diff mbox series

regulator: qcom-rpmh: Fix PMR735a S3 regulator spec

Message ID 20221110210706.80301-1-konrad.dybcio@linaro.org
State New
Headers
Series regulator: qcom-rpmh: Fix PMR735a S3 regulator spec |

Commit Message

Konrad Dybcio Nov. 10, 2022, 9:07 p.m. UTC 
  PMR735a has a wider range than previously defined. Fix it.

Fixes: c4e5aa3dbee5 ("regulator: qcom-rpmh: Add PM7325/PMR735A regulator support")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 drivers/regulator/qcom-rpmh-regulator.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Konrad Dybcio Nov. 14, 2022, 4:07 p.m. UTC | #1 
On 10/11/2022 22:07, Konrad Dybcio wrote:
> PMR735a has a wider range than previously defined. Fix it.
>
> Fixes: c4e5aa3dbee5 ("regulator: qcom-rpmh: Add PM7325/PMR735A regulator support")
> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> ---

Leaving this in to avoid confusion:


Please note this is different to the recently merged patch (that one was
for the SMD regulator driver).


Konrad

>   drivers/regulator/qcom-rpmh-regulator.c | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/regulator/qcom-rpmh-regulator.c b/drivers/regulator/qcom-rpmh-regulator.c
> index 4158ff126a67..f90bcdeecea5 100644
> --- a/drivers/regulator/qcom-rpmh-regulator.c
> +++ b/drivers/regulator/qcom-rpmh-regulator.c
> @@ -1187,7 +1187,7 @@ static const struct rpmh_vreg_init_data pm7325_vreg_data[] = {
>   static const struct rpmh_vreg_init_data pmr735a_vreg_data[] = {
>   	RPMH_VREG("smps1",  "smp%s1",  &pmic5_ftsmps520, "vdd-s1"),
>   	RPMH_VREG("smps2",  "smp%s2",  &pmic5_ftsmps520, "vdd-s2"),
> -	RPMH_VREG("smps3",  "smp%s3",  &pmic5_hfsmps510, "vdd-s3"),
> +	RPMH_VREG("smps3",  "smp%s3",  &pmic5_hfsmps515, "vdd-s3"),
>   	RPMH_VREG("ldo1",   "ldo%s1",  &pmic5_nldo,      "vdd-l1-l2"),
>   	RPMH_VREG("ldo2",   "ldo%s2",  &pmic5_nldo,      "vdd-l1-l2"),
>   	RPMH_VREG("ldo3",   "ldo%s3",  &pmic5_nldo,      "vdd-l3"),
Mark Brown Nov. 16, 2022, 1:32 p.m. UTC | #2 
On Thu, 10 Nov 2022 22:07:05 +0100, Konrad Dybcio wrote:
> PMR735a has a wider range than previously defined. Fix it.
> 
> 

Applied to

   broonie/regulator.git for-next

Thanks!

[1/1] regulator: qcom-rpmh: Fix PMR735a S3 regulator spec
      commit: dd801b2265c81bf0c8b0b4b8f7c1e7bfed078403

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark
diff mbox series

Patch

diff --git a/drivers/regulator/qcom-rpmh-regulator.c b/drivers/regulator/qcom-rpmh-regulator.c
index 4158ff126a67..f90bcdeecea5 100644
--- a/drivers/regulator/qcom-rpmh-regulator.c
+++ b/drivers/regulator/qcom-rpmh-regulator.c
@@ -1187,7 +1187,7 @@  static const struct rpmh_vreg_init_data pm7325_vreg_data[] = {
 static const struct rpmh_vreg_init_data pmr735a_vreg_data[] = {
 	RPMH_VREG("smps1",  "smp%s1",  &pmic5_ftsmps520, "vdd-s1"),
 	RPMH_VREG("smps2",  "smp%s2",  &pmic5_ftsmps520, "vdd-s2"),
-	RPMH_VREG("smps3",  "smp%s3",  &pmic5_hfsmps510, "vdd-s3"),
+	RPMH_VREG("smps3",  "smp%s3",  &pmic5_hfsmps515, "vdd-s3"),
 	RPMH_VREG("ldo1",   "ldo%s1",  &pmic5_nldo,      "vdd-l1-l2"),
 	RPMH_VREG("ldo2",   "ldo%s2",  &pmic5_nldo,      "vdd-l1-l2"),
 	RPMH_VREG("ldo3",   "ldo%s3",  &pmic5_nldo,      "vdd-l3"),