[1/2] riscv: dts: microchip: remove pcie node from the sev kit
Commit Message
The SEV kit reference design does not hook up the PCIe root port to the
core complex including it is misleading.
The entry is a re-use mistake - I was not aware of this when I moved
the PCIe node out of mpfs.dtsi so that individual bistreams could
connect it to different fics etc.
Fixes: 978a17d1a688 ("riscv: dts: microchip: add sevkit device tree")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
---
.../dts/microchip/mpfs-sev-kit-fabric.dtsi | 29 -------------------
1 file changed, 29 deletions(-)
Comments
From: Conor Dooley <conor.dooley@microchip.com>
On Tue, 15 Nov 2022 15:25:46 +0000, Conor Dooley wrote:
> The SEV kit reference design does not hook up the PCIe root port to the
> core complex including it is misleading.
> The entry is a re-use mistake - I was not aware of this when I moved
> the PCIe node out of mpfs.dtsi so that individual bistreams could
> connect it to different fics etc.
>
>
> [...]
Applied to riscv-dt-for-next, thanks!
[1/2] riscv: dts: microchip: remove pcie node from the sev kit
https://git.kernel.org/conor/c/1150f4cff831
[2/2] riscv: dts: microchip: remove unused pcie clocks
https://git.kernel.org/conor/c/f4e700fd9466
Thanks,
Conor.
@@ -13,33 +13,4 @@ fabric_clk1: fabric-clk1 {
#clock-cells = <0>;
clock-frequency = <125000000>;
};
-
- pcie: pcie@2000000000 {
- compatible = "microchip,pcie-host-1.0";
- #address-cells = <0x3>;
- #interrupt-cells = <0x1>;
- #size-cells = <0x2>;
- device_type = "pci";
- reg = <0x20 0x0 0x0 0x8000000>, <0x0 0x43000000 0x0 0x10000>;
- reg-names = "cfg", "apb";
- bus-range = <0x0 0x7f>;
- interrupt-parent = <&plic>;
- interrupts = <119>;
- interrupt-map = <0 0 0 1 &pcie_intc 0>,
- <0 0 0 2 &pcie_intc 1>,
- <0 0 0 3 &pcie_intc 2>,
- <0 0 0 4 &pcie_intc 3>;
- interrupt-map-mask = <0 0 0 7>;
- clocks = <&fabric_clk1>, <&fabric_clk1>, <&fabric_clk3>;
- clock-names = "fic0", "fic1", "fic3";
- ranges = <0x3000000 0x0 0x8000000 0x20 0x8000000 0x0 0x80000000>;
- msi-parent = <&pcie>;
- msi-controller;
- status = "disabled";
- pcie_intc: interrupt-controller {
- #address-cells = <0>;
- #interrupt-cells = <1>;
- interrupt-controller;
- };
- };
};