diff mbox series

[1/3] arm64: dts: lx2160a: specify clock frequencies for the MDIO controllers

Message ID 20221025144117.1010488-2-ioana.ciornei@nxp.com
State New
Headers
Series arch: dts: specify the MDC frequency on Layerscape DPAA2 devices |

Commit Message

Ioana Ciornei Oct. 25, 2022, 2:41 p.m. UTC 
  Up until now, the external MDIO controller frequency values relied
either on the default ones out of reset or on those setup by u-boot.
Let's just properly specify the MDC frequency in the DTS so that even
without u-boot's intervention Linux can drive the MDIO bus.

Fixes: 6e1b8fae892d ("arm64: dts: lx2160a: add emdio1 node")
Fixes: 5705b9dcda57 ("arm64: dts: lx2160a: add emdio2 node")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
---
 arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 6 ++++++
 1 file changed, 6 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
index 6680fb2a6dc9..8c76d86cb756 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
@@ -1385,6 +1385,9 @@  emdio1: mdio@8b96000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			little-endian;
+			clock-frequency = <2500000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
 			status = "disabled";
 		};
 
@@ -1395,6 +1398,9 @@  emdio2: mdio@8b97000 {
 			little-endian;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			clock-frequency = <2500000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
 			status = "disabled";
 		};