[v8,1/6] dt-bindings: media: Add Allwinner A31 ISP bindings documentation
Commit Message
This introduces YAML bindings documentation for the Allwinner A31 Image
Signal Processor (ISP).
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
.../media/allwinner,sun6i-a31-isp.yaml | 101 ++++++++++++++++++
1 file changed, 101 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/allwinner,sun6i-a31-isp.yaml
new file mode 100644
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/allwinner,sun6i-a31-isp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A31 Image Signal Processor Driver (ISP) Device Tree Bindings
+
+maintainers:
+ - Paul Kocialkowski <paul.kocialkowski@bootlin.com>
+
+properties:
+ compatible:
+ enum:
+ - allwinner,sun6i-a31-isp
+ - allwinner,sun8i-v3s-isp
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: Bus Clock
+ - description: Module Clock
+ - description: DRAM Clock
+
+ clock-names:
+ items:
+ - const: bus
+ - const: mod
+ - const: ram
+
+ resets:
+ maxItems: 1
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: CSI0 input port
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: CSI1 input port
+
+ if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - allwinner,sun8i-v3s-isp
+ then:
+ required:
+ - port@0
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - resets
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/sun8i-v3s-ccu.h>
+ #include <dt-bindings/reset/sun8i-v3s-ccu.h>
+
+ isp: isp@1cb8000 {
+ compatible = "allwinner,sun8i-v3s-isp";
+ reg = <0x01cb8000 0x1000>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_CSI>,
+ <&ccu CLK_CSI1_SCLK>,
+ <&ccu CLK_DRAM_CSI>;
+ clock-names = "bus", "mod", "ram";
+ resets = <&ccu RST_BUS_CSI>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ isp_in_csi0: endpoint {
+ remote-endpoint = <&csi0_out_isp>;
+ };
+ };
+ };
+ };
+
+...