diff mbox series

[v2,3/3] pinctrl: qcom: spmi-gpio: add support for pm8550 & pmr735d gpio control

Message ID 20221114-narmstrong-sm8550-upstream-spmi-v2-3-b839bf2d558a@linaro.org
State New
Headers
Series qcom: add support for SPMI PMICs found on SM8550 platforms |

Commit Message

Neil Armstrong Nov. 18, 2022, 8:24 a.m. UTC 
  Add support for the pm8550, pm8550b, pm8550ve, pm8550vs, pmk8550 & pmr735d
gpio controllers providing GPIO control over SPMI.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 drivers/pinctrl/qcom/pinctrl-spmi-gpio.c | 6 ++++++
 1 file changed, 6 insertions(+)
diff mbox series

Patch

diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
index 8c31a8f6b7e4..d65c9f2ece73 100644
--- a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
+++ b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
@@ -1219,6 +1219,10 @@  static const struct of_device_id pmic_gpio_of_match[] = {
 	{ .compatible = "qcom,pm8350b-gpio", .data = (void *) 8 },
 	{ .compatible = "qcom,pm8350c-gpio", .data = (void *) 9 },
 	{ .compatible = "qcom,pm8450-gpio", .data = (void *) 4 },
+	{ .compatible = "qcom,pm8550-gpio", .data = (void *) 12 },
+	{ .compatible = "qcom,pm8550b-gpio", .data = (void *) 12 },
+	{ .compatible = "qcom,pm8550ve-gpio", .data = (void *) 8 },
+	{ .compatible = "qcom,pm8550vs-gpio", .data = (void *) 6 },
 	{ .compatible = "qcom,pm8916-gpio", .data = (void *) 4 },
 	{ .compatible = "qcom,pm8941-gpio", .data = (void *) 36 },
 	/* pm8950 has 8 GPIOs with holes on 3 */
@@ -1230,11 +1234,13 @@  static const struct of_device_id pmic_gpio_of_match[] = {
 	{ .compatible = "qcom,pmi8994-gpio", .data = (void *) 10 },
 	{ .compatible = "qcom,pmi8998-gpio", .data = (void *) 14 },
 	{ .compatible = "qcom,pmk8350-gpio", .data = (void *) 4 },
+	{ .compatible = "qcom,pmk8550-gpio", .data = (void *) 6 },
 	{ .compatible = "qcom,pmm8155au-gpio", .data = (void *) 10 },
 	/* pmp8074 has 12 GPIOs with holes on 1 and 12 */
 	{ .compatible = "qcom,pmp8074-gpio", .data = (void *) 12 },
 	{ .compatible = "qcom,pmr735a-gpio", .data = (void *) 4 },
 	{ .compatible = "qcom,pmr735b-gpio", .data = (void *) 4 },
+	{ .compatible = "qcom,pmr735d-gpio", .data = (void *) 2 },
 	/* pms405 has 12 GPIOs with holes on 1, 9, and 10 */
 	{ .compatible = "qcom,pms405-gpio", .data = (void *) 12 },
 	/* pmx55 has 11 GPIOs with holes on 3, 7, 10, 11 */