[v4,03/12] arm64: dts: qcom: sc8280xp-pmics: Add thermal zones for PM8280_{1/2} PMICs
Commit Message
Add thermal zones for the PM8280_{1/2} PMICs by using the temperature
alarm blocks as the thermal sensors. Temperature trip points are
inherited from PM8350 PMIC.
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi | 44 ++++++++++++++++++++
1 file changed, 44 insertions(+)
@@ -7,6 +7,50 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/spmi/spmi.h>
+/ {
+ thermal-zones {
+ pm8280_1_thermal: pm8280-1-thermal {
+ polling-delay-passive = <100>;
+ polling-delay = <0>;
+ thermal-sensors = <&pm8280_1_temp_alarm>;
+
+ trips {
+ trip0 {
+ temperature = <95000>;
+ hysteresis = <0>;
+ type = "passive";
+ };
+
+ trip1 {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ pm8280_2_thermal: pm8280-2-thermal {
+ polling-delay-passive = <100>;
+ polling-delay = <0>;
+ thermal-sensors = <&pm8280_2_temp_alarm>;
+
+ trips {
+ trip0 {
+ temperature = <95000>;
+ hysteresis = <0>;
+ type = "passive";
+ };
+
+ trip1 {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+ };
+};
+
&spmi_bus {
pmk8280: pmic@0 {
compatible = "qcom,pmk8350", "qcom,spmi-pmic";