diff mbox series

[3/3] arm64: dts: qcom: hk01: use GPIO flags for tlmm

Message ID 20221107092930.33325-3-robimarko@gmail.com
State New
Headers
Series [1/3] arm64: dts: qcom: hk10: use "okay" instead of "ok" |

Commit Message

Robert Marko Nov. 7, 2022, 9:29 a.m. UTC 
  Use respective GPIO_ACTIVE_LOW/HIGH flags for tlmm GPIOs instead of
harcoding the cell value.

Signed-off-by: Robert Marko <robimarko@gmail.com>
---
 arch/arm64/boot/dts/qcom/ipq8074-hk01.dts | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

Comments

Konrad Dybcio Nov. 7, 2022, 9:58 a.m. UTC | #1 
On 07/11/2022 10:29, Robert Marko wrote:
> Use respective GPIO_ACTIVE_LOW/HIGH flags for tlmm GPIOs instead of
> harcoding the cell value.
> 
> Signed-off-by: Robert Marko <robimarko@gmail.com>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
>   arch/arm64/boot/dts/qcom/ipq8074-hk01.dts | 5 +++--
>   1 file changed, 3 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
> index b60b2d4c2ea5..c3f3f78271e9 100644
> --- a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
> +++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
> @@ -4,6 +4,7 @@
>    */
>   #include "ipq8074.dtsi"
>   #include "pmp8074.dtsi"
> +#include <dt-bindings/gpio/gpio.h>
>   
>   / {
>   	model = "Qualcomm Technologies, Inc. IPQ8074-HK01";
> @@ -52,12 +53,12 @@ &blsp1_uart5 {
>   
>   &pcie0 {
>   	status = "okay";
> -	perst-gpios = <&tlmm 61 0x1>;
> +	perst-gpios = <&tlmm 61 GPIO_ACTIVE_LOW>;
>   };
>   
>   &pcie1 {
>   	status = "okay";
> -	perst-gpios = <&tlmm 58 0x1>;
> +	perst-gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
>   };
>   
>   &pcie_phy0 {
Krzysztof Kozlowski Nov. 7, 2022, 10:31 a.m. UTC | #2 
On 07/11/2022 10:29, Robert Marko wrote:
> Use respective GPIO_ACTIVE_LOW/HIGH flags for tlmm GPIOs instead of
> harcoding the cell value.
> 
> Signed-off-by: Robert Marko <robimarko@gmail.com>
> ---

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
index b60b2d4c2ea5..c3f3f78271e9 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
+++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
@@ -4,6 +4,7 @@ 
  */
 #include "ipq8074.dtsi"
 #include "pmp8074.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "Qualcomm Technologies, Inc. IPQ8074-HK01";
@@ -52,12 +53,12 @@  &blsp1_uart5 {
 
 &pcie0 {
 	status = "okay";
-	perst-gpios = <&tlmm 61 0x1>;
+	perst-gpios = <&tlmm 61 GPIO_ACTIVE_LOW>;
 };
 
 &pcie1 {
 	status = "okay";
-	perst-gpios = <&tlmm 58 0x1>;
+	perst-gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
 };
 
 &pcie_phy0 {