diff mbox series

[v2,03/12] arm64: dts: qcom: sc8280xp-pmics: Add thermal zones for PM8280_{1/2} PMICs

Message ID 20221029051449.30678-4-manivannan.sadhasivam@linaro.org
State New
Headers
Series sc8280xp-pmic updates and X13s thermal zone support |

Commit Message

Manivannan Sadhasivam Oct. 29, 2022, 5:14 a.m. UTC 
  Add thermal zones for the PM8280_{1/2} PMICs by using the temperature
alarm blocks as the thermal sensors. Temperature trip points are
inherited from PM8350 PMIC.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi | 44 ++++++++++++++++++++
 1 file changed, 44 insertions(+)

Comments

Konrad Dybcio Oct. 29, 2022, 2:13 p.m. UTC | #1 
On 29.10.2022 07:14, Manivannan Sadhasivam wrote:
> Add thermal zones for the PM8280_{1/2} PMICs by using the temperature
> alarm blocks as the thermal sensors. Temperature trip points are
> inherited from PM8350 PMIC.
> 
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>

Konrad
>  arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi | 44 ++++++++++++++++++++
>  1 file changed, 44 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi
> index 5de47b1434a4..397ff4995003 100644
> --- a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi
> @@ -7,6 +7,50 @@
>  #include <dt-bindings/interrupt-controller/irq.h>
>  #include <dt-bindings/spmi/spmi.h>
>  
> +/ {
> +	thermal-zones {
> +		pm8280_1_thermal: pm8280-1-thermal {
> +			polling-delay-passive = <100>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&pm8280_1_temp_alarm>;
> +
> +			trips {
> +				trip0 {
> +					temperature = <95000>;
> +					hysteresis = <0>;
> +					type = "passive";
> +				};
> +
> +				trip1 {
> +					temperature = <115000>;
> +					hysteresis = <0>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +
> +		pm8280_2_thermal: pm8280-2-thermal {
> +			polling-delay-passive = <100>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&pm8280_2_temp_alarm>;
> +
> +			trips {
> +				trip0 {
> +					temperature = <95000>;
> +					hysteresis = <0>;
> +					type = "passive";
> +				};
> +
> +				trip1 {
> +					temperature = <115000>;
> +					hysteresis = <0>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +	};
> +};
> +
>  &spmi_bus {
>  	pmk8280: pmic@0 {
>  		compatible = "qcom,pmk8350", "qcom,spmi-pmic";
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi
index 5de47b1434a4..397ff4995003 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi
@@ -7,6 +7,50 @@ 
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/spmi/spmi.h>
 
+/ {
+	thermal-zones {
+		pm8280_1_thermal: pm8280-1-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm8280_1_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		pm8280_2_thermal: pm8280-2-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+			thermal-sensors = <&pm8280_2_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
 &spmi_bus {
 	pmk8280: pmic@0 {
 		compatible = "qcom,pmk8350", "qcom,spmi-pmic";