diff mbox series

[07/15] tty: serial: qcom-geni-serial: remove unneeded tabs

Message ID	20221118122539.384993-8-brgl@bgdev.pl
State	New
Headers	Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20; From: Bartosz Golaszewski <brgl@bgdev.pl> To: Andy Gross <agross@kernel.org>, Bjorn Andersson <andersson@kernel.org>, Konrad Dybcio <konrad.dybcio@somainline.org>, Greg Kroah-Hartman <gregkh@linuxfoundation.org>, Jiri Slaby <jirislaby@kernel.org>, Srinivas Kandagatla <srinivas.kandagatla@linaro.org>, Vinod Koul <vkoul@kernel.org>, Alex Elder <elder@kernel.org> Cc: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, linux-serial@vger.kernel.org, Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Subject: [PATCH 07/15] tty: serial: qcom-geni-serial: remove unneeded tabs Date: Fri, 18 Nov 2022 13:25:31 +0100 Message-Id: <20221118122539.384993-8-brgl@bgdev.pl> In-Reply-To: <20221118122539.384993-1-brgl@bgdev.pl> References: <20221118122539.384993-1-brgl@bgdev.pl> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Precedence: bulk
Series	serial: qcom-geni-serial: implement support for SE DMA \| [00/15] serial: qcom-geni-serial: implement support for SE DMA [01/15] tty: serial: qcom-geni-serial: drop unneeded forward definitions [02/15] tty: serial: qcom-geni-serial: remove unused symbols [03/15] tty: serial: qcom-geni-serial: align #define values [04/15] tty: serial: qcom-geni-serial: simplify the to_dev_port() macro [05/15] tty: serial: qcom-geni-serial: remove stray newlines [06/15] tty: serial: qcom-geni-serial: refactor qcom_geni_serial_isr() [07/15] tty: serial: qcom-geni-serial: remove unneeded tabs [08/15] tty: serial: qcom-geni-serial: split out the FIFO tx code [09/15] tty: serial: qcom-geni-serial: drop the return value from handle_rx [10/15] tty: serial: qcom-geni-serial: use of_device_id data [11/15] tty: serial: qcom-geni-serial: stop operations in progress at shutdown [12/15] tty: serial: provide devm_uart_add_one_port() [13/15] tty: serial: qcom-geni-serial: use devres for uart port management [14/15] soc: qcom-geni-se: add more symbol definitions [15/15] tty: serial: qcom-geni-serial: add support for serial engine DMA

Commit Message

Bartosz Golaszewski Nov. 18, 2022, 12:25 p.m. UTC

  From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Remove redundant indentation in struct member assignment.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
---
 drivers/tty/serial/qcom_geni_serial.c | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

Comments

Konrad Dybcio Nov. 18, 2022, 1:25 p.m. UTC | #1

On 18/11/2022 13:25, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> 
> Remove redundant indentation in struct member assignment.
> 
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
>   drivers/tty/serial/qcom_geni_serial.c | 24 ++++++++++++------------
>   1 file changed, 12 insertions(+), 12 deletions(-)
> 
> diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
> index 22c1869c60f4..39041538e5d2 100644
> --- a/drivers/tty/serial/qcom_geni_serial.c
> +++ b/drivers/tty/serial/qcom_geni_serial.c
> @@ -138,26 +138,26 @@ static struct uart_driver qcom_geni_uart_driver;
>   static struct qcom_geni_serial_port qcom_geni_uart_ports[GENI_UART_PORTS] = {
>   	[0] = {
>   		.uport = {
> -				.iotype = UPIO_MEM,
> -				.ops = &qcom_geni_uart_pops,
> -				.flags = UPF_BOOT_AUTOCONF,
> -				.line = 0,
> +			.iotype = UPIO_MEM,
> +			.ops = &qcom_geni_uart_pops,
> +			.flags = UPF_BOOT_AUTOCONF,
> +			.line = 0,
>   		},
>   	},
>   	[1] = {
>   		.uport = {
> -				.iotype = UPIO_MEM,
> -				.ops = &qcom_geni_uart_pops,
> -				.flags = UPF_BOOT_AUTOCONF,
> -				.line = 1,
> +			.iotype = UPIO_MEM,
> +			.ops = &qcom_geni_uart_pops,
> +			.flags = UPF_BOOT_AUTOCONF,
> +			.line = 1,
>   		},
>   	},
>   	[2] = {
>   		.uport = {
> -				.iotype = UPIO_MEM,
> -				.ops = &qcom_geni_uart_pops,
> -				.flags = UPF_BOOT_AUTOCONF,
> -				.line = 2,
> +			.iotype = UPIO_MEM,
> +			.ops = &qcom_geni_uart_pops,
> +			.flags = UPF_BOOT_AUTOCONF,
> +			.line = 2,
>   		},
>   	},
>   };

diff mbox series

Patch

diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
index 22c1869c60f4..39041538e5d2 100644
--- a/drivers/tty/serial/qcom_geni_serial.c
+++ b/drivers/tty/serial/qcom_geni_serial.c
@@ -138,26 +138,26 @@  static struct uart_driver qcom_geni_uart_driver;
 static struct qcom_geni_serial_port qcom_geni_uart_ports[GENI_UART_PORTS] = {
 	[0] = {
 		.uport = {
-				.iotype = UPIO_MEM,
-				.ops = &qcom_geni_uart_pops,
-				.flags = UPF_BOOT_AUTOCONF,
-				.line = 0,
+			.iotype = UPIO_MEM,
+			.ops = &qcom_geni_uart_pops,
+			.flags = UPF_BOOT_AUTOCONF,
+			.line = 0,
 		},
 	},
 	[1] = {
 		.uport = {
-				.iotype = UPIO_MEM,
-				.ops = &qcom_geni_uart_pops,
-				.flags = UPF_BOOT_AUTOCONF,
-				.line = 1,
+			.iotype = UPIO_MEM,
+			.ops = &qcom_geni_uart_pops,
+			.flags = UPF_BOOT_AUTOCONF,
+			.line = 1,
 		},
 	},
 	[2] = {
 		.uport = {
-				.iotype = UPIO_MEM,
-				.ops = &qcom_geni_uart_pops,
-				.flags = UPF_BOOT_AUTOCONF,
-				.line = 2,
+			.iotype = UPIO_MEM,
+			.ops = &qcom_geni_uart_pops,
+			.flags = UPF_BOOT_AUTOCONF,
+			.line = 2,
 		},
 	},
 };