[GIT,PULL,3/4] arm64: dts: TI K3 updates for v6.2

  Hi,

Please find the TI K3 SoC related devicetree changes for v6.2-rc1 below.

---
The following changes since commit 9abf2313adc1ca1b6180c508c25f22f9395cc780:

  Linux 6.1-rc1 (2022-10-16 15:36:24 -0700)

are available in the Git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git tags/ti-k3-dt-for-v6.2

for you to fetch changes up to fae14a1cb8dddb83bb923093aade3470a872f048:

  arm64: dts: ti: Add k3-j721e-beagleboneai64 (2022-11-21 15:49:45 -0600)

----------------------------------------------------------------
TI K3 devicetree updates for v6.2

New Features:
J721e:
* PWMs, BeagleBone AI-64 platform.
J721s2:
* Crypto

AM65/AM62:
* General purpose Timer support (system timer is still arch timer)

Fixes:
* Bunch of fixes in crypto usage and GPIO intr
* Minor schema related fixes for audio, addressing etc.

Cleanups:
* Refactor of device tree to "disable" peripherals at SoC level
  for nodes that are un-usable without board level properties.
  TI K3 devices have large number of peripherals of which only a
  smaller subset is actually enabled on platforms. Switching
  to this approach enables two benefits: lesser confusion in
  creating board level devicetrees as only relevant pinned out
  device nodes need enabled, as well as smaller board device
  trees as most un-used peripherals don't need to explicitly
  disabled.

----------------------------------------------------------------
Andrew Davis (43):
      arm64: dts: ti: k3-am64: Enable UART nodes at the board level
      arm64: dts: ti: k3-am64: Enable I2C nodes at the board level
      arm64: dts: ti: k3-am64: Enable SPI nodes at the board level
      arm64: dts: ti: k3-am64: Enable EPWM nodes at the board level
      arm64: dts: ti: k3-am64: Enable ECAP nodes at the board level
      arm64: dts: ti: k3-am64: Enable PCIe nodes at the board level
      arm64: dts: ti: k3-am64: MDIO pinmux should belong to the MDIO node
      arm64: dts: ti: k3-am64: Enable MDIO nodes at the board level
      arm64: dts: ti: k3-am64: Enable MCAN nodes at the board level
      arm64: dts: ti: k3-am64: Enable GPMC and ELM nodes at the board level
      arm64: dts: ti: k3-am62: Enable UART nodes at the board level
      arm64: dts: ti: k3-am62: Enable I2C nodes at the board level
      arm64: dts: ti: k3-am62: Enable SPI nodes at the board level
      arm64: dts: ti: k3-am62: Enable EPWM nodes at the board level
      arm64: dts: ti: k3-am62: Enable ECAP nodes at the board level
      arm64: dts: ti: k3-am62: MDIO pinmux should belong to the MDIO node
      arm64: dts: ti: k3-am62: Enable MDIO nodes at the board level
      arm64: dts: ti: k3-am62: Enable MCAN nodes at the board level
      arm64: dts: ti: k3-am62: Enable SDHCI nodes at the board level
      arm64: dts: ti: k3-am62: Enable OSPI nodes at the board level
      arm64: dts: ti: k3-j721e: Enable UART nodes at the board level
      arm64: dts: ti: k3-j721e: Enable I2C nodes at the board level
      arm64: dts: ti: k3-j721e: Enable MCASP nodes at the board level
      arm64: dts: ti: k3-j721e: Enable MCAN nodes at the board level
      arm64: dts: ti: k3-j7200: Enable UART nodes at the board level
      arm64: dts: ti: k3-j7200: Enable I2C nodes at the board level
      arm64: dts: ti: k3-j721s2: Enable UART nodes at the board level
      arm64: dts: ti: k3-j721e: Enable Mailbox nodes at the board level
      arm64: dts: ti: k3-j7200: Enable Mailbox nodes at the board level
      arm64: dts: ti: k3-j721s2: Enable Mailbox nodes at the board level
      arm64: dts: ti: k3-j721s2: Enable MCAN nodes at the board level
      arm64: dts: ti: k3-j721s2: Enable I2C nodes at the board level
      arm64: dts: ti: k3-am65: Enable UART nodes at the board level
      arm64: dts: ti: k3-am65: Enable I2C nodes at the board level
      arm64: dts: ti: k3-am65: Enable SPI nodes at the board level
      arm64: dts: ti: k3-am65: Enable EPWM nodes at the board level
      arm64: dts: ti: k3-am65: Enable ECAP nodes at the board level
      arm64: dts: ti: k3-am65: MDIO pinmux should belong to the MDIO node
      arm64: dts: ti: k3-am65: Enable MDIO nodes at the board level
      arm64: dts: ti: k3-am65: Enable MCAN nodes at the board level
      arm64: dts: ti: k3-am65: Enable PCIe nodes at the board level
      arm64: dts: ti: k3-am65: Enable Mailbox nodes at the board level
      arm64: dts: ti: k3-am65: Enable McASP nodes at the board level

Jayesh Choudhary (8):
      arm64: dts: ti: k3-am65-main: Drop dma-coherent in crypto node
      arm64: dts: ti: k3-j721e-main: Drop dma-coherent in crypto node
      arm64: dts: ti: k3-j7200-mcu-wakeup: Drop dma-coherent in crypto node
      arm64: dts: ti: j721e-common-proc-board: Fix sound node-name
      arm64: dts: ti: k3-am65-main: Drop RNG clock
      arm64: dts: ti: k3-j721e-main: Drop RNG clock
      arm64: dts: ti: k3-am64-main: Drop RNG clock
      arm64: dts: ti: k3-j721s2-main: Enable crypto accelerator

Keerthy (1):
      arm64: dts: ti: k3-j721s2: Fix the interrupt ranges property for main & wkup gpio intr

Krzysztof Kozlowski (1):
      arm64: dts: ti: Trim addresses to 8 digits

Matt Ranostay (1):
      arm64: dts: ti: Rename clock-names adc_tsc_fck to fck

Rahul T R (1):
      arm64: dts: ti: k3-j721e-sk: Add pinmux for RPi Header

Robert Nelson (2):
      dt-bindings: arm: ti: Add bindings for BeagleBone AI-64
      arm64: dts: ti: Add k3-j721e-beagleboneai64

Tony Lindgren (3):
      arm64: dts: ti: k3-am65: Configure pinctrl for timer IO pads
      arm64: dts: ti: k3-am65: Add general purpose timers for am65
      arm64: dts: ti: k3-am62: Add general purpose timers for am62

Vijay Pothukuchi (1):
      arm64: dts: ti: k3-j721e-main: Add dts nodes for EHRPWMs

 Documentation/devicetree/bindings/arm/ti/k3.yaml   |    1 +
 arch/arm64/boot/dts/ti/Makefile                    |    1 +
 arch/arm64/boot/dts/ti/k3-am62-main.dtsi           |  122 +++
 arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi            |   49 +
 arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi         |    4 +-
 arch/arm64/boot/dts/ti/k3-am625-sk.dts             |   81 +-
 arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi        |    2 +-
 arch/arm64/boot/dts/ti/k3-am64-main.dtsi           |   44 +-
 arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi            |    6 +
 arch/arm64/boot/dts/ti/k3-am642-evm.dts            |  119 +--
 arch/arm64/boot/dts/ti/k3-am642-sk.dts             |  142 +--
 arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi |  101 +-
 arch/arm64/boot/dts/ti/k3-am65-main.dtsi           |  207 +++-
 arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi            |   85 +-
 arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi         |    2 +
 .../dts/ti/k3-am6528-iot2050-basic-common.dtsi     |    1 +
 arch/arm64/boot/dts/ti/k3-am654-base-board.dts     |  113 +--
 .../dts/ti/k3-am6548-iot2050-advanced-common.dtsi  |    4 -
 .../boot/dts/ti/k3-j7200-common-proc-board.dts     |   48 +-
 arch/arm64/boot/dts/ti/k3-j7200-main.dtsi          |   29 +
 arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi    |    8 +-
 arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi        |   42 +-
 arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts | 1055 ++++++++++++++++++++
 .../boot/dts/ti/k3-j721e-common-proc-board.dts     |  143 +--
 arch/arm64/boot/dts/ti/k3-j721e-main.dtsi          |  125 ++-
 arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi    |   11 +-
 arch/arm64/boot/dts/ti/k3-j721e-sk.dts             |  205 ++--
 arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi        |   33 +-
 .../boot/dts/ti/k3-j721s2-common-proc-board.dts    |  132 +--
 arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi         |   79 +-
 arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi   |    9 +-
 arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi       |   98 +-
 32 files changed, 2007 insertions(+), 1094 deletions(-)
 create mode 100644 arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts