ARM: dts: sti: align LED node names with dtschema
Commit Message
The node names should be generic and DT schema expects certain pattern:
stih407-b2120.dtb: leds: 'green', 'red' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm/boot/dts/stih410-b2260.dts | 8 ++++----
arch/arm/boot/dts/stih418-b2199.dts | 4 ++--
arch/arm/boot/dts/stih418-b2264.dts | 2 +-
arch/arm/boot/dts/stihxxx-b2120.dtsi | 4 ++--
4 files changed, 9 insertions(+), 9 deletions(-)
Comments
Hi Krzysztof
On 11/25/22 15:41, Krzysztof Kozlowski wrote:
> The node names should be generic and DT schema expects certain pattern:
>
> stih407-b2120.dtb: leds: 'green', 'red' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
> arch/arm/boot/dts/stih410-b2260.dts | 8 ++++----
> arch/arm/boot/dts/stih418-b2199.dts | 4 ++--
> arch/arm/boot/dts/stih418-b2264.dts | 2 +-
> arch/arm/boot/dts/stihxxx-b2120.dtsi | 4 ++--
> 4 files changed, 9 insertions(+), 9 deletions(-)
>
> diff --git a/arch/arm/boot/dts/stih410-b2260.dts b/arch/arm/boot/dts/stih410-b2260.dts
> index 26d93f26f6d0..240b62040000 100644
> --- a/arch/arm/boot/dts/stih410-b2260.dts
> +++ b/arch/arm/boot/dts/stih410-b2260.dts
> @@ -27,26 +27,26 @@ aliases {
>
> leds {
> compatible = "gpio-leds";
> - user_green_1 {
> + led-user-green-1 {
> label = "User_green_1";
> gpios = <&pio1 3 GPIO_ACTIVE_LOW>;
> linux,default-trigger = "heartbeat";
> default-state = "off";
> };
>
> - user_green_2 {
> + led-user-green-2 {
> label = "User_green_2";
> gpios = <&pio4 1 GPIO_ACTIVE_LOW>;
> default-state = "off";
> };
>
> - user_green_3 {
> + led-user-green-3 {
> label = "User_green_3";
> gpios = <&pio2 1 GPIO_ACTIVE_LOW>;
> default-state = "off";
> };
>
> - user_green_4 {
> + led-user-green-4 {
> label = "User_green_4";
> gpios = <&pio2 5 GPIO_ACTIVE_LOW>;
> default-state = "off";
> diff --git a/arch/arm/boot/dts/stih418-b2199.dts b/arch/arm/boot/dts/stih418-b2199.dts
> index d21bcc7c1271..53ac6c2b7b7d 100644
> --- a/arch/arm/boot/dts/stih418-b2199.dts
> +++ b/arch/arm/boot/dts/stih418-b2199.dts
> @@ -26,12 +26,12 @@ aliases {
>
> leds {
> compatible = "gpio-leds";
> - red {
> + led-red {
> label = "Front Panel LED";
> gpios = <&pio4 1 GPIO_ACTIVE_HIGH>;
> linux,default-trigger = "heartbeat";
> };
> - green {
> + led-green {
> gpios = <&pio1 3 GPIO_ACTIVE_HIGH>;
> default-state = "off";
> };
> diff --git a/arch/arm/boot/dts/stih418-b2264.dts b/arch/arm/boot/dts/stih418-b2264.dts
> index a99604bebf8c..34a518b037ab 100644
> --- a/arch/arm/boot/dts/stih418-b2264.dts
> +++ b/arch/arm/boot/dts/stih418-b2264.dts
> @@ -76,7 +76,7 @@ aliases {
> soc {
> leds {
> compatible = "gpio-leds";
> - green {
> + led-green {
> gpios = <&pio1 3 GPIO_ACTIVE_HIGH>;
> default-state = "off";
> };
> diff --git a/arch/arm/boot/dts/stihxxx-b2120.dtsi b/arch/arm/boot/dts/stihxxx-b2120.dtsi
> index 2aa94605d3d4..920a0bad7494 100644
> --- a/arch/arm/boot/dts/stihxxx-b2120.dtsi
> +++ b/arch/arm/boot/dts/stihxxx-b2120.dtsi
> @@ -9,12 +9,12 @@
> / {
> leds {
> compatible = "gpio-leds";
> - red {
> + led-red {
> label = "Front Panel LED";
> gpios = <&pio4 1 GPIO_ACTIVE_HIGH>;
> linux,default-trigger = "heartbeat";
> };
> - green {
> + led-green {
> gpios = <&pio1 3 GPIO_ACTIVE_HIGH>;
> default-state = "off";
> };
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Thanks
Patrice
On Fri, 25 Nov 2022 15:41:16 +0100, Krzysztof Kozlowski wrote:
> The node names should be generic and DT schema expects certain pattern:
>
> stih407-b2120.dtb: leds: 'green', 'red' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
>
>
Applied, thanks!
[1/1] ARM: dts: sti: align LED node names with dtschema
https://git.kernel.org/krzk/linux-dt/c/91bf30a42b16257f98345c9ba519d72babbbaf8a
Best regards,
@@ -27,26 +27,26 @@ aliases {
leds {
compatible = "gpio-leds";
- user_green_1 {
+ led-user-green-1 {
label = "User_green_1";
gpios = <&pio1 3 GPIO_ACTIVE_LOW>;
linux,default-trigger = "heartbeat";
default-state = "off";
};
- user_green_2 {
+ led-user-green-2 {
label = "User_green_2";
gpios = <&pio4 1 GPIO_ACTIVE_LOW>;
default-state = "off";
};
- user_green_3 {
+ led-user-green-3 {
label = "User_green_3";
gpios = <&pio2 1 GPIO_ACTIVE_LOW>;
default-state = "off";
};
- user_green_4 {
+ led-user-green-4 {
label = "User_green_4";
gpios = <&pio2 5 GPIO_ACTIVE_LOW>;
default-state = "off";
@@ -26,12 +26,12 @@ aliases {
leds {
compatible = "gpio-leds";
- red {
+ led-red {
label = "Front Panel LED";
gpios = <&pio4 1 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
- green {
+ led-green {
gpios = <&pio1 3 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
@@ -76,7 +76,7 @@ aliases {
soc {
leds {
compatible = "gpio-leds";
- green {
+ led-green {
gpios = <&pio1 3 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
@@ -9,12 +9,12 @@
/ {
leds {
compatible = "gpio-leds";
- red {
+ led-red {
label = "Front Panel LED";
gpios = <&pio4 1 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
- green {
+ led-green {
gpios = <&pio1 3 GPIO_ACTIVE_HIGH>;
default-state = "off";
};