[v2,2/3] arm: dts: nuvoton: npcm7xx: add sgpio node
Commit Message
Add the SGPIO controller to the NPCM750 devicetree
Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>
---
Changes for v2:
- modify dts node
---
arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi | 30 +++++++++++++++++++
1 file changed, 30 insertions(+)
Comments
On 08/11/2022 10:28, Jim Liu wrote:
> Add the SGPIO controller to the NPCM750 devicetree
>
> Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>
> ---
> Changes for v2:
> - modify dts node
> ---
> arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi | 30 +++++++++++++++++++
> 1 file changed, 30 insertions(+)
>
> diff --git a/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi b/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi
> index c7b5ef15b716..9cac60734b57 100644
> --- a/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi
> +++ b/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi
> @@ -330,6 +330,36 @@
> status = "disabled";
> };
>
> + sgpio1: sgpio@101000 {
Node names should be generic.
https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation
> + compatible = "nuvoton,npcm750-sgpio";
> + reg = <0x101000 0x200>;
> + clocks = <&clk NPCM7XX_CLK_APB3>;
> + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
> + bus-frequency = <16000000>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&iox1_pins>;
> + nin_gpios = <64>;
> + nout_gpios = <64>;
> + status = "disabled";
Why? What is missing from external resources?
> + };
> +
> + sgpio2: sgpio@102000 {
Node names should be generic.
https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation
> + compatible = "nuvoton,npcm750-sgpio";
> + reg = <0x102000 0x200>;
> + clocks = <&clk NPCM7XX_CLK_APB3>;
> + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
> + bus-frequency = <16000000>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&iox2_pins>;
> + nin_gpios = <64>;
> + nout_gpios = <64>;
> + status = "disabled";
Why? What is missing from external resources?
Best regards,
Krzysztof
@@ -330,6 +330,36 @@
status = "disabled";
};
+ sgpio1: sgpio@101000 {
+ compatible = "nuvoton,npcm750-sgpio";
+ reg = <0x101000 0x200>;
+ clocks = <&clk NPCM7XX_CLK_APB3>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+ bus-frequency = <16000000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&iox1_pins>;
+ nin_gpios = <64>;
+ nout_gpios = <64>;
+ status = "disabled";
+ };
+
+ sgpio2: sgpio@102000 {
+ compatible = "nuvoton,npcm750-sgpio";
+ reg = <0x102000 0x200>;
+ clocks = <&clk NPCM7XX_CLK_APB3>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ bus-frequency = <16000000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&iox2_pins>;
+ nin_gpios = <64>;
+ nout_gpios = <64>;
+ status = "disabled";
+ };
+
pwm_fan: pwm-fan-controller@103000 {
#address-cells = <1>;
#size-cells = <0>;