[v2,03/14] reset: Create subdirectory for StarFive drivers

  From: Emil Renner Berthing <kernel@esmil.dk>

This moves the StarFive JH7100 reset driver to a new subdirectory in
preparation for adding more StarFive reset drivers.

Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
---
 MAINTAINERS                                          | 4 ++--
 drivers/reset/Kconfig                                | 8 +-------
 drivers/reset/Makefile                               | 2 +-
 drivers/reset/starfive/Kconfig                       | 8 ++++++++
 drivers/reset/starfive/Makefile                      | 2 ++
 drivers/reset/{ => starfive}/reset-starfive-jh7100.c | 0
 6 files changed, 14 insertions(+), 10 deletions(-)
 create mode 100644 drivers/reset/starfive/Kconfig
 create mode 100644 drivers/reset/starfive/Makefile
 rename drivers/reset/{ => starfive}/reset-starfive-jh7100.c (100%)
  

On Fri, 18 Nov 2022 at 02:06, Hal Feng <hal.feng@starfivetech.com> wrote:
>
> From: Emil Renner Berthing <kernel@esmil.dk>
>
> This moves the StarFive JH7100 reset driver to a new subdirectory in
> preparation for adding more StarFive reset drivers.
>
> Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
> Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
> ---
>  MAINTAINERS                                          | 4 ++--
>  drivers/reset/Kconfig                                | 8 +-------
>  drivers/reset/Makefile                               | 2 +-
>  drivers/reset/starfive/Kconfig                       | 8 ++++++++
>  drivers/reset/starfive/Makefile                      | 2 ++
>  drivers/reset/{ => starfive}/reset-starfive-jh7100.c | 0
>  6 files changed, 14 insertions(+), 10 deletions(-)
>  create mode 100644 drivers/reset/starfive/Kconfig
>  create mode 100644 drivers/reset/starfive/Makefile
>  rename drivers/reset/{ => starfive}/reset-starfive-jh7100.c (100%)
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index d43daa89d5f1..e6f1060e7964 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -19613,11 +19613,11 @@ F:    Documentation/devicetree/bindings/pinctrl/starfive,jh7100-pinctrl.yaml
>  F:     drivers/pinctrl/starfive/
>  F:     include/dt-bindings/pinctrl/pinctrl-starfive-jh7100.h
>
> -STARFIVE JH7100 RESET CONTROLLER DRIVER
> +STARFIVE JH7100 RESET CONTROLLER DRIVERS
>  M:     Emil Renner Berthing <kernel@esmil.dk>
>  S:     Maintained
>  F:     Documentation/devicetree/bindings/reset/starfive,jh7100-reset.yaml
> -F:     drivers/reset/reset-starfive-jh7100.c
> +F:     drivers/reset/starfive/

When this entry covers all StarFive reset drivers the header should
also match. Eg.
STARFIVE RESET CONTROLLER DRIVERS

>  F:     include/dt-bindings/reset/starfive-jh7100.h
>
>  STATIC BRANCH/CALL
> diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
> index de176c2fbad9..1e8e1c4954cd 100644
> --- a/drivers/reset/Kconfig
> +++ b/drivers/reset/Kconfig
> @@ -232,13 +232,6 @@ config RESET_SOCFPGA
>           This enables the reset driver for the SoCFPGA ARMv7 platforms. This
>           driver gets initialized early during platform init calls.
>
> -config RESET_STARFIVE_JH7100
> -       bool "StarFive JH7100 Reset Driver"
> -       depends on SOC_STARFIVE || COMPILE_TEST
> -       default SOC_STARFIVE
> -       help
> -         This enables the reset controller driver for the StarFive JH7100 SoC.
> -
>  config RESET_SUNPLUS
>         bool "Sunplus SoCs Reset Driver" if COMPILE_TEST
>         default ARCH_SUNPLUS
> @@ -320,6 +313,7 @@ config RESET_ZYNQ
>         help
>           This enables the reset controller driver for Xilinx Zynq SoCs.
>
> +source "drivers/reset/starfive/Kconfig"
>  source "drivers/reset/sti/Kconfig"
>  source "drivers/reset/hisilicon/Kconfig"
>  source "drivers/reset/tegra/Kconfig"
> diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
> index 3e7e5fd633a8..fee17a0e3a16 100644
> --- a/drivers/reset/Makefile
> +++ b/drivers/reset/Makefile
> @@ -1,6 +1,7 @@
>  # SPDX-License-Identifier: GPL-2.0
>  obj-y += core.o
>  obj-y += hisilicon/
> +obj-$(CONFIG_SOC_STARFIVE) += starfive/
>  obj-$(CONFIG_ARCH_STI) += sti/
>  obj-$(CONFIG_ARCH_TEGRA) += tegra/
>  obj-$(CONFIG_RESET_A10SR) += reset-a10sr.o
> @@ -30,7 +31,6 @@ obj-$(CONFIG_RESET_RZG2L_USBPHY_CTRL) += reset-rzg2l-usbphy-ctrl.o
>  obj-$(CONFIG_RESET_SCMI) += reset-scmi.o
>  obj-$(CONFIG_RESET_SIMPLE) += reset-simple.o
>  obj-$(CONFIG_RESET_SOCFPGA) += reset-socfpga.o
> -obj-$(CONFIG_RESET_STARFIVE_JH7100) += reset-starfive-jh7100.o
>  obj-$(CONFIG_RESET_SUNPLUS) += reset-sunplus.o
>  obj-$(CONFIG_RESET_SUNXI) += reset-sunxi.o
>  obj-$(CONFIG_RESET_TI_SCI) += reset-ti-sci.o
> diff --git a/drivers/reset/starfive/Kconfig b/drivers/reset/starfive/Kconfig
> new file mode 100644
> index 000000000000..cddebdba7177
> --- /dev/null
> +++ b/drivers/reset/starfive/Kconfig
> @@ -0,0 +1,8 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +
> +config RESET_STARFIVE_JH7100
> +       bool "StarFive JH7100 Reset Driver"
> +       depends on SOC_STARFIVE || COMPILE_TEST
> +       default SOC_STARFIVE
> +       help
> +         This enables the reset controller driver for the StarFive JH7100 SoC.
> diff --git a/drivers/reset/starfive/Makefile b/drivers/reset/starfive/Makefile
> new file mode 100644
> index 000000000000..670d049423f5
> --- /dev/null
> +++ b/drivers/reset/starfive/Makefile
> @@ -0,0 +1,2 @@
> +# SPDX-License-Identifier: GPL-2.0
> +obj-$(CONFIG_RESET_STARFIVE_JH7100)            += reset-starfive-jh7100.o
> diff --git a/drivers/reset/reset-starfive-jh7100.c b/drivers/reset/starfive/reset-starfive-jh7100.c
> similarity index 100%
> rename from drivers/reset/reset-starfive-jh7100.c
> rename to drivers/reset/starfive/reset-starfive-jh7100.c
> --
> 2.38.1
>