[v1,4/5] ARM: dts: colibri-imx7: Disable usb over-current
Commit Message
From: Philippe Schenker <philippe.schenker@toradex.com>
Disable usb over-current of the chipidea driver on all Carrier-Boards
used by Toradex. Do this as we don't want to use this functionality on
our Carrier Boards and to leave it open to someone who includes our
module-level device-trees.
This will prevent the warning "No over current polarity defined" from
being printed on boot.
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
---
arch/arm/boot/dts/imx7-colibri-aster.dtsi | 1 +
arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi | 1 +
arch/arm/boot/dts/imx7-colibri-iris-v2.dtsi | 1 +
arch/arm/boot/dts/imx7-colibri-iris.dtsi | 1 +
arch/arm/boot/dts/imx7d-colibri-aster.dts | 1 +
arch/arm/boot/dts/imx7d-colibri-emmc-aster.dts | 1 +
arch/arm/boot/dts/imx7d-colibri-emmc-eval-v3.dts | 1 +
arch/arm/boot/dts/imx7d-colibri-emmc-iris-v2.dts | 1 +
arch/arm/boot/dts/imx7d-colibri-emmc-iris.dts | 1 +
arch/arm/boot/dts/imx7d-colibri-emmc.dtsi | 1 +
arch/arm/boot/dts/imx7d-colibri-eval-v3.dts | 1 +
arch/arm/boot/dts/imx7d-colibri-iris-v2.dts | 1 +
arch/arm/boot/dts/imx7d-colibri-iris.dts | 1 +
13 files changed, 13 insertions(+)
@@ -70,6 +70,7 @@ &uart3 {
/* Colibri USBC */
&usbotg1 {
+ disable-over-current;
status = "okay";
};
@@ -101,6 +101,7 @@ &uart3 {
/* Colibri USBC */
&usbotg1 {
+ disable-over-current;
status = "okay";
};
@@ -99,6 +99,7 @@ &uart3 {
/* Colibri USBC */
&usbotg1 {
+ disable-over-current;
status = "okay";
};
@@ -99,6 +99,7 @@ &uart3 {
/* Colibri USBC */
&usbotg1 {
+ disable-over-current;
status = "okay";
};
@@ -36,5 +36,6 @@ &panel_dpi {
/* Colibri USBH */
&usbotg2 {
+ disable-over-current;
status = "okay";
};
@@ -18,5 +18,6 @@ / {
/* Colibri USBH */
&usbotg2 {
+ disable-over-current;
status = "okay";
};
@@ -17,5 +17,6 @@ / {
/* Colibri USBH */
&usbotg2 {
+ disable-over-current;
status = "okay";
};
@@ -17,5 +17,6 @@ / {
/* Colibri USBH */
&usbotg2 {
+ disable-over-current;
status = "okay";
};
@@ -17,5 +17,6 @@ / {
/* Colibri USBH */
&usbotg2 {
+ disable-over-current;
status = "okay";
};
@@ -51,6 +51,7 @@ &gpio6 {
/* Colibri USBH */
&usbotg2 {
+ disable-over-current;
dr_mode = "host";
vbus-supply = <®_usbh_vbus>;
};
@@ -52,5 +52,6 @@ &pwm3 {
/* Colibri USBH */
&usbotg2 {
+ disable-over-current;
status = "okay";
};
@@ -79,5 +79,6 @@ &panel_dpi {
/* Colibri USBH */
&usbotg2 {
+ disable-over-current;
status = "okay";
};
@@ -52,5 +52,6 @@ &pwm3 {
/* Colibri USBH */
&usbotg2 {
+ disable-over-current;
status = "okay";
};