diff mbox series

[02/11] arm64: dts: qcom: msm/apq8x96-*: Fix up comments

Message ID 20221107145522.6706-3-konrad.dybcio@linaro.org
State New
Headers
Series [01/11] arm64: dts: qcom: msm/apq8x16-*: Fix up comments |

Commit Message

Konrad Dybcio Nov. 7, 2022, 2:55 p.m. UTC 
  Switch '//' comments to C-style /* */ and fix up the contents of some.
Make sure all multiline C-style commends begin with just '/*' with
the comment text starting on a new line.
Also, fix up a single raw '2' to PM8994_GPIO_S4 while at it.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 arch/arm64/boot/dts/qcom/apq8096-db820c.dts | 14 +++++++-------
 arch/arm64/boot/dts/qcom/msm8996.dtsi       |  3 ++-
 2 files changed, 9 insertions(+), 8 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
index 7f10372178d6..6ad7e5c78ae1 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
@@ -560,7 +560,7 @@  pinconf {
 			pins = "gpio5";
 			function = PMIC_GPIO_FUNC_NORMAL;
 			output-low;
-			power-source = <2>; // PM8994_GPIO_S4, 1.8V
+			power-source = <PM8994_GPIO_S4>; /* 1.8V */
 		};
 	};
 
@@ -569,7 +569,7 @@  pinconf {
 			pins = "gpio19";
 			function = PMIC_GPIO_FUNC_NORMAL;
 			output-low;
-			power-source = <PM8994_GPIO_S4>; // 1.8V
+			power-source = <PM8994_GPIO_S4>; /* 1.8V */
 			qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
 			bias-pull-down;
 		};
@@ -580,7 +580,7 @@  pinconf {
 			pins = "gpio8";
 			function = PMIC_GPIO_FUNC_NORMAL;
 			output-low;
-			power-source = <PM8994_GPIO_S4>; // 1.8V
+			power-source = <PM8994_GPIO_S4>; /* 1.8V */
 			qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
 			bias-pull-down;
 		};
@@ -590,7 +590,7 @@  audio_mclk: clk-div1-state {
 		pinconf {
 			pins = "gpio15";
 			function = "func1";
-			power-source = <PM8994_GPIO_S4>; // 1.8V
+			power-source = <PM8994_GPIO_S4>; /* 1.8V */
 		};
 	};
 
@@ -602,7 +602,7 @@  pinconf {
 			drive-push-pull;
 			bias-pull-up;
 			qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
-			power-source = <PM8994_GPIO_S4>; // 1.8V
+			power-source = <PM8994_GPIO_S4>; /* 1.8V */
 		};
 	};
 
@@ -623,7 +623,7 @@  pinconf {
 			input-enable;
 			bias-pull-down;
 			qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
-			power-source = <PM8994_GPIO_S4>; // 1.8V
+			power-source = <PM8994_GPIO_S4>; /* 1.8V */
 		};
 	};
 };
@@ -679,7 +679,7 @@  pinconf {
 			input-enable;
 			bias-pull-down;
 			qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
-			power-source = <PM8994_GPIO_S4>; // 1.8V
+			power-source = <PM8994_GPIO_S4>; /* 1.8V */
 		};
 	};
 };
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index df0f67c223bb..4dccde54dd2f 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -1,5 +1,6 @@ 
 // SPDX-License-Identifier: GPL-2.0-only
-/* Copyright (c) 2014-2015, The Linux Foundation. All rights reserved.
+/*
+ * Copyright (c) 2014-2015, The Linux Foundation. All rights reserved.
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>