From: Sam Shih <sam.shih@mediatek.com>
This patch adds mmc support for MT7986.
Signed-off-by: Sam Shih <sam.shih@mediatek.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
v3:
- fix pullups/pulldowns for mt7986a-rfb to have generic bias-pull-*
v2:
- update mmc-node because clocks changed
---
arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts | 87 ++++++++++++++++++++
arch/arm64/boot/dts/mediatek/mt7986a.dtsi | 15 ++++
2 files changed, 102 insertions(+)
@@ -5,6 +5,8 @@
*/
/dts-v1/;
+#include <dt-bindings/pinctrl/mt65xx.h>
+
#include "mt7986a.dtsi"
/ {
@@ -24,6 +26,15 @@ memory@40000000 {
reg = <0 0x40000000 0 0x40000000>;
};
+ reg_1p8v: regulator-1p8v {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "fixed-3.3V";
@@ -76,7 +87,83 @@ switch: switch@0 {
};
};
+&mmc0 {
+ pinctrl-names = "default", "state_uhs";
+ pinctrl-0 = <&mmc0_pins_default>;
+ pinctrl-1 = <&mmc0_pins_uhs>;
+ bus-width = <8>;
+ max-frequency = <200000000>;
+ cap-mmc-highspeed;
+ mmc-hs200-1_8v;
+ mmc-hs400-1_8v;
+ hs400-ds-delay = <0x14014>;
+ vmmc-supply = <®_3p3v>;
+ vqmmc-supply = <®_1p8v>;
+ non-removable;
+ no-sd;
+ no-sdio;
+ status = "okay";
+};
+
&pio {
+ mmc0_pins_default: mmc0-pins {
+ mux {
+ function = "emmc";
+ groups = "emmc_51";
+ };
+ conf-cmd-dat {
+ pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2",
+ "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5",
+ "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD";
+ input-enable;
+ drive-strength = <4>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */
+ };
+ conf-clk {
+ pins = "EMMC_CK";
+ drive-strength = <6>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */
+ };
+ conf-ds {
+ pins = "EMMC_DSL";
+ bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */
+ };
+ conf-rst {
+ pins = "EMMC_RSTB";
+ drive-strength = <4>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */
+ };
+ };
+
+ mmc0_pins_uhs: mmc0-uhs-pins {
+ mux {
+ function = "emmc";
+ groups = "emmc_51";
+ };
+ conf-cmd-dat {
+ pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2",
+ "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5",
+ "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD";
+ input-enable;
+ drive-strength = <4>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */
+ };
+ conf-clk {
+ pins = "EMMC_CK";
+ drive-strength = <6>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */
+ };
+ conf-ds {
+ pins = "EMMC_DSL";
+ bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */
+ };
+ conf-rst {
+ pins = "EMMC_RSTB";
+ drive-strength = <4>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */
+ };
+ };
+
spi_flash_pins: spi-flash-pins {
mux {
function = "spi";
@@ -304,6 +304,21 @@ ssusb: usb@11200000 {
status = "disabled";
};
+ mmc0: mmc@11230000 {
+ compatible = "mediatek,mt7986-mmc";
+ reg = <0 0x11230000 0 0x1000>,
+ <0 0x11c20000 0 0x1000>;
+ interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&topckgen CLK_TOP_EMMC_416M_SEL>,
+ <&infracfg CLK_INFRA_MSDC_HCK_CK>,
+ <&infracfg CLK_INFRA_MSDC_CK>,
+ <&infracfg CLK_INFRA_MSDC_133M_CK>,
+ <&infracfg CLK_INFRA_MSDC_66M_CK>;
+ clock-names = "source", "hclk", "source_cg", "bus_clk",
+ "sys_cg";
+ status = "disabled";
+ };
+
usb_phy: t-phy@11e10000 {
compatible = "mediatek,mt7986-tphy",
"mediatek,generic-tphy-v2";