[v2,2/4] dt-bindings: display: sun6i-dsi: Add the A100 variant
Commit Message
The "40nm" MIPI DSI controller found in the A100 and D1 SoCs has the
same register layout as previous SoC integrations. However, its module
clock now comes from the TCON, which means it no longer runs at a fixed
rate, so this needs to be distinguished in the driver.
The controller also now uses pins on Port D instead of dedicated pins,
so it drops the separate power domain.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
---
Removal of the vcc-dsi-supply is maybe a bit questionable. Since there
is no "VCC-DSI" pin anymore, it's not obvious which pin actually does
power the DSI controller/PHY. Possibly power comes from VCC-PD or VCC-IO
or VCC-LVDS. So far, all boards have all of these as always-on supplies,
so it is hard to test.
(no changes since v1)
.../display/allwinner,sun6i-a31-mipi-dsi.yaml | 28 +++++++++++++++----
1 file changed, 23 insertions(+), 5 deletions(-)
@@ -12,9 +12,14 @@ maintainers:
properties:
compatible:
- enum:
- - allwinner,sun6i-a31-mipi-dsi
- - allwinner,sun50i-a64-mipi-dsi
+ oneOf:
+ - enum:
+ - allwinner,sun6i-a31-mipi-dsi
+ - allwinner,sun50i-a64-mipi-dsi
+ - allwinner,sun50i-a100-mipi-dsi
+ - items:
+ - const: allwinner,sun20i-d1-mipi-dsi
+ - const: allwinner,sun50i-a100-mipi-dsi
reg:
maxItems: 1
@@ -59,7 +64,6 @@ required:
- phys
- phy-names
- resets
- - vcc-dsi-supply
- port
allOf:
@@ -68,7 +72,9 @@ allOf:
properties:
compatible:
contains:
- const: allwinner,sun6i-a31-mipi-dsi
+ enum:
+ - allwinner,sun6i-a31-mipi-dsi
+ - allwinner,sun50i-a100-mipi-dsi
then:
properties:
@@ -83,6 +89,18 @@ allOf:
clocks:
maxItems: 1
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - allwinner,sun6i-a31-mipi-dsi
+ - allwinner,sun50i-a64-mipi-dsi
+
+ then:
+ required:
+ - vcc-dsi-supply
+
unevaluatedProperties: false
examples: