[v1,8/9] arm64: dts: qcom: sm8350-hdk: Enable display & dsi nodes

Message ID 20221028120812.339100-9-robert.foss@linaro.org
State New
Headers
Series Enable Display for SM8350 |

Commit Message

Robert Foss Oct. 28, 2022, 12:08 p.m. UTC
  Enable the display subsystem and the dsi0 output for
the sm8350-hdk board.

Signed-off-by: Robert Foss <robert.foss@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8350-hdk.dts | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)
  

Comments

Bjorn Andersson Oct. 28, 2022, 1:51 p.m. UTC | #1
On Fri, Oct 28, 2022 at 02:08:11PM +0200, Robert Foss wrote:
> Enable the display subsystem and the dsi0 output for
> the sm8350-hdk board.
> 
> Signed-off-by: Robert Foss <robert.foss@linaro.org>
> ---
>  arch/arm64/boot/dts/qcom/sm8350-hdk.dts | 22 ++++++++++++++++++++++
>  1 file changed, 22 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
> index e6deb08c6da0..6e07feb4b3b2 100644
> --- a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
> +++ b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
> @@ -213,10 +213,32 @@ &cdsp {
>  	firmware-name = "qcom/sm8350/cdsp.mbn";
>  };
>  
> +&dispcc {
> +	status = "okay";
> +};
> +
> +&dsi0 {

If you prefix the label for the dsi controller and phy with mdss_ they
sort nicely together with the other display nodes.

Regards,
Bjorn

> +	status = "okay";
> +	vdda-supply = <&vreg_l6b_1p2>;
> +};
> +
> +&dsi0_phy  {
> +	status = "okay";
> +	vdds-supply = <&vreg_l5b_0p88>;
> +};
> +
>  &gpi_dma1 {
>  	status = "okay";
>  };
>  
> +&mdss {
> +	status = "okay";
> +};
> +
> +&mdss_mdp {
> +	status = "okay";
> +};
> +
>  &mpss {
>  	status = "okay";
>  	firmware-name = "qcom/sm8350/modem.mbn";
> -- 
> 2.34.1
>
  
Krzysztof Kozlowski Oct. 28, 2022, 10:03 p.m. UTC | #2
On 28/10/2022 08:08, Robert Foss wrote:
> Enable the display subsystem and the dsi0 output for
> the sm8350-hdk board.
> 
> Signed-off-by: Robert Foss <robert.foss@linaro.org>
> ---
>  arch/arm64/boot/dts/qcom/sm8350-hdk.dts | 22 ++++++++++++++++++++++
>  1 file changed, 22 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
> index e6deb08c6da0..6e07feb4b3b2 100644
> --- a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
> +++ b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
> @@ -213,10 +213,32 @@ &cdsp {
>  	firmware-name = "qcom/sm8350/cdsp.mbn";
>  };
>  
> +&dispcc {
> +	status = "okay";
> +};
> +
> +&dsi0 {
> +	status = "okay";

Status is the last property.


Best regards,
Krzysztof
  
Robert Foss Nov. 11, 2022, 3:17 p.m. UTC | #3
On Sat, 29 Oct 2022 at 00:03, Krzysztof Kozlowski
<krzysztof.kozlowski@linaro.org> wrote:
>
> On 28/10/2022 08:08, Robert Foss wrote:
> > Enable the display subsystem and the dsi0 output for
> > the sm8350-hdk board.
> >
> > Signed-off-by: Robert Foss <robert.foss@linaro.org>
> > ---
> >  arch/arm64/boot/dts/qcom/sm8350-hdk.dts | 22 ++++++++++++++++++++++
> >  1 file changed, 22 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
> > index e6deb08c6da0..6e07feb4b3b2 100644
> > --- a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
> > +++ b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
> > @@ -213,10 +213,32 @@ &cdsp {
> >       firmware-name = "qcom/sm8350/cdsp.mbn";
> >  };
> >
> > +&dispcc {
> > +     status = "okay";
> > +};
> > +
> > +&dsi0 {
> > +     status = "okay";
>
> Status is the last property.

Ack.

>
>
> Best regards,
> Krzysztof
>
  

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
index e6deb08c6da0..6e07feb4b3b2 100644
--- a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
@@ -213,10 +213,32 @@  &cdsp {
 	firmware-name = "qcom/sm8350/cdsp.mbn";
 };
 
+&dispcc {
+	status = "okay";
+};
+
+&dsi0 {
+	status = "okay";
+	vdda-supply = <&vreg_l6b_1p2>;
+};
+
+&dsi0_phy  {
+	status = "okay";
+	vdds-supply = <&vreg_l5b_0p88>;
+};
+
 &gpi_dma1 {
 	status = "okay";
 };
 
+&mdss {
+	status = "okay";
+};
+
+&mdss_mdp {
+	status = "okay";
+};
+
 &mpss {
 	status = "okay";
 	firmware-name = "qcom/sm8350/modem.mbn";