diff mbox series

[clocksource,3/3] clocksource: Exponential backoff for load-induced bogus watchdog reads

Message ID 20221114232827.835599-3-paulmck@kernel.org
State New
Headers
Series Reject bogus watchdog clocksource measurements |

Commit Message

Paul E. McKenney Nov. 14, 2022, 11:28 p.m. UTC 
  The clocksource watchdog will reject measurements that are excessively
delayed, that is, by more than 1.5 seconds beyond the intended 0.5-second
watchdog interval.  On an extremely busy system, this can result in a
console message being printed every two seconds.  This is excessively
noisy for a non-error condition.

Therefore, apply exponential backoff to these messages.  This exponential
backoff is capped at 1024 times the watchdog interval, which comes to
not quite one message per ten minutes.

Please note that the bogus watchdog reads that occur when the watchdog
interval is less than 0.125 seconds are still printed unconditionally
because these likely correspond to a serious error condition in the
timer code or hardware.

[ paulmck: Apply Feng Tang feedback. ]
[ paulmck: Apply Waiman Long feedback. ]

Reported-by: Waiman Long <longman@redhat.com>
Reported-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Feng Tang <feng.tang@intel.com>
Reviewed-by: Waiman Long <longman@redhat.com>
Cc: John Stultz <jstultz@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Stephen Boyd <sboyd@kernel.org>
---
 include/linux/clocksource.h |  3 +++
 kernel/time/clocksource.c   | 31 +++++++++++++++++++++++++------
 2 files changed, 28 insertions(+), 6 deletions(-)
diff mbox series

Patch

diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h
index 1d42d4b173271..23b73f2293d6d 100644
--- a/include/linux/clocksource.h
+++ b/include/linux/clocksource.h
@@ -125,6 +125,9 @@  struct clocksource {
 	struct list_head	wd_list;
 	u64			cs_last;
 	u64			wd_last;
+	u64			wd_last_bogus;
+	int			wd_bogus_shift;
+	unsigned long		wd_bogus_count;
 #endif
 	struct module		*owner;
 };
diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c
index 3f5317faf891f..4015ec6503a52 100644
--- a/kernel/time/clocksource.c
+++ b/kernel/time/clocksource.c
@@ -442,14 +442,33 @@  static void clocksource_watchdog(struct timer_list *unused)
 
 		/* Check for bogus measurements. */
 		wdi = jiffies_to_nsecs(WATCHDOG_INTERVAL);
-		if (wd_nsec < (wdi >> 2)) {
-			/* This usually indicates broken timer code or hardware. */
-			pr_warn("timekeeping watchdog on CPU%d: Watchdog clocksource '%s' advanced only %lld ns during %d-jiffy time interval, skipping watchdog check.\n", smp_processor_id(), watchdog->name, wd_nsec, WATCHDOG_INTERVAL);
+		if (wd_nsec > (wdi << 2) || cs_nsec > (wdi << 2)) {
+			bool needwarn = false;
+			u64 wd_lb;
+
+			cs->wd_bogus_count++;
+			if (!cs->wd_bogus_shift) {
+				needwarn = true;
+			} else {
+				delta = clocksource_delta(wdnow, cs->wd_last_bogus, watchdog->mask);
+				wd_lb = clocksource_cyc2ns(delta, watchdog->mult, watchdog->shift);
+				if ((1 << cs->wd_bogus_shift) * wdi <= wd_lb)
+					needwarn = true;
+			}
+			if (needwarn) {
+				/* This can happen on busy systems, which can delay the watchdog. */
+				pr_warn("timekeeping watchdog on CPU%d: Watchdog clocksource '%s' advanced an excessive %lld ns during %d-jiffy time interval (%lu since last message), probable CPU overutilization, skipping watchdog check.\n", smp_processor_id(), watchdog->name, wd_nsec, WATCHDOG_INTERVAL, cs->wd_bogus_count);
+				cs->wd_last_bogus = wdnow;
+				if (cs->wd_bogus_shift < 10)
+					cs->wd_bogus_shift++;
+				cs->wd_bogus_count = 0;
+			}
 			continue;
 		}
-		if (wd_nsec > (wdi << 2)) {
-			/* This can happen on busy systems, which can delay the watchdog. */
-			pr_warn("timekeeping watchdog on CPU%d: Watchdog clocksource '%s' advanced an excessive %lld ns during %d-jiffy time interval, probable CPU overutilization, skipping watchdog check.\n", smp_processor_id(), watchdog->name, wd_nsec, WATCHDOG_INTERVAL);
+		/* Check too-short measurements second to handle wrap. */
+		if (wd_nsec < (wdi >> 2) || cs_nsec < (wdi >> 2)) {
+			/* This usually indicates broken timer code or hardware. */
+			pr_warn("timekeeping watchdog on CPU%d: Watchdog clocksource '%s' advanced only %lld ns during %d-jiffy time interval, skipping watchdog check.\n", smp_processor_id(), watchdog->name, wd_nsec, WATCHDOG_INTERVAL);
 			continue;
 		}