diff mbox series

[V2,4/5] tty: serial: fsl_lpuart: disable Rx/Tx DMA in lpuart32_shutdown()

Message ID 20221110081728.10172-5-sherry.sun@nxp.com
State New
Headers
Series fsl_lpuart: improve Idle Line Interrupt and registers handle in .shutdown() |

Commit Message

Sherry Sun Nov. 10, 2022, 8:17 a.m. UTC 
  UARTBAUD_RDMAE and UARTBAUD_TDMAE are enabled in lpuart32_startup(), but
lpuart32_shutdown() not disable them, only free the dma ring buffer and
release the dma channels, so here disable the Rx/Tx DMA first in
lpuart32_shutdown().

Fixes: 42b68768e51b ("serial: fsl_lpuart: DMA support for 32-bit variant")
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
---
Changes in V2:
1. Split one patch into four smaller patches to improve the commit
messages and add Fixes tag as suggested by Ilpo.
---
 drivers/tty/serial/fsl_lpuart.c | 5 +++++
 1 file changed, 5 insertions(+)
diff mbox series

Patch

diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index a6f7b056d57b..c297be11422a 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -1769,6 +1769,11 @@  static void lpuart32_shutdown(struct uart_port *port)
 
 	spin_lock_irqsave(&port->lock, flags);
 
+	/* disable Rx/Tx DMA */
+	temp = lpuart32_read(port, UARTBAUD);
+	temp &= ~(UARTBAUD_TDMAE | UARTBAUD_RDMAE);
+	lpuart32_write(port, temp, UARTBAUD);
+
 	/* disable Rx/Tx and interrupts */
 	temp = lpuart32_read(port, UARTCTRL);
 	temp &= ~(UARTCTRL_TE | UARTCTRL_RE | UARTCTRL_ILIE |