Split SC8280XP remote processor Peripheral Authentication Service bindings
into their own file to reduce complexity and make maintenance easier.
While moving correctly constrain the number of interrupts per specific
device.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
Changes since v2:
1. Drop if:then: for the clock and put it directly under properties.
2. Merge two if:then: clauses for setting interrupts.
Changes since v1:
1. Add qcom,qmp (not part of qcom,pas-common.yaml# anymore).
2. Add firmware-name to example.
3. Correct maxItems: 5 for interrupts.
---
.../bindings/remoteproc/qcom,adsp.yaml | 26 ----
.../remoteproc/qcom,sc8280xp-pas.yaml | 139 ++++++++++++++++++
2 files changed, 139 insertions(+), 26 deletions(-)
create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,sc8280xp-pas.yaml
On Thu, 24 Nov 2022 19:43:28 +0100, Krzysztof Kozlowski wrote:
> Split SC8280XP remote processor Peripheral Authentication Service bindings
> into their own file to reduce complexity and make maintenance easier.
>
> While moving correctly constrain the number of interrupts per specific
> device.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>
> ---
>
> Changes since v2:
> 1. Drop if:then: for the clock and put it directly under properties.
> 2. Merge two if:then: clauses for setting interrupts.
>
> Changes since v1:
> 1. Add qcom,qmp (not part of qcom,pas-common.yaml# anymore).
> 2. Add firmware-name to example.
> 3. Correct maxItems: 5 for interrupts.
> ---
> .../bindings/remoteproc/qcom,adsp.yaml | 26 ----
> .../remoteproc/qcom,sc8280xp-pas.yaml | 139 ++++++++++++++++++
> 2 files changed, 139 insertions(+), 26 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,sc8280xp-pas.yaml
>
Acked-by: Rob Herring <robh@kernel.org>
@@ -30,9 +30,6 @@ properties:
- qcom,sc8180x-adsp-pas
- qcom,sc8180x-cdsp-pas
- qcom,sc8180x-mpss-pas
- - qcom,sc8280xp-adsp-pas
- - qcom,sc8280xp-nsp0-pas
- - qcom,sc8280xp-nsp1-pas
- qcom,sdm660-adsp-pas
- qcom,sdm845-adsp-pas
- qcom,sdm845-cdsp-pas
@@ -76,9 +73,6 @@ allOf:
- qcom,sc8180x-adsp-pas
- qcom,sc8180x-cdsp-pas
- qcom,sc8180x-mpss-pas
- - qcom,sc8280xp-adsp-pas
- - qcom,sc8280xp-nsp0-pas
- - qcom,sc8280xp-nsp1-pas
- qcom,sdm845-adsp-pas
- qcom,sdm845-cdsp-pas
then:
@@ -123,9 +117,6 @@ allOf:
- qcom,qcs404-wcss-pas
- qcom,sc8180x-adsp-pas
- qcom,sc8180x-cdsp-pas
- - qcom,sc8280xp-adsp-pas
- - qcom,sc8280xp-nsp0-pas
- - qcom,sc8280xp-nsp1-pas
- qcom,sdm845-adsp-pas
- qcom,sdm845-cdsp-pas
then:
@@ -240,7 +231,6 @@ allOf:
enum:
- qcom,sc8180x-adsp-pas
- qcom,sc8180x-cdsp-pas
- - qcom,sc8280xp-adsp-pas
then:
properties:
power-domains:
@@ -252,22 +242,6 @@ allOf:
- const: lcx
- const: lmx
- - if:
- properties:
- compatible:
- contains:
- enum:
- - qcom,sc8280xp-nsp0-pas
- - qcom,sc8280xp-nsp1-pas
- then:
- properties:
- power-domains:
- items:
- - description: NSP power domain
- power-domain-names:
- items:
- - const: nsp
-
- if:
properties:
compatible:
new file mode 100644
@@ -0,0 +1,139 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/qcom,sc8280xp-pas.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SC8280XP Peripheral Authentication Service
+
+maintainers:
+ - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description:
+ Qualcomm SC8280XP SoC Peripheral Authentication Service loads and boots
+ firmware on the Qualcomm DSP Hexagon cores.
+
+properties:
+ compatible:
+ enum:
+ - qcom,sc8280xp-adsp-pas
+ - qcom,sc8280xp-nsp0-pas
+ - qcom,sc8280xp-nsp1-pas
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: XO clock
+
+ clock-names:
+ items:
+ - const: xo
+
+ qcom,qmp:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: Reference to the AOSS side-channel message RAM.
+
+ smd-edge: false
+
+required:
+ - compatible
+ - reg
+
+allOf:
+ - $ref: /schemas/remoteproc/qcom,pas-common.yaml#
+ - if:
+ properties:
+ compatible:
+ enum:
+ - qcom,sc8280xp-nsp0-pas
+ - qcom,sc8280xp-nsp1-pas
+ then:
+ properties:
+ interrupts:
+ maxItems: 5
+ interrupt-names:
+ maxItems: 5
+ else:
+ properties:
+ interrupts:
+ minItems: 6
+ interrupt-names:
+ minItems: 6
+
+ - if:
+ properties:
+ compatible:
+ enum:
+ - qcom,sc8280xp-adsp-pas
+ then:
+ properties:
+ power-domains:
+ items:
+ - description: LCX power domain
+ - description: LMX power domain
+ power-domain-names:
+ items:
+ - const: lcx
+ - const: lmx
+ else:
+ properties:
+ power-domains:
+ items:
+ - description: NSP power domain
+ power-domain-names:
+ items:
+ - const: nsp
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/mailbox/qcom-ipcc.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
+ remoteproc@3000000 {
+ compatible = "qcom,sc8280xp-adsp-pas";
+ reg = <0x03000000 0x100>;
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
+
+ firmware-name = "qcom/sc8280xp/qcadsp8280.mbn";
+
+ interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+ <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 7 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack", "shutdown-ack";
+
+ memory-region = <&pil_adsp_mem>;
+
+ power-domains = <&rpmhpd SC8280XP_LCX>,
+ <&rpmhpd SC8280XP_LMX>;
+ power-domain-names = "lcx", "lmx";
+
+ qcom,qmp = <&aoss_qmp>;
+ qcom,smem-states = <&smp2p_adsp_out 0>;
+ qcom,smem-state-names = "stop";
+
+ glink-edge {
+ interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+ IPCC_MPROC_SIGNAL_GLINK_QMP
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_LPASS
+ IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+ label = "lpass";
+ qcom,remote-pid = <2>;
+
+ /* ... */
+ };
+ };