[v2,09/11] arm64: dts: ti: k3-j721e-mcu-wakeup: add VTM node
Commit Message
The j721e supports a single Voltage and Thermal Management (VTM) module
located in the wakeup domain with five associated temperature monitors
located in various hot spots on the die.
Signed-off-by: Bryan Brattlof <bb@ti.com>
---
.../boot/dts/ti/k3-j721e-mcu-wakeup.dtsi | 9 +++
arch/arm64/boot/dts/ti/k3-j721e-thermal.dtsi | 75 +++++++++++++++++++
arch/arm64/boot/dts/ti/k3-j721e.dtsi | 3 +
3 files changed, 87 insertions(+)
create mode 100644 arch/arm64/boot/dts/ti/k3-j721e-thermal.dtsi
@@ -418,4 +418,13 @@ mcu_mcan1: can@40568000 {
interrupt-names = "int0", "int1";
bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
};
+
+ vtm0: temperature-sensor@42040000 {
+ compatible = "ti,j721e-vtm";
+ reg = <0x00 0x42040000 0x00 0x350>,
+ <0x00 0x42050000 0x00 0x350>,
+ <0x00 0x43000300 0x00 0x10>;
+ power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>;
+ #thermal-sensor-cells = <1>;
+ };
};
new file mode 100644
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/thermal/thermal.h>
+
+thermal_zones: thermal-zones {
+ wkup_thermal: wkup-thermal {
+ polling-delay-passive = <250>; /* milliSeconds */
+ polling-delay = <500>; /* milliSeconds */
+ thermal-sensors = <&vtm0 0>;
+
+ trips {
+ wkup_crit: wkup-crit {
+ temperature = <125000>; /* milliCelsius */
+ hysteresis = <2000>; /* milliCelsius */
+ type = "critical";
+ };
+ };
+ };
+
+ mpu_thermal: mpu-thermal {
+ polling-delay-passive = <250>; /* milliSeconds */
+ polling-delay = <500>; /* milliSeconds */
+ thermal-sensors = <&vtm0 1>;
+
+ trips {
+ mpu_crit: mpu-crit {
+ temperature = <125000>; /* milliCelsius */
+ hysteresis = <2000>; /* milliCelsius */
+ type = "critical";
+ };
+ };
+ };
+
+ c7x_thermal: c7x-thermal {
+ polling-delay-passive = <250>; /* milliSeconds */
+ polling-delay = <500>; /* milliSeconds */
+ thermal-sensors = <&vtm0 2>;
+
+ trips {
+ c7x_crit: c7x-crit {
+ temperature = <125000>; /* milliCelsius */
+ hysteresis = <2000>; /* milliCelsius */
+ type = "critical";
+ };
+ };
+ };
+
+ gpu_thermal: gpu-thermal {
+ polling-delay-passive = <250>; /* milliSeconds */
+ polling-delay = <500>; /* milliSeconds */
+ thermal-sensors = <&vtm0 3>;
+
+ trips {
+ gpu_crit: gpu-crit {
+ temperature = <125000>; /* milliCelsius */
+ hysteresis = <2000>; /* milliCelsius */
+ type = "critical";
+ };
+ };
+ };
+
+ r5f_thermal: r5f-thermal {
+ polling-delay-passive = <250>; /* milliSeconds */
+ polling-delay = <500>; /* milliSeconds */
+ thermal-sensors = <&vtm0 4>;
+
+ trips {
+ r5f_crit: r5f-crit {
+ temperature = <125000>; /* milliCelsius */
+ hysteresis = <2000>; /* milliCelsius */
+ type = "critical";
+ };
+ };
+ };
+};
@@ -181,6 +181,9 @@ cbass_mcu_wakeup: bus@28380000 {
<0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>; /* FSS OSPI1 data region 3*/
};
};
+
+ #include "k3-j721e-thermal.dtsi"
+
};
/* Now include the peripherals for each bus segments */