net: fec: don't reset irq coalesce settings to defaults on "ip link up"
Commit Message
Currently, when a FEC device is brought up, the irq coalesce settings
are reset to their default values (1000us, 200 frames). That's
unexpected, and breaks for example use of an appropriate .link file to
make systemd-udev apply the desired
settings (https://www.freedesktop.org/software/systemd/man/systemd.link.html),
or any other method that would do a one-time setup during early boot.
Refactor the code so that fec_restart() instead uses
fec_enet_itr_coal_set(), which simply applies the settings that are
stored in the private data, and initialize that private data with the
default values.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
---
drivers/net/ethernet/freescale/fec_main.c | 22 ++++++----------------
1 file changed, 6 insertions(+), 16 deletions(-)
Comments
On Wed, Nov 23, 2022 at 02:38:52PM +0100, Rasmus Villemoes wrote:
> Currently, when a FEC device is brought up, the irq coalesce settings
> are reset to their default values (1000us, 200 frames). That's
> unexpected, and breaks for example use of an appropriate .link file to
> make systemd-udev apply the desired
> settings (https://www.freedesktop.org/software/systemd/man/systemd.link.html),
> or any other method that would do a one-time setup during early boot.
>
> Refactor the code so that fec_restart() instead uses
> fec_enet_itr_coal_set(), which simply applies the settings that are
> stored in the private data, and initialize that private data with the
> default values.
>
> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Andrew
Hello:
This patch was applied to netdev/net.git (master)
by David S. Miller <davem@davemloft.net>:
On Wed, 23 Nov 2022 14:38:52 +0100 you wrote:
> Currently, when a FEC device is brought up, the irq coalesce settings
> are reset to their default values (1000us, 200 frames). That's
> unexpected, and breaks for example use of an appropriate .link file to
> make systemd-udev apply the desired
> settings (https://www.freedesktop.org/software/systemd/man/systemd.link.html),
> or any other method that would do a one-time setup during early boot.
>
> [...]
Here is the summary with links:
- net: fec: don't reset irq coalesce settings to defaults on "ip link up"
https://git.kernel.org/netdev/net/c/df727d4547de
You are awesome, thank you!
@@ -74,7 +74,7 @@
#include "fec.h"
static void set_multicast_list(struct net_device *ndev);
-static void fec_enet_itr_coal_init(struct net_device *ndev);
+static void fec_enet_itr_coal_set(struct net_device *ndev);
#define DRIVER_NAME "fec"
@@ -1220,8 +1220,7 @@ fec_restart(struct net_device *ndev)
writel(0, fep->hwp + FEC_IMASK);
/* Init the interrupt coalescing */
- fec_enet_itr_coal_init(ndev);
-
+ fec_enet_itr_coal_set(ndev);
}
static int fec_enet_ipc_handle_init(struct fec_enet_private *fep)
@@ -2856,19 +2855,6 @@ static int fec_enet_set_coalesce(struct net_device *ndev,
return 0;
}
-static void fec_enet_itr_coal_init(struct net_device *ndev)
-{
- struct ethtool_coalesce ec;
-
- ec.rx_coalesce_usecs = FEC_ITR_ICTT_DEFAULT;
- ec.rx_max_coalesced_frames = FEC_ITR_ICFT_DEFAULT;
-
- ec.tx_coalesce_usecs = FEC_ITR_ICTT_DEFAULT;
- ec.tx_max_coalesced_frames = FEC_ITR_ICFT_DEFAULT;
-
- fec_enet_set_coalesce(ndev, &ec, NULL, NULL);
-}
-
static int fec_enet_get_tunable(struct net_device *netdev,
const struct ethtool_tunable *tuna,
void *data)
@@ -3623,6 +3609,10 @@ static int fec_enet_init(struct net_device *ndev)
fep->rx_align = 0x3;
fep->tx_align = 0x3;
#endif
+ fep->rx_pkts_itr = FEC_ITR_ICFT_DEFAULT;
+ fep->tx_pkts_itr = FEC_ITR_ICFT_DEFAULT;
+ fep->rx_time_itr = FEC_ITR_ICTT_DEFAULT;
+ fep->tx_time_itr = FEC_ITR_ICTT_DEFAULT;
/* Check mask of the streaming and coherent API */
ret = dma_set_mask_and_coherent(&fep->pdev->dev, DMA_BIT_MASK(32));