[3/8] riscv/kprobe: Prepare the skeleton to prepare optimized kprobe

Message ID 20221030090141.2550837-4-chenguokai17@mails.ucas.ac.cn
State New
Headers
Series Add OPTPROBES feature on RISCV |

Commit Message

Xim Oct. 30, 2022, 9:01 a.m. UTC
  From: Liao Chang <liaochang1@huawei.com>

This patch just provides a skeleton to prepare optimized kprobe
instruction slot, it consists of two major parts, the first part is to
check if current kprobe satifies the optimization requirement. The 
kprobe based on breakpoint just requires the instrumented instruction to
support execute out-of-line(non PC-relative) or simulation, however 
optimized kprobe based on long-jump needs more requirements, it includes:

 - The target of long jump in the range of 'AUIPC/JALR'
 - No near instruction jump to any instruction replaced by 'AUIPC/JALR'
 - It managed to find one free register to form 'AUIPC/JALR' jumping to
   detour buffer.
 - It managed to find one free register to form 'JR' jumping back from
   detour buffer

The second part is to allocate a larger instruction slot for each optimized
kprobe, the payload of which is patched with the assembly code defined
in opt_trampoline.S, a call to kprobe pre_handler and these instructions
replaced by 'AUIPC/JALR'.

Co-developed-by: Chen Guokai <chenguokai17@mails.ucas.ac.cn>
Signed-off-by: Chen Guokai <chenguokai17@mails.ucas.ac.cn>
Signed-off-by: Liao Chang <liaochang1@huawei.com>
---
 arch/riscv/kernel/probes/opt.c | 107 ++++++++++++++++++++++++++++++++-
 1 file changed, 106 insertions(+), 1 deletion(-)
  

Patch

diff --git a/arch/riscv/kernel/probes/opt.c b/arch/riscv/kernel/probes/opt.c
index 56c8a227c857..e4a619c2077e 100644
--- a/arch/riscv/kernel/probes/opt.c
+++ b/arch/riscv/kernel/probes/opt.c
@@ -10,6 +10,54 @@ 
 
 #include <linux/kprobes.h>
 #include <asm/kprobes.h>
+#include <asm/patch.h>
+
+static inline int in_auipc_jalr_range(long val)
+{
+#ifdef CONFIG_ARCH_RV32I
+	return 1;
+#else
+	/*
+	 * Note that the set of address offsets that can be formed
+	 * by pairing LUI with LD, AUIPC with JALR, etc. in RV64I is
+	 * [−2^31−2^11, 2^31−2^11−1].
+	 */
+	return ((-(1L << 31) - (1L << 11)) <= val) &&
+	       (val < ((1L << 31) - (1L << 11)));
+#endif
+}
+
+/*
+ * Copy optprobe assembly code template into detour buffer and modify some
+ * instructions for each kprobe.
+ */
+static void prepare_detour_buffer(kprobe_opcode_t *code, kprobe_opcode_t *slot,
+				  int rd, struct optimized_kprobe *op,
+				  kprobe_opcode_t opcode)
+{
+}
+
+/*
+ * In RISC-V ISA, AUIPC/JALR clobber one register to form target address,
+ * by inspired by register renaming in OoO processor, this involves search
+ * backwards that is not previously used as a source register and is used
+ * as a destination register before any branch or jump instruction.
+ */
+static void find_free_registers(struct kprobe *kp, struct optimized_kprobe *op,
+				int *rd1, int *rd2)
+{
+}
+
+/*
+ * If two free registers can be found at the beginning of both
+ * the start and the end of replaced code, it can be optimized
+ * Also, in-function jumps need to be checked to make sure that
+ * there is no jump to the second instruction to be replaced
+ */
+static bool can_optimize(unsigned long paddr, struct optimized_kprobe *op)
+{
+	return false;
+}
 
 int arch_prepared_optinsn(struct arch_optimized_insn *optinsn)
 {
@@ -24,7 +72,64 @@  int arch_check_optimized_kprobe(struct optimized_kprobe *op)
 int arch_prepare_optimized_kprobe(struct optimized_kprobe *op,
 				  struct kprobe *orig)
 {
-	return 0;
+	long rel;
+	int rd, ra, ret;
+	kprobe_opcode_t *code = NULL, *slot = NULL;
+
+	if (!can_optimize((unsigned long)orig->addr, op))
+		return -EILSEQ;
+
+	code = kzalloc(MAX_OPTINSN_SIZE, GFP_KERNEL);
+	slot = get_optinsn_slot();
+	if (!code || !slot) {
+		ret = -ENOMEM;
+		goto on_error;
+	}
+
+	/*
+	 * Verify if the address gap is within 4GB range, because this uses
+	 * a auipc+jalr pair.
+	 */
+	rel = (unsigned long)slot - (unsigned long)orig->addr;
+	if (!in_auipc_jalr_range(rel)) {
+		/*
+		 * Different from x86, we free code buf directly instead of
+		 * calling __arch_remove_optimized_kprobe() because
+		 * we have not fill any field in op.
+		 */
+		ret = -ERANGE;
+		goto on_error;
+	}
+
+	/*
+	 * Search two free registers, rd is used as to form AUIPC/JALR jumping
+	 * to detour buffer, ra is used as to form JR jumping back from detour
+	 * buffer.
+	 */
+	find_free_registers(orig, op, &rd, &ra);
+	if (rd == 0 || ra == 0) {
+		ret = -EILSEQ;
+		goto on_error;
+	}
+
+	op->optinsn.rd = rd;
+	prepare_detour_buffer(code, slot, ra, op, orig->opcode);
+
+	ret = patch_text_nosync((void *)slot, code, MAX_OPTINSN_SIZE);
+	if (!ret) {
+		op->optinsn.insn = slot;
+		kfree(code);
+		return 0;
+	}
+
+on_error:
+	if (slot) {
+		free_optinsn_slot(slot, 0);
+		op->optinsn.insn = NULL;
+		op->optinsn.length = 0;
+	}
+	kfree(code);
+	return ret;
 }
 
 void arch_remove_optimized_kprobe(struct optimized_kprobe *op)