From patchwork Mon Nov 7 20:49:33 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Serge Semin X-Patchwork-Id: 16708 Return-Path: Delivered-To: ouuuleilei@gmail.com Received: by 2002:a5d:6687:0:0:0:0:0 with SMTP id l7csp2297931wru; Mon, 7 Nov 2022 13:11:24 -0800 (PST) X-Google-Smtp-Source: AMsMyM5vJZd0T3wR+h3itvNe0zn0CQf5JxZ0ubT2bEmn0uo73LJSK5iyKoE/mQbKluTJWr8B+UCl X-Received: by 2002:a17:907:7805:b0:780:24fd:c4e8 with SMTP id la5-20020a170907780500b0078024fdc4e8mr50245812ejc.78.1667855484699; Mon, 07 Nov 2022 13:11:24 -0800 (PST) ARC-Seal: i=1; a=rsa-sha256; t=1667855484; cv=none; d=google.com; s=arc-20160816; b=VkNwlTbFZ/OTTf8cSD17Oync6DG7YzXi9mPLTHXSror7CfgN52TT8aBbLmSlerm+w0 yC3yh+YatCOP6YT78dooRglpkWFNC5yPwADDptw6cu98e+vR+y0V0ovelR727qGRzmMN LRaX0N9ZgZl2jzJNAoiJhZQz0/31f/3N1gRE9Hff26C1NBqC8vYB05CtR4o6jpHX3k5F F6mn+HLaP/w5qW0PkbkvngoJMkXEv1OgHDbxchpWoVapIreYaiMsQhWNC8F3zXEOAARe FjctvVwzmoELCGwEF5WwICFhMI7tHzzrBo4QGZbO7lCqGiENeqovjmpnj/VnNex/MMwY eVNg== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:content-transfer-encoding:mime-version :references:in-reply-to:message-id:date:subject:cc:to:from :dkim-signature; bh=uRLTnCCX7XpZ5DoDwxW0kxnpERMIUhVSnQHfaYzKzH8=; b=V5UMXAqiAlWrlgzR3/dq5sfO8L48SruVxxDC2V2iqhLWKchwC5WuYqX53ESK/YPmQP nFKKeTY80qbaPdibHKHWx6bSG6fUHx8SosZCn5go6CJcGqE1nqgXh2TDsE5DbvGGD+0A FM5mN/tLPxG/+yFuoJnCJ70Le3e7SANehA5J73oCG9De4ml45uL2Bt4UK2MfNN6s7CFp o8SkB4ykOAhqbp6/9a4Ddw4lAXCnWm+8gaZShU1BI+XxmU55UyBW58LJbMQbwmWnH3MO GdHylT9c2cj8Oo+Z49qUHa26jYuuiEp+EPVHcxc/nXFK2juod4RBCE+GShEkWxDvQmyc NdGA== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@baikalelectronics.ru header.s=post header.b=WbB+PbCd; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=REJECT sp=REJECT dis=NONE) header.from=baikalelectronics.ru Received: from out1.vger.email (out1.vger.email. [2620:137:e000::1:20]) by mx.google.com with ESMTP id bd24-20020a056402207800b0045d4a88c735si8720054edb.220.2022.11.07.13.10.59; Mon, 07 Nov 2022 13:11:24 -0800 (PST) Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20; Authentication-Results: mx.google.com; dkim=pass header.i=@baikalelectronics.ru header.s=post header.b=WbB+PbCd; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=REJECT sp=REJECT dis=NONE) header.from=baikalelectronics.ru Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S233238AbiKGVKj (ORCPT + 99 others); Mon, 7 Nov 2022 16:10:39 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:55232 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S233235AbiKGVKV (ORCPT ); Mon, 7 Nov 2022 16:10:21 -0500 Received: from post.baikalelectronics.com (post.baikalelectronics.com [213.79.110.86]) by lindbergh.monkeyblade.net (Postfix) with ESMTP id 81E5432B93; Mon, 7 Nov 2022 13:07:20 -0800 (PST) Received: from post.baikalelectronics.com (localhost.localdomain [127.0.0.1]) by post.baikalelectronics.com (Proxmox) with ESMTP id 57D55E0EC7; Mon, 7 Nov 2022 23:50:34 +0300 (MSK) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d= baikalelectronics.ru; h=cc:cc:content-transfer-encoding :content-type:content-type:date:from:from:in-reply-to:message-id :mime-version:references:reply-to:subject:subject:to:to; s=post; bh=uRLTnCCX7XpZ5DoDwxW0kxnpERMIUhVSnQHfaYzKzH8=; b=WbB+PbCdhOMh NDGoaUcZduCuQQqUoQFY8RaJX/Vf38oAR2XmT1TBdgCKfrS6exznDK8f7VeMCWng IMKhhllKaOplv3oy1ZEVJtTTQ29vhlFLzLBICfsCQZOjOSn6JZrHTcBPt0BQr3U1 22LHUVo0jjBfSchsT8fWPlVeaHL0rEM= Received: from mail.baikal.int (mail.baikal.int [192.168.51.25]) by post.baikalelectronics.com (Proxmox) with ESMTP id 42216E0E1D; Mon, 7 Nov 2022 23:50:34 +0300 (MSK) Received: from localhost (192.168.168.10) by mail (192.168.51.25) with Microsoft SMTP Server (TLS) id 15.0.1395.4; Mon, 7 Nov 2022 23:50:33 +0300 From: Serge Semin To: Rob Herring , Rob Herring , Krzysztof Kozlowski , Bjorn Helgaas , Lorenzo Pieralisi , Cai Huoqing , Robin Murphy , Jingoo Han , Gustavo Pimentel , Lorenzo Pieralisi , =?utf-8?q?Krzysztof_Wilczy=C5=84?= =?utf-8?q?ski?= CC: Serge Semin , Serge Semin , Alexey Malahov , Pavel Parkhomenko , Frank Li , Manivannan Sadhasivam , caihuoqing , Vinod Koul , , , Subject: [PATCH v6 19/20] PCI: dwc: Introduce generic platform clocks and resets Date: Mon, 7 Nov 2022 23:49:33 +0300 Message-ID: <20221107204934.32655-20-Sergey.Semin@baikalelectronics.ru> X-Mailer: git-send-email 2.38.0 In-Reply-To: <20221107204934.32655-1-Sergey.Semin@baikalelectronics.ru> References: <20221107204934.32655-1-Sergey.Semin@baikalelectronics.ru> MIME-Version: 1.0 X-Originating-IP: [192.168.168.10] X-ClientProxiedBy: MAIL.baikal.int (192.168.51.25) To mail (192.168.51.25) X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,SPF_HELO_PASS,SPF_PASS autolearn=ham autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org X-getmail-retrieved-from-mailbox: =?utf-8?q?INBOX?= X-GMAIL-THRID: =?utf-8?q?1748873232503511930?= X-GMAIL-MSGID: =?utf-8?q?1748873232503511930?= Currently almost each platform driver uses its own resets and clocks naming in order to get the corresponding descriptors. It makes the code harder to maintain and comprehend especially seeing the DWC PCIe core main resets and clocks signals set hasn't changed much for about at least one major IP-core release. So in order to organize things around these signals we suggest to create a generic interface for them in accordance with the naming introduced in the DWC PCIe IP-core reference manual: Application clocks: - "dbi" - data bus interface clock (on some DWC PCIe platforms it's referred as "pclk", "pcie", "sys", "ahb", "cfg", "iface", "gio", "reg", "pcie_apb_sys"); - "mstr" - AXI-bus master interface clock (some DWC PCIe glue drivers refer to this clock as "port", "bus", "pcie_bus", "bus_master/master_bus/axi_m", "pcie_aclk"); - "slv" - AXI-bus slave interface clock (also called as "port", "bus", "pcie_bus", "bus_slave/slave_bus/axi_s", "pcie_aclk", "pcie_inbound_axi"). Core clocks: - "pipe" - core-PCS PIPE interface clock coming from external PHY (it's normally named by the platform drivers as just "pipe"); - "core" - primary clock of the controller (none of the platform drivers declare such a clock but in accordance with the ref. manual the devices may have it separately specified); - "aux" - auxiliary PMC domain clock (it is named by some platforms as "pcie_aux" and just "aux"); - "ref" - Generic reference clock (it is a generic clock source, which can be used as a signal source for multiple interfaces, some platforms call it as "ref", "general", "pcie_phy", "pcie_phy_ref"). Application resets: - "dbi" - Data-bus interface reset (it's CSR interface clock and is normally called as "apb" though technically it's not APB but DWC PCIe-specific interface); - "mstr" - AXI-bus master reset (some platforms call it as "port", "apps", "bus", "axi_m"); - "slv" - ABI-bus slave reset (some platforms call it as "port", "apps", "bus", "axi_s"). Core resets: - "non-sticky" - non-sticky CSR flags reset; - "sticky" - sticky CSR flags reset; - "pipe" - PIPE-interface (Core-PCS) logic reset (some platforms call it just "pipe"); - "core" - controller primary reset (resets everything except PMC module, some platforms refer to this signal as "soft", "pci"); - "phy" - PCS/PHY block reset (strictly speaking it is normally connected to the input of an external block, but the reference manual says it must be available for the PMC working correctly, some existing platforms call it "pciephy", "phy", "link"); - "hot" - PMC hot reset signal (also called as "sleep"); - "pwr" - cold reset signal (can be referred as "pwr", "turnoff"). Bus reset: - "perst" - PCIe standard signal used to reset the PCIe peripheral devices. As you can see each platform uses it's own naming for basically the same set of the signals. In the framework of this commit we suggest to add a set of the clocks and reset signals resources, corresponding names and identifiers for each denoted entity. At current stage the platforms will be able to use the provided infrastructure to automatically request all these resources and manipulate with them in the Host/EP init callbacks. Alas it isn't that easy to create a common cold/hot reset procedure due to too many platform-specifics in the procedure, like the external flags exposure and the delays requirement. Signed-off-by: Serge Semin --- Changelog v3: - Add a method to at least request the generic clocks and resets. (@Rob) - Add GPIO-based PERST# signal support. --- drivers/pci/controller/dwc/pcie-designware.c | 91 ++++++++++++++++++++ drivers/pci/controller/dwc/pcie-designware.h | 42 +++++++++ 2 files changed, 133 insertions(+) diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c index d31f9d41d5cb..1e06ccf2dc9e 100644 --- a/drivers/pci/controller/dwc/pcie-designware.c +++ b/drivers/pci/controller/dwc/pcie-designware.c @@ -10,7 +10,9 @@ #include #include +#include #include +#include #include #include #include @@ -20,11 +22,89 @@ #include "../../pci.h" #include "pcie-designware.h" +static const char * const dw_pcie_app_clks[DW_PCIE_NUM_APP_CLKS] = { + [DW_PCIE_DBI_CLK] = "dbi", + [DW_PCIE_MSTR_CLK] = "mstr", + [DW_PCIE_SLV_CLK] = "slv", +}; + +static const char * const dw_pcie_core_clks[DW_PCIE_NUM_CORE_CLKS] = { + [DW_PCIE_PIPE_CLK] = "pipe", + [DW_PCIE_CORE_CLK] = "core", + [DW_PCIE_AUX_CLK] = "aux", + [DW_PCIE_REF_CLK] = "ref", +}; + +static const char * const dw_pcie_app_rsts[DW_PCIE_NUM_APP_RSTS] = { + [DW_PCIE_DBI_RST] = "dbi", + [DW_PCIE_MSTR_RST] = "mstr", + [DW_PCIE_SLV_RST] = "slv", +}; + +static const char * const dw_pcie_core_rsts[DW_PCIE_NUM_CORE_RSTS] = { + [DW_PCIE_NON_STICKY_RST] = "non-sticky", + [DW_PCIE_STICKY_RST] = "sticky", + [DW_PCIE_CORE_RST] = "core", + [DW_PCIE_PIPE_RST] = "pipe", + [DW_PCIE_PHY_RST] = "phy", + [DW_PCIE_HOT_RST] = "hot", + [DW_PCIE_PWR_RST] = "pwr", +}; + +static int dw_pcie_get_clocks(struct dw_pcie *pci) +{ + int i, ret; + + for (i = 0; i < DW_PCIE_NUM_APP_CLKS; i++) + pci->app_clks[i].id = dw_pcie_app_clks[i]; + + for (i = 0; i < DW_PCIE_NUM_CORE_CLKS; i++) + pci->core_clks[i].id = dw_pcie_core_clks[i]; + + ret = devm_clk_bulk_get_optional(pci->dev, DW_PCIE_NUM_APP_CLKS, + pci->app_clks); + if (ret) + return ret; + + return devm_clk_bulk_get_optional(pci->dev, DW_PCIE_NUM_CORE_CLKS, + pci->core_clks); +} + +static int dw_pcie_get_resets(struct dw_pcie *pci) +{ + int i, ret; + + for (i = 0; i < DW_PCIE_NUM_APP_RSTS; i++) + pci->app_rsts[i].id = dw_pcie_app_rsts[i]; + + for (i = 0; i < DW_PCIE_NUM_CORE_RSTS; i++) + pci->core_rsts[i].id = dw_pcie_core_rsts[i]; + + ret = devm_reset_control_bulk_get_optional_shared(pci->dev, + DW_PCIE_NUM_APP_RSTS, + pci->app_rsts); + if (ret) + return ret; + + ret = devm_reset_control_bulk_get_optional_exclusive(pci->dev, + DW_PCIE_NUM_CORE_RSTS, + pci->core_rsts); + if (ret) + return ret; + + pci->pe_rst = devm_gpiod_get_optional(pci->dev, "reset", GPIOD_OUT_HIGH); + if (IS_ERR(pci->pe_rst)) + return PTR_ERR(pci->pe_rst); + + return 0; +} + int dw_pcie_get_resources(struct dw_pcie *pci) { struct platform_device *pdev = to_platform_device(pci->dev); struct device_node *np = dev_of_node(pci->dev); struct resource *res; + int ret; if (!pci->dbi_base) { res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dbi"); @@ -62,6 +142,17 @@ int dw_pcie_get_resources(struct dw_pcie *pci) if (!pci->atu_size) pci->atu_size = SZ_4K; + /* LLDD is supposed to manually switch the clocks and resets state */ + if (dw_pcie_cap_is(pci, REQ_RES)) { + ret = dw_pcie_get_clocks(pci); + if (ret) + return ret; + + ret = dw_pcie_get_resets(pci); + if (ret) + return ret; + } + if (pci->link_gen < 1) pci->link_gen = of_pci_get_max_link_speed(np); diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h index 081f169e6021..393dfb931df6 100644 --- a/drivers/pci/controller/dwc/pcie-designware.h +++ b/drivers/pci/controller/dwc/pcie-designware.h @@ -13,10 +13,13 @@ #include #include +#include #include +#include #include #include #include +#include #include #include @@ -45,6 +48,7 @@ __dw_pcie_ver_cmp(_pci, TYPE_ ## _type, >=)) /* DWC PCIe controller capabilities */ +#define DW_PCIE_CAP_REQ_RES 0 #define DW_PCIE_CAP_IATU_UNROLL 1 #define DW_PCIE_CAP_CDM_CHECK 2 @@ -233,6 +237,39 @@ enum dw_pcie_device_mode { DW_PCIE_RC_TYPE, }; +enum dw_pcie_app_clk { + DW_PCIE_DBI_CLK, + DW_PCIE_MSTR_CLK, + DW_PCIE_SLV_CLK, + DW_PCIE_NUM_APP_CLKS +}; + +enum dw_pcie_core_clk { + DW_PCIE_PIPE_CLK, + DW_PCIE_CORE_CLK, + DW_PCIE_AUX_CLK, + DW_PCIE_REF_CLK, + DW_PCIE_NUM_CORE_CLKS +}; + +enum dw_pcie_app_rst { + DW_PCIE_DBI_RST, + DW_PCIE_MSTR_RST, + DW_PCIE_SLV_RST, + DW_PCIE_NUM_APP_RSTS +}; + +enum dw_pcie_core_rst { + DW_PCIE_NON_STICKY_RST, + DW_PCIE_STICKY_RST, + DW_PCIE_CORE_RST, + DW_PCIE_PIPE_RST, + DW_PCIE_PHY_RST, + DW_PCIE_HOT_RST, + DW_PCIE_PWR_RST, + DW_PCIE_NUM_CORE_RSTS +}; + struct dw_pcie_host_ops { int (*host_init)(struct dw_pcie_rp *pp); void (*host_deinit)(struct dw_pcie_rp *pp); @@ -332,6 +369,11 @@ struct dw_pcie { int num_lanes; int link_gen; u8 n_fts[2]; + struct clk_bulk_data app_clks[DW_PCIE_NUM_APP_CLKS]; + struct clk_bulk_data core_clks[DW_PCIE_NUM_CORE_CLKS]; + struct reset_control_bulk_data app_rsts[DW_PCIE_NUM_APP_RSTS]; + struct reset_control_bulk_data core_rsts[DW_PCIE_NUM_CORE_RSTS]; + struct gpio_desc *pe_rst; }; #define to_dw_pcie_from_pp(port) container_of((port), struct dw_pcie, pp)