diff mbox series

[1/3] arm64: dts: qcom: hk10: use "okay" instead of "ok"

Message ID 20221107092930.33325-1-robimarko@gmail.com
State New
Headers
Series [1/3] arm64: dts: qcom: hk10: use "okay" instead of "ok" |

Commit Message

Robert Marko Nov. 7, 2022, 9:29 a.m. UTC 
  Use "okay" instead of "ok" in USB nodes as "ok" is deprecated.

Signed-off-by: Robert Marko <robimarko@gmail.com>
---
 arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

Comments

Konrad Dybcio Nov. 7, 2022, 9:53 a.m. UTC | #1 
On 07/11/2022 10:29, Robert Marko wrote:
> Use "okay" instead of "ok" in USB nodes as "ok" is deprecated.
> 
> Signed-off-by: Robert Marko <robimarko@gmail.com>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
>   arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi | 16 ++++++++--------
>   1 file changed, 8 insertions(+), 8 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi b/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi
> index db4b87944cdf..262b937e0bc6 100644
> --- a/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi
> +++ b/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi
> @@ -22,7 +22,7 @@ memory {
>   };
>   
>   &blsp1_spi1 {
> -	status = "ok";
> +	status = "okay";
>   
>   	flash@0 {
>   		#address-cells = <1>;
> @@ -34,33 +34,33 @@ flash@0 {
>   };
>   
>   &blsp1_uart5 {
> -	status = "ok";
> +	status = "okay";
>   };
>   
>   &pcie0 {
> -	status = "ok";
> +	status = "okay";
>   	perst-gpios = <&tlmm 58 0x1>;
>   };
>   
>   &pcie1 {
> -	status = "ok";
> +	status = "okay";
>   	perst-gpios = <&tlmm 61 0x1>;
>   };
>   
>   &pcie_phy0 {
> -	status = "ok";
> +	status = "okay";
>   };
>   
>   &pcie_phy1 {
> -	status = "ok";
> +	status = "okay";
>   };
>   
>   &qpic_bam {
> -	status = "ok";
> +	status = "okay";
>   };
>   
>   &qpic_nand {
> -	status = "ok";
> +	status = "okay";
>   
>   	nand@0 {
>   		reg = <0>;
Krzysztof Kozlowski Nov. 7, 2022, 10:31 a.m. UTC | #2 
On 07/11/2022 10:29, Robert Marko wrote:
> Use "okay" instead of "ok" in USB nodes as "ok" is deprecated.
> 
> Signed-off-by: Robert Marko <robimarko@gmail.com>
> ---
>  arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi | 16 ++++++++--------
>  1 file changed, 8 insertions(+), 8 deletions(-)


Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof
Bjorn Andersson Nov. 8, 2022, 1:27 a.m. UTC | #3 
On Mon, 7 Nov 2022 10:29:28 +0100, Robert Marko wrote:
> Use "okay" instead of "ok" in USB nodes as "ok" is deprecated.
> 
> 

Applied, thanks!

[1/3] arm64: dts: qcom: hk10: use "okay" instead of "ok"
      commit: 7284a3943909606016128b79fb18dd107bc0fe26
[2/3] arm64: dts: qcom: hk10: use GPIO flags for tlmm
      commit: 3f49bdaf6f84959bb8fc3ed5add7983907491240
[3/3] arm64: dts: qcom: hk01: use GPIO flags for tlmm
      commit: 1bc6b7f26bc72c8fd5a49ff000bb76a234e75e11

Best regards,
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi b/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi
index db4b87944cdf..262b937e0bc6 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi
@@ -22,7 +22,7 @@  memory {
 };
 
 &blsp1_spi1 {
-	status = "ok";
+	status = "okay";
 
 	flash@0 {
 		#address-cells = <1>;
@@ -34,33 +34,33 @@  flash@0 {
 };
 
 &blsp1_uart5 {
-	status = "ok";
+	status = "okay";
 };
 
 &pcie0 {
-	status = "ok";
+	status = "okay";
 	perst-gpios = <&tlmm 58 0x1>;
 };
 
 &pcie1 {
-	status = "ok";
+	status = "okay";
 	perst-gpios = <&tlmm 61 0x1>;
 };
 
 &pcie_phy0 {
-	status = "ok";
+	status = "okay";
 };
 
 &pcie_phy1 {
-	status = "ok";
+	status = "okay";
 };
 
 &qpic_bam {
-	status = "ok";
+	status = "okay";
 };
 
 &qpic_nand {
-	status = "ok";
+	status = "okay";
 
 	nand@0 {
 		reg = <0>;