[2/2] arm64: dts: rockchip: Add Radxa ROCK Pi E25

  Radxa ROCK Pi E25 is a Rockchip RK3568 SBC, which is
based on the Radxa ROCK Pi CM3 IO core board.

It has the following features:

- MicroSD card socket, on board eMMC flash
- 2x 2.5GbE Realtek RTL8125B Ethernet transceiver
- 1x USB Type-C port (Power and Serial console)
- 1x USB 3.0 OTG port
- mini PCIe socket (USB or PCIe)
- ngff PCIe socket [USB (or SATA, not tested)]
- 1x User LED and 16x RGB LEDs
- 26-pin expansion header

Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
---
 arch/arm64/boot/dts/rockchip/Makefile         |   1 +
 .../boot/dts/rockchip/rk3568-rock-pi-e25.dts  | 623 ++++++++++++++++++
 2 files changed, 624 insertions(+)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3568-rock-pi-e25.dts
  

Hi,

> Radxa ROCK Pi E25 is a Rockchip RK3568 SBC, which is

there is no product called "ROCK Pi E25". it's "Radxa E25".
 https://wiki.radxa.com/Rock3/CM/CM3I/E25

> based on the Radxa ROCK Pi CM3 IO core board.

there is no product called "Radxa ROCK Pi CM3 IO (core board)". it's
"Radxa ROCK 3 Compute Module Industrial". (A.K.A. Radxa CM3I)
 https://wiki.radxa.com/Rock3/CM/CM3I

> It has the following features:
> 
> - MicroSD card socket, on board eMMC flash
> - 2x 2.5GbE Realtek RTL8125B Ethernet transceiver
> - 1x USB Type-C port (Power and Serial console)
> - 1x USB 3.0 OTG port
> - mini PCIe socket (USB or PCIe)
> - ngff PCIe socket [USB (or SATA, not tested)]

SATA is working on my E25. you may refer my dts,
 https://github.com/RadxaNaoki/linux/commits/rock-3

> - 1x User LED and 16x RGB LEDs
> - 26-pin expansion header
> 
> Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
> ---
>  arch/arm64/boot/dts/rockchip/Makefile         |   1 +
>  .../boot/dts/rockchip/rk3568-rock-pi-e25.dts  | 623 ++++++++++++++++++
>  2 files changed, 624 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/rockchip/rk3568-rock-pi-e25.dts

I think dts should be separated, CM3I dtsi and E25 dts.

> diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
> index 0a76a2ebb5f6..dbf72f482636 100644
> --- a/arch/arm64/boot/dts/rockchip/Makefile
> +++ b/arch/arm64/boot/dts/rockchip/Makefile
> @@ -82,3 +82,4 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bpi-r2-pro.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-odroid-m1.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3a.dtb
> +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-pi-e25.dtb
> diff --git a/arch/arm64/boot/dts/rockchip/rk3568-rock-pi-e25.dts b/arch/arm64/boot/dts/rockchip/rk3568-rock-pi-e25.dts
> new file mode 100644
> index 000000000000..f75a9cf48e02
> --- /dev/null
> +++ b/arch/arm64/boot/dts/rockchip/rk3568-rock-pi-e25.dts
> @@ -0,0 +1,623 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +
> +/dts-v1/;
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/leds/common.h>
> +#include <dt-bindings/pinctrl/rockchip.h>
> +#include "rk3568.dtsi"
> +
> +/ {
> +	model = "Radxa ROCK Pi E25";
> +	compatible = "radxa,rockpi-e25", "rockchip,rk3568";
> +
> +	aliases {
> +		mmc0 = &sdmmc0;
> +		mmc1 = &sdhci;
> +	};
> +
> +	chosen: chosen {
> +		stdout-path = "serial2:1500000n8";
> +	};

vendor u-boot/kernel use 115200bps to avoid character loss.
 https://github.com/radxa/u-boot/commit/ef9f6b1caadf81afe77a5d548c375ad7c9152ead
 https://github.com/radxa/kernel/commit/f62b47f7009636336f11fbbb88eaeef8a294f701

> +	leds {
> +		compatible = "gpio-leds";
> +
> +		led_user: led-0 {
> +			gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
> +			function = LED_FUNCTION_HEARTBEAT;
> +			color = <LED_COLOR_ID_GREEN>;
> +			linux,default-trigger = "heartbeat";
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&led_user_en>;
> +		};
> +	};
> +
> +	pwm-leds {
> +		compatible = "pwm-leds-multicolor";
> +
> +		multi-led {
> +			color = <LED_COLOR_ID_RGB>;
> +			max-brightness = <255>;
> +
> +			led-red {
> +				color = <LED_COLOR_ID_RED>;
> +				pwms = <&pwm1 0 1000000 0>;
> +			};
> +
> +			led-green {
> +				color = <LED_COLOR_ID_GREEN>;
> +				pwms = <&pwm2 0 1000000 0>;
> +			};
> +
> +			led-blue {
> +				color = <LED_COLOR_ID_BLUE>;
> +				pwms = <&pwm12 0 1000000 0>;
> +			};
> +		};
> +	};
> +
> +	typec_5v: typec-5v-regulator {
> +		compatible = "regulator-fixed";
> +		regulator-name = "typec_5v";
> +		regulator-always-on;
> +		regulator-boot-on;
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +	};
> +
> +	pcie30_avdd0v9: pcie30-avdd0v9-regulator {
> +		compatible = "regulator-fixed";
> +		regulator-name = "pcie30_avdd0v9";
> +		regulator-always-on;
> +		regulator-boot-on;
> +		regulator-min-microvolt = <900000>;
> +		regulator-max-microvolt = <900000>;
> +		vin-supply = <&vcc3v3_sys>;
> +	};
> +
> +	pcie30_avdd1v8: pcie30-avdd1v8-regulator {
> +		compatible = "regulator-fixed";
> +		regulator-name = "pcie30_avdd1v8";
> +		regulator-always-on;
> +		regulator-boot-on;
> +		regulator-min-microvolt = <1800000>;
> +		regulator-max-microvolt = <1800000>;
> +		vin-supply = <&vcc3v3_sys>;
> +	};
> +
> +	/* actually fed by vcc5v0_sys, dependent
> +	 * on pi6c clock generator
> +	 */
> +	vcc3v3_pcie30x1: vcc3v3-pcie30x1-regulator {
> +		compatible = "regulator-fixed";
> +		enable-active-high;
> +		gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pcie30x1_enable_h>;
> +		regulator-name = "vcc3v3_pcie30x1";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		vin-supply = <&vcc3v3_pi6c_05>;
> +	};
> +
> +	vcc3v3_pi6c_05: vcc3v3-pi6c-05-regulator {
> +		compatible = "regulator-fixed";
> +		enable-active-high;
> +		gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pcie_enable_h>;
> +		regulator-name = "vcc3v3_pcie";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		vin-supply = <&vcc5v0_sys>;
> +	};
> +
> +	vcc3v3_minipcie: vcc3v3-minipcie-regulator {
> +		compatible = "regulator-fixed";
> +		enable-active-high;
> +		gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_HIGH>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&minipcie_enable_h>;
> +		regulator-name = "vcc3v3_minipcie";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		vin-supply = <&vcc5v0_sys>;
> +	};
> +
> +	vcc3v3_ngff: vcc3v3-ngff-regulator {
> +		compatible = "regulator-fixed";
> +		enable-active-high;
> +		gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_HIGH>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&ngffpcie_enable_h>;
> +		regulator-name = "vcc3v3_ngff";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		vin-supply = <&vcc5v0_sys>;
> +	};
> +
> +	vcc3v3_sys: vcc3v3-sys-regulator {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vcc3v3_sys";
> +		regulator-always-on;
> +		regulator-boot-on;
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		vin-supply = <&typec_5v>;
> +	};
> +
> +	vcc5v0_sys: vcc5v0-sys-regulator {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vcc5v0_sys";
> +		regulator-always-on;
> +		regulator-boot-on;
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		vin-supply = <&typec_5v>;
> +	};
> +
> +	vcc5v0_usb_otg: vcc5v0-usb-otg-regulator {
> +		compatible = "regulator-fixed";
> +		enable-active-high;
> +		gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&vcc5v0_usb_otg_en>;
> +		regulator-name = "vcc5v0_usb_otg";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		vin-supply = <&vcc5v0_sys>;
> +	};
> +};
> +
> +&combphy0 {
> +	status = "okay";
> +};
> +
> +&combphy2 {
> +	status = "okay";
> +};
> +
> +&cpu0 {
> +	cpu-supply = <&vdd_cpu>;
> +};
> +
> +&cpu1 {
> +	cpu-supply = <&vdd_cpu>;
> +};
> +
> +&cpu2 {
> +	cpu-supply = <&vdd_cpu>;
> +};
> +
> +&cpu3 {
> +	cpu-supply = <&vdd_cpu>;
> +};
> +
> +&display_subsystem {
> +	status = "disabled";
> +};
> +
> +&gpu {
> +	mali-supply = <&vdd_gpu>;
> +	status = "okay";
> +};
> +
> +&i2c0 {
> +	status = "okay";
> +
> +	vdd_cpu: regulator@1c {
> +		compatible = "tcs,tcs4525";
> +		reg = <0x1c>;
> +		fcs,suspend-voltage-selector = <1>;
> +		regulator-name = "vdd_cpu";
> +		regulator-always-on;
> +		regulator-boot-on;
> +		regulator-min-microvolt = <800000>;
> +		regulator-max-microvolt = <1150000>;
> +		regulator-ramp-delay = <2300>;
> +		vin-supply = <&vcc5v0_sys>;
> +
> +		regulator-state-mem {
> +			regulator-off-in-suspend;
> +		};
> +	};
> +
> +	rk809: pmic@20 {
> +		compatible = "rockchip,rk809";
> +		reg = <0x20>;
> +		interrupt-parent = <&gpio0>;
> +		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
> +		#clock-cells = <1>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pmic_int>;
> +		rockchip,system-power-controller;
> +		wakeup-source;
> +
> +		vcc1-supply = <&vcc3v3_sys>;
> +		vcc2-supply = <&vcc3v3_sys>;
> +		vcc3-supply = <&vcc3v3_sys>;
> +		vcc4-supply = <&vcc3v3_sys>;
> +		vcc5-supply = <&vcc3v3_sys>;
> +		vcc6-supply = <&vcc3v3_sys>;
> +		vcc7-supply = <&vcc3v3_sys>;
> +		vcc8-supply = <&vcc3v3_sys>;
> +		vcc9-supply = <&vcc3v3_sys>;
> +
> +		regulators {
> +			vdd_logic: DCDC_REG1 {
> +				regulator-name = "vdd_logic";
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-init-microvolt = <900000>;
> +				regulator-initial-mode = <0x2>;
> +				regulator-min-microvolt = <500000>;
> +				regulator-max-microvolt = <1350000>;
> +				regulator-ramp-delay = <6001>;
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			vdd_gpu: DCDC_REG2 {
> +				regulator-name = "vdd_gpu";
> +				regulator-always-on;
> +				regulator-init-microvolt = <900000>;
> +				regulator-initial-mode = <0x2>;
> +				regulator-min-microvolt = <500000>;
> +				regulator-max-microvolt = <1350000>;
> +				regulator-ramp-delay = <6001>;
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			vcc_ddr: DCDC_REG3 {
> +				regulator-name = "vcc_ddr";
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-initial-mode = <0x2>;
> +
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +				};
> +			};
> +
> +			vdd_npu: DCDC_REG4 {
> +				regulator-name = "vdd_npu";
> +				regulator-init-microvolt = <900000>;
> +				regulator-initial-mode = <0x2>;
> +				regulator-min-microvolt = <500000>;
> +				regulator-max-microvolt = <1350000>;
> +				regulator-ramp-delay = <6001>;
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			vcc_1v8: DCDC_REG5 {
> +				regulator-name = "vcc_1v8";
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <1800000>;
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			vdda0v9_image: LDO_REG1 {
> +				regulator-name = "vdda0v9_image";
> +				regulator-min-microvolt = <900000>;
> +				regulator-max-microvolt = <900000>;
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			vdda_0v9: LDO_REG2 {
> +				regulator-name = "vdda_0v9";
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <900000>;
> +				regulator-max-microvolt = <900000>;
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			vdda0v9_pmu: LDO_REG3 {
> +				regulator-name = "vdda0v9_pmu";
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <900000>;
> +				regulator-max-microvolt = <900000>;
> +
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +					regulator-suspend-microvolt = <900000>;
> +				};
> +			};
> +
> +			vccio_acodec: LDO_REG4 {
> +				regulator-name = "vccio_acodec";
> +				regulator-always-on;
> +				regulator-min-microvolt = <3300000>;
> +				regulator-max-microvolt = <3300000>;
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			vccio_sd: LDO_REG5 {
> +				regulator-name = "vccio_sd";
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <3300000>;
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			vcc3v3_pmu: LDO_REG6 {
> +				regulator-name = "vcc3v3_pmu";
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <3300000>;
> +				regulator-max-microvolt = <3300000>;
> +
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +					regulator-suspend-microvolt = <3300000>;
> +				};
> +			};
> +
> +			vcca_1v8: LDO_REG7 {
> +				regulator-name = "vcca_1v8";
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <1800000>;
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			vcca1v8_pmu: LDO_REG8 {
> +				regulator-name = "vcca1v8_pmu";
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <1800000>;
> +
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +					regulator-suspend-microvolt = <1800000>;
> +				};
> +			};
> +
> +			vcca1v8_image: LDO_REG9 {
> +				regulator-name = "vcca1v8_image";
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <1800000>;
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			vcc_3v3: SWITCH_REG1 {
> +				regulator-name = "vcc_3v3";
> +				regulator-always-on;
> +				regulator-boot-on;
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			vcc3v3_sd: SWITCH_REG2 {
> +				regulator-name = "vcc3v3_sd";
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +		};
> +	};
> +};
> +
> +&pcie2x1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pcie20_reset_h>;
> +	reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>;
> +	vpcie3v3-supply = <&vcc3v3_pi6c_05>;
> +	status = "okay";
> +};
> +
> +&pcie30phy {
> +	data-lanes = <1 2>;
> +	status = "okay";
> +};
> +
> +&pcie3x1 {
> +	num-lanes = <1>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pcie30x1m0_pins>;
> +	reset-gpios = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>;
> +	vpcie3v3-supply = <&vcc3v3_pcie30x1>;
> +	status = "okay";
> +};
> +
> +&pcie3x2 {
> +	num-lanes = <1>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pcie30x2_reset_h>;
> +	reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
> +	vpcie3v3-supply = <&vcc3v3_pi6c_05>;
> +	status = "okay";
> +};
> +
> +&pinctrl {
> +	leds {
> +		led_user_en: led_user_en {
> +			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
> +		};
> +	};
> +
> +	pcie {
> +		pcie20_reset_h: pcie20-reset-h {
> +			rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
> +		};
> +
> +		pcie30x1_enable_h: pcie30x1-enable-h {
> +			rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
> +		};
> +
> +		pcie30x2_reset_h: pcie30x2-reset-h {
> +			rockchip,pins = <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
> +		};
> +
> +		pcie_enable_h: pcie-enable-h {
> +			rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
> +		};
> +	};
> +
> +	pmic {
> +		pmic_int: pmic_int {
> +			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
> +		};
> +	};
> +
> +	usb {
> +		minipcie_enable_h: minipcie-enable-h {
> +			rockchip,pins = <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
> +		};
> +
> +		ngffpcie_enable_h: ngffpcie-enable-h {
> +			rockchip,pins = <0 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
> +		};
> +
> +		vcc5v0_usb_otg_en: vcc5v0_usb_otg_en {
> +			rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
> +		};
> +	};
> +};
> +
> +&pmu_io_domains {
> +	pmuio1-supply = <&vcc3v3_pmu>;
> +	pmuio2-supply = <&vcc3v3_pmu>;
> +	vccio1-supply = <&vccio_acodec>;
> +	vccio2-supply = <&vcc_1v8>;
> +	vccio3-supply = <&vccio_sd>;
> +	vccio4-supply = <&vcc_1v8>;
> +	vccio5-supply = <&vcc_3v3>;
> +	vccio6-supply = <&vcc_1v8>;
> +	vccio7-supply = <&vcc_3v3>;
> +	status = "okay";
> +};
> +
> +&pwm1 {
> +	status = "okay";
> +};
> +
> +&pwm2 {
> +	status = "okay";
> +};
> +
> +&pwm12 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pwm12m1_pins>;
> +	status = "okay";
> +};
> +
> +&saradc {
> +	vref-supply = <&vcca_1v8>;
> +	status = "okay";
> +};
> +
> +&sdhci {
> +	bus-width = <8>;
> +	max-frequency = <200000000>;
> +	non-removable;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
> +	vmmc-supply = <&vcc_3v3>;
> +	vqmmc-supply = <&vcc_1v8>;
> +	status = "okay";
> +};
> +
> +&sdmmc0 {
> +	bus-width = <4>;
> +	cap-sd-highspeed;
> +	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
> +	/* Also used in pcie30x1_clkreqnm0 */
> +	disable-wp;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd>;
> +	sd-uhs-sdr104;
> +	vmmc-supply = <&vcc3v3_sd>;
> +	vqmmc-supply = <&vccio_sd>;
> +	status = "okay";
> +};
> +
> +&tsadc {
> +	rockchip,hw-tshut-mode = <1>;
> +	rockchip,hw-tshut-polarity = <0>;
> +	status = "okay";
> +};
> +
> +&uart2 {
> +	status = "okay";
> +};
> +
> +&usb_host0_ehci {
> +	status = "okay";
> +};
> +
> +&usb_host0_ohci {
> +	status = "okay";
> +};
> +
> +&usb_host0_xhci {
> +	extcon = <&usb2phy0>;
> +	status = "okay";
> +};
> +
> +&usb_host1_ehci {
> +	status = "okay";
> +};
> +
> +&usb_host1_ohci {
> +	status = "okay";
> +};
> +
> +&usb2phy0 {
> +	status = "okay";
> +};
> +
> +&usb2phy0_otg {
> +	phy-supply = <&vcc5v0_usb_otg>;
> +	status = "okay";
> +};
> +
> +&usb2phy1 {
> +	status = "okay";
> +};
> +
> +&usb2phy1_host {
> +	phy-supply = <&vcc3v3_minipcie>;
> +	status = "okay";
> +};
> +
> +&usb2phy1_otg {
> +	phy-supply = <&vcc3v3_ngff>;
> +	status = "okay";
> +};

--
FUKAUMI Naoki