[v2,6/9] arm64: dts: qcom: msm8953: Add device tree for Xiaomi Redmi Note 4X

Message ID 20221119203758.888207-7-luca@z3ntu.xyz
State New
Headers
Series Add a bunch of msm8953 dts files |

Commit Message

Luca Weiss Nov. 19, 2022, 8:37 p.m. UTC
  From: Adam Skladowski <a39.skl@gmail.com>

Add device tree for the Xiaomi Redmi Note 4X (mido) smartphone. This
device is based on Snapdragon 625 (msm8953) SoC.

Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
---
Changes in v2:
* address review comments from v1

 arch/arm64/boot/dts/qcom/Makefile             |   1 +
 .../boot/dts/qcom/msm8953-xiaomi-mido.dts     | 329 ++++++++++++++++++
 2 files changed, 330 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/msm8953-xiaomi-mido.dts
  

Comments

Konrad Dybcio Nov. 21, 2022, 11:18 a.m. UTC | #1
On 19.11.2022 21:37, Luca Weiss wrote:
> From: Adam Skladowski <a39.skl@gmail.com>
> 
> Add device tree for the Xiaomi Redmi Note 4X (mido) smartphone. This
> device is based on Snapdragon 625 (msm8953) SoC.
> 
> Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
> Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
> Changes in v2:
> * address review comments from v1
> 
>  arch/arm64/boot/dts/qcom/Makefile             |   1 +
>  .../boot/dts/qcom/msm8953-xiaomi-mido.dts     | 329 ++++++++++++++++++
>  2 files changed, 330 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/qcom/msm8953-xiaomi-mido.dts
> 
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index 158d1f19eba3..cd667df63326 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -23,6 +23,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-serranove.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-wingtech-wt88047.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= msm8953-motorola-potter.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= msm8953-xiaomi-daisy.dtb
> +dtb-$(CONFIG_ARCH_QCOM)	+= msm8953-xiaomi-mido.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= msm8992-lg-bullhead-rev-10.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= msm8992-lg-bullhead-rev-101.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= msm8992-msft-lumia-octagon-talkman.dtb
> diff --git a/arch/arm64/boot/dts/qcom/msm8953-xiaomi-mido.dts b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-mido.dts
> new file mode 100644
> index 000000000000..0304f0ec1350
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-mido.dts
> @@ -0,0 +1,329 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/dts-v1/;
> +
> +#include "msm8953.dtsi"
> +#include "pm8953.dtsi"
> +#include "pmi8950.dtsi"
> +#include <dt-bindings/leds/common.h>
> +
> +/delete-node/ &cont_splash_mem;
> +/delete-node/ &qseecom_mem;
> +
> +/ {
> +	model = "Xiaomi Redmi Note 4X";
> +	compatible = "xiaomi,mido", "qcom,msm8953";
> +	chassis-type = "handset";
> +	qcom,msm-id = <293 0>;
> +	qcom,board-id = <11 0>;
> +
> +	aliases {
> +		mmc0 = &sdhc_1;
> +		mmc1 = &sdhc_2;
> +	};
> +
> +	speaker_amp: audio-amplifier {
> +		compatible = "awinic,aw8738";
> +		mode-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
> +		awinic,mode = <5>;
> +		sound-name-prefix = "Speaker Amp";
> +	};
> +
> +	chosen {
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges;
> +
> +		framebuffer@90001000 {
> +			compatible = "simple-framebuffer";
> +			reg = <0 0x90001000 0 (1920 * 1080 * 3)>;
> +
> +			width = <1080>;
> +			height = <1920>;
> +			stride = <(1080 * 3)>;
> +			format = "r8g8b8";
> +
> +			power-domains = <&gcc MDSS_GDSC>;
> +
> +			clocks = <&gcc GCC_MDSS_AHB_CLK>,
> +				 <&gcc GCC_MDSS_AXI_CLK>,
> +				 <&gcc GCC_MDSS_VSYNC_CLK>,
> +				 <&gcc GCC_MDSS_MDP_CLK>,
> +				 <&gcc GCC_MDSS_BYTE0_CLK>,
> +				 <&gcc GCC_MDSS_PCLK0_CLK>,
> +				 <&gcc GCC_MDSS_ESC0_CLK>;
> +		};
> +	};
> +
> +	gpio-keys {
> +		compatible = "gpio-keys";
> +
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&gpio_key_default>;
> +
> +		key-volume-up {
> +			label = "Volume Up";
> +			gpios = <&tlmm 85 GPIO_ACTIVE_LOW>;
> +			linux,code = <KEY_VOLUMEUP>;
> +		};
> +	};
> +
> +	reserved-memory {
> +		qseecom_mem: qseecom@84a00000 {
> +			reg = <0x0 0x84a00000 0x0 0x1900000>;
> +			no-map;
> +		};
> +
> +		cont_splash_mem: cont-splash@90001000 {
> +			reg = <0x0 0x90001000 0x0 (1080 * 1920 * 3)>;
> +			no-map;
> +		};
> +
> +		ramoops@9ff00000 {
> +			compatible = "ramoops";
> +			reg = <0x0 0x9ff00000 0x0 0x00100000>;
> +			console-size = <0x100000>;
> +		};
> +	};
> +
> +	vph_pwr: vph-pwr-regulator {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vph_pwr";
> +		regulator-min-microvolt = <3700000>;
> +		regulator-max-microvolt = <3700000>;
> +		regulator-always-on;
> +		regulator-boot-on;
> +	};
> +};
> +
> +&hsusb_phy {
> +	vdd-supply = <&pm8953_l3>;
> +	vdda-pll-supply = <&pm8953_l7>;
> +	vdda-phy-dpdm-supply = <&pm8953_l13>;
> +
> +	status = "okay";
> +};
> +
> +&i2c_2 {
> +	status = "okay";
> +
> +	led-controller@45 {
> +		compatible = "awinic,aw2013";
> +		reg = <0x45>;
> +
> +		vcc-supply = <&pm8953_l10>;
> +
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		led@0 {
> +			reg = <0>;
> +			color = <LED_COLOR_ID_RED>;
> +			function = LED_FUNCTION_INDICATOR;
> +			led-max-microamp = <5000>;
> +		};
> +
> +		led@1 {
> +			reg = <1>;
> +			color = <LED_COLOR_ID_GREEN>;
> +			function = LED_FUNCTION_INDICATOR;
> +			led-max-microamp = <5000>;
> +		};
> +
> +		led@2 {
> +			reg = <2>;
> +			color = <LED_COLOR_ID_BLUE>;
> +			function = LED_FUNCTION_INDICATOR;
> +			led-max-microamp = <5000>;
> +		};
> +	};
> +};
> +
> +&i2c_3 {
> +	status = "okay";
> +
> +	touchscreen@38 {
> +		compatible = "edt,edt-ft5406";
> +		reg = <0x38>;
> +
> +		interrupt-parent = <&tlmm>;
> +		interrupts = <65 IRQ_TYPE_EDGE_FALLING>;
> +
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&ts_int_active>;
> +
> +		reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
> +
> +		vcc-supply = <&pm8953_l10>;
> +
> +		touchscreen-size-x = <1080>;
> +		touchscreen-size-y = <1920>;
> +	};
> +};
> +
> +&pm8953_resin {
> +	linux,code = <KEY_VOLUMEDOWN>;
> +	status = "okay";
> +};
> +
> +&rpm_requests {
> +	regulators {
> +		compatible = "qcom,rpm-pm8953-regulators";
> +
> +		vdd_s1-supply = <&vph_pwr>;
> +		vdd_s2-supply = <&vph_pwr>;
> +		vdd_s3-supply = <&vph_pwr>;
> +		vdd_s4-supply = <&vph_pwr>;
> +		vdd_s5-supply = <&vph_pwr>;
> +		vdd_s6-supply = <&vph_pwr>;
> +		vdd_s7-supply = <&vph_pwr>;
> +		vdd_l1-supply = <&pm8953_s3>;
> +		vdd_l2_l3-supply = <&pm8953_s3>;
> +		vdd_l4_l5_l6_l7_l16_l19-supply = <&pm8953_s4>;
> +		vdd_l8_l11_l12_l13_l14_l15-supply = <&vph_pwr>;
> +		vdd_l9_l10_l17_l18_l22-supply = <&vph_pwr>;
> +		vdd_l23-supply = <&pm8953_s3>;
> +
> +		pm8953_s1: s1 {
> +			regulator-min-microvolt = <863000>;
> +			regulator-max-microvolt = <1152000>;
> +		};
> +
> +		pm8953_s3: s3 {
> +			regulator-min-microvolt = <1224000>;
> +			regulator-max-microvolt = <1224000>;
> +		};
> +
> +		pm8953_s4: s4 {
> +			regulator-min-microvolt = <1896000>;
> +			regulator-max-microvolt = <2048000>;
> +		};
> +
> +		pm8953_l1: l1 {
> +			regulator-min-microvolt = <1000000>;
> +			regulator-max-microvolt = <1100000>;
> +		};
> +
> +		pm8953_l2: l2 {
> +			regulator-min-microvolt = <975000>;
> +			regulator-max-microvolt = <1225000>;
> +		};
> +
> +		pm8953_l3: l3 {
> +			regulator-min-microvolt = <925000>;
> +			regulator-max-microvolt = <925000>;
> +			regulator-allow-set-load;
> +		};
> +
> +		pm8953_l5: l5 {
> +			regulator-min-microvolt = <1800000>;
> +			regulator-max-microvolt = <1800000>;
> +		};
> +
> +		pm8953_l6: l6 {
> +			regulator-min-microvolt = <1800000>;
> +			regulator-max-microvolt = <1800000>;
> +			regulator-always-on;
> +		};
> +
> +		pm8953_l7: l7 {
> +			regulator-min-microvolt = <1800000>;
> +			regulator-max-microvolt = <1900000>;
> +		};
> +
> +		pm8953_l8: l8 {
> +			regulator-min-microvolt = <2900000>;
> +			regulator-max-microvolt = <2900000>;
> +		};
> +
> +		pm8953_l9: l9 {
> +			regulator-min-microvolt = <3000000>;
> +			regulator-max-microvolt = <3300000>;
> +		};
> +
> +		pm8953_l10: l10 {
> +			regulator-min-microvolt = <2850000>;
> +			regulator-max-microvolt = <2850000>;
> +			regulator-always-on;
> +		};
> +
> +		pm8953_l11: l11 {
> +			regulator-min-microvolt = <2950000>;
> +			regulator-max-microvolt = <2950000>;
> +		};
> +
> +		pm8953_l12: l12 {
> +			regulator-min-microvolt = <1800000>;
> +			regulator-max-microvolt = <2950000>;
> +		};
> +
> +		pm8953_l13: l13 {
> +			regulator-min-microvolt = <3125000>;
> +			regulator-max-microvolt = <3125000>;
> +		};
> +
> +		pm8953_l16: l16 {
> +			regulator-min-microvolt = <1800000>;
> +			regulator-max-microvolt = <1800000>;
> +		};
> +
> +		pm8953_l17: l17 {
> +			regulator-min-microvolt = <2850000>;
> +			regulator-max-microvolt = <2850000>;
> +		};
> +
> +		pm8953_l19: l19 {
> +			regulator-min-microvolt = <1200000>;
> +			regulator-max-microvolt = <1350000>;
> +		};
> +
> +		pm8953_l22: l22 {
> +			regulator-min-microvolt = <2800000>;
> +			regulator-max-microvolt = <2850000>;
> +			regulator-always-on;
> +		};
> +
> +		pm8953_l23: l23 {
> +			regulator-min-microvolt = <975000>;
> +			regulator-max-microvolt = <1225000>;
> +		};
> +	};
> +};
> +
> +&sdhc_1 {
> +	vmmc-supply = <&pm8953_l8>;
> +	vqmmc-supply = <&pm8953_l5>;
> +
> +	status = "okay";
> +};
> +
> +&sdhc_2 {
> +	cd-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
> +
> +	pinctrl-names = "default", "sleep";
> +	pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
> +	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
> +
> +	vmmc-supply = <&pm8953_l11>;
> +	vqmmc-supply = <&pm8953_l12>;
> +
> +	status = "okay";
> +};
> +
> +&tlmm {
> +	gpio-reserved-ranges = <0 4>, <135 4>;
> +
> +	ts_int_active: ts-int-active-state {
> +		pins = "gpio65";
> +		function = "gpio";
> +		drive-strength = <8>;
> +		bias-pull-up;
> +	};
> +};
> +
> +&usb3 {
> +	status = "okay";
> +};
> +
> +&usb3_dwc3 {
> +	dr_mode = "peripheral";
> +};
  

Patch

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 158d1f19eba3..cd667df63326 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -23,6 +23,7 @@  dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-serranove.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-wingtech-wt88047.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8953-motorola-potter.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8953-xiaomi-daisy.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8953-xiaomi-mido.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8992-lg-bullhead-rev-10.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8992-lg-bullhead-rev-101.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8992-msft-lumia-octagon-talkman.dtb
diff --git a/arch/arm64/boot/dts/qcom/msm8953-xiaomi-mido.dts b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-mido.dts
new file mode 100644
index 000000000000..0304f0ec1350
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-mido.dts
@@ -0,0 +1,329 @@ 
+// SPDX-License-Identifier: BSD-3-Clause
+/dts-v1/;
+
+#include "msm8953.dtsi"
+#include "pm8953.dtsi"
+#include "pmi8950.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/delete-node/ &cont_splash_mem;
+/delete-node/ &qseecom_mem;
+
+/ {
+	model = "Xiaomi Redmi Note 4X";
+	compatible = "xiaomi,mido", "qcom,msm8953";
+	chassis-type = "handset";
+	qcom,msm-id = <293 0>;
+	qcom,board-id = <11 0>;
+
+	aliases {
+		mmc0 = &sdhc_1;
+		mmc1 = &sdhc_2;
+	};
+
+	speaker_amp: audio-amplifier {
+		compatible = "awinic,aw8738";
+		mode-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+		awinic,mode = <5>;
+		sound-name-prefix = "Speaker Amp";
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer@90001000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0x90001000 0 (1920 * 1080 * 3)>;
+
+			width = <1080>;
+			height = <1920>;
+			stride = <(1080 * 3)>;
+			format = "r8g8b8";
+
+			power-domains = <&gcc MDSS_GDSC>;
+
+			clocks = <&gcc GCC_MDSS_AHB_CLK>,
+				 <&gcc GCC_MDSS_AXI_CLK>,
+				 <&gcc GCC_MDSS_VSYNC_CLK>,
+				 <&gcc GCC_MDSS_MDP_CLK>,
+				 <&gcc GCC_MDSS_BYTE0_CLK>,
+				 <&gcc GCC_MDSS_PCLK0_CLK>,
+				 <&gcc GCC_MDSS_ESC0_CLK>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_key_default>;
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 85 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	reserved-memory {
+		qseecom_mem: qseecom@84a00000 {
+			reg = <0x0 0x84a00000 0x0 0x1900000>;
+			no-map;
+		};
+
+		cont_splash_mem: cont-splash@90001000 {
+			reg = <0x0 0x90001000 0x0 (1080 * 1920 * 3)>;
+			no-map;
+		};
+
+		ramoops@9ff00000 {
+			compatible = "ramoops";
+			reg = <0x0 0x9ff00000 0x0 0x00100000>;
+			console-size = <0x100000>;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&hsusb_phy {
+	vdd-supply = <&pm8953_l3>;
+	vdda-pll-supply = <&pm8953_l7>;
+	vdda-phy-dpdm-supply = <&pm8953_l13>;
+
+	status = "okay";
+};
+
+&i2c_2 {
+	status = "okay";
+
+	led-controller@45 {
+		compatible = "awinic,aw2013";
+		reg = <0x45>;
+
+		vcc-supply = <&pm8953_l10>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@0 {
+			reg = <0>;
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_INDICATOR;
+			led-max-microamp = <5000>;
+		};
+
+		led@1 {
+			reg = <1>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_INDICATOR;
+			led-max-microamp = <5000>;
+		};
+
+		led@2 {
+			reg = <2>;
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_INDICATOR;
+			led-max-microamp = <5000>;
+		};
+	};
+};
+
+&i2c_3 {
+	status = "okay";
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <65 IRQ_TYPE_EDGE_FALLING>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_active>;
+
+		reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
+
+		vcc-supply = <&pm8953_l10>;
+
+		touchscreen-size-x = <1080>;
+		touchscreen-size-y = <1920>;
+	};
+};
+
+&pm8953_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-pm8953-regulators";
+
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3-supply = <&vph_pwr>;
+		vdd_s4-supply = <&vph_pwr>;
+		vdd_s5-supply = <&vph_pwr>;
+		vdd_s6-supply = <&vph_pwr>;
+		vdd_s7-supply = <&vph_pwr>;
+		vdd_l1-supply = <&pm8953_s3>;
+		vdd_l2_l3-supply = <&pm8953_s3>;
+		vdd_l4_l5_l6_l7_l16_l19-supply = <&pm8953_s4>;
+		vdd_l8_l11_l12_l13_l14_l15-supply = <&vph_pwr>;
+		vdd_l9_l10_l17_l18_l22-supply = <&vph_pwr>;
+		vdd_l23-supply = <&pm8953_s3>;
+
+		pm8953_s1: s1 {
+			regulator-min-microvolt = <863000>;
+			regulator-max-microvolt = <1152000>;
+		};
+
+		pm8953_s3: s3 {
+			regulator-min-microvolt = <1224000>;
+			regulator-max-microvolt = <1224000>;
+		};
+
+		pm8953_s4: s4 {
+			regulator-min-microvolt = <1896000>;
+			regulator-max-microvolt = <2048000>;
+		};
+
+		pm8953_l1: l1 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1100000>;
+		};
+
+		pm8953_l2: l2 {
+			regulator-min-microvolt = <975000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8953_l3: l3 {
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <925000>;
+			regulator-allow-set-load;
+		};
+
+		pm8953_l5: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8953_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		pm8953_l7: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1900000>;
+		};
+
+		pm8953_l8: l8 {
+			regulator-min-microvolt = <2900000>;
+			regulator-max-microvolt = <2900000>;
+		};
+
+		pm8953_l9: l9 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8953_l10: l10 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+			regulator-always-on;
+		};
+
+		pm8953_l11: l11 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8953_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8953_l13: l13 {
+			regulator-min-microvolt = <3125000>;
+			regulator-max-microvolt = <3125000>;
+		};
+
+		pm8953_l16: l16 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8953_l17: l17 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8953_l19: l19 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8953_l22: l22 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2850000>;
+			regulator-always-on;
+		};
+
+		pm8953_l23: l23 {
+			regulator-min-microvolt = <975000>;
+			regulator-max-microvolt = <1225000>;
+		};
+	};
+};
+
+&sdhc_1 {
+	vmmc-supply = <&pm8953_l8>;
+	vqmmc-supply = <&pm8953_l5>;
+
+	status = "okay";
+};
+
+&sdhc_2 {
+	cd-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
+	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
+
+	vmmc-supply = <&pm8953_l11>;
+	vqmmc-supply = <&pm8953_l12>;
+
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>, <135 4>;
+
+	ts_int_active: ts-int-active-state {
+		pins = "gpio65";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&usb3_dwc3 {
+	dr_mode = "peripheral";
+};