[v2,4/4] irqchip: irq-mtk-cirq: Add support for System CIRQ on MT8192

Message ID 20221123112249.98281-5-angelogioacchino.delregno@collabora.com
State New
Headers
Series MediaTek CIRQ: new register layout and schema |

Commit Message

AngeloGioacchino Del Regno Nov. 23, 2022, 11:22 a.m. UTC
  On some SoCs the System CIRQ register layout is slightly different,
as there are more registers per function and in some cases other
differences later in the layout: this is seen on at least MT8192,
but it's also valid for some other "contemporary" SoCs both for
Chromebooks and for smartphones.

Add the new "v2" register layout and use it if the compatible
"mediatek,mt8192-cirq" is found.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
 drivers/irqchip/irq-mtk-cirq.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)
  

Patch

diff --git a/drivers/irqchip/irq-mtk-cirq.c b/drivers/irqchip/irq-mtk-cirq.c
index 4d873d2ba0fd..57452d389b47 100644
--- a/drivers/irqchip/irq-mtk-cirq.c
+++ b/drivers/irqchip/irq-mtk-cirq.c
@@ -39,6 +39,18 @@  static const u32 mtk_cirq_regs_v1[] = {
 	[CIRQ_CONTROL]	= 0x300,
 };
 
+static const u32 mtk_cirq_regs_v2[] = {
+	[CIRQ_STA]	= 0x0,
+	[CIRQ_ACK]	= 0x80,
+	[CIRQ_MASK_SET]	= 0x180,
+	[CIRQ_MASK_CLR]	= 0x200,
+	[CIRQ_SENS_SET]	= 0x300,
+	[CIRQ_SENS_CLR]	= 0x380,
+	[CIRQ_POL_SET]	= 0x480,
+	[CIRQ_POL_CLR]	= 0x500,
+	[CIRQ_CONTROL]	= 0x600,
+};
+
 #define CIRQ_EN	0x1
 #define CIRQ_EDGE	0x2
 #define CIRQ_FLUSH	0x4
@@ -273,6 +285,7 @@  static const struct of_device_id mtk_cirq_of_match[] = {
 	{ .compatible = "mediatek,mt2701-cirq", .data = &mtk_cirq_regs_v1 },
 	{ .compatible = "mediatek,mt8135-cirq", .data = &mtk_cirq_regs_v1 },
 	{ .compatible = "mediatek,mt8173-cirq", .data = &mtk_cirq_regs_v1 },
+	{ .compatible = "mediatek,mt8192-cirq", .data = &mtk_cirq_regs_v2 },
 	{ /* sentinel */ }
 };