
struct serial_iso7816 *iso7816);
+ int ctrl_id; /* optional serial core controller id */
unsigned int irq; /* irq number */
unsigned long irqflags; /* irq flags */
unsigned int uartclk; /* base uart clock */
@@ -563,7 +564,8 @@ struct uart_port {
unsigned int minor;
resource_size_t mapbase; /* for ioremap */
resource_size_t mapsize;
- struct device *dev; /* parent device */
+ struct device *dev; /* serial port physical parent device */
+ struct device *port_dev; /* serial core port device */
unsigned long sysrq; /* sysrq timeout */
unsigned int sysrq_ch; /* char for sysrq */
On Mon, 12 Dec 2022, Tony Lindgren wrote:
> Hi Ilpo,
>
> * Tony Lindgren <tony@atomide.com> [221208 11:13]:
> > * Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> [221208 10:48]:
> > > With the other patch on top of this, yes, I did see uninitialized
> > > port->port_dev already in serial_core_add_one_port()->uart_configure_port().
> > > While that could be solved by removing the pm_runtime_*() calls from
> > > there, I think it's a generic problem because after
> > > serial_core_add_one_port() the port can have anything happening on it, no?
> >
> > OK. Sounds like it should get sorted out by moving the call to
> > serial_core_add_one_port() to happen after the devices are created.
>
> Can you give a try with the patch below and see if it works for you?
This one worked, yes.
* Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> [221212 12:49]:
> On Mon, 12 Dec 2022, Tony Lindgren wrote:
>
> > Hi Ilpo,
> >
> > * Tony Lindgren <tony@atomide.com> [221208 11:13]:
> > > * Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> [221208 10:48]:
> > > > With the other patch on top of this, yes, I did see uninitialized
> > > > port->port_dev already in serial_core_add_one_port()->uart_configure_port().
> > > > While that could be solved by removing the pm_runtime_*() calls from
> > > > there, I think it's a generic problem because after
> > > > serial_core_add_one_port() the port can have anything happening on it, no?
> > >
> > > OK. Sounds like it should get sorted out by moving the call to
> > > serial_core_add_one_port() to happen after the devices are created.
> >
> > Can you give a try with the patch below and see if it works for you?
>
> This one worked, yes.
OK good to hear. I'll send out v5 after -rc1 then.
Thanks,
Tony
@@ -995,6 +995,7 @@ int serial8250_register_8250_port(const struct uart_8250_port *up)
if (uart->port.dev)
uart_remove_one_port(&serial8250_reg, &uart->port);
+ uart->port.ctrl_id = up->port.ctrl_id;
uart->port.iobase = up->port.iobase;
uart->port.membase = up->port.membase;
uart->port.irq = up->port.irq;
@@ -3,7 +3,7 @@
# Makefile for the kernel serial device drivers.
#
-obj-$(CONFIG_SERIAL_CORE) += serial_core.o
+obj-$(CONFIG_SERIAL_CORE) += serial_core.o serial_ctrl.o serial_port.o
obj-$(CONFIG_SERIAL_EARLYCON) += earlycon.o
obj-$(CONFIG_SERIAL_EARLYCON_ARM_SEMIHOST) += earlycon-arm-semihost.o
@@ -16,6 +16,8 @@
#include <linux/console.h>
#include <linux/gpio/consumer.h>
#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
#include <linux/device.h>
@@ -30,6 +32,8 @@
#include <linux/irq.h>
#include <linux/uaccess.h>
+#include "serial_ctrl.h"
+
/*
* This is used to lock changes in serial line configuration.
*/
@@ -136,9 +140,31 @@ static void __uart_start(struct tty_struct *tty)
{
struct uart_state *state = tty->driver_data;
struct uart_port *port = state->uart_port;
+ struct device *port_dev;
+ int err;
+
+ if (!port || uart_tx_stopped(port))
+ return;
- if (port && !uart_tx_stopped(port))
+ port_dev = port->port_dev;
+
+ err = pm_runtime_get(port_dev);
+ if (err < 0) {
+ /* Something went wrong, attempt to start TX anyways */
port->ops->start_tx(port);
+ pm_runtime_put_noidle(port_dev);
+ return;
+ }
+
+ /*
+ * Start TX if enabled, and kick runtime PM. Otherwise we must
+ * wait for a retry. See also serial_port.c for runtime PM
+ * autosuspend timeout.
+ */
+ if (pm_runtime_active(port_dev))
+ port->ops->start_tx(port);
+ pm_runtime_mark_last_busy(port_dev);
+ pm_runtime_put_autosuspend(port_dev);
}
static void uart_start(struct tty_struct *tty)
@@ -3035,7 +3061,7 @@ static const struct attribute_group tty_dev_attr_group = {
};
/**
- * uart_add_one_port - attach a driver-defined port structure
+ * serial_core_add_one_port - attach a driver-defined port structure
* @drv: pointer to the uart low level driver structure for this port
* @uport: uart port structure to use for this port.
*
@@ -3045,7 +3071,7 @@ static const struct attribute_group tty_dev_attr_group = {
* core driver. The main purpose is to allow the low level uart drivers to
* expand uart_port, rather than having yet more levels of structures.
*/
-int uart_add_one_port(struct uart_driver *drv, struct uart_port *uport)
+static int serial_core_add_one_port(struct uart_driver *drv, struct uart_port *uport)
{
struct uart_state *state;
struct tty_port *port;
@@ -3135,10 +3161,9 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *uport)
return ret;
}
-EXPORT_SYMBOL(uart_add_one_port);
/**
- * uart_remove_one_port - detach a driver defined port structure
+ * serial_core_remove_one_port - detach a driver defined port structure
* @drv: pointer to the uart low level driver structure for this port
* @uport: uart port structure for this port
*
@@ -3147,7 +3172,8 @@ EXPORT_SYMBOL(uart_add_one_port);
* This unhooks (and hangs up) the specified port structure from the core
* driver. No further calls will be made to the low-level code for this port.
*/
-int uart_remove_one_port(struct uart_driver *drv, struct uart_port *uport)
+static int serial_core_remove_one_port(struct uart_driver *drv,
+ struct uart_port *uport)
{
struct uart_state *state = drv->state + uport->line;
struct tty_port *port = &state->port;
@@ -3215,7 +3241,6 @@ int uart_remove_one_port(struct uart_driver *drv, struct uart_port *uport)
return ret;
}
-EXPORT_SYMBOL(uart_remove_one_port);
/**
* uart_match_port - are the two ports equivalent?
@@ -3250,6 +3275,151 @@ bool uart_match_port(const struct uart_port *port1,
}
EXPORT_SYMBOL(uart_match_port);
+/*
+ * Find a registered serial core controller device if one exists. Returns
+ * the first device matching the ctrl_id. Caller must hold port_mutex.
+ */
+static struct device *serial_core_ctrl_find(struct uart_driver *drv,
+ struct device *phys_dev,
+ int ctrl_id)
+{
+ struct uart_state *state;
+ int i;
+
+ lockdep_assert_held(&port_mutex);
+
+ for (i = 0; i < drv->nr; i++) {
+ state = drv->state + i;
+ if (!state->uart_port || !state->uart_port->port_dev)
+ continue;
+
+ if (state->uart_port->dev == phys_dev &&
+ state->uart_port->ctrl_id == ctrl_id)
+ return state->uart_port->port_dev->parent;
+ }
+
+ return NULL;
+}
+
+static struct platform_device *serial_core_device_add(struct uart_port *port,
+ const char *name,
+ struct device *parent_dev,
+ void *pdata,
+ int pdata_size)
+{
+ struct platform_device_info pinfo;
+
+ memset(&pinfo, 0, sizeof(pinfo));
+ pinfo.name = name;
+ pinfo.id = PLATFORM_DEVID_AUTO;
+ pinfo.parent = parent_dev;
+ pinfo.data = pdata;
+ pinfo.size_data = pdata_size;
+
+ return platform_device_register_full(&pinfo);
+}
+
+static struct device *serial_core_ctrl_device_add(struct uart_port *port)
+{
+ struct platform_device *pdev;
+
+ pdev = serial_core_device_add(port, "serial-ctrl", port->dev, NULL, 0);
+ if (IS_ERR(pdev))
+ return NULL;
+
+ return &pdev->dev;
+}
+
+static int serial_core_port_device_add(struct device *ctrl_dev, struct uart_port *port)
+{
+ struct serial_port_platdata pdata;
+ struct platform_device *pdev;
+
+ memset(&pdata, 0, sizeof(pdata));
+ pdata.port = port;
+
+ pdev = serial_core_device_add(port, "serial-port", ctrl_dev, &pdata,
+ sizeof(pdata));
+ if (IS_ERR(pdev))
+ return PTR_ERR(pdev);
+
+ port->port_dev = &pdev->dev;
+
+ return 0;
+}
+
+/*
+ * Initialize a serial core port device, and a controller device if needed.
+ */
+int serial_core_register_port(struct uart_driver *drv, struct uart_port *port)
+{
+ bool allocated = false;
+ struct device *ctrl_dev;
+ int ret;
+
+ ret = serial_core_add_one_port(drv, port);
+ if (ret)
+ return ret;
+
+ mutex_lock(&port_mutex);
+
+ /* Inititalize a serial core controller device if needed */
+ ctrl_dev = serial_core_ctrl_find(drv, port->dev, port->ctrl_id);
+ if (!ctrl_dev) {
+ ctrl_dev = serial_core_ctrl_device_add(port);
+ if (!ctrl_dev)
+ goto err_remove_port;
+ allocated = true;
+ }
+
+ /* Initialize a serial core port device */
+ ret = serial_core_port_device_add(ctrl_dev, port);
+ if (ret)
+ goto err_del_ctrl_dev;
+
+ mutex_unlock(&port_mutex);
+
+ return 0;
+
+err_del_ctrl_dev:
+ if (allocated)
+ platform_device_del(to_platform_device(ctrl_dev));
+
+err_remove_port:
+ mutex_unlock(&port_mutex);
+
+ return serial_core_remove_one_port(drv, port);
+}
+EXPORT_SYMBOL_NS(serial_core_register_port, SERIAL_CORE);
+
+/*
+ * Removes a serial core port device, and the related serial core controller
+ * device if the last instance.
+ */
+void serial_core_unregister_port(struct uart_driver *drv, struct uart_port *port)
+{
+ struct device *port_dev = port->port_dev;
+ struct device *ctrl_dev = port_dev->parent;
+
+ mutex_lock(&port_mutex);
+
+ platform_device_del(to_platform_device(port_dev));
+ port->port_dev = NULL;
+
+ mutex_unlock(&port_mutex);
+
+ serial_core_remove_one_port(drv, port);
+
+ mutex_lock(&port_mutex);
+
+ /* Drop the serial core controller device if no ports are using it */
+ if (!serial_core_ctrl_find(drv, port->dev, port->ctrl_id))
+ platform_device_del(to_platform_device(ctrl_dev));
+
+ mutex_unlock(&port_mutex);
+}
+EXPORT_SYMBOL_NS(serial_core_unregister_port, SERIAL_CORE);
+
/**
* uart_handle_dcd_change - handle a change of carrier detect state
* @uport: uart_port structure for the open port
new file mode 100644
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+/*
+ * Serial core controller driver
+ *
+ * This driver manages the serial core controller struct device instances.
+ * The serial core controller devices are children of the physical serial
+ * port device.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/serial_core.h>
+
+#include "serial_ctrl.h"
+
+static int serial_ctrl_probe(struct platform_device *pdev)
+{
+ pm_runtime_enable(&pdev->dev);
+
+ return 0;
+}
+
+static int serial_ctrl_remove(struct platform_device *pdev)
+{
+ pm_runtime_disable(&pdev->dev);
+
+ return 0;
+}
+
+static struct platform_driver serial_ctrl_driver = {
+ .driver = {
+ .name = "serial-ctrl",
+ .suppress_bind_attrs = true,
+ },
+ .probe = serial_ctrl_probe,
+ .remove = serial_ctrl_remove,
+};
+module_platform_driver(serial_ctrl_driver);
+
+/*
+ * Serial core controller device init functions. Note that the physical
+ * serial port device driver may not have completed probe at this point.
+ */
+int serial_ctrl_register_port(struct uart_driver *drv, struct uart_port *port)
+{
+ return serial_core_register_port(drv, port);
+}
+EXPORT_SYMBOL_NS(serial_ctrl_register_port, SERIAL_CORE);
+
+void serial_ctrl_unregister_port(struct uart_driver *drv, struct uart_port *port)
+{
+ serial_core_unregister_port(drv, port);
+}
+EXPORT_SYMBOL_NS(serial_ctrl_unregister_port, SERIAL_CORE);
+
+MODULE_AUTHOR("Tony Lindgren <tony@atomide.com>");
+MODULE_DESCRIPTION("Serial core controller driver");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(SERIAL_CORE);
new file mode 100644
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
+/* Serial core controller data. Serial port device drivers do not need this. */
+
+/**
+ * struct serial_port_platdata - Serial port platform data
+ * @state: serial port state
+ *
+ * Used by serial_core and serial_port only. Allocated on uart_add_one_port(),
+ * and freed on uart_remove_one_port().
+ */
+struct serial_port_platdata {
+ struct uart_port *port;
+};
+
+extern int serial_ctrl_register_port(struct uart_driver *drv, struct uart_port *port);
+extern void serial_ctrl_unregister_port(struct uart_driver *drv, struct uart_port *port);
+extern int serial_core_register_port(struct uart_driver *drv, struct uart_port *port);
+extern void serial_core_unregister_port(struct uart_driver *drv, struct uart_port *port);
new file mode 100644
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+/*
+ * Serial core port device driver
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/serial_core.h>
+
+#include "serial_ctrl.h"
+
+#define SERIAL_PORT_AUTOSUSPEND_DELAY_MS 500
+
+struct serial_port_data {
+ struct uart_port *port;
+};
+
+/* Only considers pending TX for now. Caller must take care of locking */
+static int __serial_port_busy(struct uart_port *port)
+{
+ return !uart_tx_stopped(port) &&
+ uart_circ_chars_pending(&port->state->xmit);
+}
+
+static int serial_port_runtime_resume(struct device *dev)
+{
+ struct serial_port_data *ddata = dev_get_drvdata(dev);
+ struct uart_port *port = ddata->port;
+ unsigned long flags;
+
+ /* Flush any pending TX for the port */
+ spin_lock_irqsave(&port->lock, flags);
+ if (__serial_port_busy(port))
+ port->ops->start_tx(port);
+ spin_unlock_irqrestore(&port->lock, flags);
+ pm_runtime_mark_last_busy(dev);
+
+ return 0;
+}
+
+static DEFINE_RUNTIME_DEV_PM_OPS(serial_port_pm, NULL,
+ serial_port_runtime_resume, NULL);
+
+static int serial_port_probe(struct platform_device *pdev)
+{
+ struct serial_port_platdata *pd = dev_get_platdata(&pdev->dev);
+ struct device *dev = &pdev->dev;
+ struct serial_port_data *ddata;
+
+ ddata = devm_kzalloc(dev, sizeof(*ddata), GFP_KERNEL);
+ if (!ddata)
+ return -ENOMEM;
+
+ ddata->port = pd->port;
+ platform_set_drvdata(pdev, ddata);
+
+ pm_runtime_enable(dev);
+ pm_runtime_set_autosuspend_delay(dev, SERIAL_PORT_AUTOSUSPEND_DELAY_MS);
+ pm_runtime_use_autosuspend(dev);
+
+ return 0;
+}
+
+static int serial_port_remove(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+
+ pm_runtime_dont_use_autosuspend(dev);
+ pm_runtime_disable(dev);
+
+ return 0;
+}
+
+static struct platform_driver serial_port_driver = {
+ .driver = {
+ .name = "serial-port",
+ .suppress_bind_attrs = true,
+ .pm = pm_ptr(&serial_port_pm),
+ },
+ .probe = serial_port_probe,
+ .remove = serial_port_remove,
+};
+module_platform_driver(serial_port_driver);
+
+/*
+ * Serial core port device init functions. Note that the physical serial
+ * port device driver may not have completed probe at this point.
+ */
+int uart_add_one_port(struct uart_driver *drv, struct uart_port *port)
+{
+ return serial_ctrl_register_port(drv, port);
+}
+EXPORT_SYMBOL(uart_add_one_port);
+
+int uart_remove_one_port(struct uart_driver *drv, struct uart_port *port)
+{
+ serial_ctrl_unregister_port(drv, port);
+
+ return 0;
+}
+EXPORT_SYMBOL(uart_remove_one_port);
+
+MODULE_AUTHOR("Tony Lindgren <tony@atomide.com>");
+MODULE_DESCRIPTION("Serial controller port driver");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(SERIAL_CORE);
@@ -458,6 +458,7 @@ struct uart_port {
struct serial_rs485 *rs485);
int (*iso7816_config)(struct uart_port *,
struct serial_iso7816 *iso7816);
+ int ctrl_id; /* optional serial core controller id */
unsigned int irq; /* irq number */
unsigned long irqflags; /* irq flags */
unsigned int uartclk; /* base uart clock */
@@ -563,7 +564,8 @@ struct uart_port {
unsigned int minor;
resource_size_t mapbase; /* for ioremap */
resource_size_t mapsize;
- struct device *dev; /* parent device */
+ struct device *dev; /* serial port physical parent device */
+ struct device *port_dev; /* serial core port device */
unsigned long sysrq; /* sysrq timeout */
unsigned int sysrq_ch; /* char for sysrq */