[2/2] MIPS: ingenic: rs90: set MMC_MUX clock

Message ID 20221108045300.2084671-3-lis8215@gmail.com
State New
Headers
Series mmc: jz4740: Don't change parent clock rate for some SoCs |

Commit Message

Siarhei Volkau Nov. 8, 2022, 4:53 a.m. UTC
  Since the MMC driver can't change the common MMC_MUX clock
anymore, the CGU shall configure that clock properly.

Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
---
 arch/mips/boot/dts/ingenic/rs90.dts | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
  

Patch

diff --git a/arch/mips/boot/dts/ingenic/rs90.dts b/arch/mips/boot/dts/ingenic/rs90.dts
index e8df70dd4..d874abaa6 100644
--- a/arch/mips/boot/dts/ingenic/rs90.dts
+++ b/arch/mips/boot/dts/ingenic/rs90.dts
@@ -295,8 +295,9 @@  partition@20000 {
 
 &cgu {
 	/* Use 32kHz oscillator as the parent of the RTC clock */
-	assigned-clocks = <&cgu JZ4725B_CLK_RTC>;
-	assigned-clock-parents = <&cgu JZ4725B_CLK_OSC32K>;
+	assigned-clocks = <&cgu JZ4725B_CLK_MMC_MUX>, <&cgu JZ4725B_CLK_RTC>;
+	assigned-clock-parents = <0>, <&cgu JZ4725B_CLK_OSC32K>;
+	assigned-clock-rates = <48000000>;
 };
 
 &tcu {