[v4,1/2] leds: flash: add driver to support flash LED module in QCOM PMICs

Message ID 20221025073802.2662564-2-quic_fenglinw@quicinc.com
State New
Headers
Series Add LED driver for flash module in QCOM PMICs |

Commit Message

Fenglin Wu Oct. 25, 2022, 7:38 a.m. UTC
  Add initial driver to support flash LED module found in Qualcomm
Technologies, Inc. PMICs. The flash module can have 3 or 4 channels
and each channel can be controlled indepedently and support full scale
current up to 1.5 A. It also supports connecting two channels together
to supply one LED component with full scale current up to 2 A. In that
case, the current will be split on each channel symmetrically and the
channels will be enabled and disabled at the same time.

Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
Tested-by: Luca Weiss <luca.weiss@fairphone.com> # sm7225-fairphone-fp4 + pm6150l
---
 drivers/leds/flash/Kconfig           |  15 +
 drivers/leds/flash/Makefile          |   1 +
 drivers/leds/flash/leds-qcom-flash.c | 700 +++++++++++++++++++++++++++
 3 files changed, 716 insertions(+)
 create mode 100644 drivers/leds/flash/leds-qcom-flash.c
  

Comments

Dylan Van Assche Oct. 31, 2022, 10:34 a.m. UTC | #1
Hi Fenglin,

Thanks for submitting these patches! They are really nice!
I tested these patches on an SDM845 based device as the downstream
driver is the same for the PMI8998 compared to the mentioned PMICs in
this patchseries.

Tested-by: Dylan Van Assche <me@dylanvanassche.be> # sdm845-shift-
axolotl + pmi8998

> > Add initial driver to support flash LED module found in Qualcomm
> > Technologies, Inc. PMICs. The flash module can have 3 or 4 channels
> > and each channel can be controlled indepedently and support full >
> > scale
> > current up to 1.5 A. It also supports connecting two channels >
> > together
> > to supply one LED component with full scale current up to 2 A. In >
> > that
> > case, the current will be split on each channel symmetrically and
> > the
> > channels will be enabled and disabled at the same time.
> > 
> > Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
> > Tested-by: Luca Weiss <luca.weiss@fairphone.com> # > sm7225-
> > fairphone-fp4 + pm6150l
> > ---
> >  drivers/leds/flash/Kconfig           |  15 +
> >  drivers/leds/flash/Makefile          |   1 +
> >  drivers/leds/flash/leds-qcom-flash.c | 700 >
> > +++++++++++++++++++++++++++
> >  3 files changed, 716 insertions(+)
> >  create mode 100644 drivers/leds/flash/leds-qcom-flash.c
> > 
> > diff --git a/drivers/leds/flash/Kconfig
> > b/drivers/leds/flash/Kconfig
> > index d3eb689b193c..f36a60409290 100644
> > --- a/drivers/leds/flash/Kconfig
> > +++ b/drivers/leds/flash/Kconfig
> > @@ -61,6 +61,21 @@ config LEDS_MT6360
> >           Independent current sources supply for each flash LED >
> > support torch
> >           and strobe mode.
> >  
> > +config LEDS_QCOM_FLASH
> > +       tristate "LED support for flash module inside Qualcomm >
> > Technologies, Inc. PMIC"
> > +       depends on MFD_SPMI_PMIC || COMPILE_TEST
> > +       depends on LEDS_CLASS && OF
> > +       depends on V4L2_FLASH_LED_CLASS || !V4L2_FLASH_LED_CLASS
> > +       select REGMAP
> > +       help
> > +         This option enables support for the flash module found in
> > > Qualcomm
> > +         Technologies, Inc. PMICs. The flash module can have 3 or
> > 4 > flash LED
> > +         channels and each channel is programmable to support up
> > to > 1.5 A full
> > +         scale current. It also supports connecting two channels'
> > > output together
> > +         to supply one LED component to achieve current up to 2 A.
> > > In such case,
> > +         the total LED current will be split symmetrically on each
> > > channel and
> > +         they will be enabled/disabled at the same time.
> > +
> >  config LEDS_RT4505
> >         tristate "LED support for RT4505 flashlight controller"
> >         depends on I2C && OF
> > diff --git a/drivers/leds/flash/Makefile >
> > b/drivers/leds/flash/Makefile
> > index 0acbddc0b91b..8a60993f1a25 100644
> > --- a/drivers/leds/flash/Makefile
> > +++ b/drivers/leds/flash/Makefile
> > @@ -6,6 +6,7 @@ obj-$(CONFIG_LEDS_AS3645A)      += leds-as3645a.o
> >  obj-$(CONFIG_LEDS_KTD2692)     += leds-ktd2692.o
> >  obj-$(CONFIG_LEDS_LM3601X)     += leds-lm3601x.o
> >  obj-$(CONFIG_LEDS_MAX77693)    += leds-max77693.o
> > +obj-$(CONFIG_LEDS_QCOM_FLASH)  += leds-qcom-flash.o
> >  obj-$(CONFIG_LEDS_RT4505)      += leds-rt4505.o
> >  obj-$(CONFIG_LEDS_RT8515)      += leds-rt8515.o
> >  obj-$(CONFIG_LEDS_SGM3140)     += leds-sgm3140.o
> > diff --git a/drivers/leds/flash/leds-qcom-flash.c >
> > b/drivers/leds/flash/leds-qcom-flash.c
> > new file mode 100644
> > index 000000000000..a9fcf61600c3
> > --- /dev/null
> > +++ b/drivers/leds/flash/leds-qcom-flash.c
> > @@ -0,0 +1,700 @@
> > +// SPDX-License-Identifier: GPL-2.0-only
> > +/*
> > + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights
> > > reserved.
> > + */
> > +
> > +#include <linux/bitfield.h>
> > +#include <linux/bits.h>
> > +#include <linux/leds.h>
> > +#include <linux/led-class-flash.h>
> > +#include <linux/module.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/property.h>
> > +#include <linux/regmap.h>
> > +#include <media/v4l2-flash-led-class.h>
> > +
> > +/* registers definitions */
> > +#define FLASH_TYPE_REG                 0x04
> > +#define FLASH_TYPE_VAL                 0x18
> > +
> > +#define FLASH_SUBTYPE_REG              0x05
> > +#define FLASH_SUBTYPE_3CH_VAL          0x04

PMI8998 has also a 3 channel flash subtype, but reports 0x03 as
subtype. The driver won't probe because of this since the subtype did
not match. Changing this value to 0x03 made this driver work on SDM845
based device as well with PMI8998. Would you consider supporting
SDM845+PMI8998 as well?

> > +#define FLASH_SUBTYPE_4CH_VAL          0x07
> > +
> > +#define FLASH_TIMER_EN_BIT             BIT(7)
> > +#define FLASH_TIMER_VAL_MASK           GENMASK(6, 0)
> > +#define FLASH_TIMER_STEP_MS            10
> > +
> > +#define FLASH_STROBE_HW_SW_SEL_BIT     BIT(2)
> > +#define SW_STROBE_VAL                  0
> > +#define HW_STROBE_VAL                  1
> > +#define FLASH_HW_STROBE_TRIGGER_SEL_BIT        BIT(1)
> > +#define STROBE_LEVEL_TRIGGER_VAL       0
> > +#define STROBE_EDGE_TRIGGER_VAL                1
> > +#define FLASH_STROBE_POLARITY_BIT      BIT(0)
> > +#define STROBE_ACTIVE_HIGH_VAL         1
> > +
> > +#define FLASH_IRES_MASK_4CH            BIT(0)
> > +#define FLASH_IRES_MASK_3CH            GENMASK(1, 0)
> > +#define FLASH_IRES_12P5MA_VAL          0
> > +#define FLASH_IRES_5MA_VAL_4CH         1
> > +#define FLASH_IRES_5MA_VAL_3CH         3
> > +
> > +/* constants */
> > +#define FLASH_CURRENT_MAX_UA           1500000
> > +#define TORCH_CURRENT_MAX_UA           500000
> > +#define FLASH_TOTAL_CURRENT_MAX_UA     2000000
> > +#define FLASH_CURRENT_DEFAULT_UA       1000000
> > +#define TORCH_CURRENT_DEFAULT_UA       200000
> > +
> > +#define TORCH_IRES_UA                  5000
> > +#define FLASH_IRES_UA                  12500
> > +
> > +#define FLASH_TIMEOUT_MAX_US           1280000
> > +#define FLASH_TIMEOUT_STEP_US          10000
> > +
> > +enum hw_type {
> > +       QCOM_MVFLASH_3CH,
> > +       QCOM_MVFLASH_4CH,
> > +};
> > +
> > +enum led_mode {
> > +       FLASH_MODE,
> > +       TORCH_MODE,
> > +};
> > +
> > +enum led_strobe {
> > +       SW_STROBE,
> > +       HW_STROBE,
> > +};
> > +
> > +enum {
> > +       REG_STATUS1,
> > +       REG_STATUS2,
> > +       REG_STATUS3,
> > +       REG_CHAN_TIMER,
> > +       REG_ITARGET,
> > +       REG_MODULE_EN,
> > +       REG_IRESOLUTION,
> > +       REG_CHAN_STROBE,
> > +       REG_CHAN_EN,
> > +       REG_MAX_COUNT,
> > +};
> > +
> > +struct reg_field mvflash_3ch_regs[REG_MAX_COUNT] = {
> > +       REG_FIELD(0x08, 0, 7),                  /* status1      */
> > +       REG_FIELD(0x09, 0, 7),                  /* status2      */
> > +       REG_FIELD(0x0a, 0, 7),                  /* status3      */
> > +       REG_FIELD_ID(0x40, 0, 7, 3, 1),         /* chan_timer   */
> > +       REG_FIELD_ID(0x43, 0, 6, 3, 1),         /* itarget      */
> > +       REG_FIELD(0x46, 7, 7),                  /* module_en    */
> > +       REG_FIELD(0x47, 0, 5),                  /* iresolution  */
> > +       REG_FIELD_ID(0x49, 0, 2, 3, 1),         /* chan_strobe  */
> > +       REG_FIELD(0x4c, 0, 2),                  /* chan_en      */
> > +};

These registers map perfectly for SDM845 with PMI8998 as well, adding
support for this subtype (0x03) would be great.

> > +
> > +struct reg_field mvflash_4ch_regs[REG_MAX_COUNT] = {
> > +       REG_FIELD(0x06, 0, 7),                  /* status1      */
> > +       REG_FIELD(0x07, 0, 6),                  /* status2      */
> > +       REG_FIELD(0x09, 0, 7),                  /* status3      */
> > +       REG_FIELD_ID(0x3e, 0, 7, 4, 1),         /* chan_timer   */
> > +       REG_FIELD_ID(0x42, 0, 6, 4, 1),         /* itarget      */
> > +       REG_FIELD(0x46, 7, 7),                  /* module_en    */
> > +       REG_FIELD(0x49, 0, 3),                  /* iresolution  */
> > +       REG_FIELD_ID(0x4a, 0, 6, 4, 1),         /* chan_strobe  */
> > +       REG_FIELD(0x4e, 0, 3),                  /* chan_en      */
> > +};
> > +
> > +struct qcom_flash_led {
> > +       struct qcom_flash_chip          *chip;
> > +       struct led_classdev_flash       flash;
> > +       struct v4l2_flash               *v4l2_flash;
> > +       u32                             max_flash_current_ma;
> > +       u32                             max_torch_current_ma;
> > +       u32                             max_timeout_ms;
> > +       u32                             flash_current_ma;
> > +       u32                             flash_timeout_ms;
> > +       u8                              *chan_id;
> > +       u8                              chan_count;
> > +       bool                            enabled;
> > +};
> > +
> > +struct qcom_flash_chip {
> > +       struct qcom_flash_led   *leds;
> > +       struct regmap_field     *r_fields[REG_MAX_COUNT];
> > +       struct device           *dev;
> > +       struct mutex            lock;
> > +       enum hw_type            hw_type;
> > +       u8                      leds_count;
> > +       u8                      max_channels;
> > +       u8                      chan_en_bits;
> > +};
> > +
> > +static int set_flash_module_en(struct qcom_flash_led *led, bool
> > en)
> > +{
> > +       struct qcom_flash_chip *chip = led->chip;
> > +       u8 led_mask = 0, val;
> > +       int i, rc;
> > +
> > +       for (i = 0; i < led->chan_count; i++)
> > +               led_mask |= BIT(led->chan_id[i] - 1);
> > +
> > +       mutex_lock(&chip->lock);
> > +       if (en)
> > +               chip->chan_en_bits |= led_mask;
> > +       else
> > +               chip->chan_en_bits &= ~led_mask;
> > +
> > +       val = !!chip->chan_en_bits;
> > +       rc = regmap_field_write(chip->r_fields[REG_MODULE_EN],
> > val);
> > +       if (rc < 0)
> > +               dev_err(chip->dev, "write module_en failed,
> > rc=%d\n", > rc);
> > +       mutex_unlock(&chip->lock);
> > +
> > +       return rc;
> > +}
> > +
> > +static int set_flash_current(struct qcom_flash_led *led, u32 >
> > current_ma, enum led_mode mode)
> > +{
> > +       struct qcom_flash_chip *chip = led->chip;
> > +       u32 itarg_ua = current_ma * 1000 / led->chan_count + 1;
> > +       u32 ires_ua = (mode == FLASH_MODE) ? FLASH_IRES_UA : >
> > TORCH_IRES_UA;
> > +       u8 val, shift, ires_mask = 0, ires_val = 0, chan_id;
> > +       int i, rc;
> > +
> > +       /*
> > +        * Split the current across the channels and set the
> > +        * IRESOLUTION and ITARGET registers accordingly.
> > +        */
> > +       for (i = 0; i < led->chan_count; i++) {
> > +               chan_id = led->chan_id[i];
> > +               if (itarg_ua < ires_ua)
> > +                       val = 0;
> > +               else
> > +                       val = itarg_ua / ires_ua - 1;
> > +
> > +               rc = regmap_fields_write(chip-
> > >r_fields[REG_ITARGET], > chan_id - 1, val);
> > +               if (rc < 0)
> > +                       return rc;
> > +
> > +               if (chip->hw_type == QCOM_MVFLASH_3CH) {
> > +                       shift = (chan_id - 1) * 2;
> > +                       ires_mask |= FLASH_IRES_MASK_3CH << shift;
> > +                       ires_val |= ((mode == FLASH_MODE) ?
> > +                               (FLASH_IRES_12P5MA_VAL << shift) :
> > +                               (FLASH_IRES_5MA_VAL_3CH << shift));
> > +               } else if (chip->hw_type == QCOM_MVFLASH_4CH) {
> > +                       shift = chan_id - 1;
> > +                       ires_mask |= FLASH_IRES_MASK_4CH << shift;
> > +                       ires_val |= ((mode == FLASH_MODE) ?
> > +                               (FLASH_IRES_12P5MA_VAL << shift) :
> > +                               (FLASH_IRES_5MA_VAL_4CH << shift));
> > +               }
> > +       }
> > +
> > +       return > regmap_field_update_bits(chip-
> > >r_fields[REG_IRESOLUTION], ires_mask, > ires_val);
> > +}
> > +
> > +static int set_flash_timeout(struct qcom_flash_led *led, u32 >
> > timeout_ms)
> > +{
> > +       struct qcom_flash_chip *chip = led->chip;
> > +       u8 val, chan_id;
> > +       int rc, i;
> > +
> > +       /* set SAFETY_TIMER for all the channels connected to the >
> > same LED */
> > +       timeout_ms = min_t(u32, timeout_ms, led->max_timeout_ms);
> > +       for (i = 0; i < led->chan_count; i++) {
> > +               chan_id = led->chan_id[i];
> > +               val = timeout_ms / FLASH_TIMER_STEP_MS;
> > +               val = clamp_t(u8, val, 0, FLASH_TIMER_VAL_MASK);
> > +               if (timeout_ms)
> > +                       val |= FLASH_TIMER_EN_BIT;
> > +
> > +               rc = > regmap_fields_write(chip-
> > >r_fields[REG_CHAN_TIMER], chan_id - 1, > val);
> > +               if (rc < 0)
> > +                       return rc;
> > +       }
> > +
> > +       return 0;
> > +}
> > +
> > +static int set_flash_strobe(struct qcom_flash_led *led, enum >
> > led_strobe strobe, bool state)
> > +{
> > +       struct qcom_flash_chip *chip = led->chip;
> > +       u8 mask, val, chan_id = 0, chan_mask = 0;
> > +       int rc, i;
> > +
> > +       /* Set SW strobe config for all channels connected to the
> > LED > */
> > +       for (i = 0; i < led->chan_count; i++) {
> > +               chan_id = led->chan_id[i];
> > +               if (strobe == SW_STROBE)
> > +                       val =
> > FIELD_PREP(FLASH_STROBE_HW_SW_SEL_BIT, > SW_STROBE_VAL);
> > +               else
> > +                       val =
> > FIELD_PREP(FLASH_STROBE_HW_SW_SEL_BIT, > HW_STROBE_VAL);
> > +
> > +               val |= FIELD_PREP(FLASH_HW_STROBE_TRIGGER_SEL_BIT,
> > > STROBE_LEVEL_TRIGGER_VAL) |
> > +                       FIELD_PREP(FLASH_STROBE_POLARITY_BIT, >
> > STROBE_ACTIVE_HIGH_VAL);
> > +               rc = > regmap_fields_write(chip-
> > >r_fields[REG_CHAN_STROBE], chan_id - 1, > val);
> > +               if (rc < 0)
> > +                       return rc;
> > +
> > +               chan_mask |= BIT(chan_id - 1);
> > +       }
> > +
> > +       /* enable/disable flash channels */
> > +       mask = chan_mask;
> > +       val = state ? mask : 0;
> > +       rc = regmap_field_update_bits(chip->r_fields[REG_CHAN_EN],
> > > mask, val);
> > +       if (rc < 0)
> > +               return rc;
> > +
> > +       led->enabled = state;
> > +       return 0;
> > +}
> > +
> > +static int qcom_flash_brightness_set(struct led_classdev_flash >
> > *fled_cdev, u32 brightness)
> > +{
> > +       struct qcom_flash_led *led = container_of(fled_cdev, struct
> > > qcom_flash_led, flash);
> > +
> > +       led->flash_current_ma = min_t(u32, led-
> > >max_flash_current_ma, > brightness / 1000);
> > +       return 0;
> > +}

This doesn't seem to work in torch mode for me on PMI8998. If the
brightness is 0, the torch is OFF as expected, but when the torch is
ON, you cannot control the brightness. The brightness is the same for
[1, 255]. If the hardware cannot change the brightness in torch mode,
it would be nice to report a max_brightness value of 1 instead of 255
for userspace. This could be a limitation of the PMI8998, not sure.
Do you have any insights here? This driver is already 99% working for
SDM845+PMI8998.

Flash mode works great, timeout & brightness can be configured just
fine.

> > +
> > +static int qcom_flash_timeout_set(struct led_classdev_flash >
> > *fled_cdev, u32 timeout)
> > +{
> > +       struct qcom_flash_led *led = container_of(fled_cdev, struct
> > > qcom_flash_led, flash);
> > +
> > +       led->flash_timeout_ms = timeout / 1000;
> > +       return 0;
> > +}
> > +
> > +static int qcom_flash_strobe_set(struct led_classdev_flash >
> > *fled_cdev, bool state)
> > +{
> > +       struct qcom_flash_led *led = container_of(fled_cdev, struct
> > > qcom_flash_led, flash);
> > +       int rc;
> > +
> > +       rc = set_flash_current(led, led->flash_current_ma, >
> > FLASH_MODE);
> > +       if (rc < 0)
> > +               return rc;
> > +
> > +       rc = set_flash_timeout(led, led->flash_timeout_ms);
> > +       if (rc < 0)
> > +               return rc;
> > +
> > +       rc = set_flash_module_en(led, state);
> > +       if (rc < 0)
> > +               return rc;
> > +
> > +       return set_flash_strobe(led, SW_STROBE, state);
> > +}
> > +
> > +static int qcom_flash_strobe_get(struct led_classdev_flash >
> > *fled_cdev, bool *state)
> > +{
> > +       struct qcom_flash_led *led = container_of(fled_cdev, struct
> > > qcom_flash_led, flash);
> > +
> > +       *state = led->enabled;
> > +       return 0;
> > +}
> > +
> > +static int qcom_flash_fault_get(struct led_classdev_flash >
> > *fled_cdev, u32 *fault)
> > +{
> > +       struct qcom_flash_led *led = container_of(fled_cdev, struct
> > > qcom_flash_led, flash);
> > +       struct qcom_flash_chip *chip = led->chip;
> > +       u8 shift, chan_id = 0, chan_mask = 0;
> > +       u8 ot_mask = 0, oc_mask = 0, uv_mask = 0;
> > +       u32 val, fault_sts = 0;
> > +       int i, rc;
> > +
> > +       rc = regmap_field_read(chip->r_fields[REG_STATUS1], &val);
> > +       if (rc < 0)
> > +               return rc;
> > +
> > +       for (i = 0; i < led->chan_count; i++) {
> > +               chan_id = led->chan_id[i];
> > +               shift = (chan_id - 1) * 2;
> > +               if (val & BIT(shift))
> > +                       fault_sts |= LED_FAULT_SHORT_CIRCUIT;
> > +               chan_mask |= BIT(chan_id - 1);
> > +       }
> > +
> > +       rc = regmap_field_read(chip->r_fields[REG_STATUS2], &val);
> > +       if (rc < 0)
> > +               return rc;
> > +
> > +       if (chip->hw_type == QCOM_MVFLASH_3CH) {
> > +               ot_mask = 0x0f;
> > +               oc_mask = 0xe0;
> > +               uv_mask = 0x10;
> > +       } else if (chip->hw_type == QCOM_MVFLASH_4CH) {
> > +               ot_mask = 0x70;
> > +               oc_mask = 0x0e;
> > +               uv_mask = 0x01;
> > +       }
> > +
> > +       if (val & ot_mask)
> > +               fault_sts |= LED_FAULT_OVER_TEMPERATURE;
> > +       if (val & oc_mask)
> > +               fault_sts |= LED_FAULT_OVER_CURRENT;
> > +       if (val & uv_mask)
> > +               fault_sts |= LED_FAULT_INPUT_VOLTAGE;
> > +
> > +       rc = regmap_field_read(chip->r_fields[REG_STATUS3], &val);
> > +       if (rc < 0)
> > +               return rc;
> > +
> > +       if (chip->hw_type == QCOM_MVFLASH_3CH) {
> > +               if (val & chan_mask)
> > +                       fault_sts |= LED_FAULT_TIMEOUT;
> > +       } else if (chip->hw_type == QCOM_MVFLASH_4CH) {
> > +               for (i = 0; i < led->chan_count; i++) {
> > +                       chan_id = led->chan_id[i];
> > +                       shift = (chan_id - 1) * 2;
> > +                       if (val & BIT(shift))
> > +                               fault_sts |= LED_FAULT_TIMEOUT;
> > +               }
> > +       }
> > +
> > +       *fault = fault_sts;
> > +       return 0;
> > +}
> > +
> > +static int qcom_flash_led_brightness_set(struct led_classdev >
> > *led_cdev,
> > +                                       enum led_brightness >
> > brightness)
> > +{
> > +       struct led_classdev_flash *fled_cdev =
> > +               container_of(led_cdev, struct led_classdev_flash, >
> > led_cdev);
> > +       struct qcom_flash_led *led =
> > +               container_of(fled_cdev, struct qcom_flash_led, >
> > flash);
> > +       u32 current_ma = brightness * led->max_torch_current_ma / >
> > LED_FULL;
> > +       bool enable = !!brightness;
> > +       int rc;
> > +
> > +       rc = set_flash_current(led, current_ma, TORCH_MODE);
> > +       if (rc < 0)
> > +               return rc;
> > +
> > +       /* disable flash timeout for torch LED */
> > +       rc = set_flash_timeout(led, 0);
> > +       if (rc < 0)
> > +               return rc;
> > +
> > +       rc = set_flash_module_en(led, enable);
> > +       if (rc < 0)
> > +               return rc;
> > +
> > +       return set_flash_strobe(led, SW_STROBE, enable);
> > +}
> > +
> > +static const struct led_flash_ops qcom_flash_ops = {
> > +       .flash_brightness_set = qcom_flash_brightness_set,
> > +       .strobe_set = qcom_flash_strobe_set,
> > +       .strobe_get = qcom_flash_strobe_get,
> > +       .timeout_set = qcom_flash_timeout_set,
> > +       .fault_get = qcom_flash_fault_get,
> > +};
> > +
> > +#if IS_ENABLED(CONFIG_V4L2_FLASH_LED_CLASS)
> > +static int qcom_flash_external_strobe_set(struct v4l2_flash >
> > *v4l2_flash, bool enable)
> > +{
> > +       struct led_classdev_flash *flash = v4l2_flash->fled_cdev;
> > +       struct qcom_flash_led *led = container_of(flash, struct >
> > qcom_flash_led, flash);
> > +       int rc;
> > +
> > +       rc = set_flash_module_en(led, enable);
> > +       if (rc < 0)
> > +               return rc;
> > +
> > +       if (enable)
> > +               return set_flash_strobe(led, HW_STROBE, true);
> > +       else
> > +               return set_flash_strobe(led, SW_STROBE, false);
> > +}
> > +
> > +static enum led_brightness qcom_flash_intensity_to_led_brightness(
> > +               struct v4l2_flash *v4l2_flash, s32 intensity)
> > +{
> > +       struct led_classdev_flash *flash = v4l2_flash->fled_cdev;
> > +       struct qcom_flash_led *led = container_of(flash, struct >
> > qcom_flash_led, flash);
> > +       u32 current_ma = intensity / 1000;
> > +
> > +       current_ma = min_t(u32, current_ma, > led-
> > >max_torch_current_ma);
> > +       if (!current_ma)
> > +               return LED_OFF;
> > +
> > +       return current_ma * LED_FULL / led->max_torch_current_ma;
> > +}
> > +
> > +static s32 qcom_flash_brightness_to_led_intensity(struct
> > v4l2_flash > *v4l2_flash,
> > +                                       enum led_brightness >
> > brightness)
> > +{
> > +       struct led_classdev_flash *flash = v4l2_flash->fled_cdev;
> > +       struct qcom_flash_led *led = container_of(flash, struct >
> > qcom_flash_led, flash);
> > +
> > +       return (brightness * led->max_torch_current_ma * 1000) / >
> > LED_FULL;
> > +}
> > +
> > +static const struct v4l2_flash_ops qcom_v4l2_flash_ops = {
> > +       .external_strobe_set = qcom_flash_external_strobe_set,
> > +       .intensity_to_led_brightness = >
> > qcom_flash_intensity_to_led_brightness,
> > +       .led_brightness_to_intensity = >
> > qcom_flash_brightness_to_led_intensity,
> > +};
> > +
> > +static int qcom_flash_v4l2_init(struct qcom_flash_led *led, struct
> > > fwnode_handle *fwnode)
> > +{
> > +       struct v4l2_flash_config v4l2_cfg = {0};
> > +       struct led_flash_setting *s = &v4l2_cfg.intensity;
> > +
> > +       if (!(led->flash.led_cdev.flags & LED_DEV_CAP_FLASH))
> > +               return 0;
> > +
> > +       s->min = s->step = TORCH_IRES_UA * led->chan_count;
> > +       s->max = led->max_torch_current_ma * 1000;
> > +       s->val = min_t(u32, s->max, TORCH_CURRENT_DEFAULT_UA);
> > +
> > +       strscpy(v4l2_cfg.dev_name, > led->flash.led_cdev.dev-
> > >kobj.name,
> > +                                       sizeof(v4l2_cfg.dev_name));
> > +       v4l2_cfg.has_external_strobe = 1;
> > +       v4l2_cfg.flash_faults = LED_FAULT_INPUT_VOLTAGE | >
> > LED_FAULT_OVER_CURRENT |
> > +               LED_FAULT_SHORT_CIRCUIT |
> > LED_FAULT_OVER_TEMPERATURE > | LED_FAULT_TIMEOUT;
> > +
> > +       led->v4l2_flash = v4l2_flash_init(led->chip->dev, fwnode, >
> > &led->flash,
> > +                                       &qcom_v4l2_flash_ops, >
> > &v4l2_cfg);
> > +       return PTR_ERR_OR_ZERO(led->v4l2_flash);
> > +}
> > +# else
> > +static int qcom_flash_v4l2_init(struct qcom_flash_led *led, struct
> > > fwnode_handle *fwnode)
> > +{
> > +       return 0;
> > +}
> > +#endif
> > +
> > +static int qcom_flash_register_led_device(struct device *parent,
> > +               struct fwnode_handle *node, struct qcom_flash_led >
> > *led)
> > +{
> > +       struct qcom_flash_chip *chip = led->chip;
> > +       struct led_init_data init_data;
> > +       struct led_classdev_flash *flash;
> > +       struct led_flash_setting *s;
> > +       u32 count, val;
> > +       u32 channels[4];
> > +       int i, rc;
> > +
> > +       flash = &led->flash;
> > +       count = fwnode_property_count_u32(node, "led-sources");
> > +       if (count <= 0) {
> > +               dev_err(chip->dev, "No led-sources specified\n");
> > +               return -ENODEV;
> > +       }
> > +
> > +       if (count > chip->max_channels) {
> > +               dev_err(chip->dev, "led-sources count %u exceeds >
> > maximum channel count %u\n",
> > +                               count, chip->max_channels);
> > +               return -EINVAL;
> > +       }
> > +
> > +       rc = fwnode_property_read_u32_array(node, "led-sources", >
> > channels, count);
> > +       if (rc < 0) {
> > +               dev_err(chip->dev, "get led-sources failed,
> > rc=%d\n", > rc);
> > +               return rc;
> > +       }
> > +
> > +       led->chan_count = count;
> > +       led->chan_id = devm_kcalloc(chip->dev, count, sizeof(u8), >
> > GFP_KERNEL);
> > +       if (!led->chan_id)
> > +               return -ENOMEM;
> > +
> > +       for (i = 0; i < count; i++) {
> > +               if (channels[i] > chip->max_channels) {
> > +                       dev_err(chip->dev, "led-source out of HW >
> > support range [1-%u]\n",
> > +                                       chip->max_channels);
> > +                       return -EINVAL;
> > +               }
> > +
> > +               led->chan_id[i] = channels[i];
> > +       }
> > +
> > +       rc = fwnode_property_read_u32(node, "led-max-microamp", >
> > &val);
> > +       if (rc < 0) {
> > +               dev_err(chip->dev, "Get led-max-microamp failed, >
> > rc=%d\n", rc);
> > +               return rc;
> > +       }
> > +
> > +       if (!val) {
> > +               dev_err(chip->dev, "led-max-microamp shouldn't be >
> > 0\n");
> > +               return -EINVAL;
> > +       }
> > +
> > +       val = min_t(u32, val, TORCH_CURRENT_MAX_UA * > led-
> > >chan_count);
> > +       led->max_torch_current_ma = val / 1000;
> > +
> > +       if (fwnode_property_present(node, "flash-max-microamp")) {
> > +               flash->led_cdev.flags |= LED_DEV_CAP_FLASH;
> > +               rc = fwnode_property_read_u32(node, > "flash-max-
> > microamp", &val);
> > +               if (rc < 0) {
> > +                       dev_err(chip->dev, "Get flash-max-microamp
> > > failed, rc=%d\n", rc);
> > +                       return rc;
> > +               }
> > +
> > +               val = min_t(u32, val, FLASH_CURRENT_MAX_UA * > led-
> > >chan_count);
> > +               val = min_t(u32, val, FLASH_TOTAL_CURRENT_MAX_UA);
> > +               s = &flash->brightness;
> > +               s->min = s->step = FLASH_IRES_UA * led->chan_count;
> > +               s->max = val;
> > +               s->val = min_t(u32, val, FLASH_CURRENT_DEFAULT_UA);
> > +               led->max_flash_current_ma = val / 1000;
> > +               led->flash_current_ma = s->val / 1000;
> > +
> > +               rc = fwnode_property_read_u32(node, > "flash-max-
> > timeout-us", &val);
> > +               if (rc < 0) {
> > +                       dev_err(chip->dev, "Get flash-max-timeout-
> > us > failed, rc=%d\n", rc);
> > +                       return rc;
> > +               }
> > +
> > +               val = min_t(u32, val, FLASH_TIMEOUT_MAX_US);
> > +               s = &flash->timeout;
> > +               s->min = s->step = FLASH_TIMEOUT_STEP_US;
> > +               s->val = s->max = val;
> > +               led->max_timeout_ms = led->flash_timeout_ms = val /
> > > 1000;
> > +
> > +               flash->ops = &qcom_flash_ops;
> > +       }
> > +
> > +       flash->led_cdev.brightness_set_blocking = >
> > qcom_flash_led_brightness_set;
> > +       init_data.fwnode = node;
> > +       init_data.devicename = NULL;
> > +       init_data.default_label = NULL;
> > +       init_data.devname_mandatory = false;
> > +       rc = devm_led_classdev_flash_register_ext(parent, flash, >
> > &init_data);
> > +       if (rc < 0) {
> > +               dev_err(chip->dev, "Register flash LED classdev >
> > failed, rc=%d\n", rc);
> > +               return rc;
> > +       }
> > +
> > +       return qcom_flash_v4l2_init(led, node);
> > +}
> > +
> > +static int qcom_flash_led_probe(struct platform_device *pdev)
> > +{
> > +       struct qcom_flash_chip *chip;
> > +       struct qcom_flash_led *led;
> > +       struct fwnode_handle *child;
> > +       struct device *dev = &pdev->dev;
> > +       struct regmap *map;
> > +       struct reg_field *regs;
> > +       int count, i, rc;
> > +       u32 val, reg_base;
> > +
> > +       chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL);
> > +       if (!chip)
> > +               return -ENOMEM;
> > +
> > +       map = dev_get_regmap(dev->parent, NULL);
> > +       if (!map) {
> > +               dev_err(dev, "Failed to get parent regmap\n");
> > +               return -EINVAL;
> > +       }
> > +
> > +       rc = fwnode_property_read_u32(dev->fwnode, "reg",
> > &reg_base);
> > +       if (rc < 0) {
> > +               dev_err(dev, "Failed to get register base address,
> > > rc=%d\n", rc);
> > +               return rc;
> > +       }
> > +
> > +       rc = regmap_read(map, reg_base + FLASH_TYPE_REG, &val);
> > +       if (rc < 0) {
> > +               dev_err(dev, "Read flash module type failed, >
> > rc=%d\n", rc);
> > +               return rc;
> > +       }
> > +
> > +       if (val != FLASH_TYPE_VAL) {
> > +               dev_err(dev, "type %#x is not a flash module\n", >
> > val);
> > +               return -ENODEV;
> > +       }
> > +
> > +       rc = regmap_read(map, reg_base + FLASH_SUBTYPE_REG, &val);
> > +       if (rc < 0) {
> > +               dev_err(dev, "Read flash module subtype failed, >
> > rc=%d\n", rc);
> > +               return rc;
> > +       }
> > +
> > +       if (val == FLASH_SUBTYPE_3CH_VAL) {
> > +               chip->hw_type = QCOM_MVFLASH_3CH;
> > +               chip->max_channels = 3;
> > +               regs = mvflash_3ch_regs;
> > +       } else if (val == FLASH_SUBTYPE_4CH_VAL) {
> > +               chip->hw_type = QCOM_MVFLASH_4CH;
> > +               chip->max_channels = 4;
> > +               regs = mvflash_4ch_regs;
> > +       } else {
> > +               dev_err(dev, "flash subtype %#x is not yet >
> > supported\n", val);
> > +               return -ENODEV;
> > +       }
> > +
> > +       for (i = 0; i < REG_MAX_COUNT; i++)
> > +               regs[i].reg += reg_base;
> > +
> > +       rc = devm_regmap_field_bulk_alloc(dev, map, chip->r_fields,
> > > regs, REG_MAX_COUNT);
> > +       if (rc < 0) {
> > +               dev_err(dev, "failed to alloc regmap filed,
> > rc=%d\n", > rc);
> > +               return rc;
> > +       }
> > +
> > +       chip->dev = dev;
> > +       platform_set_drvdata(pdev, chip);
> > +       mutex_init(&chip->lock);
> > +       count = device_get_child_node_count(dev);
> > +       if (count == 0 || count > chip->max_channels) {
> > +               dev_err(dev, "No child or child count exceeds
> > %d\n", > chip->max_channels);
> > +               return -EINVAL;
> > +       }
> > +
> > +       chip->leds = devm_kcalloc(dev, count, sizeof(*chip->leds),
> > > GFP_KERNEL);
> > +       if (!chip->leds)
> > +               return -ENOMEM;
> > +
> > +       device_for_each_child_node(dev, child) {
> > +               led = &chip->leds[chip->leds_count];
> > +               led->chip = chip;
> > +               rc = qcom_flash_register_led_device(dev, child,
> > led);
> > +               if (rc < 0)
> > +                       goto release;
> > +
> > +               chip->leds_count++;
> > +       }
> > +
> > +       return 0;
> > +release:
> > +       while (chip->leds && chip->leds_count--)
> > +               v4l2_flash_release(chip->leds[chip-
> > >leds_count].v4l2_> flash);
> > +       return rc;
> > +}
> > +
> > +static int qcom_flash_led_remove(struct platform_device *pdev)
> > +{
> > +       struct qcom_flash_chip *chip = platform_get_drvdata(pdev);
> > +
> > +       while (chip->leds_count--)
> > +               v4l2_flash_release(chip->leds[chip-
> > >leds_count].v4l2_> flash);
> > +
> > +       mutex_destroy(&chip->lock);
> > +       return 0;
> > +}
> > +
> > +static const struct of_device_id qcom_flash_led_match_table[] = {
> > +       { .compatible = "qcom,spmi-flash-led" },
> > +       { }
> > +};
> > +
> > +static struct platform_driver qcom_flash_led_driver = {
> > +       .driver = {
> > +               .name = "leds-qcom-flash",
> > +               .of_match_table = qcom_flash_led_match_table,
> > +       },
> > +       .probe = qcom_flash_led_probe,
> > +       .remove = qcom_flash_led_remove,
> > +};
> > +
> > +module_platform_driver(qcom_flash_led_driver);
> > +
> > +MODULE_DESCRIPTION("QCOM Flash LED driver");
> > +MODULE_LICENSE("GPL");

Kind regards,
Dylan Van Assche
  
Luca Weiss Oct. 31, 2022, 1:56 p.m. UTC | #2
Hi Fenglin,

On Tue Oct 25, 2022 at 9:38 AM CEST, Fenglin Wu wrote:
> Add initial driver to support flash LED module found in Qualcomm
> Technologies, Inc. PMICs. The flash module can have 3 or 4 channels
> and each channel can be controlled indepedently and support full scale
> current up to 1.5 A. It also supports connecting two channels together
> to supply one LED component with full scale current up to 2 A. In that
> case, the current will be split on each channel symmetrically and the
> channels will be enabled and disabled at the same time.
>
> Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
> Tested-by: Luca Weiss <luca.weiss@fairphone.com> # sm7225-fairphone-fp4 + pm6150l
> ---
>  drivers/leds/flash/Kconfig           |  15 +
>  drivers/leds/flash/Makefile          |   1 +
>  drivers/leds/flash/leds-qcom-flash.c | 700 +++++++++++++++++++++++++++
>  3 files changed, 716 insertions(+)
>  create mode 100644 drivers/leds/flash/leds-qcom-flash.c
>

<snip>

> +static const struct of_device_id qcom_flash_led_match_table[] = {
> +	{ .compatible = "qcom,spmi-flash-led" },
> +	{ }
> +};

Dylan has noticed that auto-loading the module based on dt match doesn't
work currently. It seems that this line is missing here to enable that:

  MODULE_DEVICE_TABLE(of, qcom_flash_led_match_table);

Please add it for v5!

Regards
Luca

> +
> +static struct platform_driver qcom_flash_led_driver = {
> +	.driver = {
> +		.name = "leds-qcom-flash",
> +		.of_match_table = qcom_flash_led_match_table,
> +	},
> +	.probe = qcom_flash_led_probe,
> +	.remove = qcom_flash_led_remove,
> +};
> +
> +module_platform_driver(qcom_flash_led_driver);
> +
> +MODULE_DESCRIPTION("QCOM Flash LED driver");
> +MODULE_LICENSE("GPL");
> -- 
> 2.25.1
  
Fenglin Wu Nov. 1, 2022, 5:10 a.m. UTC | #3
On 2022/10/31 18:34, Dylan Van Assche wrote:
> 
> Hi Fenglin,
> 
> Thanks for submitting these patches! They are really nice!
> I tested these patches on an SDM845 based device as the downstream
> driver is the same for the PMI8998 compared to the mentioned PMICs in
> this patchseries.
> 
> Tested-by: Dylan Van Assche <me@dylanvanassche.be> # sdm845-shift-
> axolotl + pmi8998
> 
Thanks for testing the patch at your side, Dylan!

>>> Add initial driver to support flash LED module found in Qualcomm
>>> Technologies, Inc. PMICs. The flash module can have 3 or 4 channels
>>> and each channel can be controlled indepedently and support full >
>>> scale
>>> current up to 1.5 A. It also supports connecting two channels >
>>> together
>>> to supply one LED component with full scale current up to 2 A. In >
>>> that
>>> case, the current will be split on each channel symmetrically and
>>> the
>>> channels will be enabled and disabled at the same time.
>>>
>>> Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
>>> Tested-by: Luca Weiss <luca.weiss@fairphone.com> # > sm7225-
>>> fairphone-fp4 + pm6150l
>>> ---
>>>   drivers/leds/flash/Kconfig           |  15 +
>>>   drivers/leds/flash/Makefile          |   1 +
>>>   drivers/leds/flash/leds-qcom-flash.c | 700 >
>>> +++++++++++++++++++++++++++
>>>   3 files changed, 716 insertions(+)
>>>   create mode 100644 drivers/leds/flash/leds-qcom-flash.c
>>>
>>> diff --git a/drivers/leds/flash/Kconfig
>>> b/drivers/leds/flash/Kconfig
>>> index d3eb689b193c..f36a60409290 100644
>>> --- a/drivers/leds/flash/Kconfig
>>> +++ b/drivers/leds/flash/Kconfig
>>> @@ -61,6 +61,21 @@ config LEDS_MT6360
>>>            Independent current sources supply for each flash LED >
>>> support torch
>>>            and strobe mode.
>>>   
>>> +config LEDS_QCOM_FLASH
>>> +       tristate "LED support for flash module inside Qualcomm >
>>> Technologies, Inc. PMIC"
>>> +       depends on MFD_SPMI_PMIC || COMPILE_TEST
>>> +       depends on LEDS_CLASS && OF
>>> +       depends on V4L2_FLASH_LED_CLASS || !V4L2_FLASH_LED_CLASS
>>> +       select REGMAP
>>> +       help
>>> +         This option enables support for the flash module found in
>>>> Qualcomm
>>> +         Technologies, Inc. PMICs. The flash module can have 3 or
>>> 4 > flash LED
>>> +         channels and each channel is programmable to support up
>>> to > 1.5 A full
>>> +         scale current. It also supports connecting two channels'
>>>> output together
>>> +         to supply one LED component to achieve current up to 2 A.
>>>> In such case,
>>> +         the total LED currentwill be split symmetrically on each
>>>> channel and
>>> +         they will be enabled/disabled at the same time.
>>> +
>>>   config LEDS_RT4505
>>>          tristate "LED support for RT4505 flashlight controller"
>>>          depends on I2C && OF
>>> diff --git a/drivers/leds/flash/Makefile >
>>> b/drivers/leds/flash/Makefile
>>> index 0acbddc0b91b..8a60993f1a25 100644
>>> --- a/drivers/leds/flash/Makefile
>>> +++ b/drivers/leds/flash/Makefile
>>> @@ -6,6 +6,7 @@ obj-$(CONFIG_LEDS_AS3645A)      += leds-as3645a.o
>>>   obj-$(CONFIG_LEDS_KTD2692)     += leds-ktd2692.o
>>>   obj-$(CONFIG_LEDS_LM3601X)     += leds-lm3601x.o
>>>   obj-$(CONFIG_LEDS_MAX77693)    += leds-max77693.o
>>> +obj-$(CONFIG_LEDS_QCOM_FLASH)  += leds-qcom-flash.o
>>>   obj-$(CONFIG_LEDS_RT4505)      += leds-rt4505.o
>>>   obj-$(CONFIG_LEDS_RT8515)      += leds-rt8515.o
>>>   obj-$(CONFIG_LEDS_SGM3140)     += leds-sgm3140.o
>>> diff --git a/drivers/leds/flash/leds-qcom-flash.c >
>>> b/drivers/leds/flash/leds-qcom-flash.c
>>> new file mode 100644
>>> index 000000000000..a9fcf61600c3
>>> --- /dev/null
>>> +++ b/drivers/leds/flash/leds-qcom-flash.c
>>> @@ -0,0 +1,700 @@
>>> +// SPDX-License-Identifier: GPL-2.0-only
>>> +/*
>>> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights
>>>> reserved.
>>> + */
>>> +
>>> +#include <linux/bitfield.h>
>>> +#include <linux/bits.h>
>>> +#include <linux/leds.h>
>>> +#include <linux/led-class-flash.h>
>>> +#include <linux/module.h>
>>> +#include <linux/platform_device.h>
>>> +#include <linux/property.h>
>>> +#include <linux/regmap.h>
>>> +#include <media/v4l2-flash-led-class.h>
>>> +
>>> +/* registers definitions */
>>> +#define FLASH_TYPE_REG                 0x04
>>> +#define FLASH_TYPE_VAL                 0x18
>>> +
>>> +#define FLASH_SUBTYPE_REG              0x05
>>> +#define FLASH_SUBTYPE_3CH_VAL          0x04
> 
> PMI8998 has also a 3 channel flash subtype, but reports 0x03 as
> subtype. The driver won't probe because of this since the subtype did
> not match. Changing this value to 0x03 made this driver work on SDM845
> based device as well with PMI8998. Would you consider supporting
> SDM845+PMI8998 as well?
> 
I just double checked, flash module in PMI8998 (with subtype 0x3) has 
very similar register definition as the flash module in PM8150C (with 
subtype 0x4) that the driver is intended to support, it's good know that 
it's 99% work.
I can add the 0x3 subtype support but the only problem is I couldn't 
find a device with PMI8998 to test it out. Would it be good if I add the 
support and rely on your test result?

>>> +#define FLASH_SUBTYPE_4CH_VAL          0x07
>>> +
>>> +#define FLASH_TIMER_EN_BIT             BIT(7)
>>> +#define FLASH_TIMER_VAL_MASK           GENMASK(6, 0)
>>> +#define FLASH_TIMER_STEP_MS            10
>>> +
>>> +#define FLASH_STROBE_HW_SW_SEL_BIT     BIT(2)
>>> +#define SW_STROBE_VAL                  0
>>> +#define HW_STROBE_VAL                  1
>>> +#define FLASH_HW_STROBE_TRIGGER_SEL_BIT        BIT(1)
>>> +#define STROBE_LEVEL_TRIGGER_VAL       0
>>> +#define STROBE_EDGE_TRIGGER_VAL                1
>>> +#define FLASH_STROBE_POLARITY_BIT      BIT(0)
>>> +#define STROBE_ACTIVE_HIGH_VAL         1
>>> +
>>> +#define FLASH_IRES_MASK_4CH            BIT(0)
>>> +#define FLASH_IRES_MASK_3CH            GENMASK(1, 0)
>>> +#define FLASH_IRES_12P5MA_VAL          0
>>> +#define FLASH_IRES_5MA_VAL_4CH         1
>>> +#define FLASH_IRES_5MA_VAL_3CH         3
>>> +
>>> +/* constants */
>>> +#define FLASH_CURRENT_MAX_UA           1500000
>>> +#define TORCH_CURRENT_MAX_UA           500000
>>> +#define FLASH_TOTAL_CURRENT_MAX_UA     2000000
>>> +#define FLASH_CURRENT_DEFAULT_UA       1000000
>>> +#define TORCH_CURRENT_DEFAULT_UA       200000
>>> +
>>> +#define TORCH_IRES_UA                  5000
>>> +#define FLASH_IRES_UA                  12500
>>> +
>>> +#define FLASH_TIMEOUT_MAX_US           1280000
>>> +#define FLASH_TIMEOUT_STEP_US          10000
>>> +
>>> +enum hw_type {
>>> +       QCOM_MVFLASH_3CH,
>>> +       QCOM_MVFLASH_4CH,
>>> +};
>>> +
>>> +enum led_mode {
>>> +       FLASH_MODE,
>>> +       TORCH_MODE,
>>> +};
>>> +
>>> +enum led_strobe {
>>> +       SW_STROBE,
>>> +       HW_STROBE,
>>> +};
>>> +
>>> +enum {
>>> +       REG_STATUS1,
>>> +       REG_STATUS2,
>>> +       REG_STATUS3,
>>> +       REG_CHAN_TIMER,
>>> +       REG_ITARGET,
>>> +       REG_MODULE_EN,
>>> +       REG_IRESOLUTION,
>>> +       REG_CHAN_STROBE,
>>> +       REG_CHAN_EN,
>>> +       REG_MAX_COUNT,
>>> +};
>>> +
>>> +struct reg_field mvflash_3ch_regs[REG_MAX_COUNT] = {
>>> +       REG_FIELD(0x08, 0, 7),                  /* status1      */
>>> +       REG_FIELD(0x09, 0, 7),                  /* status2      */
>>> +       REG_FIELD(0x0a, 0, 7),                  /* status3      */
>>> +       REG_FIELD_ID(0x40, 0, 7, 3, 1),         /* chan_timer   */
>>> +       REG_FIELD_ID(0x43, 0, 6, 3, 1),         /* itarget      */
>>> +       REG_FIELD(0x46, 7, 7),                  /* module_en    */
>>> +       REG_FIELD(0x47, 0, 5),                  /* iresolution  */
>>> +       REG_FIELD_ID(0x49, 0, 2, 3, 1),         /* chan_strobe  */
>>> +       REG_FIELD(0x4c, 0, 2),                  /* chan_en      */
>>> +};
> 
> These registers map perfectly for SDM845 with PMI8998 as well, adding
> support for this subtype (0x03) would be great.
>
>>> +
>>> +struct reg_field mvflash_4ch_regs[REG_MAX_COUNT] = {
>>> +       REG_FIELD(0x06, 0, 7),                  /* status1      */
>>> +       REG_FIELD(0x07, 0, 6),                  /* status2      */
>>> +       REG_FIELD(0x09, 0, 7),                  /* status3      */
>>> +       REG_FIELD_ID(0x3e, 0, 7, 4, 1),         /* chan_timer   */
>>> +       REG_FIELD_ID(0x42, 0, 6, 4, 1),         /* itarget      */
>>> +       REG_FIELD(0x46, 7, 7),                  /* module_en    */
>>> +       REG_FIELD(0x49, 0, 3),                  /* iresolution  */
>>> +       REG_FIELD_ID(0x4a, 0, 6, 4, 1),         /* chan_strobe  */
>>> +       REG_FIELD(0x4e, 0, 3),                  /* chan_en      */
>>> +};
>>> +
>>> +struct qcom_flash_led {
>>> +       struct qcom_flash_chip          *chip;
>>> +       struct led_classdev_flash       flash;
>>> +       struct v4l2_flash               *v4l2_flash;
>>> +       u32                             max_flash_current_ma;
>>> +       u32                             max_torch_current_ma;
>>> +       u32                             max_timeout_ms;
>>> +       u32                             flash_current_ma;
>>> +       u32                             flash_timeout_ms;
>>> +       u8                              *chan_id;
>>> +       u8                              chan_count;
>>> +       bool                            enabled;
>>> +};
>>> +
>>> +struct qcom_flash_chip {
>>> +       struct qcom_flash_led   *leds;
>>> +       struct regmap_field     *r_fields[REG_MAX_COUNT];
>>> +       struct device           *dev;
>>> +       struct mutex            lock;
>>> +       enum hw_type            hw_type;
>>> +       u8                      leds_count;
>>> +       u8                      max_channels;
>>> +       u8                      chan_en_bits;
>>> +};
>>> +
>>> +static int set_flash_module_en(struct qcom_flash_led *led, bool
>>> en)
>>> +{
>>> +       struct qcom_flash_chip *chip= led->chip;
>>> +       u8 led_mask = 0, val;
>>> +       int i, rc;
>>> +
>>> +       for (i = 0; i < led->chan_count; i++)
>>> +               led_mask |= BIT(led->chan_id[i] - 1);
>>> +
>>> +       mutex_lock(&chip->lock);
>>> +       if (en)
>>> +               chip->chan_en_bits |= led_mask;
>>> +       else
>>> +               chip->chan_en_bits &= ~led_mask;
>>> +
>>> +       val = !!chip->chan_en_bits;
>>> +       rc = regmap_field_write(chip->r_fields[REG_MODULE_EN],
>>> val);
>>> +       if (rc < 0)
>>> +               dev_err(chip->dev, "write module_en failed,
>>> rc=%d\n", > rc);
>>> +       mutex_unlock(&chip->lock);
>>> +
>>> +       return rc;
>>> +}
>>> +
>>> +static int set_flash_current(struct qcom_flash_led *led, u32 >
>>> current_ma, enum led_mode mode)
>>> +{
>>> +       struct qcom_flash_chip *chip= led->chip;
>>> +       u32 itarg_ua = current_ma * 1000 / led->chan_count + 1;
>>> +       u32 ires_ua = (mode ==FLASH_MODE) ? FLASH_IRES_UA : >
>>> TORCH_IRES_UA;
>>> +       u8 val, shift, ires_mask =0, ires_val = 0, chan_id;
>>> +       int i, rc;
>>> +
>>> +       /*
>>> +        * Split the current across the channels and set the
>>> +        * IRESOLUTION and ITARGET registers accordingly.
>>> +        */
>>> +       for (i = 0; i < led->chan_count; i++) {
>>> +               chan_id = led->chan_id[i];
>>> +               if (itarg_ua < ires_ua)
>>> +                       val = 0;
>>> +               else
>>> +                       val = itarg_ua / ires_ua - 1;
>>> +
>>> +               rc = regmap_fields_write(chip-
>>>> r_fields[REG_ITARGET], > chan_id - 1, val);
>>> +               if (rc < 0)
>>> +                       returnrc;
>>> +
>>> +               if (chip->hw_type == QCOM_MVFLASH_3CH) {
>>> +                       shift = (chan_id - 1) * 2;
>>> +                       ires_mask |= FLASH_IRES_MASK_3CH << shift;
>>> +                       ires_val |= ((mode == FLASH_MODE) ?
>>> +                               (FLASH_IRES_12P5MA_VAL << shift) :
>>> +                               (FLASH_IRES_5MA_VAL_3CH << shift));
>>> +               } else if (chip->hw_type == QCOM_MVFLASH_4CH) {
>>> +                       shift = chan_id - 1;
>>> +                       ires_mask |= FLASH_IRES_MASK_4CH << shift;
>>> +                       ires_val |= ((mode == FLASH_MODE) ?
>>> +                               (FLASH_IRES_12P5MA_VAL << shift) :
>>> +                               (FLASH_IRES_5MA_VAL_4CH << shift));
>>> +               }
>>> +       }
>>> +
>>> +       return > regmap_field_update_bits(chip-
>>>> r_fields[REG_IRESOLUTION], ires_mask, > ires_val);
>>> +}
>>> +
>>> +static int set_flash_timeout(struct qcom_flash_led *led, u32 >
>>> timeout_ms)
>>> +{
>>> +       struct qcom_flash_chip *chip= led->chip;
>>> +       u8 val, chan_id;
>>> +       int rc, i;
>>> +
>>> +       /* set SAFETY_TIMER for all the channels connected to the >
>>> same LED */
>>> +       timeout_ms = min_t(u32, timeout_ms, led->max_timeout_ms);
>>> +       for (i = 0; i < led->chan_count; i++) {
>>> +               chan_id = led->chan_id[i];
>>> +               val = timeout_ms / FLASH_TIMER_STEP_MS;
>>> +               val = clamp_t(u8, val, 0, FLASH_TIMER_VAL_MASK);
>>> +               if (timeout_ms)
>>> +                       val |= FLASH_TIMER_EN_BIT;
>>> +
>>> +               rc = > regmap_fields_write(chip-
>>>> r_fields[REG_CHAN_TIMER], chan_id - 1, > val);
>>> +               if (rc < 0)
>>> +                       returnrc;
>>> +       }
>>> +
>>> +       return 0;
>>> +}
>>> +
>>> +static int set_flash_strobe(struct qcom_flash_led *led, enum >
>>> led_strobe strobe, bool state)
>>> +{
>>> +       struct qcom_flash_chip *chip= led->chip;
>>> +       u8 mask, val, chan_id = 0,chan_mask = 0;
>>> +       int rc, i;
>>> +
>>> +       /* Set SW strobe config for all channels connected to the
>>> LED > */
>>> +       for (i = 0; i < led->chan_count; i++) {
>>> +               chan_id = led->chan_id[i];
>>> +               if (strobe == SW_STROBE)
>>> +                       val =
>>> FIELD_PREP(FLASH_STROBE_HW_SW_SEL_BIT, > SW_STROBE_VAL);
>>> +               else
>>> +                       val =
>>> FIELD_PREP(FLASH_STROBE_HW_SW_SEL_BIT, > HW_STROBE_VAL);
>>> +
>>> +               val |= FIELD_PREP(FLASH_HW_STROBE_TRIGGER_SEL_BIT,
>>>> STROBE_LEVEL_TRIGGER_VAL) |
>>> +                       FIELD_PREP(FLASH_STROBE_POLARITY_BIT, >
>>> STROBE_ACTIVE_HIGH_VAL);
>>> +               rc = > regmap_fields_write(chip-
>>>> r_fields[REG_CHAN_STROBE], chan_id - 1, > val);
>>> +               if (rc < 0)
>>> +                       returnrc;
>>> +
>>> +               chan_mask |= BIT(chan_id - 1);
>>> +       }
>>> +
>>> +       /* enable/disable flash channels */
>>> +       mask = chan_mask;
>>> +       val = state ? mask : 0;
>>> +       rc = regmap_field_update_bits(chip->r_fields[REG_CHAN_EN],
>>>> mask, val);
>>> +       if (rc < 0)
>>> +               return rc;
>>> +
>>> +       led->enabled = state;
>>> +       return 0;
>>> +}
>>> +
>>> +static int qcom_flash_brightness_set(struct led_classdev_flash >
>>> *fled_cdev, u32 brightness)
>>> +{
>>> +       struct qcom_flash_led *led = container_of(fled_cdev, struct
>>>> qcom_flash_led, flash);
>>> +
>>> +       led->flash_current_ma = min_t(u32, led-
>>>> max_flash_current_ma, > brightness / 1000);
>>> +       return 0;
>>> +}
> 
> This doesn't seem to work in torch mode for me on PMI8998. If the
> brightness is 0, the torch is OFF as expected, but when the torch is
> ON, you cannot control the brightness. The brightness is the same for
> [1, 255]. If the hardware cannot change the brightness in torch mode,
> it would be nice to report a max_brightness value of 1 instead of 255
> for userspace. This could be a limitation of the PMI8998, not sure.
> Do you have any insights here? This driver is already 99% working for
> SDM845+PMI8998.
> 
> Flash mode works great, timeout & brightness can be configured just
> fine.
> 

Here, function qcom_flash_brightness_set() is used for setting 
brightness in flash mode and it was supposed to be working with 
following commands combination:
  	echo xxx > flash_brightness
	echo 1 > flash_strobe  (you will need to toggle flash_strobe when you 
enabling it again)

Can you check if you can see the brightness change in flash mode when 
you updating the flash_brightness value with these commands?

You can echo any value between [0, max_flash_brightness] into the 
flash_brightness, there is a "max_flash_brightness" sysfs node and the 
value comes from DT property "flash-max-microamp", ex. my dtsi node has 
"flash-max-microamp = <2000000>;" defined so I am having following value 
for max_flash_brightness:

kalama:/sys/class/leds/white:flash-0 # cat max_flash_brightness
2000000

And by default flash mode uses 12500uA resolution so you won't see 
brightness change when you update it with values between [1, 12500].

If you want to update the brightness for torch node, you can directly 
update the "brightness" node with values between [0, 255], and it's 
mapping to the torch current between [0, led-max-microamp]. 
"led-max-microamp" is also has value coming from the DT property.

This worked at my side on both pm8150C and pm8550.I think it should work 
on PMI8998 as well because the flash module in it is very similar to the 
one in PM8150c. Let me know if you still see such issues at your side.
Thanks

>>> +
>>> +static int qcom_flash_timeout_set(struct led_classdev_flash >
>>> *fled_cdev, u32 timeout)
>>> +{
>>> +       struct qcom_flash_led *led = container_of(fled_cdev, struct
>>>> qcom_flash_led, flash);
>>> +
>>> +       led->flash_timeout_ms = timeout / 1000;
>>> +       return 0;
>>> +}
>>> +
>>> +static int qcom_flash_strobe_set(struct led_classdev_flash >
>>> *fled_cdev, bool state)
>>> +{
>>> +       struct qcom_flash_led *led = container_of(fled_cdev, struct
>>>> qcom_flash_led, flash);
>>> +       int rc;
>>> +
>>> +       rc = set_flash_current(led, led->flash_current_ma, >
>>> FLASH_MODE);
>>> +       if (rc < 0)
>>> +               return rc;
>>> +
>>> +       rc = set_flash_timeout(led, led->flash_timeout_ms);
>>> +       if (rc < 0)
>>> +               return rc;
>>> +
>>> +       rc = set_flash_module_en(led, state);
>>> +       if (rc < 0)
>>> +               return rc;
>>> +
>>> +       return set_flash_strobe(led,SW_STROBE, state);
>>> +}
>>> +
>>> +static int qcom_flash_strobe_get(struct led_classdev_flash >
>>> *fled_cdev, bool *state)
>>> +{
>>> +       struct qcom_flash_led *led = container_of(fled_cdev, struct
>>>> qcom_flash_led, flash);
>>> +
>>> +       *state = led->enabled;
>>> +       return 0;
>>> +}
>>> +
>>> +static int qcom_flash_fault_get(struct led_classdev_flash >
>>> *fled_cdev, u32 *fault)
>>> +{
>>> +       struct qcom_flash_led *led = container_of(fled_cdev, struct
>>>> qcom_flash_led, flash);
>>> +       struct qcom_flash_chip *chip= led->chip;
>>> +       u8 shift, chan_id = 0, chan_mask = 0;
>>> +       u8 ot_mask = 0, oc_mask = 0, uv_mask = 0;
>>> +       u32 val, fault_sts = 0;
>>> +       int i, rc;
>>> +
>>> +       rc = regmap_field_read(chip->r_fields[REG_STATUS1], &val);
>>> +       if (rc < 0)
>>> +               return rc;
>>> +
>>> +       for (i = 0; i < led->chan_count; i++) {
>>> +               chan_id = led->chan_id[i];
>>> +               shift = (chan_id - 1) * 2;
>>> +               if (val & BIT(shift))
>>> +                       fault_sts |= LED_FAULT_SHORT_CIRCUIT;
>>> +               chan_mask |= BIT(chan_id - 1);
>>> +       }
>>> +
>>> +       rc = regmap_field_read(chip->r_fields[REG_STATUS2], &val);
>>> +       if (rc < 0)
>>> +               return rc;
>>> +
>>> +       if (chip->hw_type == QCOM_MVFLASH_3CH) {
>>> +               ot_mask = 0x0f;
>>> +               oc_mask = 0xe0;
>>> +               uv_mask = 0x10;
>>> +       } else if (chip->hw_type == QCOM_MVFLASH_4CH) {
>>> +               ot_mask = 0x70;
>>> +               oc_mask = 0x0e;
>>> +               uv_mask = 0x01;
>>> +       }
>>> +
>>> +       if (val & ot_mask)
>>> +               fault_sts |= LED_FAULT_OVER_TEMPERATURE;
>>> +       if (val & oc_mask)
>>> +               fault_sts |= LED_FAULT_OVER_CURRENT;
>>> +       if (val & uv_mask)
>>> +               fault_sts |= LED_FAULT_INPUT_VOLTAGE;
>>> +
>>> +       rc = regmap_field_read(chip->r_fields[REG_STATUS3], &val);
>>> +       if (rc < 0)
>>> +               return rc;
>>> +
>>> +       if (chip->hw_type == QCOM_MVFLASH_3CH) {
>>> +               if (val & chan_mask)
>>> +                       fault_sts |= LED_FAULT_TIMEOUT;
>>> +       } else if (chip->hw_type == QCOM_MVFLASH_4CH) {
>>> +               for (i = 0; i < led->chan_count; i++) {
>>> +                       chan_id = led->chan_id[i];
>>> +                       shift = (chan_id - 1) * 2;
>>> +                       if (val & BIT(shift))
>>> +                               fault_sts |= LED_FAULT_TIMEOUT;
>>> +               }
>>> +       }
>>> +
>>> +       *fault = fault_sts;
>>> +       return 0;
>>> +}
>>> +
>>> +static int qcom_flash_led_brightness_set(struct led_classdev >
>>> *led_cdev,
>>> +                                       enum led_brightness >
>>> brightness)
>>> +{
>>> +       struct led_classdev_flash *fled_cdev =
>>> +               container_of(led_cdev, struct led_classdev_flash, >
>>> led_cdev);
>>> +       struct qcom_flash_led *led =
>>> +               container_of(fled_cdev, struct qcom_flash_led, >
>>> flash);
>>> +       u32 current_ma = brightness * led->max_torch_current_ma / >
>>> LED_FULL;
>>> +       bool enable = !!brightness;
>>> +       int rc;
>>> +
>>> +       rc = set_flash_current(led, current_ma, TORCH_MODE);
>>> +       if (rc < 0)
>>> +               return rc;
>>> +
>>> +       /* disable flash timeout fortorch LED */
>>> +       rc = set_flash_timeout(led, 0);
>>> +       if (rc < 0)
>>> +               return rc;
>>> +
>>> +       rc = set_flash_module_en(led, enable);
>>> +       if (rc < 0)
>>> +               return rc;
>>> +
>>> +       return set_flash_strobe(led,SW_STROBE, enable);
>>> +}
>>> +
>>> +static const struct led_flash_ops qcom_flash_ops = {
>>> +       .flash_brightness_set = qcom_flash_brightness_set,
>>> +       .strobe_set = qcom_flash_strobe_set,
>>> +       .strobe_get = qcom_flash_strobe_get,
>>> +       .timeout_set = qcom_flash_timeout_set,
>>> +       .fault_get = qcom_flash_fault_get,
>>> +};
>>> +
>>> +#if IS_ENABLED(CONFIG_V4L2_FLASH_LED_CLASS)
>>> +static int qcom_flash_external_strobe_set(struct v4l2_flash >
>>> *v4l2_flash, bool enable)
>>> +{
>>> +       struct led_classdev_flash *flash = v4l2_flash->fled_cdev;
>>> +       struct qcom_flash_led *led = container_of(flash, struct >
>>> qcom_flash_led, flash);
>>> +       int rc;
>>> +
>>> +       rc = set_flash_module_en(led, enable);
>>> +       if (rc < 0)
>>> +               return rc;
>>> +
>>> +       if (enable)
>>> +               return set_flash_strobe(led, HW_STROBE, true);
>>> +       else
>>> +               return set_flash_strobe(led, SW_STROBE, false);
>>> +}
>>> +
>>> +static enum led_brightness qcom_flash_intensity_to_led_brightness(
>>> +               struct v4l2_flash *v4l2_flash, s32 intensity)
>>> +{
>>> +       struct led_classdev_flash *flash = v4l2_flash->fled_cdev;
>>> +       struct qcom_flash_led *led = container_of(flash, struct >
>>> qcom_flash_led, flash);
>>> +       u32 current_ma = intensity/ 1000;
>>> +
>>> +       current_ma = min_t(u32, current_ma, > led-
>>>> max_torch_current_ma);
>>> +       if (!current_ma)
>>> +               return LED_OFF;
>>> +
>>> +       return current_ma * LED_FULL/ led->max_torch_current_ma;
>>> +}
>>> +
>>> +static s32 qcom_flash_brightness_to_led_intensity(struct
>>> v4l2_flash > *v4l2_flash,
>>> +                                       enum led_brightness >
>>> brightness)
>>> +{
>>> +       struct led_classdev_flash *flash = v4l2_flash->fled_cdev;
>>> +       struct qcom_flash_led *led = container_of(flash, struct >
>>> qcom_flash_led, flash);
>>> +
>>> +       return (brightness * led->max_torch_current_ma * 1000) / >
>>> LED_FULL;
>>> +}
>>> +
>>> +static const struct v4l2_flash_ops qcom_v4l2_flash_ops = {
>>> +       .external_strobe_set = qcom_flash_external_strobe_set,
>>> +       .intensity_to_led_brightness= >
>>> qcom_flash_intensity_to_led_brightness,
>>> +       .led_brightness_to_intensity= >
>>> qcom_flash_brightness_to_led_intensity,
>>> +};
>>> +
>>> +static int qcom_flash_v4l2_init(struct qcom_flash_led *led, struct
>>>> fwnode_handle *fwnode)
>>> +{
>>> +       struct v4l2_flash_config v4l2_cfg = {0};
>>> +       struct led_flash_setting *s = &v4l2_cfg.intensity;
>>> +
>>> +       if (!(led->flash.led_cdev.flags & LED_DEV_CAP_FLASH))
>>> +               return 0;
>>> +
>>> +       s->min = s->step = TORCH_IRES_UA * led->chan_count;
>>> +       s->max = led->max_torch_current_ma * 1000;
>>> +       s->val = min_t(u32, s->max, TORCH_CURRENT_DEFAULT_UA);
>>> +
>>> +       strscpy(v4l2_cfg.dev_name, >led->flash.led_cdev.dev-
>>>> kobj.name,
>>> +                                       sizeof(v4l2_cfg.dev_name));
>>> +       v4l2_cfg.has_external_strobe= 1;
>>> +       v4l2_cfg.flash_faults = LED_FAULT_INPUT_VOLTAGE | >
>>> LED_FAULT_OVER_CURRENT |
>>> +               LED_FAULT_SHORT_CIRCUIT |
>>> LED_FAULT_OVER_TEMPERATURE > | LED_FAULT_TIMEOUT;
>>> +
>>> +       led->v4l2_flash = v4l2_flash_init(led->chip->dev, fwnode, >
>>> &led->flash,
>>> +                                       &qcom_v4l2_flash_ops, >
>>> &v4l2_cfg);
>>> +       return PTR_ERR_OR_ZERO(led->v4l2_flash);
>>> +}
>>> +# else
>>> +static int qcom_flash_v4l2_init(struct qcom_flash_led *led, struct
>>>> fwnode_handle *fwnode)
>>> +{
>>> +       return 0;
>>> +}
>>> +#endif
>>> +
>>> +static int qcom_flash_register_led_device(struct device *parent,
>>> +               struct fwnode_handle *node, struct qcom_flash_led >
>>> *led)
>>> +{
>>> +       struct qcom_flash_chip *chip= led->chip;
>>> +       struct led_init_data init_data;
>>> +       struct led_classdev_flash *flash;
>>> +       struct led_flash_setting *s;
>>> +       u32 count, val;
>>> +       u32 channels[4];
>>> +       int i, rc;
>>> +
>>> +       flash = &led->flash;
>>> +       count = fwnode_property_count_u32(node, "led-sources");
>>> +       if (count <= 0) {
>>> +               dev_err(chip->dev, "No led-sources specified\n");
>>> +               return -ENODEV;
>>> +       }
>>> +
>>> +       if (count > chip->max_channels) {
>>> +               dev_err(chip->dev, "led-sources count %u exceeds >
>>> maximum channel count %u\n",
>>> +                               count, chip->max_channels);
>>> +               return -EINVAL;
>>> +       }
>>> +
>>> +       rc = fwnode_property_read_u32_array(node, "led-sources", >
>>> channels, count);
>>> +       if (rc < 0) {
>>> +               dev_err(chip->dev, "get led-sources failed,
>>> rc=%d\n", > rc);
>>> +               return rc;
>>> +       }
>>> +
>>> +       led->chan_count = count;
>>> +       led->chan_id = devm_kcalloc(chip->dev, count, sizeof(u8), >
>>> GFP_KERNEL);
>>> +       if (!led->chan_id)
>>> +               return -ENOMEM;
>>> +
>>> +       for (i = 0; i < count; i++) {
>>> +               if (channels[i] > chip->max_channels) {
>>> +                       dev_err(chip->dev, "led-source out of HW >
>>> support range [1-%u]\n",
>>> +                                       chip->max_channels);
>>> +                       return-EINVAL;
>>> +               }
>>> +
>>> +               led->chan_id[i] = channels[i];
>>> +       }
>>> +
>>> +       rc = fwnode_property_read_u32(node, "led-max-microamp", >
>>> &val);
>>> +       if (rc < 0) {
>>> +               dev_err(chip->dev, "Get led-max-microamp failed, >
>>> rc=%d\n", rc);
>>> +               return rc;
>>> +       }
>>> +
>>> +       if (!val) {
>>> +               dev_err(chip->dev, "led-max-microamp shouldn't be >
>>> 0\n");
>>> +               return -EINVAL;
>>> +       }
>>> +
>>> +       val = min_t(u32, val, TORCH_CURRENT_MAX_UA * > led-
>>>> chan_count);
>>> +       led->max_torch_current_ma = val / 1000;
>>> +
>>> +       if (fwnode_property_present(node, "flash-max-microamp")) {
>>> +               flash->led_cdev.flags |= LED_DEV_CAP_FLASH;
>>> +               rc = fwnode_property_read_u32(node, > "flash-max-
>>> microamp", &val);
>>> +               if (rc < 0) {
>>> +                       dev_err(chip->dev, "Get flash-max-microamp
>>>> failed, rc=%d\n", rc);
>>> +                       returnrc;
>>> +               }
>>> +
>>> +               val = min_t(u32, val, FLASH_CURRENT_MAX_UA * > led-
>>>> chan_count);
>>> +               val = min_t(u32, val, FLASH_TOTAL_CURRENT_MAX_UA);
>>> +               s = &flash->brightness;
>>> +               s->min = s->step = FLASH_IRES_UA * led->chan_count;
>>> +               s->max = val;
>>> +               s->val = min_t(u32, val, FLASH_CURRENT_DEFAULT_UA);
>>> +               led->max_flash_current_ma = val / 1000;
>>> +               led->flash_current_ma = s->val / 1000;
>>> +
>>> +               rc = fwnode_property_read_u32(node, > "flash-max-
>>> timeout-us", &val);
>>> +               if (rc < 0) {
>>> +                       dev_err(chip->dev, "Get flash-max-timeout-
>>> us > failed, rc=%d\n", rc);
>>> +                       returnrc;
>>> +               }
>>> +
>>> +               val = min_t(u32, val, FLASH_TIMEOUT_MAX_US);
>>> +               s = &flash->timeout;
>>> +               s->min = s->step = FLASH_TIMEOUT_STEP_US;
>>> +               s->val = s->max = val;
>>> +               led->max_timeout_ms = led->flash_timeout_ms = val /
>>>> 1000;
>>> +
>>> +               flash->ops = &qcom_flash_ops;
>>> +       }
>>> +
>>> +       flash->led_cdev.brightness_set_blocking = >
>>> qcom_flash_led_brightness_set;
>>> +       init_data.fwnode = node;
>>> +       init_data.devicename = NULL;
>>> +       init_data.default_label = NULL;
>>> +       init_data.devname_mandatory = false;
>>> +       rc = devm_led_classdev_flash_register_ext(parent, flash, >
>>> &init_data);
>>> +       if (rc < 0) {
>>> +               dev_err(chip->dev, "Register flash LED classdev >
>>> failed, rc=%d\n", rc);
>>> +               return rc;
>>> +       }
>>> +
>>> +       return qcom_flash_v4l2_init(led, node);
>>> +}
>>> +
>>> +static int qcom_flash_led_probe(struct platform_device *pdev)
>>> +{
>>> +       struct qcom_flash_chip *chip;
>>> +       struct qcom_flash_led *led;
>>> +       struct fwnode_handle *child;
>>> +       struct device *dev = &pdev->dev;
>>> +       struct regmap *map;
>>> +       struct reg_field *regs;
>>> +       int count, i, rc;
>>> +       u32 val, reg_base;
>>> +
>>> +       chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL);
>>> +       if (!chip)
>>> +               return -ENOMEM;
>>> +
>>> +       map = dev_get_regmap(dev->parent, NULL);
>>> +       if (!map) {
>>> +               dev_err(dev, "Failed to get parent regmap\n");
>>> +               return -EINVAL;
>>> +       }
>>> +
>>> +       rc = fwnode_property_read_u32(dev->fwnode, "reg",
>>> &reg_base);
>>> +       if (rc < 0) {
>>> +               dev_err(dev, "Failed to get register base address,
>>>> rc=%d\n", rc);
>>> +               return rc;
>>> +       }
>>> +
>>> +       rc = regmap_read(map, reg_base + FLASH_TYPE_REG, &val);
>>> +       if (rc < 0) {
>>> +               dev_err(dev, "Read flash module type failed, >
>>> rc=%d\n", rc);
>>> +               return rc;
>>> +       }
>>> +
>>> +       if (val != FLASH_TYPE_VAL){
>>> +               dev_err(dev, "type %#x is not a flash module\n", >
>>> val);
>>> +               return -ENODEV;
>>> +       }
>>> +
>>> +       rc = regmap_read(map, reg_base + FLASH_SUBTYPE_REG, &val);
>>> +       if (rc < 0) {
>>> +               dev_err(dev, "Read flash module subtype failed, >
>>> rc=%d\n", rc);
>>> +               return rc;
>>> +       }
>>> +
>>> +       if (val == FLASH_SUBTYPE_3CH_VAL) {
>>> +               chip->hw_type = QCOM_MVFLASH_3CH;
>>> +               chip->max_channels = 3;
>>> +               regs = mvflash_3ch_regs;
>>> +       } else if (val == FLASH_SUBTYPE_4CH_VAL) {
>>> +               chip->hw_type = QCOM_MVFLASH_4CH;
>>> +               chip->max_channels = 4;
>>> +               regs = mvflash_4ch_regs;
>>> +       } else {
>>> +               dev_err(dev, "flash subtype %#x is not yet >
>>> supported\n", val);
>>> +               return -ENODEV;
>>> +       }
>>> +
>>> +       for (i = 0; i < REG_MAX_COUNT; i++)
>>> +               regs[i].reg += reg_base;
>>> +
>>> +       rc = devm_regmap_field_bulk_alloc(dev, map, chip->r_fields,
>>>> regs, REG_MAX_COUNT);
>>> +       if (rc < 0) {
>>> +               dev_err(dev, "failed to alloc regmap filed,
>>> rc=%d\n", > rc);
>>> +               return rc;
>>> +       }
>>> +
>>> +       chip->dev = dev;
>>> +       platform_set_drvdata(pdev, chip);
>>> +       mutex_init(&chip->lock);
>>> +       count = device_get_child_node_count(dev);
>>> +       if (count == 0 || count > chip->max_channels) {
>>> +               dev_err(dev, "No child or child count exceeds
>>> %d\n", > chip->max_channels);
>>> +               return -EINVAL;
>>> +       }
>>> +
>>> +       chip->leds = devm_kcalloc(dev, count, sizeof(*chip->leds),
>>>> GFP_KERNEL);
>>> +       if (!chip->leds)
>>> +               return -ENOMEM;
>>> +
>>> +       device_for_each_child_node(dev, child) {
>>> +               led = &chip->leds[chip->leds_count];
>>> +               led->chip = chip;
>>> +               rc = qcom_flash_register_led_device(dev, child,
>>> led);
>>> +               if (rc < 0)
>>> +                       goto release;
>>> +
>>> +               chip->leds_count++;
>>> +       }
>>> +
>>> +       return 0;
>>> +release:
>>> +       while (chip->leds && chip->leds_count--)
>>> +               v4l2_flash_release(chip->leds[chip-
>>>> leds_count].v4l2_> flash);
>>> +       return rc;
>>> +}
>>> +
>>> +static int qcom_flash_led_remove(struct platform_device *pdev)
>>> +{
>>> +       struct qcom_flash_chip *chip= platform_get_drvdata(pdev);
>>> +
>>> +       while (chip->leds_count--)
>>> +               v4l2_flash_release(chip->leds[chip-
>>>> leds_count].v4l2_> flash);
>>> +
>>> +       mutex_destroy(&chip->lock);
>>> +       return 0;
>>> +}
>>> +
>>> +static const struct of_device_id qcom_flash_led_match_table[] = {
>>> +       { .compatible = "qcom,spmi-flash-led" },
>>> +       { }
>>> +};
>>> +
>>> +static struct platform_driver qcom_flash_led_driver = {
>>> +       .driver = {
>>> +               .name = "leds-qcom-flash",
>>> +               .of_match_table = qcom_flash_led_match_table,
>>> +       },
>>> +       .probe = qcom_flash_led_probe,
>>> +       .remove = qcom_flash_led_remove,
>>> +};
>>> +
>>> +module_platform_driver(qcom_flash_led_driver);
>>> +
>>> +MODULE_DESCRIPTION("QCOM Flash LED driver");
>>> +MODULE_LICENSE("GPL");
> 
> Kind regards,
> Dylan Van Assche
  
Fenglin Wu Nov. 1, 2022, 5:11 a.m. UTC | #4
On 2022/10/31 21:56, Luca Weiss wrote:
> Hi Fenglin,
> 
> On Tue Oct 25, 2022 at 9:38 AM CEST, Fenglin Wu wrote:
>> Add initial driver to support flash LED module found in Qualcomm
>> Technologies, Inc. PMICs. The flash module can have 3 or 4 channels
>> and each channel can be controlled indepedently and support full scale
>> current up to 1.5 A. It also supports connecting two channels together
>> to supply one LED component with full scale current up to 2 A. In that
>> case, the current will be split on each channel symmetrically and the
>> channels will be enabled and disabled at the same time.
>>
>> Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
>> Tested-by: Luca Weiss <luca.weiss@fairphone.com> # sm7225-fairphone-fp4 + pm6150l
>> ---
>>   drivers/leds/flash/Kconfig           |  15 +
>>   drivers/leds/flash/Makefile          |   1 +
>>   drivers/leds/flash/leds-qcom-flash.c | 700 +++++++++++++++++++++++++++
>>   3 files changed, 716 insertions(+)
>>   create mode 100644 drivers/leds/flash/leds-qcom-flash.c
>>
> 
> <snip>
> 
>> +static const struct of_device_id qcom_flash_led_match_table[] = {
>> +	{ .compatible = "qcom,spmi-flash-led" },
>> +	{ }
>> +};
> 
> Dylan has noticed that auto-loading the module based on dt match doesn't
> work currently. It seems that this line is missing here to enable that:
> 
>    MODULE_DEVICE_TABLE(of, qcom_flash_led_match_table);
> 
> Please add it for v5!
> 
> Regards
> Luca
> 
Will add it for v5, thank you!

>> +
>> +static struct platform_driver qcom_flash_led_driver = {
>> +	.driver = {
>> +		.name = "leds-qcom-flash",
>> +		.of_match_table = qcom_flash_led_match_table,
>> +	},
>> +	.probe = qcom_flash_led_probe,
>> +	.remove = qcom_flash_led_remove,
>> +};
>> +
>> +module_platform_driver(qcom_flash_led_driver);
>> +
>> +MODULE_DESCRIPTION("QCOM Flash LED driver");
>> +MODULE_LICENSE("GPL");
>> -- 
>> 2.25.1
>
  
Dylan Van Assche Nov. 1, 2022, 5:39 p.m. UTC | #5
Hi Fenglin,

> On 2022/10/31 18:34, Dylan Van Assche wrote:
> > 
> > Hi Fenglin,
> > 
> > Thanks for submitting these patches! They are really nice!
> > I tested these patches on an SDM845 based device as the downstream
> > driver is the same for the PMI8998 compared to the mentioned PMICs
> > in
> > this patchseries.
> > 
> > Tested-by: Dylan Van Assche <me@dylanvanassche.be> # sdm845-shift-
> > axolotl + pmi8998
> > 
> Thanks for testing the patch at your side, Dylan!
> 
> > > > Add initial driver to support flash LED module found in
> > > > Qualcomm
> > > > Technologies, Inc. PMICs. The flash module can have 3 or 4
> > > > channels
> > > > and each channel can be controlled indepedently and support
> > > > full >
> > > > scale
> > > > current up to 1.5 A. It also supports connecting two channels >
> > > > together
> > > > to supply one LED component with full scale current up to 2 A.
> > > > In >
> > > > that
> > > > case, the current will be split on each channel symmetrically
> > > > and
> > > > the
> > > > channels will be enabled and disabled at the same time.
> > > > 
> > > > Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
> > > > Tested-by: Luca Weiss <luca.weiss@fairphone.com> # > sm7225-
> > > > fairphone-fp4 + pm6150l
> > > > ---
> > > >   drivers/leds/flash/Kconfig           |  15 +
> > > >   drivers/leds/flash/Makefile          |   1 +
> > > >   drivers/leds/flash/leds-qcom-flash.c | 700 >
> > > > +++++++++++++++++++++++++++
> > > >   3 files changed, 716 insertions(+)
> > > >   create mode 100644 drivers/leds/flash/leds-qcom-flash.c
> > > > 
> > > > diff --git a/drivers/leds/flash/Kconfig
> > > > b/drivers/leds/flash/Kconfig
> > > > index d3eb689b193c..f36a60409290 100644
> > > > --- a/drivers/leds/flash/Kconfig
> > > > +++ b/drivers/leds/flash/Kconfig
> > > > @@ -61,6 +61,21 @@ config LEDS_MT6360
> > > >            Independent current sources supply for each flash
> > > > LED >
> > > > support torch
> > > >            and strobe mode.
> > > >   
> > > > +config LEDS_QCOM_FLASH
> > > > +       tristate "LED support for flash module inside Qualcomm
> > > > >
> > > > Technologies, Inc. PMIC"
> > > > +       depends on MFD_SPMI_PMIC || COMPILE_TEST
> > > > +       depends on LEDS_CLASS && OF
> > > > +       depends on V4L2_FLASH_LED_CLASS ||
> > > > !V4L2_FLASH_LED_CLASS
> > > > +       select REGMAP
> > > > +       help
> > > > +         This option enables support for the flash module
> > > > found in
> > > > > Qualcomm
> > > > +         Technologies, Inc. PMICs. The flash module can have 3
> > > > or
> > > > 4 > flash LED
> > > > +         channels and each channel is programmable to support
> > > > up
> > > > to > 1.5 A full
> > > > +         scale current. It also supports connecting two
> > > > channels'
> > > > > output together
> > > > +         to supply one LED component to achieve current up to
> > > > 2 A.
> > > > > In such case,
> > > > +         the total LED currentwill be split symmetrically on
> > > > each
> > > > > channel and
> > > > +         they will be enabled/disabled at the same time.
> > > > +
> > > >   config LEDS_RT4505
> > > >          tristate "LED support for RT4505 flashlight
> > > > controller"
> > > >          depends on I2C && OF
> > > > diff --git a/drivers/leds/flash/Makefile >
> > > > b/drivers/leds/flash/Makefile
> > > > index 0acbddc0b91b..8a60993f1a25 100644
> > > > --- a/drivers/leds/flash/Makefile
> > > > +++ b/drivers/leds/flash/Makefile
> > > > @@ -6,6 +6,7 @@ obj-$(CONFIG_LEDS_AS3645A)      += leds-
> > > > as3645a.o
> > > >   obj-$(CONFIG_LEDS_KTD2692)     += leds-ktd2692.o
> > > >   obj-$(CONFIG_LEDS_LM3601X)     += leds-lm3601x.o
> > > >   obj-$(CONFIG_LEDS_MAX77693)    += leds-max77693.o
> > > > +obj-$(CONFIG_LEDS_QCOM_FLASH)  += leds-qcom-flash.o
> > > >   obj-$(CONFIG_LEDS_RT4505)      += leds-rt4505.o
> > > >   obj-$(CONFIG_LEDS_RT8515)      += leds-rt8515.o
> > > >   obj-$(CONFIG_LEDS_SGM3140)     += leds-sgm3140.o
> > > > diff --git a/drivers/leds/flash/leds-qcom-flash.c >
> > > > b/drivers/leds/flash/leds-qcom-flash.c
> > > > new file mode 100644
> > > > index 000000000000..a9fcf61600c3
> > > > --- /dev/null
> > > > +++ b/drivers/leds/flash/leds-qcom-flash.c
> > > > @@ -0,0 +1,700 @@
> > > > +// SPDX-License-Identifier: GPL-2.0-only
> > > > +/*
> > > > + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All
> > > > rights
> > > > > reserved.
> > > > + */
> > > > +
> > > > +#include <linux/bitfield.h>
> > > > +#include <linux/bits.h>
> > > > +#include <linux/leds.h>
> > > > +#include <linux/led-class-flash.h>
> > > > +#include <linux/module.h>
> > > > +#include <linux/platform_device.h>
> > > > +#include <linux/property.h>
> > > > +#include <linux/regmap.h>
> > > > +#include <media/v4l2-flash-led-class.h>
> > > > +
> > > > +/* registers definitions */
> > > > +#define FLASH_TYPE_REG                 0x04
> > > > +#define FLASH_TYPE_VAL                 0x18
> > > > +
> > > > +#define FLASH_SUBTYPE_REG              0x05
> > > > +#define FLASH_SUBTYPE_3CH_VAL          0x04
> > 
> > PMI8998 has also a 3 channel flash subtype, but reports 0x03 as
> > subtype. The driver won't probe because of this since the subtype
> > did
> > not match. Changing this value to 0x03 made this driver work on
> > SDM845
> > based device as well with PMI8998. Would you consider supporting
> > SDM845+PMI8998 as well?
> > 
> I just double checked, flash module in PMI8998 (with subtype 0x3) has
> very similar register definition as the flash module in PM8150C (with
> subtype 0x4) that the driver is intended to support, it's good know
> that 
> it's 99% work.
> I can add the 0x3 subtype support but the only problem is I couldn't 
> find a device with PMI8998 to test it out. Would it be good if I add
> the 
> support and rely on your test result?

Sure! I already have a branch locally to test your patches, happy to
help! I have an SDM845 device here with PMI8998 with 2 LEDs: cold and
warm white.

> 
> > > > +#define FLASH_SUBTYPE_4CH_VAL          0x07
> > > > +
> > > > +#define FLASH_TIMER_EN_BIT             BIT(7)
> > > > +#define FLASH_TIMER_VAL_MASK           GENMASK(6, 0)
> > > > +#define FLASH_TIMER_STEP_MS            10
> > > > +
> > > > +#define FLASH_STROBE_HW_SW_SEL_BIT     BIT(2)
> > > > +#define SW_STROBE_VAL                  0
> > > > +#define HW_STROBE_VAL                  1
> > > > +#define FLASH_HW_STROBE_TRIGGER_SEL_BIT        BIT(1)
> > > > +#define STROBE_LEVEL_TRIGGER_VAL       0
> > > > +#define STROBE_EDGE_TRIGGER_VAL                1
> > > > +#define FLASH_STROBE_POLARITY_BIT      BIT(0)
> > > > +#define STROBE_ACTIVE_HIGH_VAL         1
> > > > +
> > > > +#define FLASH_IRES_MASK_4CH            BIT(0)
> > > > +#define FLASH_IRES_MASK_3CH            GENMASK(1, 0)
> > > > +#define FLASH_IRES_12P5MA_VAL          0
> > > > +#define FLASH_IRES_5MA_VAL_4CH         1
> > > > +#define FLASH_IRES_5MA_VAL_3CH         3
> > > > +
> > > > +/* constants */
> > > > +#define FLASH_CURRENT_MAX_UA           1500000
> > > > +#define TORCH_CURRENT_MAX_UA           500000
> > > > +#define FLASH_TOTAL_CURRENT_MAX_UA     2000000
> > > > +#define FLASH_CURRENT_DEFAULT_UA       1000000
> > > > +#define TORCH_CURRENT_DEFAULT_UA       200000
> > > > +
> > > > +#define TORCH_IRES_UA                  5000
> > > > +#define FLASH_IRES_UA                  12500
> > > > +
> > > > +#define FLASH_TIMEOUT_MAX_US           1280000
> > > > +#define FLASH_TIMEOUT_STEP_US          10000
> > > > +
> > > > +enum hw_type {
> > > > +       QCOM_MVFLASH_3CH,
> > > > +       QCOM_MVFLASH_4CH,
> > > > +};
> > > > +
> > > > +enum led_mode {
> > > > +       FLASH_MODE,
> > > > +       TORCH_MODE,
> > > > +};
> > > > +
> > > > +enum led_strobe {
> > > > +       SW_STROBE,
> > > > +       HW_STROBE,
> > > > +};
> > > > +
> > > > +enum {
> > > > +       REG_STATUS1,
> > > > +       REG_STATUS2,
> > > > +       REG_STATUS3,
> > > > +       REG_CHAN_TIMER,
> > > > +       REG_ITARGET,
> > > > +       REG_MODULE_EN,
> > > > +       REG_IRESOLUTION,
> > > > +       REG_CHAN_STROBE,
> > > > +       REG_CHAN_EN,
> > > > +       REG_MAX_COUNT,
> > > > +};
> > > > +
> > > > +struct reg_field mvflash_3ch_regs[REG_MAX_COUNT] = {
> > > > +       REG_FIELD(0x08, 0, 7),                  /*
> > > > status1      */
> > > > +       REG_FIELD(0x09, 0, 7),                  /*
> > > > status2      */
> > > > +       REG_FIELD(0x0a, 0, 7),                  /*
> > > > status3      */
> > > > +       REG_FIELD_ID(0x40, 0, 7, 3, 1),         /*
> > > > chan_timer   */
> > > > +       REG_FIELD_ID(0x43, 0, 6, 3, 1),         /*
> > > > itarget      */
> > > > +       REG_FIELD(0x46, 7, 7),                  /*
> > > > module_en    */
> > > > +       REG_FIELD(0x47, 0, 5),                  /*
> > > > iresolution  */
> > > > +       REG_FIELD_ID(0x49, 0, 2, 3, 1),         /*
> > > > chan_strobe  */
> > > > +       REG_FIELD(0x4c, 0, 2),                  /*
> > > > chan_en      */
> > > > +};
> > 
> > These registers map perfectly for SDM845 with PMI8998 as well,
> > adding
> > support for this subtype (0x03) would be great.
> > 
> > > > +
> > > > +struct reg_field mvflash_4ch_regs[REG_MAX_COUNT] = {
> > > > +       REG_FIELD(0x06, 0, 7),                  /*
> > > > status1      */
> > > > +       REG_FIELD(0x07, 0, 6),                  /*
> > > > status2      */
> > > > +       REG_FIELD(0x09, 0, 7),                  /*
> > > > status3      */
> > > > +       REG_FIELD_ID(0x3e, 0, 7, 4, 1),         /*
> > > > chan_timer   */
> > > > +       REG_FIELD_ID(0x42, 0, 6, 4, 1),         /*
> > > > itarget      */
> > > > +       REG_FIELD(0x46, 7, 7),                  /*
> > > > module_en    */
> > > > +       REG_FIELD(0x49, 0, 3),                  /*
> > > > iresolution  */
> > > > +       REG_FIELD_ID(0x4a, 0, 6, 4, 1),         /*
> > > > chan_strobe  */
> > > > +       REG_FIELD(0x4e, 0, 3),                  /*
> > > > chan_en      */
> > > > +};
> > > > +
> > > > +struct qcom_flash_led {
> > > > +       struct qcom_flash_chip          *chip;
> > > > +       struct led_classdev_flash       flash;
> > > > +       struct v4l2_flash               *v4l2_flash;
> > > > +       u32                             max_flash_current_ma;
> > > > +       u32                             max_torch_current_ma;
> > > > +       u32                             max_timeout_ms;
> > > > +       u32                             flash_current_ma;
> > > > +       u32                             flash_timeout_ms;
> > > > +       u8                              *chan_id;
> > > > +       u8                              chan_count;
> > > > +       bool                            enabled;
> > > > +};
> > > > +
> > > > +struct qcom_flash_chip {
> > > > +       struct qcom_flash_led   *leds;
> > > > +       struct regmap_field     *r_fields[REG_MAX_COUNT];
> > > > +       struct device           *dev;
> > > > +       struct mutex            lock;
> > > > +       enum hw_type            hw_type;
> > > > +       u8                      leds_count;
> > > > +       u8                      max_channels;
> > > > +       u8                      chan_en_bits;
> > > > +};
> > > > +
> > > > +static int set_flash_module_en(struct qcom_flash_led *led,
> > > > bool
> > > > en)
> > > > +{
> > > > +       struct qcom_flash_chip *chip= led->chip;
> > > > +       u8 led_mask = 0, val;
> > > > +       int i, rc;
> > > > +
> > > > +       for (i = 0; i < led->chan_count; i++)
> > > > +               led_mask |= BIT(led->chan_id[i] - 1);
> > > > +
> > > > +       mutex_lock(&chip->lock);
> > > > +       if (en)
> > > > +               chip->chan_en_bits |= led_mask;
> > > > +       else
> > > > +               chip->chan_en_bits &= ~led_mask;
> > > > +
> > > > +       val = !!chip->chan_en_bits;
> > > > +       rc = regmap_field_write(chip->r_fields[REG_MODULE_EN],
> > > > val);
> > > > +       if (rc < 0)
> > > > +               dev_err(chip->dev, "write module_en failed,
> > > > rc=%d\n", > rc);
> > > > +       mutex_unlock(&chip->lock);
> > > > +
> > > > +       return rc;
> > > > +}
> > > > +
> > > > +static int set_flash_current(struct qcom_flash_led *led, u32 >
> > > > current_ma, enum led_mode mode)
> > > > +{
> > > > +       struct qcom_flash_chip *chip= led->chip;
> > > > +       u32 itarg_ua = current_ma * 1000 / led->chan_count + 1;
> > > > +       u32 ires_ua = (mode ==FLASH_MODE) ? FLASH_IRES_UA : >
> > > > TORCH_IRES_UA;
> > > > +       u8 val, shift, ires_mask =0, ires_val = 0, chan_id;
> > > > +       int i, rc;
> > > > +
> > > > +       /*
> > > > +        * Split the current across the channels and set the
> > > > +        * IRESOLUTION and ITARGET registers accordingly.
> > > > +        */
> > > > +       for (i = 0; i < led->chan_count; i++) {
> > > > +               chan_id = led->chan_id[i];
> > > > +               if (itarg_ua < ires_ua)
> > > > +                       val = 0;
> > > > +               else
> > > > +                       val = itarg_ua / ires_ua - 1;
> > > > +
> > > > +               rc = regmap_fields_write(chip-
> > > > > r_fields[REG_ITARGET], > chan_id - 1, val);
> > > > +               if (rc < 0)
> > > > +                       returnrc;
> > > > +
> > > > +               if (chip->hw_type == QCOM_MVFLASH_3CH) {
> > > > +                       shift = (chan_id - 1) * 2;
> > > > +                       ires_mask |= FLASH_IRES_MASK_3CH <<
> > > > shift;
> > > > +                       ires_val |= ((mode == FLASH_MODE) ?
> > > > +                               (FLASH_IRES_12P5MA_VAL <<
> > > > shift) :
> > > > +                               (FLASH_IRES_5MA_VAL_3CH <<
> > > > shift));
> > > > +               } else if (chip->hw_type == QCOM_MVFLASH_4CH) {
> > > > +                       shift = chan_id - 1;
> > > > +                       ires_mask |= FLASH_IRES_MASK_4CH <<
> > > > shift;
> > > > +                       ires_val |= ((mode == FLASH_MODE) ?
> > > > +                               (FLASH_IRES_12P5MA_VAL <<
> > > > shift) :
> > > > +                               (FLASH_IRES_5MA_VAL_4CH <<
> > > > shift));
> > > > +               }
> > > > +       }
> > > > +
> > > > +       return > regmap_field_update_bits(chip-
> > > > > r_fields[REG_IRESOLUTION], ires_mask, > ires_val);
> > > > +}
> > > > +
> > > > +static int set_flash_timeout(struct qcom_flash_led *led, u32 >
> > > > timeout_ms)
> > > > +{
> > > > +       struct qcom_flash_chip *chip= led->chip;
> > > > +       u8 val, chan_id;
> > > > +       int rc, i;
> > > > +
> > > > +       /* set SAFETY_TIMER for all the channels connected to
> > > > the >
> > > > same LED */
> > > > +       timeout_ms = min_t(u32, timeout_ms, led-
> > > > >max_timeout_ms);
> > > > +       for (i = 0; i < led->chan_count; i++) {
> > > > +               chan_id = led->chan_id[i];
> > > > +               val = timeout_ms / FLASH_TIMER_STEP_MS;
> > > > +               val = clamp_t(u8, val, 0,
> > > > FLASH_TIMER_VAL_MASK);
> > > > +               if (timeout_ms)
> > > > +                       val |= FLASH_TIMER_EN_BIT;
> > > > +
> > > > +               rc = > regmap_fields_write(chip-
> > > > > r_fields[REG_CHAN_TIMER], chan_id - 1, > val);
> > > > +               if (rc < 0)
> > > > +                       returnrc;
> > > > +       }
> > > > +
> > > > +       return 0;
> > > > +}
> > > > +
> > > > +static int set_flash_strobe(struct qcom_flash_led *led, enum >
> > > > led_strobe strobe, bool state)
> > > > +{
> > > > +       struct qcom_flash_chip *chip= led->chip;
> > > > +       u8 mask, val, chan_id = 0,chan_mask = 0;
> > > > +       int rc, i;
> > > > +
> > > > +       /* Set SW strobe config for all channels connected to
> > > > the
> > > > LED > */
> > > > +       for (i = 0; i < led->chan_count; i++) {
> > > > +               chan_id = led->chan_id[i];
> > > > +               if (strobe == SW_STROBE)
> > > > +                       val =
> > > > FIELD_PREP(FLASH_STROBE_HW_SW_SEL_BIT, > SW_STROBE_VAL);
> > > > +               else
> > > > +                       val =
> > > > FIELD_PREP(FLASH_STROBE_HW_SW_SEL_BIT, > HW_STROBE_VAL);
> > > > +
> > > > +               val |=
> > > > FIELD_PREP(FLASH_HW_STROBE_TRIGGER_SEL_BIT,
> > > > > STROBE_LEVEL_TRIGGER_VAL) |
> > > > +                       FIELD_PREP(FLASH_STROBE_POLARITY_BIT, >
> > > > STROBE_ACTIVE_HIGH_VAL);
> > > > +               rc = > regmap_fields_write(chip-
> > > > > r_fields[REG_CHAN_STROBE], chan_id - 1, > val);
> > > > +               if (rc < 0)
> > > > +                       returnrc;
> > > > +
> > > > +               chan_mask |= BIT(chan_id - 1);
> > > > +       }
> > > > +
> > > > +       /* enable/disable flash channels */
> > > > +       mask = chan_mask;
> > > > +       val = state ? mask : 0;
> > > > +       rc = regmap_field_update_bits(chip-
> > > > >r_fields[REG_CHAN_EN],
> > > > > mask, val);
> > > > +       if (rc < 0)
> > > > +               return rc;
> > > > +
> > > > +       led->enabled = state;
> > > > +       return 0;
> > > > +}
> > > > +
> > > > +static int qcom_flash_brightness_set(struct led_classdev_flash
> > > > >
> > > > *fled_cdev, u32 brightness)
> > > > +{
> > > > +       struct qcom_flash_led *led = container_of(fled_cdev,
> > > > struct
> > > > > qcom_flash_led, flash);
> > > > +
> > > > +       led->flash_current_ma = min_t(u32, led-
> > > > > max_flash_current_ma, > brightness / 1000);
> > > > +       return 0;
> > > > +}
> > 
> > This doesn't seem to work in torch mode for me on PMI8998. If the
> > brightness is 0, the torch is OFF as expected, but when the torch
> > is
> > ON, you cannot control the brightness. The brightness is the same
> > for
> > [1, 255]. If the hardware cannot change the brightness in torch
> > mode,
> > it would be nice to report a max_brightness value of 1 instead of
> > 255
> > for userspace. This could be a limitation of the PMI8998, not sure.
> > Do you have any insights here? This driver is already 99% working
> > for
> > SDM845+PMI8998.
> > 
> > Flash mode works great, timeout & brightness can be configured just
> > fine.
> > 
> 
> Here, function qcom_flash_brightness_set() is used for setting 
> brightness in flash mode and it was supposed to be working with 
> following commands combination:
>         echo xxx > flash_brightness
>         echo 1 > flash_strobe  (you will need to toggle flash_strobe
> when you 
> enabling it again)
> 
> Can you check if you can see the brightness change in flash mode when
> you updating the flash_brightness value with these commands?
> 
> You can echo any value between [0, max_flash_brightness] into the 
> flash_brightness, there is a "max_flash_brightness" sysfs node and
> the 
> value comes from DT property "flash-max-microamp", ex. my dtsi node
> has 
> "flash-max-microamp = <2000000>;" defined so I am having following
> value 
> for max_flash_brightness:
> 
> kalama:/sys/class/leds/white:flash-0 # cat max_flash_brightness
> 2000000
> 
> And by default flash mode uses 12500uA resolution so you won't see 
> brightness change when you update it with values between [1, 12500].

Yes, this works perfectly fine on PMI8998. I can adjust the flash
brightness and flash timeout perfectly.

> 
> If you want to update the brightness for torch node, you can directly
> update the "brightness" node with values between [0, 255], and it's 
> mapping to the torch current between [0, led-max-microamp]. 
> "led-max-microamp" is also has value coming from the DT property.
> 
> This worked at my side on both pm8150C and pm8550.I think it should
> work 
> on PMI8998 as well because the flash module in it is very similar to
> the 
> one in PM8150c. Let me know if you still see such issues at your
> side.
> Thanks

Only here I have an issue with PMI8998: the "brightness" nodes should
change the brightness of the torch, but it doesn't make a difference
here. When I do:

- echo 0 > brightness --> LED turns OFF
- echo 255 > brightness --> LED turns ON
- echo 100 > brightness --> LED is still ON, but brightness is the same
as with 255.

Could it be that PMI8998 is slightly different here than with PM8150c
for example? Maybe it doesn't support brightness for torch?

Here's my DTS:

*PMI8998*

pmi8998_flash: led-controller@d300 {
	compatible = "qcom,pm6150l-flash-led", "qcom,spmi-flash-led";
	reg = <0xd300>;
	status = "disabled";
};

*SDM845 SHIFT axolotl*

&pmi8998_flash {
	status = "okay";

	led-0 {
		function = LED_FUNCTION_FLASH;
		color = <LED_COLOR_ID_WHITE>;
		led-sources = <1>;
		led-max-microamp = <180000>;
		flash-max-microamp = <1000000>;
		flash-max-timeout-us = <1280000>;
	};

	led-1 {
		function = LED_FUNCTION_FLASH;
		color = <LED_COLOR_ID_YELLOW>;
		led-sources = <2>;
		led-max-microamp = <180000>;
		flash-max-microamp = <1000000>;
		flash-max-timeout-us = <1280000>;
	};
};


> 
> > > > +
> > > > +static int qcom_flash_timeout_set(struct led_classdev_flash >
> > > > *fled_cdev, u32 timeout)
> > > > +{
> > > > +       struct qcom_flash_led *led = container_of(fled_cdev,
> > > > struct
> > > > > qcom_flash_led, flash);
> > > > +
> > > > +       led->flash_timeout_ms = timeout / 1000;
> > > > +       return 0;
> > > > +}
> > > > +
> > > > +static int qcom_flash_strobe_set(struct led_classdev_flash >
> > > > *fled_cdev, bool state)
> > > > +{
> > > > +       struct qcom_flash_led *led = container_of(fled_cdev,
> > > > struct
> > > > > qcom_flash_led, flash);
> > > > +       int rc;
> > > > +
> > > > +       rc = set_flash_current(led, led->flash_current_ma, >
> > > > FLASH_MODE);
> > > > +       if (rc < 0)
> > > > +               return rc;
> > > > +
> > > > +       rc = set_flash_timeout(led, led->flash_timeout_ms);
> > > > +       if (rc < 0)
> > > > +               return rc;
> > > > +
> > > > +       rc = set_flash_module_en(led, state);
> > > > +       if (rc < 0)
> > > > +               return rc;
> > > > +
> > > > +       return set_flash_strobe(led,SW_STROBE, state);
> > > > +}
> > > > +
> > > > +static int qcom_flash_strobe_get(struct led_classdev_flash >
> > > > *fled_cdev, bool *state)
> > > > +{
> > > > +       struct qcom_flash_led *led = container_of(fled_cdev,
> > > > struct
> > > > > qcom_flash_led, flash);
> > > > +
> > > > +       *state = led->enabled;
> > > > +       return 0;
> > > > +}
> > > > +
> > > > +static int qcom_flash_fault_get(struct led_classdev_flash >
> > > > *fled_cdev, u32 *fault)
> > > > +{
> > > > +       struct qcom_flash_led *led = container_of(fled_cdev,
> > > > struct
> > > > > qcom_flash_led, flash);
> > > > +       struct qcom_flash_chip *chip= led->chip;
> > > > +       u8 shift, chan_id = 0, chan_mask = 0;
> > > > +       u8 ot_mask = 0, oc_mask = 0, uv_mask = 0;
> > > > +       u32 val, fault_sts = 0;
> > > > +       int i, rc;
> > > > +
> > > > +       rc = regmap_field_read(chip->r_fields[REG_STATUS1],
> > > > &val);
> > > > +       if (rc < 0)
> > > > +               return rc;
> > > > +
> > > > +       for (i = 0; i < led->chan_count; i++) {
> > > > +               chan_id = led->chan_id[i];
> > > > +               shift = (chan_id - 1) * 2;
> > > > +               if (val & BIT(shift))
> > > > +                       fault_sts |= LED_FAULT_SHORT_CIRCUIT;
> > > > +               chan_mask |= BIT(chan_id - 1);
> > > > +       }
> > > > +
> > > > +       rc = regmap_field_read(chip->r_fields[REG_STATUS2],
> > > > &val);
> > > > +       if (rc < 0)
> > > > +               return rc;
> > > > +
> > > > +       if (chip->hw_type == QCOM_MVFLASH_3CH) {
> > > > +               ot_mask = 0x0f;
> > > > +               oc_mask = 0xe0;
> > > > +               uv_mask = 0x10;
> > > > +       } else if (chip->hw_type == QCOM_MVFLASH_4CH) {
> > > > +               ot_mask = 0x70;
> > > > +               oc_mask = 0x0e;
> > > > +               uv_mask = 0x01;
> > > > +       }
> > > > +
> > > > +       if (val & ot_mask)
> > > > +               fault_sts |= LED_FAULT_OVER_TEMPERATURE;
> > > > +       if (val & oc_mask)
> > > > +               fault_sts |= LED_FAULT_OVER_CURRENT;
> > > > +       if (val & uv_mask)
> > > > +               fault_sts |= LED_FAULT_INPUT_VOLTAGE;
> > > > +
> > > > +       rc = regmap_field_read(chip->r_fields[REG_STATUS3],
> > > > &val);
> > > > +       if (rc < 0)
> > > > +               return rc;
> > > > +
> > > > +       if (chip->hw_type == QCOM_MVFLASH_3CH) {
> > > > +               if (val & chan_mask)
> > > > +                       fault_sts |= LED_FAULT_TIMEOUT;
> > > > +       } else if (chip->hw_type == QCOM_MVFLASH_4CH) {
> > > > +               for (i = 0; i < led->chan_count; i++) {
> > > > +                       chan_id = led->chan_id[i];
> > > > +                       shift = (chan_id - 1) * 2;
> > > > +                       if (val & BIT(shift))
> > > > +                               fault_sts |= LED_FAULT_TIMEOUT;
> > > > +               }
> > > > +       }
> > > > +
> > > > +       *fault = fault_sts;
> > > > +       return 0;
> > > > +}
> > > > +
> > > > +static int qcom_flash_led_brightness_set(struct led_classdev >
> > > > *led_cdev,
> > > > +                                       enum led_brightness >
> > > > brightness)
> > > > +{
> > > > +       struct led_classdev_flash *fled_cdev =
> > > > +               container_of(led_cdev, struct
> > > > led_classdev_flash, >
> > > > led_cdev);
> > > > +       struct qcom_flash_led *led =
> > > > +               container_of(fled_cdev, struct qcom_flash_led,
> > > > >
> > > > flash);
> > > > +       u32 current_ma = brightness * led->max_torch_current_ma
> > > > / >
> > > > LED_FULL;
> > > > +       bool enable = !!brightness;
> > > > +       int rc;
> > > > +
> > > > +       rc = set_flash_current(led, current_ma, TORCH_MODE);
> > > > +       if (rc < 0)
> > > > +               return rc;
> > > > +
> > > > +       /* disable flash timeout fortorch LED */
> > > > +       rc = set_flash_timeout(led, 0);
> > > > +       if (rc < 0)
> > > > +               return rc;
> > > > +
> > > > +       rc = set_flash_module_en(led, enable);
> > > > +       if (rc < 0)
> > > > +               return rc;
> > > > +
> > > > +       return set_flash_strobe(led,SW_STROBE, enable);
> > > > +}
> > > > +
> > > > +static const struct led_flash_ops qcom_flash_ops = {
> > > > +       .flash_brightness_set = qcom_flash_brightness_set,
> > > > +       .strobe_set = qcom_flash_strobe_set,
> > > > +       .strobe_get = qcom_flash_strobe_get,
> > > > +       .timeout_set = qcom_flash_timeout_set,
> > > > +       .fault_get = qcom_flash_fault_get,
> > > > +};
> > > > +
> > > > +#if IS_ENABLED(CONFIG_V4L2_FLASH_LED_CLASS)
> > > > +static int qcom_flash_external_strobe_set(struct v4l2_flash >
> > > > *v4l2_flash, bool enable)
> > > > +{
> > > > +       struct led_classdev_flash *flash = v4l2_flash-
> > > > >fled_cdev;
> > > > +       struct qcom_flash_led *led = container_of(flash, struct
> > > > >
> > > > qcom_flash_led, flash);
> > > > +       int rc;
> > > > +
> > > > +       rc = set_flash_module_en(led, enable);
> > > > +       if (rc < 0)
> > > > +               return rc;
> > > > +
> > > > +       if (enable)
> > > > +               return set_flash_strobe(led, HW_STROBE, true);
> > > > +       else
> > > > +               return set_flash_strobe(led, SW_STROBE, false);
> > > > +}
> > > > +
> > > > +static enum led_brightness
> > > > qcom_flash_intensity_to_led_brightness(
> > > > +               struct v4l2_flash *v4l2_flash, s32 intensity)
> > > > +{
> > > > +       struct led_classdev_flash *flash = v4l2_flash-
> > > > >fled_cdev;
> > > > +       struct qcom_flash_led *led = container_of(flash, struct
> > > > >
> > > > qcom_flash_led, flash);
> > > > +       u32 current_ma = intensity/ 1000;
> > > > +
> > > > +       current_ma = min_t(u32, current_ma, > led-
> > > > > max_torch_current_ma);
> > > > +       if (!current_ma)
> > > > +               return LED_OFF;
> > > > +
> > > > +       return current_ma * LED_FULL/ led-
> > > > >max_torch_current_ma;
> > > > +}
> > > > +
> > > > +static s32 qcom_flash_brightness_to_led_intensity(struct
> > > > v4l2_flash > *v4l2_flash,
> > > > +                                       enum led_brightness >
> > > > brightness)
> > > > +{
> > > > +       struct led_classdev_flash *flash = v4l2_flash-
> > > > >fled_cdev;
> > > > +       struct qcom_flash_led *led = container_of(flash, struct
> > > > >
> > > > qcom_flash_led, flash);
> > > > +
> > > > +       return (brightness * led->max_torch_current_ma * 1000)
> > > > / >
> > > > LED_FULL;
> > > > +}
> > > > +
> > > > +static const struct v4l2_flash_ops qcom_v4l2_flash_ops = {
> > > > +       .external_strobe_set = qcom_flash_external_strobe_set,
> > > > +       .intensity_to_led_brightness= >
> > > > qcom_flash_intensity_to_led_brightness,
> > > > +       .led_brightness_to_intensity= >
> > > > qcom_flash_brightness_to_led_intensity,
> > > > +};
> > > > +
> > > > +static int qcom_flash_v4l2_init(struct qcom_flash_led *led,
> > > > struct
> > > > > fwnode_handle *fwnode)
> > > > +{
> > > > +       struct v4l2_flash_config v4l2_cfg = {0};
> > > > +       struct led_flash_setting *s = &v4l2_cfg.intensity;
> > > > +
> > > > +       if (!(led->flash.led_cdev.flags & LED_DEV_CAP_FLASH))
> > > > +               return 0;
> > > > +
> > > > +       s->min = s->step = TORCH_IRES_UA * led->chan_count;
> > > > +       s->max = led->max_torch_current_ma * 1000;
> > > > +       s->val = min_t(u32, s->max, TORCH_CURRENT_DEFAULT_UA);
> > > > +
> > > > +       strscpy(v4l2_cfg.dev_name, >led->flash.led_cdev.dev-
> > > > > kobj.name,
> > > > +                                       sizeof(v4l2_cfg.dev_nam
> > > > e));
> > > > +       v4l2_cfg.has_external_strobe= 1;
> > > > +       v4l2_cfg.flash_faults = LED_FAULT_INPUT_VOLTAGE | >
> > > > LED_FAULT_OVER_CURRENT |
> > > > +               LED_FAULT_SHORT_CIRCUIT |
> > > > LED_FAULT_OVER_TEMPERATURE > | LED_FAULT_TIMEOUT;
> > > > +
> > > > +       led->v4l2_flash = v4l2_flash_init(led->chip->dev,
> > > > fwnode, >
> > > > &led->flash,
> > > > +                                       &qcom_v4l2_flash_ops, >
> > > > &v4l2_cfg);
> > > > +       return PTR_ERR_OR_ZERO(led->v4l2_flash);
> > > > +}
> > > > +# else
> > > > +static int qcom_flash_v4l2_init(struct qcom_flash_led *led,
> > > > struct
> > > > > fwnode_handle *fwnode)
> > > > +{
> > > > +       return 0;
> > > > +}
> > > > +#endif
> > > > +
> > > > +static int qcom_flash_register_led_device(struct device
> > > > *parent,
> > > > +               struct fwnode_handle *node, struct
> > > > qcom_flash_led >
> > > > *led)
> > > > +{
> > > > +       struct qcom_flash_chip *chip= led->chip;
> > > > +       struct led_init_data init_data;
> > > > +       struct led_classdev_flash *flash;
> > > > +       struct led_flash_setting *s;
> > > > +       u32 count, val;
> > > > +       u32 channels[4];
> > > > +       int i, rc;
> > > > +
> > > > +       flash = &led->flash;
> > > > +       count = fwnode_property_count_u32(node, "led-sources");
> > > > +       if (count <= 0) {
> > > > +               dev_err(chip->dev, "No led-sources
> > > > specified\n");
> > > > +               return -ENODEV;
> > > > +       }
> > > > +
> > > > +       if (count > chip->max_channels) {
> > > > +               dev_err(chip->dev, "led-sources count %u
> > > > exceeds >
> > > > maximum channel count %u\n",
> > > > +                               count, chip->max_channels);
> > > > +               return -EINVAL;
> > > > +       }
> > > > +
> > > > +       rc = fwnode_property_read_u32_array(node, "led-
> > > > sources", >
> > > > channels, count);
> > > > +       if (rc < 0) {
> > > > +               dev_err(chip->dev, "get led-sources failed,
> > > > rc=%d\n", > rc);
> > > > +               return rc;
> > > > +       }
> > > > +
> > > > +       led->chan_count = count;
> > > > +       led->chan_id = devm_kcalloc(chip->dev, count,
> > > > sizeof(u8), >
> > > > GFP_KERNEL);
> > > > +       if (!led->chan_id)
> > > > +               return -ENOMEM;
> > > > +
> > > > +       for (i = 0; i < count; i++) {
> > > > +               if (channels[i] > chip->max_channels) {
> > > > +                       dev_err(chip->dev, "led-source out of
> > > > HW >
> > > > support range [1-%u]\n",
> > > > +                                       chip->max_channels);
> > > > +                       return-EINVAL;
> > > > +               }
> > > > +
> > > > +               led->chan_id[i] = channels[i];
> > > > +       }
> > > > +
> > > > +       rc = fwnode_property_read_u32(node, "led-max-microamp",
> > > > >
> > > > &val);
> > > > +       if (rc < 0) {
> > > > +               dev_err(chip->dev, "Get led-max-microamp
> > > > failed, >
> > > > rc=%d\n", rc);
> > > > +               return rc;
> > > > +       }
> > > > +
> > > > +       if (!val) {
> > > > +               dev_err(chip->dev, "led-max-microamp shouldn't
> > > > be >
> > > > 0\n");
> > > > +               return -EINVAL;
> > > > +       }
> > > > +
> > > > +       val = min_t(u32, val, TORCH_CURRENT_MAX_UA * > led-
> > > > > chan_count);
> > > > +       led->max_torch_current_ma = val / 1000;
> > > > +
> > > > +       if (fwnode_property_present(node, "flash-max-
> > > > microamp")) {
> > > > +               flash->led_cdev.flags |= LED_DEV_CAP_FLASH;
> > > > +               rc = fwnode_property_read_u32(node, > "flash-
> > > > max-
> > > > microamp", &val);
> > > > +               if (rc < 0) {
> > > > +                       dev_err(chip->dev, "Get flash-max-
> > > > microamp
> > > > > failed, rc=%d\n", rc);
> > > > +                       returnrc;
> > > > +               }
> > > > +
> > > > +               val = min_t(u32, val, FLASH_CURRENT_MAX_UA * >
> > > > led-
> > > > > chan_count);
> > > > +               val = min_t(u32, val,
> > > > FLASH_TOTAL_CURRENT_MAX_UA);
> > > > +               s = &flash->brightness;
> > > > +               s->min = s->step = FLASH_IRES_UA * led-
> > > > >chan_count;
> > > > +               s->max = val;
> > > > +               s->val = min_t(u32, val,
> > > > FLASH_CURRENT_DEFAULT_UA);
> > > > +               led->max_flash_current_ma = val / 1000;
> > > > +               led->flash_current_ma = s->val / 1000;
> > > > +
> > > > +               rc = fwnode_property_read_u32(node, > "flash-
> > > > max-
> > > > timeout-us", &val);
> > > > +               if (rc < 0) {
> > > > +                       dev_err(chip->dev, "Get flash-max-
> > > > timeout-
> > > > us > failed, rc=%d\n", rc);
> > > > +                       returnrc;
> > > > +               }
> > > > +
> > > > +               val = min_t(u32, val, FLASH_TIMEOUT_MAX_US);
> > > > +               s = &flash->timeout;
> > > > +               s->min = s->step = FLASH_TIMEOUT_STEP_US;
> > > > +               s->val = s->max = val;
> > > > +               led->max_timeout_ms = led->flash_timeout_ms =
> > > > val /
> > > > > 1000;
> > > > +
> > > > +               flash->ops = &qcom_flash_ops;
> > > > +       }
> > > > +
> > > > +       flash->led_cdev.brightness_set_blocking = >
> > > > qcom_flash_led_brightness_set;
> > > > +       init_data.fwnode = node;
> > > > +       init_data.devicename = NULL;
> > > > +       init_data.default_label = NULL;
> > > > +       init_data.devname_mandatory = false;
> > > > +       rc = devm_led_classdev_flash_register_ext(parent,
> > > > flash, >
> > > > &init_data);
> > > > +       if (rc < 0) {
> > > > +               dev_err(chip->dev, "Register flash LED classdev
> > > > >
> > > > failed, rc=%d\n", rc);
> > > > +               return rc;
> > > > +       }
> > > > +
> > > > +       return qcom_flash_v4l2_init(led, node);
> > > > +}
> > > > +
> > > > +static int qcom_flash_led_probe(struct platform_device *pdev)
> > > > +{
> > > > +       struct qcom_flash_chip *chip;
> > > > +       struct qcom_flash_led *led;
> > > > +       struct fwnode_handle *child;
> > > > +       struct device *dev = &pdev->dev;
> > > > +       struct regmap *map;
> > > > +       struct reg_field *regs;
> > > > +       int count, i, rc;
> > > > +       u32 val, reg_base;
> > > > +
> > > > +       chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL);
> > > > +       if (!chip)
> > > > +               return -ENOMEM;
> > > > +
> > > > +       map = dev_get_regmap(dev->parent, NULL);
> > > > +       if (!map) {
> > > > +               dev_err(dev, "Failed to get parent regmap\n");
> > > > +               return -EINVAL;
> > > > +       }
> > > > +
> > > > +       rc = fwnode_property_read_u32(dev->fwnode, "reg",
> > > > &reg_base);
> > > > +       if (rc < 0) {
> > > > +               dev_err(dev, "Failed to get register base
> > > > address,
> > > > > rc=%d\n", rc);
> > > > +               return rc;
> > > > +       }
> > > > +
> > > > +       rc = regmap_read(map, reg_base + FLASH_TYPE_REG, &val);
> > > > +       if (rc < 0) {
> > > > +               dev_err(dev, "Read flash module type failed, >
> > > > rc=%d\n", rc);
> > > > +               return rc;
> > > > +       }
> > > > +
> > > > +       if (val != FLASH_TYPE_VAL){
> > > > +               dev_err(dev, "type %#x is not a flash
> > > > module\n", >
> > > > val);
> > > > +               return -ENODEV;
> > > > +       }
> > > > +
> > > > +       rc = regmap_read(map, reg_base + FLASH_SUBTYPE_REG,
> > > > &val);
> > > > +       if (rc < 0) {
> > > > +               dev_err(dev, "Read flash module subtype failed,
> > > > >
> > > > rc=%d\n", rc);
> > > > +               return rc;
> > > > +       }
> > > > +
> > > > +       if (val == FLASH_SUBTYPE_3CH_VAL) {
> > > > +               chip->hw_type = QCOM_MVFLASH_3CH;
> > > > +               chip->max_channels = 3;
> > > > +               regs = mvflash_3ch_regs;
> > > > +       } else if (val == FLASH_SUBTYPE_4CH_VAL) {
> > > > +               chip->hw_type = QCOM_MVFLASH_4CH;
> > > > +               chip->max_channels = 4;
> > > > +               regs = mvflash_4ch_regs;
> > > > +       } else {
> > > > +               dev_err(dev, "flash subtype %#x is not yet >
> > > > supported\n", val);
> > > > +               return -ENODEV;
> > > > +       }
> > > > +
> > > > +       for (i = 0; i < REG_MAX_COUNT; i++)
> > > > +               regs[i].reg += reg_base;
> > > > +
> > > > +       rc = devm_regmap_field_bulk_alloc(dev, map, chip-
> > > > >r_fields,
> > > > > regs, REG_MAX_COUNT);
> > > > +       if (rc < 0) {
> > > > +               dev_err(dev, "failed to alloc regmap filed,
> > > > rc=%d\n", > rc);
> > > > +               return rc;
> > > > +       }
> > > > +
> > > > +       chip->dev = dev;
> > > > +       platform_set_drvdata(pdev, chip);
> > > > +       mutex_init(&chip->lock);
> > > > +       count = device_get_child_node_count(dev);
> > > > +       if (count == 0 || count > chip->max_channels) {
> > > > +               dev_err(dev, "No child or child count exceeds
> > > > %d\n", > chip->max_channels);
> > > > +               return -EINVAL;
> > > > +       }
> > > > +
> > > > +       chip->leds = devm_kcalloc(dev, count, sizeof(*chip-
> > > > >leds),
> > > > > GFP_KERNEL);
> > > > +       if (!chip->leds)
> > > > +               return -ENOMEM;
> > > > +
> > > > +       device_for_each_child_node(dev, child) {
> > > > +               led = &chip->leds[chip->leds_count];
> > > > +               led->chip = chip;
> > > > +               rc = qcom_flash_register_led_device(dev, child,
> > > > led);
> > > > +               if (rc < 0)
> > > > +                       goto release;
> > > > +
> > > > +               chip->leds_count++;
> > > > +       }
> > > > +
> > > > +       return 0;
> > > > +release:
> > > > +       while (chip->leds && chip->leds_count--)
> > > > +               v4l2_flash_release(chip->leds[chip-
> > > > > leds_count].v4l2_> flash);
> > > > +       return rc;
> > > > +}
> > > > +
> > > > +static int qcom_flash_led_remove(struct platform_device *pdev)
> > > > +{
> > > > +       struct qcom_flash_chip *chip=
> > > > platform_get_drvdata(pdev);
> > > > +
> > > > +       while (chip->leds_count--)
> > > > +               v4l2_flash_release(chip->leds[chip-
> > > > > leds_count].v4l2_> flash);
> > > > +
> > > > +       mutex_destroy(&chip->lock);
> > > > +       return 0;
> > > > +}
> > > > +
> > > > +static const struct of_device_id qcom_flash_led_match_table[]
> > > > = {
> > > > +       { .compatible = "qcom,spmi-flash-led" },
> > > > +       { }
> > > > +};
> > > > +
> > > > +static struct platform_driver qcom_flash_led_driver = {
> > > > +       .driver = {
> > > > +               .name = "leds-qcom-flash",
> > > > +               .of_match_table = qcom_flash_led_match_table,
> > > > +       },
> > > > +       .probe = qcom_flash_led_probe,
> > > > +       .remove = qcom_flash_led_remove,
> > > > +};
> > > > +
> > > > +module_platform_driver(qcom_flash_led_driver);
> > > > +
> > > > +MODULE_DESCRIPTION("QCOM Flash LED driver");
> > > > +MODULE_LICENSE("GPL");
> > 
> > Kind regards,
> > Dylan Van Assche

Kind regards,
Dylan Van Assche
  
Fenglin Wu Nov. 2, 2022, 7:25 a.m. UTC | #6
Hi Dylan,


On 2022/11/2 1:39, Dylan Van Assche wrote:
> 
> Hi Fenglin,
> 
>> On 2022/10/31 18:34, Dylan Van Assche wrote:
>>>
>>> Hi Fenglin,
>>>
>>> Thanks for submitting these patches! They are really nice!
>>> I tested these patches on an SDM845 based device as the downstream
>>> driver is the same for the PMI8998 compared to the mentioned PMICs
>>> in
>>> this patchseries.
>>>
>>> Tested-by: Dylan Van Assche <me@dylanvanassche.be> # sdm845-shift-
>>> axolotl + pmi8998
>>>
>> Thanks for testing the patch at your side, Dylan!
>>
>>>>> Add initial driver to support flash LED module found in
>>>>> Qualcomm
>>>>> Technologies, Inc. PMICs. The flash module can have 3 or 4
>>>>> channels
>>>>> and each channel can be controlled indepedently and support
>>>>> full >
>>>>> scale
>>>>> current up to 1.5 A. It also supports connecting two channels >
>>>>> together
>>>>> to supply one LED component with full scale current up to 2 A.
>>>>> In >
>>>>> that
>>>>> case, the current will be split on each channel symmetrically
>>>>> and
>>>>> the
>>>>> channels will be enabled and disabled at the same time.
>>>>>
>>>>> Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
>>>>> Tested-by: Luca Weiss <luca.weiss@fairphone.com> # > sm7225-
>>>>> fairphone-fp4 + pm6150l
>>>>> ---
>>>>>    drivers/leds/flash/Kconfig           |  15 +
>>>>>    drivers/leds/flash/Makefile          |   1 +
>>>>>    drivers/leds/flash/leds-qcom-flash.c | 700 >
>>>>> +++++++++++++++++++++++++++
>>>>>    3 files changed, 716 insertions(+)
>>>>>    create mode 100644 drivers/leds/flash/leds-qcom-flash.c
>>>>>
>>>>> diff --git a/drivers/leds/flash/Kconfig
>>>>> b/drivers/leds/flash/Kconfig
>>>>> index d3eb689b193c..f36a60409290 100644
>>>>> --- a/drivers/leds/flash/Kconfig
>>>>> +++ b/drivers/leds/flash/Kconfig
>>>>> @@ -61,6 +61,21 @@ config LEDS_MT6360
>>>>>             Independent current sources supply for each flash
>>>>> LED >
>>>>> support torch
>>>>>             and strobe mode.
>>>>>    
>>>>> +config LEDS_QCOM_FLASH
>>>>> +       tristate "LED support for flash module inside Qualcomm
>>>>>>
>>>>> Technologies, Inc. PMIC"
>>>>> +       depends on MFD_SPMI_PMIC || COMPILE_TEST
>>>>> +       depends on LEDS_CLASS && OF
>>>>> +       depends on V4L2_FLASH_LED_CLASS ||
>>>>> !V4L2_FLASH_LED_CLASS
>>>>> +       select REGMAP
>>>>> +       help
>>>>> +         This option enables support for the flash module
>>>>> found in
>>>>>> Qualcomm
>>>>> +         Technologies, Inc. PMICs. The flash module can have 3
>>>>> or
>>>>> 4 > flash LED
>>>>> +         channels and each channel is programmable to support
>>>>> up
>>>>> to > 1.5 A full
>>>>> +         scale current. It also supports connecting two
>>>>> channels'
>>>>>> output together
>>>>> +         to supply one LED component to achieve current up to
>>>>> 2 A.
>>>>>> In such case,
>>>>> +         the total LED currentwill be split symmetrically on
>>>>> each
>>>>>> channel and
>>>>> +         they will be enabled/disabled at the same time.
>>>>> +
>>>>>    config LEDS_RT4505
>>>>>           tristate "LED support for RT4505 flashlight
>>>>> controller"
>>>>>           depends on I2C && OF
>>>>> diff --git a/drivers/leds/flash/Makefile >
>>>>> b/drivers/leds/flash/Makefile
>>>>> index 0acbddc0b91b..8a60993f1a25 100644
>>>>> --- a/drivers/leds/flash/Makefile
>>>>> +++ b/drivers/leds/flash/Makefile
>>>>> @@ -6,6 +6,7 @@ obj-$(CONFIG_LEDS_AS3645A)      += leds-
>>>>> as3645a.o
>>>>>    obj-$(CONFIG_LEDS_KTD2692)     += leds-ktd2692.o
>>>>>    obj-$(CONFIG_LEDS_LM3601X)     += leds-lm3601x.o
>>>>>    obj-$(CONFIG_LEDS_MAX77693)    += leds-max77693.o
>>>>> +obj-$(CONFIG_LEDS_QCOM_FLASH)  += leds-qcom-flash.o
>>>>>    obj-$(CONFIG_LEDS_RT4505)      += leds-rt4505.o
>>>>>    obj-$(CONFIG_LEDS_RT8515)      += leds-rt8515.o
>>>>>    obj-$(CONFIG_LEDS_SGM3140)     += leds-sgm3140.o
>>>>> diff --git a/drivers/leds/flash/leds-qcom-flash.c >
>>>>> b/drivers/leds/flash/leds-qcom-flash.c
>>>>> new file mode 100644
>>>>> index 000000000000..a9fcf61600c3
>>>>> --- /dev/null
>>>>> +++ b/drivers/leds/flash/leds-qcom-flash.c
>>>>> @@ -0,0 +1,700 @@
>>>>> +// SPDX-License-Identifier: GPL-2.0-only
>>>>> +/*
>>>>> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All
>>>>> rights
>>>>>> reserved.
>>>>> + */
>>>>> +
>>>>> +#include <linux/bitfield.h>
>>>>> +#include <linux/bits.h>
>>>>> +#include <linux/leds.h>
>>>>> +#include <linux/led-class-flash.h>
>>>>> +#include <linux/module.h>
>>>>> +#include <linux/platform_device.h>
>>>>> +#include <linux/property.h>
>>>>> +#include <linux/regmap.h>
>>>>> +#include <media/v4l2-flash-led-class.h>
>>>>> +
>>>>> +/* registers definitions */
>>>>> +#define FLASH_TYPE_REG                 0x04
>>>>> +#define FLASH_TYPE_VAL                 0x18
>>>>> +
>>>>> +#define FLASH_SUBTYPE_REG              0x05
>>>>> +#define FLASH_SUBTYPE_3CH_VAL          0x04
>>>
>>> PMI8998 has also a 3 channel flash subtype, but reports 0x03 as
>>> subtype. The driver won't probe because of this since the subtype
>>> did
>>> not match. Changing this value to 0x03 made this driver work on
>>> SDM845
>>> based device as well with PMI8998. Would you consider supporting
>>> SDM845+PMI8998 as well?
>>>
>> I just double checked, flash module in PMI8998 (with subtype 0x3) has
>> very similar register definition as the flash module in PM8150C (with
>> subtype 0x4) that the driver is intended to support, it's good know
>> that
>> it's 99% work.
>> I can add the 0x3 subtype support but the only problem is I couldn't
>> find a device with PMI8998 to test it out. Would it be good if I add
>> the
>> support and rely on your test result?
> 
> Sure! I already have a branch locally to test your patches, happy to
> help! I have an SDM845 device here with PMI8998 with 2 LEDs: cold and
> warm white.
> 
Thank you for the help!
>>
>>>>> +#define FLASH_SUBTYPE_4CH_VAL          0x07
>>>>> +
>>>>> +#define FLASH_TIMER_EN_BIT             BIT(7)
>>>>> +#define FLASH_TIMER_VAL_MASK           GENMASK(6, 0)
>>>>> +#define FLASH_TIMER_STEP_MS            10
>>>>> +
>>>>> +#define FLASH_STROBE_HW_SW_SEL_BIT     BIT(2)
>>>>> +#define SW_STROBE_VAL                  0
>>>>> +#define HW_STROBE_VAL                  1
>>>>> +#define FLASH_HW_STROBE_TRIGGER_SEL_BIT        BIT(1)
>>>>> +#define STROBE_LEVEL_TRIGGER_VAL       0
>>>>> +#define STROBE_EDGE_TRIGGER_VAL                1
>>>>> +#define FLASH_STROBE_POLARITY_BIT      BIT(0)
>>>>> +#define STROBE_ACTIVE_HIGH_VAL         1
>>>>> +
>>>>> +#define FLASH_IRES_MASK_4CH            BIT(0)
>>>>> +#define FLASH_IRES_MASK_3CH            GENMASK(1, 0)
>>>>> +#define FLASH_IRES_12P5MA_VAL          0
>>>>> +#define FLASH_IRES_5MA_VAL_4CH         1
>>>>> +#define FLASH_IRES_5MA_VAL_3CH         3
>>>>> +
>>>>> +/* constants */
>>>>> +#define FLASH_CURRENT_MAX_UA           1500000
>>>>> +#define TORCH_CURRENT_MAX_UA           500000
>>>>> +#define FLASH_TOTAL_CURRENT_MAX_UA     2000000
>>>>> +#define FLASH_CURRENT_DEFAULT_UA       1000000
>>>>> +#define TORCH_CURRENT_DEFAULT_UA       200000
>>>>> +
>>>>> +#define TORCH_IRES_UA                  5000
>>>>> +#define FLASH_IRES_UA                  12500
>>>>> +
>>>>> +#define FLASH_TIMEOUT_MAX_US           1280000
>>>>> +#define FLASH_TIMEOUT_STEP_US          10000
>>>>> +
>>>>> +enum hw_type {
>>>>> +       QCOM_MVFLASH_3CH,
>>>>> +       QCOM_MVFLASH_4CH,
>>>>> +};
>>>>> +
>>>>> +enum led_mode {
>>>>> +       FLASH_MODE,
>>>>> +       TORCH_MODE,
>>>>> +};
>>>>> +
>>>>> +enum led_strobe {
>>>>> +       SW_STROBE,
>>>>> +       HW_STROBE,
>>>>> +};
>>>>> +
>>>>> +enum {
>>>>> +       REG_STATUS1,
>>>>> +       REG_STATUS2,
>>>>> +       REG_STATUS3,
>>>>> +       REG_CHAN_TIMER,
>>>>> +       REG_ITARGET,
>>>>> +       REG_MODULE_EN,
>>>>> +       REG_IRESOLUTION,
>>>>> +       REG_CHAN_STROBE,
>>>>> +       REG_CHAN_EN,
>>>>> +       REG_MAX_COUNT,
>>>>> +};
>>>>> +
>>>>> +struct reg_field mvflash_3ch_regs[REG_MAX_COUNT] = {
>>>>> +       REG_FIELD(0x08, 0, 7),                  /*
>>>>> status1      */
>>>>> +       REG_FIELD(0x09, 0, 7),                  /*
>>>>> status2      */
>>>>> +       REG_FIELD(0x0a, 0, 7),                  /*
>>>>> status3      */
>>>>> +       REG_FIELD_ID(0x40, 0, 7, 3, 1),         /*
>>>>> chan_timer   */
>>>>> +       REG_FIELD_ID(0x43, 0, 6, 3, 1),         /*
>>>>> itarget      */
>>>>> +       REG_FIELD(0x46, 7, 7),                  /*
>>>>> module_en    */
>>>>> +       REG_FIELD(0x47, 0, 5),                  /*
>>>>> iresolution  */
>>>>> +       REG_FIELD_ID(0x49, 0, 2, 3, 1),         /*
>>>>> chan_strobe  */
>>>>> +       REG_FIELD(0x4c, 0, 2),                  /*
>>>>> chan_en      */
>>>>> +};
>>>
>>> These registers map perfectly for SDM845 with PMI8998 as well,
>>> adding
>>> support for this subtype (0x03) would be great.
>>>
>>>>> +
>>>>> +struct reg_field mvflash_4ch_regs[REG_MAX_COUNT] = {
>>>>> +       REG_FIELD(0x06, 0, 7),                  /*
>>>>> status1      */
>>>>> +       REG_FIELD(0x07, 0, 6),                  /*
>>>>> status2      */
>>>>> +       REG_FIELD(0x09, 0, 7),                  /*
>>>>> status3      */
>>>>> +       REG_FIELD_ID(0x3e, 0, 7, 4, 1),         /*
>>>>> chan_timer   */
>>>>> +       REG_FIELD_ID(0x42, 0, 6, 4, 1),         /*
>>>>> itarget      */
>>>>> +       REG_FIELD(0x46, 7, 7),                  /*
>>>>> module_en    */
>>>>> +       REG_FIELD(0x49, 0, 3),                  /*
>>>>> iresolution  */
>>>>> +       REG_FIELD_ID(0x4a, 0, 6, 4, 1),         /*
>>>>> chan_strobe  */
>>>>> +       REG_FIELD(0x4e, 0, 3),                  /*
>>>>> chan_en      */
>>>>> +};
>>>>> +
>>>>> +struct qcom_flash_led {
>>>>> +       struct qcom_flash_chip          *chip;
>>>>> +       struct led_classdev_flash       flash;
>>>>> +       struct v4l2_flash               *v4l2_flash;
>>>>> +       u32                             max_flash_current_ma;
>>>>> +       u32                             max_torch_current_ma;
>>>>> +       u32                             max_timeout_ms;
>>>>> +       u32                             flash_current_ma;
>>>>> +       u32                             flash_timeout_ms;
>>>>> +       u8                              *chan_id;
>>>>> +       u8                              chan_count;
>>>>> +       bool                            enabled;
>>>>> +};
>>>>> +
>>>>> +struct qcom_flash_chip {
>>>>> +       struct qcom_flash_led   *leds;
>>>>> +       struct regmap_field     *r_fields[REG_MAX_COUNT];
>>>>> +       struct device           *dev;
>>>>> +       struct mutex            lock;
>>>>> +       enum hw_type            hw_type;
>>>>> +       u8                      leds_count;
>>>>> +       u8                      max_channels;
>>>>> +       u8                      chan_en_bits;
>>>>> +};
>>>>> +
>>>>> +static int set_flash_module_en(struct qcom_flash_led *led,
>>>>> bool
>>>>> en)
>>>>> +{
>>>>> +       struct qcom_flash_chip *chip= led->chip;
>>>>> +       u8 led_mask = 0, val;
>>>>> +       int i, rc;
>>>>> +
>>>>> +       for (i = 0; i < led->chan_count; i++)
>>>>> +               led_mask |= BIT(led->chan_id[i] - 1);
>>>>> +
>>>>> +       mutex_lock(&chip->lock);
>>>>> +       if (en)
>>>>> +               chip->chan_en_bits |= led_mask;
>>>>> +       else
>>>>> +               chip->chan_en_bits &= ~led_mask;
>>>>> +
>>>>> +       val = !!chip->chan_en_bits;
>>>>> +       rc = regmap_field_write(chip->r_fields[REG_MODULE_EN],
>>>>> val);
>>>>> +       if (rc < 0)
>>>>> +               dev_err(chip->dev, "write module_en failed,
>>>>> rc=%d\n", > rc);
>>>>> +       mutex_unlock(&chip->lock);
>>>>> +
>>>>> +       return rc;
>>>>> +}
>>>>> +
>>>>> +static int set_flash_current(struct qcom_flash_led *led, u32 >
>>>>> current_ma, enum led_mode mode)
>>>>> +{
>>>>> +       struct qcom_flash_chip *chip= led->chip;
>>>>> +       u32 itarg_ua = current_ma * 1000 / led->chan_count + 1;
>>>>> +       u32 ires_ua = (mode ==FLASH_MODE) ? FLASH_IRES_UA : >
>>>>> TORCH_IRES_UA;
>>>>> +       u8 val, shift, ires_mask =0, ires_val = 0, chan_id;
>>>>> +       int i, rc;
>>>>> +
>>>>> +       /*
>>>>> +        * Split the current across the channels and set the
>>>>> +        * IRESOLUTION and ITARGET registers accordingly.
>>>>> +        */
>>>>> +       for (i = 0; i < led->chan_count; i++) {
>>>>> +               chan_id = led->chan_id[i];
>>>>> +               if (itarg_ua < ires_ua)
>>>>> +                       val = 0;
>>>>> +               else
>>>>> +                       val = itarg_ua / ires_ua - 1;
>>>>> +
>>>>> +               rc = regmap_fields_write(chip-
>>>>>> r_fields[REG_ITARGET], > chan_id - 1, val);
>>>>> +               if (rc < 0)
>>>>> +                       returnrc;
>>>>> +
>>>>> +               if (chip->hw_type == QCOM_MVFLASH_3CH) {
>>>>> +                       shift = (chan_id - 1) * 2;
>>>>> +                       ires_mask |= FLASH_IRES_MASK_3CH <<
>>>>> shift;
>>>>> +                       ires_val |= ((mode == FLASH_MODE) ?
>>>>> +                               (FLASH_IRES_12P5MA_VAL <<
>>>>> shift) :
>>>>> +                               (FLASH_IRES_5MA_VAL_3CH <<
>>>>> shift));
>>>>> +               } else if (chip->hw_type == QCOM_MVFLASH_4CH) {
>>>>> +                       shift = chan_id - 1;
>>>>> +                       ires_mask |= FLASH_IRES_MASK_4CH <<
>>>>> shift;
>>>>> +                       ires_val |= ((mode == FLASH_MODE) ?
>>>>> +                               (FLASH_IRES_12P5MA_VAL <<
>>>>> shift) :
>>>>> +                               (FLASH_IRES_5MA_VAL_4CH <<
>>>>> shift));
>>>>> +               }
>>>>> +       }
>>>>> +
>>>>> +       return > regmap_field_update_bits(chip-
>>>>>> r_fields[REG_IRESOLUTION], ires_mask, > ires_val);
>>>>> +}
>>>>> +
>>>>> +static int set_flash_timeout(struct qcom_flash_led *led, u32 >
>>>>> timeout_ms)
>>>>> +{
>>>>> +       struct qcom_flash_chip *chip= led->chip;
>>>>> +       u8 val, chan_id;
>>>>> +       int rc, i;
>>>>> +
>>>>> +       /* set SAFETY_TIMER for all the channels connected to
>>>>> the >
>>>>> same LED */
>>>>> +       timeout_ms = min_t(u32, timeout_ms, led-
>>>>>> max_timeout_ms);
>>>>> +       for (i = 0; i < led->chan_count; i++) {
>>>>> +               chan_id = led->chan_id[i];
>>>>> +               val = timeout_ms / FLASH_TIMER_STEP_MS;
>>>>> +               val = clamp_t(u8, val, 0,
>>>>> FLASH_TIMER_VAL_MASK);
>>>>> +               if (timeout_ms)
>>>>> +                       val |= FLASH_TIMER_EN_BIT;
>>>>> +
>>>>> +               rc = > regmap_fields_write(chip-
>>>>>> r_fields[REG_CHAN_TIMER], chan_id - 1, > val);
>>>>> +               if (rc < 0)
>>>>> +                       returnrc;
>>>>> +       }
>>>>> +
>>>>> +       return 0;
>>>>> +}
>>>>> +
>>>>> +static int set_flash_strobe(struct qcom_flash_led *led, enum >
>>>>> led_strobe strobe, bool state)
>>>>> +{
>>>>> +       struct qcom_flash_chip *chip= led->chip;
>>>>> +       u8 mask, val, chan_id = 0,chan_mask = 0;
>>>>> +       int rc, i;
>>>>> +
>>>>> +       /* Set SW strobe config for all channels connected to
>>>>> the
>>>>> LED > */
>>>>> +       for (i = 0; i < led->chan_count; i++) {
>>>>> +               chan_id = led->chan_id[i];
>>>>> +               if (strobe == SW_STROBE)
>>>>> +                       val =
>>>>> FIELD_PREP(FLASH_STROBE_HW_SW_SEL_BIT, > SW_STROBE_VAL);
>>>>> +               else
>>>>> +                       val =
>>>>> FIELD_PREP(FLASH_STROBE_HW_SW_SEL_BIT, > HW_STROBE_VAL);
>>>>> +
>>>>> +               val |=
>>>>> FIELD_PREP(FLASH_HW_STROBE_TRIGGER_SEL_BIT,
>>>>>> STROBE_LEVEL_TRIGGER_VAL) |
>>>>> +                       FIELD_PREP(FLASH_STROBE_POLARITY_BIT, >
>>>>> STROBE_ACTIVE_HIGH_VAL);
>>>>> +               rc = > regmap_fields_write(chip-
>>>>>> r_fields[REG_CHAN_STROBE], chan_id - 1, > val);
>>>>> +               if (rc < 0)
>>>>> +                       returnrc;
>>>>> +
>>>>> +               chan_mask |= BIT(chan_id - 1);
>>>>> +       }
>>>>> +
>>>>> +       /* enable/disable flash channels */
>>>>> +       mask = chan_mask;
>>>>> +       val = state ? mask : 0;
>>>>> +       rc = regmap_field_update_bits(chip-
>>>>>> r_fields[REG_CHAN_EN],
>>>>>> mask, val);
>>>>> +       if (rc < 0)
>>>>> +               return rc;
>>>>> +
>>>>> +       led->enabled = state;
>>>>> +       return 0;
>>>>> +}
>>>>> +
>>>>> +static int qcom_flash_brightness_set(struct led_classdev_flash
>>>>>>
>>>>> *fled_cdev, u32 brightness)
>>>>> +{
>>>>> +       struct qcom_flash_led *led = container_of(fled_cdev,
>>>>> struct
>>>>>> qcom_flash_led, flash);
>>>>> +
>>>>> +       led->flash_current_ma = min_t(u32, led-
>>>>>> max_flash_current_ma, > brightness / 1000);
>>>>> +       return 0;
>>>>> +}
>>>
>>> This doesn't seem to work in torch mode for me on PMI8998. If the
>>> brightness is 0, the torch is OFF as expected, but when the torch
>>> is
>>> ON, you cannot control the brightness. The brightness is the same
>>> for
>>> [1, 255]. If the hardware cannot change the brightness in torch
>>> mode,
>>> it would be nice to report a max_brightness value of 1 instead of
>>> 255
>>> for userspace. This could be a limitation of the PMI8998, not sure.
>>> Do you have any insights here? This driver is already 99% working
>>> for
>>> SDM845+PMI8998.
>>>
>>> Flash mode works great, timeout & brightness can be configured just
>>> fine.
>>>
>>
>> Here, function qcom_flash_brightness_set() is used for setting
>> brightness in flash mode and it was supposed to be working with
>> following commands combination:
>>          echo xxx > flash_brightness
>>          echo 1 > flash_strobe  (you will need to toggle flash_strobe
>> when you
>> enabling it again)
>>
>> Can you check if you can see the brightness change in flash mode when
>> you updating the flash_brightness value with these commands?
>>
>> You can echo any value between [0, max_flash_brightness] into the
>> flash_brightness, there is a "max_flash_brightness" sysfs node and
>> the
>> value comes from DT property "flash-max-microamp", ex. my dtsi node
>> has
>> "flash-max-microamp = <2000000>;" defined so I am having following
>> value
>> for max_flash_brightness:
>>
>> kalama:/sys/class/leds/white:flash-0 # cat max_flash_brightness
>> 2000000
>>
>> And by default flash mode uses 12500uA resolution so you won't see
>> brightness change when you update it with values between [1, 12500].
> 
> Yes, this works perfectly fine on PMI8998. I can adjust the flash
> brightness and flash timeout perfectly.
> 
>>
>> If you want to update the brightness for torch node, you can directly
>> update the "brightness" node with values between [0, 255], and it's
>> mapping to the torch current between [0, led-max-microamp].
>> "led-max-microamp" is also has value coming from the DT property.
>>
>> This worked at my side on both pm8150C and pm8550.I think it should
>> work
>> on PMI8998 as well because the flash module in it is very similar to
>> the
>> one in PM8150c. Let me know if you still see such issues at your
>> side.
>> Thanks
> 
> Only here I have an issue with PMI8998: the "brightness" nodes should
> change the brightness of the torch, but it doesn't make a difference
> here. When I do:
> 
> - echo 0 > brightness --> LED turns OFF
> - echo 255 > brightness --> LED turns ON
> - echo 100 > brightness --> LED is still ON, but brightness is the same
> as with 255.
> 
> Could it be that PMI8998 is slightly different here than with PM8150c
> for example? Maybe it doesn't support brightness for torch?
> 
> Here's my DTS:
> 
> *PMI8998*
> 
> pmi8998_flash: led-controller@d300 {
> 	compatible = "qcom,pm6150l-flash-led", "qcom,spmi-flash-led";
> 	reg = <0xd300>;
> 	status = "disabled";
> };
> 
> *SDM845 SHIFT axolotl*
> 
> &pmi8998_flash {
> 	status = "okay";
> 
> 	led-0 {
> 		function = LED_FUNCTION_FLASH;
> 		color = <LED_COLOR_ID_WHITE>;
> 		led-sources = <1>;
> 		led-max-microamp = <180000>;
> 		flash-max-microamp = <1000000>;
> 		flash-max-timeout-us = <1280000>;
> 	};
> 
> 	led-1 {
> 		function = LED_FUNCTION_FLASH;
> 		color = <LED_COLOR_ID_YELLOW>;
> 		led-sources = <2>;
> 		led-max-microamp = <180000>;
> 		flash-max-microamp = <1000000>;
> 		flash-max-timeout-us = <1280000>;
> 	};
> };
> 
Thank you for getting back all the details. The devicetree node looks 
good to me.

I checked again and confirmed that the flash modules in PMI8998 and 
PM8150C have the same register definition for ITARGETx (0xD343 + x) and 
IRESOLUTION (0xD347), these are the only 2 settings would impact LED 
brightness, and in torch mode, IRESOLUTION is fixed to 5mA and only 
ITARGET is updated accordingly.

I updated my workspace to use the same current for torch mode as your 
settings in devicetree and tried again on my PM8150C device,I could 
notice the brightness change when echoing different values to the 
brightness sysfs node, however, when I updating values between 255 and 
200, it wasn't a very noticeable brightness change with naked eys, but I 
could see the ITRAGETx register changed accordingly when reading its 
value back from the regmap debugfs node.

Can you try the same and see if the register got updated accordingly 
when you updating brightness values? If yes, I would wonder if the LED 
component on your device has upper current limit in torch mode close to 
(100 / 255 ) * 180mA so you that you can't observe the brightness change 
when updating between 100 to 255. Another easier thing to try, can you 
echo a lower brightness value, such as 10, to see if you can notice the 
brightness change?

> 
>>
>>>>> +
>>>>> +static int qcom_flash_timeout_set(struct led_classdev_flash >
>>>>> *fled_cdev, u32 timeout)
>>>>> +{
>>>>> +       struct qcom_flash_led *led = container_of(fled_cdev,
>>>>> struct
>>>>>> qcom_flash_led, flash);
>>>>> +
>>>>> +       led->flash_timeout_ms = timeout / 1000;
>>>>> +       return 0;
>>>>> +}
>>>>> +
>>>>> +static int qcom_flash_strobe_set(struct led_classdev_flash >
>>>>> *fled_cdev, bool state)
>>>>> +{
>>>>> +       struct qcom_flash_led *led = container_of(fled_cdev,
>>>>> struct
>>>>>> qcom_flash_led, flash);
>>>>> +       int rc;
>>>>> +
>>>>> +       rc = set_flash_current(led, led->flash_current_ma, >
>>>>> FLASH_MODE);
>>>>> +       if (rc < 0)
>>>>> +               return rc;
>>>>> +
>>>>> +       rc = set_flash_timeout(led, led->flash_timeout_ms);
>>>>> +       if (rc < 0)
>>>>> +               return rc;
>>>>> +
>>>>> +       rc = set_flash_module_en(led, state);
>>>>> +       if (rc < 0)
>>>>> +               return rc;
>>>>> +
>>>>> +       return set_flash_strobe(led,SW_STROBE, state);
>>>>> +}
>>>>> +
>>>>> +static int qcom_flash_strobe_get(struct led_classdev_flash >
>>>>> *fled_cdev, bool *state)
>>>>> +{
>>>>> +       struct qcom_flash_led *led = container_of(fled_cdev,
>>>>> struct
>>>>>> qcom_flash_led, flash);
>>>>> +
>>>>> +       *state = led->enabled;
>>>>> +       return 0;
>>>>> +}
>>>>> +
>>>>> +static int qcom_flash_fault_get(struct led_classdev_flash >
>>>>> *fled_cdev, u32 *fault)
>>>>> +{
>>>>> +       struct qcom_flash_led *led = container_of(fled_cdev,
>>>>> struct
>>>>>> qcom_flash_led, flash);
>>>>> +       struct qcom_flash_chip *chip= led->chip;
>>>>> +       u8 shift, chan_id = 0, chan_mask = 0;
>>>>> +       u8 ot_mask = 0, oc_mask = 0, uv_mask = 0;
>>>>> +       u32 val, fault_sts = 0;
>>>>> +       int i, rc;
>>>>> +
>>>>> +       rc = regmap_field_read(chip->r_fields[REG_STATUS1],
>>>>> &val);
>>>>> +       if (rc < 0)
>>>>> +               return rc;
>>>>> +
>>>>> +       for (i = 0; i < led->chan_count; i++) {
>>>>> +               chan_id = led->chan_id[i];
>>>>> +               shift = (chan_id - 1) * 2;
>>>>> +               if (val & BIT(shift))
>>>>> +                       fault_sts |= LED_FAULT_SHORT_CIRCUIT;
>>>>> +               chan_mask |= BIT(chan_id - 1);
>>>>> +       }
>>>>> +
>>>>> +       rc = regmap_field_read(chip->r_fields[REG_STATUS2],
>>>>> &val);
>>>>> +       if (rc < 0)
>>>>> +               return rc;
>>>>> +
>>>>> +       if (chip->hw_type == QCOM_MVFLASH_3CH) {
>>>>> +               ot_mask = 0x0f;
>>>>> +               oc_mask = 0xe0;
>>>>> +               uv_mask = 0x10;
>>>>> +       } else if (chip->hw_type == QCOM_MVFLASH_4CH) {
>>>>> +               ot_mask = 0x70;
>>>>> +               oc_mask = 0x0e;
>>>>> +               uv_mask = 0x01;
>>>>> +       }
>>>>> +
>>>>> +       if (val & ot_mask)
>>>>> +               fault_sts |= LED_FAULT_OVER_TEMPERATURE;
>>>>> +       if (val & oc_mask)
>>>>> +               fault_sts |= LED_FAULT_OVER_CURRENT;
>>>>> +       if (val & uv_mask)
>>>>> +               fault_sts |= LED_FAULT_INPUT_VOLTAGE;
>>>>> +
>>>>> +       rc = regmap_field_read(chip->r_fields[REG_STATUS3],
>>>>> &val);
>>>>> +       if (rc < 0)
>>>>> +               return rc;
>>>>> +
>>>>> +       if (chip->hw_type == QCOM_MVFLASH_3CH) {
>>>>> +               if (val & chan_mask)
>>>>> +                       fault_sts |= LED_FAULT_TIMEOUT;
>>>>> +       } else if (chip->hw_type == QCOM_MVFLASH_4CH) {
>>>>> +               for (i = 0; i < led->chan_count; i++) {
>>>>> +                       chan_id = led->chan_id[i];
>>>>> +                       shift = (chan_id - 1) * 2;
>>>>> +                       if (val & BIT(shift))
>>>>> +                               fault_sts |= LED_FAULT_TIMEOUT;
>>>>> +               }
>>>>> +       }
>>>>> +
>>>>> +       *fault = fault_sts;
>>>>> +       return 0;
>>>>> +}
>>>>> +
>>>>> +static int qcom_flash_led_brightness_set(struct led_classdev >
>>>>> *led_cdev,
>>>>> +                                       enum led_brightness >
>>>>> brightness)
>>>>> +{
>>>>> +       struct led_classdev_flash *fled_cdev =
>>>>> +               container_of(led_cdev, struct
>>>>> led_classdev_flash, >
>>>>> led_cdev);
>>>>> +       struct qcom_flash_led *led =
>>>>> +               container_of(fled_cdev, struct qcom_flash_led,
>>>>>>
>>>>> flash);
>>>>> +       u32 current_ma = brightness * led->max_torch_current_ma
>>>>> / >
>>>>> LED_FULL;
>>>>> +       bool enable = !!brightness;
>>>>> +       int rc;
>>>>> +
>>>>> +       rc = set_flash_current(led, current_ma, TORCH_MODE);
>>>>> +       if (rc < 0)
>>>>> +               return rc;
>>>>> +
>>>>> +       /* disable flash timeout fortorch LED */
>>>>> +       rc = set_flash_timeout(led, 0);
>>>>> +       if (rc < 0)
>>>>> +               return rc;
>>>>> +
>>>>> +       rc = set_flash_module_en(led, enable);
>>>>> +       if (rc < 0)
>>>>> +               return rc;
>>>>> +
>>>>> +       return set_flash_strobe(led,SW_STROBE, enable);
>>>>> +}
>>>>> +
>>>>> +static const struct led_flash_ops qcom_flash_ops = {
>>>>> +       .flash_brightness_set = qcom_flash_brightness_set,
>>>>> +       .strobe_set = qcom_flash_strobe_set,
>>>>> +       .strobe_get = qcom_flash_strobe_get,
>>>>> +       .timeout_set = qcom_flash_timeout_set,
>>>>> +       .fault_get = qcom_flash_fault_get,
>>>>> +};
>>>>> +
>>>>> +#if IS_ENABLED(CONFIG_V4L2_FLASH_LED_CLASS)
>>>>> +static int qcom_flash_external_strobe_set(struct v4l2_flash >
>>>>> *v4l2_flash, bool enable)
>>>>> +{
>>>>> +       struct led_classdev_flash *flash = v4l2_flash-
>>>>>> fled_cdev;
>>>>> +       struct qcom_flash_led *led = container_of(flash, struct
>>>>>>
>>>>> qcom_flash_led, flash);
>>>>> +       int rc;
>>>>> +
>>>>> +       rc = set_flash_module_en(led, enable);
>>>>> +       if (rc < 0)
>>>>> +               return rc;
>>>>> +
>>>>> +       if (enable)
>>>>> +               return set_flash_strobe(led, HW_STROBE, true);
>>>>> +       else
>>>>> +               return set_flash_strobe(led, SW_STROBE, false);
>>>>> +}
>>>>> +
>>>>> +static enum led_brightness
>>>>> qcom_flash_intensity_to_led_brightness(
>>>>> +               struct v4l2_flash *v4l2_flash, s32 intensity)
>>>>> +{
>>>>> +       struct led_classdev_flash *flash = v4l2_flash-
>>>>>> fled_cdev;
>>>>> +       struct qcom_flash_led *led = container_of(flash, struct
>>>>>>
>>>>> qcom_flash_led, flash);
>>>>> +       u32 current_ma = intensity/ 1000;
>>>>> +
>>>>> +       current_ma = min_t(u32, current_ma, > led-
>>>>>> max_torch_current_ma);
>>>>> +       if (!current_ma)
>>>>> +               return LED_OFF;
>>>>> +
>>>>> +       return current_ma * LED_FULL/ led-
>>>>>> max_torch_current_ma;
>>>>> +}
>>>>> +
>>>>> +static s32 qcom_flash_brightness_to_led_intensity(struct
>>>>> v4l2_flash > *v4l2_flash,
>>>>> +                                       enum led_brightness >
>>>>> brightness)
>>>>> +{
>>>>> +       struct led_classdev_flash *flash = v4l2_flash-
>>>>>> fled_cdev;
>>>>> +       struct qcom_flash_led *led = container_of(flash, struct
>>>>>>
>>>>> qcom_flash_led, flash);
>>>>> +
>>>>> +       return (brightness * led->max_torch_current_ma * 1000)
>>>>> / >
>>>>> LED_FULL;
>>>>> +}
>>>>> +
>>>>> +static const struct v4l2_flash_ops qcom_v4l2_flash_ops = {
>>>>> +       .external_strobe_set = qcom_flash_external_strobe_set,
>>>>> +       .intensity_to_led_brightness= >
>>>>> qcom_flash_intensity_to_led_brightness,
>>>>> +       .led_brightness_to_intensity= >
>>>>> qcom_flash_brightness_to_led_intensity,
>>>>> +};
>>>>> +
>>>>> +static int qcom_flash_v4l2_init(struct qcom_flash_led *led,
>>>>> struct
>>>>>> fwnode_handle *fwnode)
>>>>> +{
>>>>> +       struct v4l2_flash_config v4l2_cfg = {0};
>>>>> +       struct led_flash_setting *s = &v4l2_cfg.intensity;
>>>>> +
>>>>> +       if (!(led->flash.led_cdev.flags & LED_DEV_CAP_FLASH))
>>>>> +               return 0;
>>>>> +
>>>>> +       s->min = s->step = TORCH_IRES_UA * led->chan_count;
>>>>> +       s->max = led->max_torch_current_ma * 1000;
>>>>> +       s->val = min_t(u32, s->max, TORCH_CURRENT_DEFAULT_UA);
>>>>> +
>>>>> +       strscpy(v4l2_cfg.dev_name, >led->flash.led_cdev.dev-
>>>>>> kobj.name,
>>>>> +                                       sizeof(v4l2_cfg.dev_nam
>>>>> e));
>>>>> +       v4l2_cfg.has_external_strobe= 1;
>>>>> +       v4l2_cfg.flash_faults = LED_FAULT_INPUT_VOLTAGE | >
>>>>> LED_FAULT_OVER_CURRENT |
>>>>> +               LED_FAULT_SHORT_CIRCUIT |
>>>>> LED_FAULT_OVER_TEMPERATURE > | LED_FAULT_TIMEOUT;
>>>>> +
>>>>> +       led->v4l2_flash = v4l2_flash_init(led->chip->dev,
>>>>> fwnode, >
>>>>> &led->flash,
>>>>> +                                       &qcom_v4l2_flash_ops, >
>>>>> &v4l2_cfg);
>>>>> +       return PTR_ERR_OR_ZERO(led->v4l2_flash);
>>>>> +}
>>>>> +# else
>>>>> +static int qcom_flash_v4l2_init(struct qcom_flash_led *led,
>>>>> struct
>>>>>> fwnode_handle *fwnode)
>>>>> +{
>>>>> +       return 0;
>>>>> +}
>>>>> +#endif
>>>>> +
>>>>> +static int qcom_flash_register_led_device(struct device
>>>>> *parent,
>>>>> +               struct fwnode_handle *node, struct
>>>>> qcom_flash_led >
>>>>> *led)
>>>>> +{
>>>>> +       struct qcom_flash_chip *chip= led->chip;
>>>>> +       struct led_init_data init_data;
>>>>> +       struct led_classdev_flash *flash;
>>>>> +       struct led_flash_setting *s;
>>>>> +       u32 count, val;
>>>>> +       u32 channels[4];
>>>>> +       int i, rc;
>>>>> +
>>>>> +       flash = &led->flash;
>>>>> +       count = fwnode_property_count_u32(node, "led-sources");
>>>>> +       if (count <= 0) {
>>>>> +               dev_err(chip->dev, "No led-sources
>>>>> specified\n");
>>>>> +               return -ENODEV;
>>>>> +       }
>>>>> +
>>>>> +       if (count > chip->max_channels) {
>>>>> +               dev_err(chip->dev, "led-sources count %u
>>>>> exceeds >
>>>>> maximum channel count %u\n",
>>>>> +                               count, chip->max_channels);
>>>>> +               return -EINVAL;
>>>>> +       }
>>>>> +
>>>>> +       rc = fwnode_property_read_u32_array(node, "led-
>>>>> sources", >
>>>>> channels, count);
>>>>> +       if (rc < 0) {
>>>>> +               dev_err(chip->dev, "get led-sources failed,
>>>>> rc=%d\n", > rc);
>>>>> +               return rc;
>>>>> +       }
>>>>> +
>>>>> +       led->chan_count = count;
>>>>> +       led->chan_id = devm_kcalloc(chip->dev, count,
>>>>> sizeof(u8), >
>>>>> GFP_KERNEL);
>>>>> +       if (!led->chan_id)
>>>>> +               return -ENOMEM;
>>>>> +
>>>>> +       for (i = 0; i < count; i++) {
>>>>> +               if (channels[i] > chip->max_channels) {
>>>>> +                       dev_err(chip->dev, "led-source out of
>>>>> HW >
>>>>> support range [1-%u]\n",
>>>>> +                                       chip->max_channels);
>>>>> +                       return-EINVAL;
>>>>> +               }
>>>>> +
>>>>> +               led->chan_id[i] = channels[i];
>>>>> +       }
>>>>> +
>>>>> +       rc = fwnode_property_read_u32(node, "led-max-microamp",
>>>>>>
>>>>> &val);
>>>>> +       if (rc < 0) {
>>>>> +               dev_err(chip->dev, "Get led-max-microamp
>>>>> failed, >
>>>>> rc=%d\n", rc);
>>>>> +               return rc;
>>>>> +       }
>>>>> +
>>>>> +       if (!val) {
>>>>> +               dev_err(chip->dev, "led-max-microamp shouldn't
>>>>> be >
>>>>> 0\n");
>>>>> +               return -EINVAL;
>>>>> +       }
>>>>> +
>>>>> +       val = min_t(u32, val, TORCH_CURRENT_MAX_UA * > led-
>>>>>> chan_count);
>>>>> +       led->max_torch_current_ma = val / 1000;
>>>>> +
>>>>> +       if (fwnode_property_present(node, "flash-max-
>>>>> microamp")) {
>>>>> +               flash->led_cdev.flags |= LED_DEV_CAP_FLASH;
>>>>> +               rc = fwnode_property_read_u32(node, > "flash-
>>>>> max-
>>>>> microamp", &val);
>>>>> +               if (rc < 0) {
>>>>> +                       dev_err(chip->dev, "Get flash-max-
>>>>> microamp
>>>>>> failed, rc=%d\n", rc);
>>>>> +                       returnrc;
>>>>> +               }
>>>>> +
>>>>> +               val = min_t(u32, val, FLASH_CURRENT_MAX_UA * >
>>>>> led-
>>>>>> chan_count);
>>>>> +               val = min_t(u32, val,
>>>>> FLASH_TOTAL_CURRENT_MAX_UA);
>>>>> +               s = &flash->brightness;
>>>>> +               s->min = s->step = FLASH_IRES_UA * led-
>>>>>> chan_count;
>>>>> +               s->max = val;
>>>>> +               s->val = min_t(u32, val,
>>>>> FLASH_CURRENT_DEFAULT_UA);
>>>>> +               led->max_flash_current_ma = val / 1000;
>>>>> +               led->flash_current_ma = s->val / 1000;
>>>>> +
>>>>> +               rc = fwnode_property_read_u32(node, > "flash-
>>>>> max-
>>>>> timeout-us", &val);
>>>>> +               if (rc < 0) {
>>>>> +                       dev_err(chip->dev, "Get flash-max-
>>>>> timeout-
>>>>> us > failed, rc=%d\n", rc);
>>>>> +                       returnrc;
>>>>> +               }
>>>>> +
>>>>> +               val = min_t(u32, val, FLASH_TIMEOUT_MAX_US);
>>>>> +               s = &flash->timeout;
>>>>> +               s->min = s->step = FLASH_TIMEOUT_STEP_US;
>>>>> +               s->val = s->max = val;
>>>>> +               led->max_timeout_ms = led->flash_timeout_ms =
>>>>> val /
>>>>>> 1000;
>>>>> +
>>>>> +               flash->ops = &qcom_flash_ops;
>>>>> +       }
>>>>> +
>>>>> +       flash->led_cdev.brightness_set_blocking = >
>>>>> qcom_flash_led_brightness_set;
>>>>> +       init_data.fwnode = node;
>>>>> +       init_data.devicename = NULL;
>>>>> +       init_data.default_label = NULL;
>>>>> +       init_data.devname_mandatory = false;
>>>>> +       rc = devm_led_classdev_flash_register_ext(parent,
>>>>> flash, >
>>>>> &init_data);
>>>>> +       if (rc < 0) {
>>>>> +               dev_err(chip->dev, "Register flash LED classdev
>>>>>>
>>>>> failed, rc=%d\n", rc);
>>>>> +               return rc;
>>>>> +       }
>>>>> +
>>>>> +       return qcom_flash_v4l2_init(led, node);
>>>>> +}
>>>>> +
>>>>> +static int qcom_flash_led_probe(struct platform_device *pdev)
>>>>> +{
>>>>> +       struct qcom_flash_chip *chip;
>>>>> +       struct qcom_flash_led *led;
>>>>> +       struct fwnode_handle *child;
>>>>> +       struct device *dev = &pdev->dev;
>>>>> +       struct regmap *map;
>>>>> +       struct reg_field *regs;
>>>>> +       int count, i, rc;
>>>>> +       u32 val, reg_base;
>>>>> +
>>>>> +       chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL);
>>>>> +       if (!chip)
>>>>> +               return -ENOMEM;
>>>>> +
>>>>> +       map = dev_get_regmap(dev->parent, NULL);
>>>>> +       if (!map) {
>>>>> +               dev_err(dev, "Failed to get parent regmap\n");
>>>>> +               return -EINVAL;
>>>>> +       }
>>>>> +
>>>>> +       rc = fwnode_property_read_u32(dev->fwnode, "reg",
>>>>> &reg_base);
>>>>> +       if (rc < 0) {
>>>>> +               dev_err(dev, "Failed to get register base
>>>>> address,
>>>>>> rc=%d\n", rc);
>>>>> +               return rc;
>>>>> +       }
>>>>> +
>>>>> +       rc = regmap_read(map, reg_base + FLASH_TYPE_REG, &val);
>>>>> +       if (rc < 0) {
>>>>> +               dev_err(dev, "Read flash module type failed, >
>>>>> rc=%d\n", rc);
>>>>> +               return rc;
>>>>> +       }
>>>>> +
>>>>> +       if (val != FLASH_TYPE_VAL){
>>>>> +               dev_err(dev, "type %#x is not a flash
>>>>> module\n", >
>>>>> val);
>>>>> +               return -ENODEV;
>>>>> +       }
>>>>> +
>>>>> +       rc = regmap_read(map, reg_base + FLASH_SUBTYPE_REG,
>>>>> &val);
>>>>> +       if (rc < 0) {
>>>>> +               dev_err(dev, "Read flash module subtype failed,
>>>>>>
>>>>> rc=%d\n", rc);
>>>>> +               return rc;
>>>>> +       }
>>>>> +
>>>>> +       if (val == FLASH_SUBTYPE_3CH_VAL) {
>>>>> +               chip->hw_type = QCOM_MVFLASH_3CH;
>>>>> +               chip->max_channels = 3;
>>>>> +               regs = mvflash_3ch_regs;
>>>>> +       } else if (val == FLASH_SUBTYPE_4CH_VAL) {
>>>>> +               chip->hw_type = QCOM_MVFLASH_4CH;
>>>>> +               chip->max_channels = 4;
>>>>> +               regs = mvflash_4ch_regs;
>>>>> +       } else {
>>>>> +               dev_err(dev, "flash subtype %#x is not yet >
>>>>> supported\n", val);
>>>>> +               return -ENODEV;
>>>>> +       }
>>>>> +
>>>>> +       for (i = 0; i < REG_MAX_COUNT; i++)
>>>>> +               regs[i].reg += reg_base;
>>>>> +
>>>>> +       rc = devm_regmap_field_bulk_alloc(dev, map, chip-
>>>>>> r_fields,
>>>>>> regs, REG_MAX_COUNT);
>>>>> +       if (rc < 0) {
>>>>> +               dev_err(dev, "failed to alloc regmap filed,
>>>>> rc=%d\n", > rc);
>>>>> +               return rc;
>>>>> +       }
>>>>> +
>>>>> +       chip->dev = dev;
>>>>> +       platform_set_drvdata(pdev, chip);
>>>>> +       mutex_init(&chip->lock);
>>>>> +       count = device_get_child_node_count(dev);
>>>>> +       if (count == 0 || count > chip->max_channels) {
>>>>> +               dev_err(dev, "No child or child count exceeds
>>>>> %d\n", > chip->max_channels);
>>>>> +               return -EINVAL;
>>>>> +       }
>>>>> +
>>>>> +       chip->leds = devm_kcalloc(dev, count, sizeof(*chip-
>>>>>> leds),
>>>>>> GFP_KERNEL);
>>>>> +       if (!chip->leds)
>>>>> +               return -ENOMEM;
>>>>> +
>>>>> +       device_for_each_child_node(dev, child) {
>>>>> +               led = &chip->leds[chip->leds_count];
>>>>> +               led->chip = chip;
>>>>> +               rc = qcom_flash_register_led_device(dev, child,
>>>>> led);
>>>>> +               if (rc < 0)
>>>>> +                       goto release;
>>>>> +
>>>>> +               chip->leds_count++;
>>>>> +       }
>>>>> +
>>>>> +       return 0;
>>>>> +release:
>>>>> +       while (chip->leds && chip->leds_count--)
>>>>> +               v4l2_flash_release(chip->leds[chip-
>>>>>> leds_count].v4l2_> flash);
>>>>> +       return rc;
>>>>> +}
>>>>> +
>>>>> +static int qcom_flash_led_remove(struct platform_device *pdev)
>>>>> +{
>>>>> +       struct qcom_flash_chip *chip=
>>>>> platform_get_drvdata(pdev);
>>>>> +
>>>>> +       while (chip->leds_count--)
>>>>> +               v4l2_flash_release(chip->leds[chip-
>>>>>> leds_count].v4l2_> flash);
>>>>> +
>>>>> +       mutex_destroy(&chip->lock);
>>>>> +       return 0;
>>>>> +}
>>>>> +
>>>>> +static const struct of_device_id qcom_flash_led_match_table[]
>>>>> = {
>>>>> +       { .compatible = "qcom,spmi-flash-led" },
>>>>> +       { }
>>>>> +};
>>>>> +
>>>>> +static struct platform_driver qcom_flash_led_driver = {
>>>>> +       .driver = {
>>>>> +               .name = "leds-qcom-flash",
>>>>> +               .of_match_table = qcom_flash_led_match_table,
>>>>> +       },
>>>>> +       .probe = qcom_flash_led_probe,
>>>>> +       .remove = qcom_flash_led_remove,
>>>>> +};
>>>>> +
>>>>> +module_platform_driver(qcom_flash_led_driver);
>>>>> +
>>>>> +MODULE_DESCRIPTION("QCOM Flash LED driver");
>>>>> +MODULE_LICENSE("GPL");
>>>
>>> Kind regards,
>>> Dylan Van Assche
> 
> Kind regards,
> Dylan Van Assche
>
  
Dylan Van Assche Nov. 2, 2022, 8:14 a.m. UTC | #7
Hi Fenglin,

> Hi Dylan,
> 
> 
> On 2022/11/2 1:39, Dylan Van Assche wrote:
> > 
> > Hi Fenglin,
> > 
> > > On 2022/10/31 18:34, Dylan Van Assche wrote:
> > > > 
> > > > Hi Fenglin,
> > > > 
> > > > Thanks for submitting these patches! They are really nice!
> > > > I tested these patches on an SDM845 based device as the
> > > > downstream
> > > > driver is the same for the PMI8998 compared to the mentioned
> > > > PMICs
> > > > in
> > > > this patchseries.
> > > > 
> > > > Tested-by: Dylan Van Assche <me@dylanvanassche.be> # sdm845-
> > > > shift-
> > > > axolotl + pmi8998
> > > > 
> > > Thanks for testing the patch at your side, Dylan!
> > > 
> > > > > > Add initial driver to support flash LED module found in
> > > > > > Qualcomm
> > > > > > Technologies, Inc. PMICs. The flash module can have 3 or 4
> > > > > > channels
> > > > > > and each channel can be controlled indepedently and support
> > > > > > full >
> > > > > > scale
> > > > > > current up to 1.5 A. It also supports connecting two
> > > > > > channels >
> > > > > > together
> > > > > > to supply one LED component with full scale current up to 2
> > > > > > A.
> > > > > > In >
> > > > > > that
> > > > > > case, the current will be split on each channel
> > > > > > symmetrically
> > > > > > and
> > > > > > the
> > > > > > channels will be enabled and disabled at the same time.
> > > > > > 
> > > > > > Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
> > > > > > Tested-by: Luca Weiss <luca.weiss@fairphone.com> # >
> > > > > > sm7225-
> > > > > > fairphone-fp4 + pm6150l
> > > > > > ---
> > > > > >    drivers/leds/flash/Kconfig           |  15 +
> > > > > >    drivers/leds/flash/Makefile          |   1 +
> > > > > >    drivers/leds/flash/leds-qcom-flash.c | 700 >
> > > > > > +++++++++++++++++++++++++++
> > > > > >    3 files changed, 716 insertions(+)
> > > > > >    create mode 100644 drivers/leds/flash/leds-qcom-flash.c
> > > > > > 
> > > > > > diff --git a/drivers/leds/flash/Kconfig
> > > > > > b/drivers/leds/flash/Kconfig
> > > > > > index d3eb689b193c..f36a60409290 100644
> > > > > > --- a/drivers/leds/flash/Kconfig
> > > > > > +++ b/drivers/leds/flash/Kconfig
> > > > > > @@ -61,6 +61,21 @@ config LEDS_MT6360
> > > > > >             Independent current sources supply for each
> > > > > > flash
> > > > > > LED >
> > > > > > support torch
> > > > > >             and strobe mode.
> > > > > >    
> > > > > > +config LEDS_QCOM_FLASH
> > > > > > +       tristate "LED support for flash module inside
> > > > > > Qualcomm
> > > > > > > 
> > > > > > Technologies, Inc. PMIC"
> > > > > > +       depends on MFD_SPMI_PMIC || COMPILE_TEST
> > > > > > +       depends on LEDS_CLASS && OF
> > > > > > +       depends on V4L2_FLASH_LED_CLASS ||
> > > > > > !V4L2_FLASH_LED_CLASS
> > > > > > +       select REGMAP
> > > > > > +       help
> > > > > > +         This option enables support for the flash module
> > > > > > found in
> > > > > > > Qualcomm
> > > > > > +         Technologies, Inc. PMICs. The flash module can
> > > > > > have 3
> > > > > > or
> > > > > > 4 > flash LED
> > > > > > +         channels and each channel is programmable to
> > > > > > support
> > > > > > up
> > > > > > to > 1.5 A full
> > > > > > +         scale current. It also supports connecting two
> > > > > > channels'
> > > > > > > output together
> > > > > > +         to supply one LED component to achieve current up
> > > > > > to
> > > > > > 2 A.
> > > > > > > In such case,
> > > > > > +         the total LED currentwill be split symmetrically
> > > > > > on
> > > > > > each
> > > > > > > channel and
> > > > > > +         they will be enabled/disabled at the same time.
> > > > > > +
> > > > > >    config LEDS_RT4505
> > > > > >           tristate "LED support for RT4505 flashlight
> > > > > > controller"
> > > > > >           depends on I2C && OF
> > > > > > diff --git a/drivers/leds/flash/Makefile >
> > > > > > b/drivers/leds/flash/Makefile
> > > > > > index 0acbddc0b91b..8a60993f1a25 100644
> > > > > > --- a/drivers/leds/flash/Makefile
> > > > > > +++ b/drivers/leds/flash/Makefile
> > > > > > @@ -6,6 +6,7 @@ obj-$(CONFIG_LEDS_AS3645A)      += leds-
> > > > > > as3645a.o
> > > > > >    obj-$(CONFIG_LEDS_KTD2692)     += leds-ktd2692.o
> > > > > >    obj-$(CONFIG_LEDS_LM3601X)     += leds-lm3601x.o
> > > > > >    obj-$(CONFIG_LEDS_MAX77693)    += leds-max77693.o
> > > > > > +obj-$(CONFIG_LEDS_QCOM_FLASH)  += leds-qcom-flash.o
> > > > > >    obj-$(CONFIG_LEDS_RT4505)      += leds-rt4505.o
> > > > > >    obj-$(CONFIG_LEDS_RT8515)      += leds-rt8515.o
> > > > > >    obj-$(CONFIG_LEDS_SGM3140)     += leds-sgm3140.o
> > > > > > diff --git a/drivers/leds/flash/leds-qcom-flash.c >
> > > > > > b/drivers/leds/flash/leds-qcom-flash.c
> > > > > > new file mode 100644
> > > > > > index 000000000000..a9fcf61600c3
> > > > > > --- /dev/null
> > > > > > +++ b/drivers/leds/flash/leds-qcom-flash.c
> > > > > > @@ -0,0 +1,700 @@
> > > > > > +// SPDX-License-Identifier: GPL-2.0-only
> > > > > > +/*
> > > > > > + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All
> > > > > > rights
> > > > > > > reserved.
> > > > > > + */
> > > > > > +
> > > > > > +#include <linux/bitfield.h>
> > > > > > +#include <linux/bits.h>
> > > > > > +#include <linux/leds.h>
> > > > > > +#include <linux/led-class-flash.h>
> > > > > > +#include <linux/module.h>
> > > > > > +#include <linux/platform_device.h>
> > > > > > +#include <linux/property.h>
> > > > > > +#include <linux/regmap.h>
> > > > > > +#include <media/v4l2-flash-led-class.h>
> > > > > > +
> > > > > > +/* registers definitions */
> > > > > > +#define FLASH_TYPE_REG                 0x04
> > > > > > +#define FLASH_TYPE_VAL                 0x18
> > > > > > +
> > > > > > +#define FLASH_SUBTYPE_REG              0x05
> > > > > > +#define FLASH_SUBTYPE_3CH_VAL          0x04
> > > > 
> > > > PMI8998 has also a 3 channel flash subtype, but reports 0x03 as
> > > > subtype. The driver won't probe because of this since the
> > > > subtype
> > > > did
> > > > not match. Changing this value to 0x03 made this driver work on
> > > > SDM845
> > > > based device as well with PMI8998. Would you consider
> > > > supporting
> > > > SDM845+PMI8998 as well?
> > > > 
> > > I just double checked, flash module in PMI8998 (with subtype 0x3)
> > > has
> > > very similar register definition as the flash module in PM8150C
> > > (with
> > > subtype 0x4) that the driver is intended to support, it's good
> > > know
> > > that
> > > it's 99% work.
> > > I can add the 0x3 subtype support but the only problem is I
> > > couldn't
> > > find a device with PMI8998 to test it out. Would it be good if I
> > > add
> > > the
> > > support and rely on your test result?
> > 
> > Sure! I already have a branch locally to test your patches, happy
> > to
> > help! I have an SDM845 device here with PMI8998 with 2 LEDs: cold
> > and
> > warm white.
> > 
> Thank you for the help!
> > > 
> > > > > > +#define FLASH_SUBTYPE_4CH_VAL          0x07
> > > > > > +
> > > > > > +#define FLASH_TIMER_EN_BIT             BIT(7)
> > > > > > +#define FLASH_TIMER_VAL_MASK           GENMASK(6, 0)
> > > > > > +#define FLASH_TIMER_STEP_MS            10
> > > > > > +
> > > > > > +#define FLASH_STROBE_HW_SW_SEL_BIT     BIT(2)
> > > > > > +#define SW_STROBE_VAL                  0
> > > > > > +#define HW_STROBE_VAL                  1
> > > > > > +#define FLASH_HW_STROBE_TRIGGER_SEL_BIT        BIT(1)
> > > > > > +#define STROBE_LEVEL_TRIGGER_VAL       0
> > > > > > +#define STROBE_EDGE_TRIGGER_VAL                1
> > > > > > +#define FLASH_STROBE_POLARITY_BIT      BIT(0)
> > > > > > +#define STROBE_ACTIVE_HIGH_VAL         1
> > > > > > +
> > > > > > +#define FLASH_IRES_MASK_4CH            BIT(0)
> > > > > > +#define FLASH_IRES_MASK_3CH            GENMASK(1, 0)
> > > > > > +#define FLASH_IRES_12P5MA_VAL          0
> > > > > > +#define FLASH_IRES_5MA_VAL_4CH         1
> > > > > > +#define FLASH_IRES_5MA_VAL_3CH         3
> > > > > > +
> > > > > > +/* constants */
> > > > > > +#define FLASH_CURRENT_MAX_UA           1500000
> > > > > > +#define TORCH_CURRENT_MAX_UA           500000
> > > > > > +#define FLASH_TOTAL_CURRENT_MAX_UA     2000000
> > > > > > +#define FLASH_CURRENT_DEFAULT_UA       1000000
> > > > > > +#define TORCH_CURRENT_DEFAULT_UA       200000
> > > > > > +
> > > > > > +#define TORCH_IRES_UA                  5000
> > > > > > +#define FLASH_IRES_UA                  12500
> > > > > > +
> > > > > > +#define FLASH_TIMEOUT_MAX_US           1280000
> > > > > > +#define FLASH_TIMEOUT_STEP_US          10000
> > > > > > +
> > > > > > +enum hw_type {
> > > > > > +       QCOM_MVFLASH_3CH,
> > > > > > +       QCOM_MVFLASH_4CH,
> > > > > > +};
> > > > > > +
> > > > > > +enum led_mode {
> > > > > > +       FLASH_MODE,
> > > > > > +       TORCH_MODE,
> > > > > > +};
> > > > > > +
> > > > > > +enum led_strobe {
> > > > > > +       SW_STROBE,
> > > > > > +       HW_STROBE,
> > > > > > +};
> > > > > > +
> > > > > > +enum {
> > > > > > +       REG_STATUS1,
> > > > > > +       REG_STATUS2,
> > > > > > +       REG_STATUS3,
> > > > > > +       REG_CHAN_TIMER,
> > > > > > +       REG_ITARGET,
> > > > > > +       REG_MODULE_EN,
> > > > > > +       REG_IRESOLUTION,
> > > > > > +       REG_CHAN_STROBE,
> > > > > > +       REG_CHAN_EN,
> > > > > > +       REG_MAX_COUNT,
> > > > > > +};
> > > > > > +
> > > > > > +struct reg_field mvflash_3ch_regs[REG_MAX_COUNT] = {
> > > > > > +       REG_FIELD(0x08, 0, 7),                  /*
> > > > > > status1      */
> > > > > > +       REG_FIELD(0x09, 0, 7),                  /*
> > > > > > status2      */
> > > > > > +       REG_FIELD(0x0a, 0, 7),                  /*
> > > > > > status3      */
> > > > > > +       REG_FIELD_ID(0x40, 0, 7, 3, 1),         /*
> > > > > > chan_timer   */
> > > > > > +       REG_FIELD_ID(0x43, 0, 6, 3, 1),         /*
> > > > > > itarget      */
> > > > > > +       REG_FIELD(0x46, 7, 7),                  /*
> > > > > > module_en    */
> > > > > > +       REG_FIELD(0x47, 0, 5),                  /*
> > > > > > iresolution  */
> > > > > > +       REG_FIELD_ID(0x49, 0, 2, 3, 1),         /*
> > > > > > chan_strobe  */
> > > > > > +       REG_FIELD(0x4c, 0, 2),                  /*
> > > > > > chan_en      */
> > > > > > +};
> > > > 
> > > > These registers map perfectly for SDM845 with PMI8998 as well,
> > > > adding
> > > > support for this subtype (0x03) would be great.
> > > > 
> > > > > > +
> > > > > > +struct reg_field mvflash_4ch_regs[REG_MAX_COUNT] = {
> > > > > > +       REG_FIELD(0x06, 0, 7),                  /*
> > > > > > status1      */
> > > > > > +       REG_FIELD(0x07, 0, 6),                  /*
> > > > > > status2      */
> > > > > > +       REG_FIELD(0x09, 0, 7),                  /*
> > > > > > status3      */
> > > > > > +       REG_FIELD_ID(0x3e, 0, 7, 4, 1),         /*
> > > > > > chan_timer   */
> > > > > > +       REG_FIELD_ID(0x42, 0, 6, 4, 1),         /*
> > > > > > itarget      */
> > > > > > +       REG_FIELD(0x46, 7, 7),                  /*
> > > > > > module_en    */
> > > > > > +       REG_FIELD(0x49, 0, 3),                  /*
> > > > > > iresolution  */
> > > > > > +       REG_FIELD_ID(0x4a, 0, 6, 4, 1),         /*
> > > > > > chan_strobe  */
> > > > > > +       REG_FIELD(0x4e, 0, 3),                  /*
> > > > > > chan_en      */
> > > > > > +};
> > > > > > +
> > > > > > +struct qcom_flash_led {
> > > > > > +       struct qcom_flash_chip          *chip;
> > > > > > +       struct led_classdev_flash       flash;
> > > > > > +       struct v4l2_flash               *v4l2_flash;
> > > > > > +       u32                             max_flash_current_m
> > > > > > a;
> > > > > > +       u32                             max_torch_current_m
> > > > > > a;
> > > > > > +       u32                             max_timeout_ms;
> > > > > > +       u32                             flash_current_ma;
> > > > > > +       u32                             flash_timeout_ms;
> > > > > > +       u8                              *chan_id;
> > > > > > +       u8                              chan_count;
> > > > > > +       bool                            enabled;
> > > > > > +};
> > > > > > +
> > > > > > +struct qcom_flash_chip {
> > > > > > +       struct qcom_flash_led   *leds;
> > > > > > +       struct regmap_field     *r_fields[REG_MAX_COUNT];
> > > > > > +       struct device           *dev;
> > > > > > +       struct mutex            lock;
> > > > > > +       enum hw_type            hw_type;
> > > > > > +       u8                      leds_count;
> > > > > > +       u8                      max_channels;
> > > > > > +       u8                      chan_en_bits;
> > > > > > +};
> > > > > > +
> > > > > > +static int set_flash_module_en(struct qcom_flash_led *led,
> > > > > > bool
> > > > > > en)
> > > > > > +{
> > > > > > +       struct qcom_flash_chip *chip= led->chip;
> > > > > > +       u8 led_mask = 0, val;
> > > > > > +       int i, rc;
> > > > > > +
> > > > > > +       for (i = 0; i < led->chan_count; i++)
> > > > > > +               led_mask |= BIT(led->chan_id[i] - 1);
> > > > > > +
> > > > > > +       mutex_lock(&chip->lock);
> > > > > > +       if (en)
> > > > > > +               chip->chan_en_bits |= led_mask;
> > > > > > +       else
> > > > > > +               chip->chan_en_bits &= ~led_mask;
> > > > > > +
> > > > > > +       val = !!chip->chan_en_bits;
> > > > > > +       rc = regmap_field_write(chip-
> > > > > > >r_fields[REG_MODULE_EN],
> > > > > > val);
> > > > > > +       if (rc < 0)
> > > > > > +               dev_err(chip->dev, "write module_en failed,
> > > > > > rc=%d\n", > rc);
> > > > > > +       mutex_unlock(&chip->lock);
> > > > > > +
> > > > > > +       return rc;
> > > > > > +}
> > > > > > +
> > > > > > +static int set_flash_current(struct qcom_flash_led *led,
> > > > > > u32 >
> > > > > > current_ma, enum led_mode mode)
> > > > > > +{
> > > > > > +       struct qcom_flash_chip *chip= led->chip;
> > > > > > +       u32 itarg_ua = current_ma * 1000 / led->chan_count
> > > > > > + 1;
> > > > > > +       u32 ires_ua = (mode ==FLASH_MODE) ? FLASH_IRES_UA :
> > > > > > >
> > > > > > TORCH_IRES_UA;
> > > > > > +       u8 val, shift, ires_mask =0, ires_val = 0, chan_id;
> > > > > > +       int i, rc;
> > > > > > +
> > > > > > +       /*
> > > > > > +        * Split the current across the channels and set
> > > > > > the
> > > > > > +        * IRESOLUTION and ITARGET registers accordingly.
> > > > > > +        */
> > > > > > +       for (i = 0; i < led->chan_count; i++) {
> > > > > > +               chan_id = led->chan_id[i];
> > > > > > +               if (itarg_ua < ires_ua)
> > > > > > +                       val = 0;
> > > > > > +               else
> > > > > > +                       val = itarg_ua / ires_ua - 1;
> > > > > > +
> > > > > > +               rc = regmap_fields_write(chip-
> > > > > > > r_fields[REG_ITARGET], > chan_id - 1, val);
> > > > > > +               if (rc < 0)
> > > > > > +                       returnrc;
> > > > > > +
> > > > > > +               if (chip->hw_type == QCOM_MVFLASH_3CH) {
> > > > > > +                       shift = (chan_id - 1) * 2;
> > > > > > +                       ires_mask |= FLASH_IRES_MASK_3CH <<
> > > > > > shift;
> > > > > > +                       ires_val |= ((mode == FLASH_MODE) ?
> > > > > > +                               (FLASH_IRES_12P5MA_VAL <<
> > > > > > shift) :
> > > > > > +                               (FLASH_IRES_5MA_VAL_3CH <<
> > > > > > shift));
> > > > > > +               } else if (chip->hw_type ==
> > > > > > QCOM_MVFLASH_4CH) {
> > > > > > +                       shift = chan_id - 1;
> > > > > > +                       ires_mask |= FLASH_IRES_MASK_4CH <<
> > > > > > shift;
> > > > > > +                       ires_val |= ((mode == FLASH_MODE) ?
> > > > > > +                               (FLASH_IRES_12P5MA_VAL <<
> > > > > > shift) :
> > > > > > +                               (FLASH_IRES_5MA_VAL_4CH <<
> > > > > > shift));
> > > > > > +               }
> > > > > > +       }
> > > > > > +
> > > > > > +       return > regmap_field_update_bits(chip-
> > > > > > > r_fields[REG_IRESOLUTION], ires_mask, > ires_val);
> > > > > > +}
> > > > > > +
> > > > > > +static int set_flash_timeout(struct qcom_flash_led *led,
> > > > > > u32 >
> > > > > > timeout_ms)
> > > > > > +{
> > > > > > +       struct qcom_flash_chip *chip= led->chip;
> > > > > > +       u8 val, chan_id;
> > > > > > +       int rc, i;
> > > > > > +
> > > > > > +       /* set SAFETY_TIMER for all the channels connected
> > > > > > to
> > > > > > the >
> > > > > > same LED */
> > > > > > +       timeout_ms = min_t(u32, timeout_ms, led-
> > > > > > > max_timeout_ms);
> > > > > > +       for (i = 0; i < led->chan_count; i++) {
> > > > > > +               chan_id = led->chan_id[i];
> > > > > > +               val = timeout_ms / FLASH_TIMER_STEP_MS;
> > > > > > +               val = clamp_t(u8, val, 0,
> > > > > > FLASH_TIMER_VAL_MASK);
> > > > > > +               if (timeout_ms)
> > > > > > +                       val |= FLASH_TIMER_EN_BIT;
> > > > > > +
> > > > > > +               rc = > regmap_fields_write(chip-
> > > > > > > r_fields[REG_CHAN_TIMER], chan_id - 1, > val);
> > > > > > +               if (rc < 0)
> > > > > > +                       returnrc;
> > > > > > +       }
> > > > > > +
> > > > > > +       return 0;
> > > > > > +}
> > > > > > +
> > > > > > +static int set_flash_strobe(struct qcom_flash_led *led,
> > > > > > enum >
> > > > > > led_strobe strobe, bool state)
> > > > > > +{
> > > > > > +       struct qcom_flash_chip *chip= led->chip;
> > > > > > +       u8 mask, val, chan_id = 0,chan_mask = 0;
> > > > > > +       int rc, i;
> > > > > > +
> > > > > > +       /* Set SW strobe config for all channels connected
> > > > > > to
> > > > > > the
> > > > > > LED > */
> > > > > > +       for (i = 0; i < led->chan_count; i++) {
> > > > > > +               chan_id = led->chan_id[i];
> > > > > > +               if (strobe == SW_STROBE)
> > > > > > +                       val =
> > > > > > FIELD_PREP(FLASH_STROBE_HW_SW_SEL_BIT, > SW_STROBE_VAL);
> > > > > > +               else
> > > > > > +                       val =
> > > > > > FIELD_PREP(FLASH_STROBE_HW_SW_SEL_BIT, > HW_STROBE_VAL);
> > > > > > +
> > > > > > +               val |=
> > > > > > FIELD_PREP(FLASH_HW_STROBE_TRIGGER_SEL_BIT,
> > > > > > > STROBE_LEVEL_TRIGGER_VAL) |
> > > > > > +                       FIELD_PREP(FLASH_STROBE_POLARITY_BI
> > > > > > T, >
> > > > > > STROBE_ACTIVE_HIGH_VAL);
> > > > > > +               rc = > regmap_fields_write(chip-
> > > > > > > r_fields[REG_CHAN_STROBE], chan_id - 1, > val);
> > > > > > +               if (rc < 0)
> > > > > > +                       returnrc;
> > > > > > +
> > > > > > +               chan_mask |= BIT(chan_id - 1);
> > > > > > +       }
> > > > > > +
> > > > > > +       /* enable/disable flash channels */
> > > > > > +       mask = chan_mask;
> > > > > > +       val = state ? mask : 0;
> > > > > > +       rc = regmap_field_update_bits(chip-
> > > > > > > r_fields[REG_CHAN_EN],
> > > > > > > mask, val);
> > > > > > +       if (rc < 0)
> > > > > > +               return rc;
> > > > > > +
> > > > > > +       led->enabled = state;
> > > > > > +       return 0;
> > > > > > +}
> > > > > > +
> > > > > > +static int qcom_flash_brightness_set(struct
> > > > > > led_classdev_flash
> > > > > > > 
> > > > > > *fled_cdev, u32 brightness)
> > > > > > +{
> > > > > > +       struct qcom_flash_led *led =
> > > > > > container_of(fled_cdev,
> > > > > > struct
> > > > > > > qcom_flash_led, flash);
> > > > > > +
> > > > > > +       led->flash_current_ma = min_t(u32, led-
> > > > > > > max_flash_current_ma, > brightness / 1000);
> > > > > > +       return 0;
> > > > > > +}
> > > > 
> > > > This doesn't seem to work in torch mode for me on PMI8998. If
> > > > the
> > > > brightness is 0, the torch is OFF as expected, but when the
> > > > torch
> > > > is
> > > > ON, you cannot control the brightness. The brightness is the
> > > > same
> > > > for
> > > > [1, 255]. If the hardware cannot change the brightness in torch
> > > > mode,
> > > > it would be nice to report a max_brightness value of 1 instead
> > > > of
> > > > 255
> > > > for userspace. This could be a limitation of the PMI8998, not
> > > > sure.
> > > > Do you have any insights here? This driver is already 99%
> > > > working
> > > > for
> > > > SDM845+PMI8998.
> > > > 
> > > > Flash mode works great, timeout & brightness can be configured
> > > > just
> > > > fine.
> > > > 
> > > 
> > > Here, function qcom_flash_brightness_set() is used for setting
> > > brightness in flash mode and it was supposed to be working with
> > > following commands combination:
> > >          echo xxx > flash_brightness
> > >          echo 1 > flash_strobe  (you will need to toggle
> > > flash_strobe
> > > when you
> > > enabling it again)
> > > 
> > > Can you check if you can see the brightness change in flash mode
> > > when
> > > you updating the flash_brightness value with these commands?
> > > 
> > > You can echo any value between [0, max_flash_brightness] into the
> > > flash_brightness, there is a "max_flash_brightness" sysfs node
> > > and
> > > the
> > > value comes from DT property "flash-max-microamp", ex. my dtsi
> > > node
> > > has
> > > "flash-max-microamp = <2000000>;" defined so I am having
> > > following
> > > value
> > > for max_flash_brightness:
> > > 
> > > kalama:/sys/class/leds/white:flash-0 # cat max_flash_brightness
> > > 2000000
> > > 
> > > And by default flash mode uses 12500uA resolution so you won't
> > > see
> > > brightness change when you update it with values between [1,
> > > 12500].
> > 
> > Yes, this works perfectly fine on PMI8998. I can adjust the flash
> > brightness and flash timeout perfectly.
> > 
> > > 
> > > If you want to update the brightness for torch node, you can
> > > directly
> > > update the "brightness" node with values between [0, 255], and
> > > it's
> > > mapping to the torch current between [0, led-max-microamp].
> > > "led-max-microamp" is also has value coming from the DT property.
> > > 
> > > This worked at my side on both pm8150C and pm8550.I think it
> > > should
> > > work
> > > on PMI8998 as well because the flash module in it is very similar
> > > to
> > > the
> > > one in PM8150c. Let me know if you still see such issues at your
> > > side.
> > > Thanks
> > 
> > Only here I have an issue with PMI8998: the "brightness" nodes
> > should
> > change the brightness of the torch, but it doesn't make a
> > difference
> > here. When I do:
> > 
> > - echo 0 > brightness --> LED turns OFF
> > - echo 255 > brightness --> LED turns ON
> > - echo 100 > brightness --> LED is still ON, but brightness is the
> > same
> > as with 255.
> > 
> > Could it be that PMI8998 is slightly different here than with
> > PM8150c
> > for example? Maybe it doesn't support brightness for torch?
> > 
> > Here's my DTS:
> > 
> > *PMI8998*
> > 
> > pmi8998_flash: led-controller@d300 {
> >         compatible = "qcom,pm6150l-flash-led", "qcom,spmi-flash-
> > led";
> >         reg = <0xd300>;
> >         status = "disabled";
> > };
> > 
> > *SDM845 SHIFT axolotl*
> > 
> > &pmi8998_flash {
> >         status = "okay";
> > 
> >         led-0 {
> >                 function = LED_FUNCTION_FLASH;
> >                 color = <LED_COLOR_ID_WHITE>;
> >                 led-sources = <1>;
> >                 led-max-microamp = <180000>;
> >                 flash-max-microamp = <1000000>;
> >                 flash-max-timeout-us = <1280000>;
> >         };
> > 
> >         led-1 {
> >                 function = LED_FUNCTION_FLASH;
> >                 color = <LED_COLOR_ID_YELLOW>;
> >                 led-sources = <2>;
> >                 led-max-microamp = <180000>;
> >                 flash-max-microamp = <1000000>;
> >                 flash-max-timeout-us = <1280000>;
> >         };
> > };
> > 
> Thank you for getting back all the details. The devicetree node looks
> good to me.
> 
> I checked again and confirmed that the flash modules in PMI8998 and 
> PM8150C have the same register definition for ITARGETx (0xD343 + x)
> and 
> IRESOLUTION (0xD347), these are the only 2 settings would impact LED 
> brightness, and in torch mode, IRESOLUTION is fixed to 5mA and only 
> ITARGET is updated accordingly.
> 
> I updated my workspace to use the same current for torch mode as your
> settings in devicetree and tried again on my PM8150C device,I could 
> notice the brightness change when echoing different values to the 
> brightness sysfs node, however, when I updating values between 255
> and 
> 200, it wasn't a very noticeable brightness change with naked eys,
> but I 
> could see the ITRAGETx register changed accordingly when reading its 
> value back from the regmap debugfs node.
> 
> Can you try the same and see if the register got updated accordingly 
> when you updating brightness values? If yes, I would wonder if the
> LED 
> component on your device has upper current limit in torch mode close
> to 
> (100 / 255 ) * 180mA so you that you can't observe the brightness
> change 
> when updating between 100 to 255. Another easier thing to try, can
> you 
> echo a lower brightness value, such as 10, to see if you can notice
> the 
> brightness change?
> 

Aha! It does seem to work partially!

I tried it with brightness 0 --> 255 --> 1. This order keeps the
highest brightness at all times, matching 255. The other way around: 0
--> 1 --> 255 keeps the lowest brightness, matching 1.
Changing the brightness only works if the LED was turned OFF first:

0 --> 255 --> 0 --> 1 
0 --> 1 --> 0 --> 255 

both work fine, verified it with the following shell commands (assumed
that the LED was turned OFF to start):

echo 1 > brightness && sleep 3 && echo 0 > brightness && echo 255 >
brightness
echo 255 > brightness && sleep 3 &&  echo 0 > brightness && echo 1 >
brightness

Maybe a register needs to be reset when the brightness changes?

> > 
> > > 
> > > > > > +
> > > > > > +static int qcom_flash_timeout_set(struct
> > > > > > led_classdev_flash >
> > > > > > *fled_cdev, u32 timeout)
> > > > > > +{
> > > > > > +       struct qcom_flash_led *led =
> > > > > > container_of(fled_cdev,
> > > > > > struct
> > > > > > > qcom_flash_led, flash);
> > > > > > +
> > > > > > +       led->flash_timeout_ms = timeout / 1000;
> > > > > > +       return 0;
> > > > > > +}
> > > > > > +
> > > > > > +static int qcom_flash_strobe_set(struct led_classdev_flash
> > > > > > >
> > > > > > *fled_cdev, bool state)
> > > > > > +{
> > > > > > +       struct qcom_flash_led *led =
> > > > > > container_of(fled_cdev,
> > > > > > struct
> > > > > > > qcom_flash_led, flash);
> > > > > > +       int rc;
> > > > > > +
> > > > > > +       rc = set_flash_current(led, led->flash_current_ma,
> > > > > > >
> > > > > > FLASH_MODE);
> > > > > > +       if (rc < 0)
> > > > > > +               return rc;
> > > > > > +
> > > > > > +       rc = set_flash_timeout(led, led->flash_timeout_ms);
> > > > > > +       if (rc < 0)
> > > > > > +               return rc;
> > > > > > +
> > > > > > +       rc = set_flash_module_en(led, state);
> > > > > > +       if (rc < 0)
> > > > > > +               return rc;
> > > > > > +
> > > > > > +       return set_flash_strobe(led,SW_STROBE, state);
> > > > > > +}
> > > > > > +
> > > > > > +static int qcom_flash_strobe_get(struct led_classdev_flash
> > > > > > >
> > > > > > *fled_cdev, bool *state)
> > > > > > +{
> > > > > > +       struct qcom_flash_led *led =
> > > > > > container_of(fled_cdev,
> > > > > > struct
> > > > > > > qcom_flash_led, flash);
> > > > > > +
> > > > > > +       *state = led->enabled;
> > > > > > +       return 0;
> > > > > > +}
> > > > > > +
> > > > > > +static int qcom_flash_fault_get(struct led_classdev_flash
> > > > > > >
> > > > > > *fled_cdev, u32 *fault)
> > > > > > +{
> > > > > > +       struct qcom_flash_led *led =
> > > > > > container_of(fled_cdev,
> > > > > > struct
> > > > > > > qcom_flash_led, flash);
> > > > > > +       struct qcom_flash_chip *chip= led->chip;
> > > > > > +       u8 shift, chan_id = 0, chan_mask = 0;
> > > > > > +       u8 ot_mask = 0, oc_mask = 0, uv_mask = 0;
> > > > > > +       u32 val, fault_sts = 0;
> > > > > > +       int i, rc;
> > > > > > +
> > > > > > +       rc = regmap_field_read(chip->r_fields[REG_STATUS1],
> > > > > > &val);
> > > > > > +       if (rc < 0)
> > > > > > +               return rc;
> > > > > > +
> > > > > > +       for (i = 0; i < led->chan_count; i++) {
> > > > > > +               chan_id = led->chan_id[i];
> > > > > > +               shift = (chan_id - 1) * 2;
> > > > > > +               if (val & BIT(shift))
> > > > > > +                       fault_sts |=
> > > > > > LED_FAULT_SHORT_CIRCUIT;
> > > > > > +               chan_mask |= BIT(chan_id - 1);
> > > > > > +       }
> > > > > > +
> > > > > > +       rc = regmap_field_read(chip->r_fields[REG_STATUS2],
> > > > > > &val);
> > > > > > +       if (rc < 0)
> > > > > > +               return rc;
> > > > > > +
> > > > > > +       if (chip->hw_type == QCOM_MVFLASH_3CH) {
> > > > > > +               ot_mask = 0x0f;
> > > > > > +               oc_mask = 0xe0;
> > > > > > +               uv_mask = 0x10;
> > > > > > +       } else if (chip->hw_type == QCOM_MVFLASH_4CH) {
> > > > > > +               ot_mask = 0x70;
> > > > > > +               oc_mask = 0x0e;
> > > > > > +               uv_mask = 0x01;
> > > > > > +       }
> > > > > > +
> > > > > > +       if (val & ot_mask)
> > > > > > +               fault_sts |= LED_FAULT_OVER_TEMPERATURE;
> > > > > > +       if (val & oc_mask)
> > > > > > +               fault_sts |= LED_FAULT_OVER_CURRENT;
> > > > > > +       if (val & uv_mask)
> > > > > > +               fault_sts |= LED_FAULT_INPUT_VOLTAGE;
> > > > > > +
> > > > > > +       rc = regmap_field_read(chip->r_fields[REG_STATUS3],
> > > > > > &val);
> > > > > > +       if (rc < 0)
> > > > > > +               return rc;
> > > > > > +
> > > > > > +       if (chip->hw_type == QCOM_MVFLASH_3CH) {
> > > > > > +               if (val & chan_mask)
> > > > > > +                       fault_sts |= LED_FAULT_TIMEOUT;
> > > > > > +       } else if (chip->hw_type == QCOM_MVFLASH_4CH) {
> > > > > > +               for (i = 0; i < led->chan_count; i++) {
> > > > > > +                       chan_id = led->chan_id[i];
> > > > > > +                       shift = (chan_id - 1) * 2;
> > > > > > +                       if (val & BIT(shift))
> > > > > > +                               fault_sts |=
> > > > > > LED_FAULT_TIMEOUT;
> > > > > > +               }
> > > > > > +       }
> > > > > > +
> > > > > > +       *fault = fault_sts;
> > > > > > +       return 0;
> > > > > > +}
> > > > > > +
> > > > > > +static int qcom_flash_led_brightness_set(struct
> > > > > > led_classdev >
> > > > > > *led_cdev,
> > > > > > +                                       enum led_brightness
> > > > > > >
> > > > > > brightness)
> > > > > > +{
> > > > > > +       struct led_classdev_flash *fled_cdev =
> > > > > > +               container_of(led_cdev, struct
> > > > > > led_classdev_flash, >
> > > > > > led_cdev);
> > > > > > +       struct qcom_flash_led *led =
> > > > > > +               container_of(fled_cdev, struct
> > > > > > qcom_flash_led,
> > > > > > > 
> > > > > > flash);
> > > > > > +       u32 current_ma = brightness * led-
> > > > > > >max_torch_current_ma
> > > > > > / >
> > > > > > LED_FULL;
> > > > > > +       bool enable = !!brightness;
> > > > > > +       int rc;
> > > > > > +
> > > > > > +       rc = set_flash_current(led, current_ma,
> > > > > > TORCH_MODE);
> > > > > > +       if (rc < 0)
> > > > > > +               return rc;
> > > > > > +
> > > > > > +       /* disable flash timeout fortorch LED */
> > > > > > +       rc = set_flash_timeout(led, 0);
> > > > > > +       if (rc < 0)
> > > > > > +               return rc;
> > > > > > +
> > > > > > +       rc = set_flash_module_en(led, enable);
> > > > > > +       if (rc < 0)
> > > > > > +               return rc;
> > > > > > +
> > > > > > +       return set_flash_strobe(led,SW_STROBE, enable);
> > > > > > +}
> > > > > > +
> > > > > > +static const struct led_flash_ops qcom_flash_ops = {
> > > > > > +       .flash_brightness_set = qcom_flash_brightness_set,
> > > > > > +       .strobe_set = qcom_flash_strobe_set,
> > > > > > +       .strobe_get = qcom_flash_strobe_get,
> > > > > > +       .timeout_set = qcom_flash_timeout_set,
> > > > > > +       .fault_get = qcom_flash_fault_get,
> > > > > > +};
> > > > > > +
> > > > > > +#if IS_ENABLED(CONFIG_V4L2_FLASH_LED_CLASS)
> > > > > > +static int qcom_flash_external_strobe_set(struct
> > > > > > v4l2_flash >
> > > > > > *v4l2_flash, bool enable)
> > > > > > +{
> > > > > > +       struct led_classdev_flash *flash = v4l2_flash-
> > > > > > > fled_cdev;
> > > > > > +       struct qcom_flash_led *led = container_of(flash,
> > > > > > struct
> > > > > > > 
> > > > > > qcom_flash_led, flash);
> > > > > > +       int rc;
> > > > > > +
> > > > > > +       rc = set_flash_module_en(led, enable);
> > > > > > +       if (rc < 0)
> > > > > > +               return rc;
> > > > > > +
> > > > > > +       if (enable)
> > > > > > +               return set_flash_strobe(led, HW_STROBE,
> > > > > > true);
> > > > > > +       else
> > > > > > +               return set_flash_strobe(led, SW_STROBE,
> > > > > > false);
> > > > > > +}
> > > > > > +
> > > > > > +static enum led_brightness
> > > > > > qcom_flash_intensity_to_led_brightness(
> > > > > > +               struct v4l2_flash *v4l2_flash, s32
> > > > > > intensity)
> > > > > > +{
> > > > > > +       struct led_classdev_flash *flash = v4l2_flash-
> > > > > > > fled_cdev;
> > > > > > +       struct qcom_flash_led *led = container_of(flash,
> > > > > > struct
> > > > > > > 
> > > > > > qcom_flash_led, flash);
> > > > > > +       u32 current_ma = intensity/ 1000;
> > > > > > +
> > > > > > +       current_ma = min_t(u32, current_ma, > led-
> > > > > > > max_torch_current_ma);
> > > > > > +       if (!current_ma)
> > > > > > +               return LED_OFF;
> > > > > > +
> > > > > > +       return current_ma * LED_FULL/ led-
> > > > > > > max_torch_current_ma;
> > > > > > +}
> > > > > > +
> > > > > > +static s32 qcom_flash_brightness_to_led_intensity(struct
> > > > > > v4l2_flash > *v4l2_flash,
> > > > > > +                                       enum led_brightness
> > > > > > >
> > > > > > brightness)
> > > > > > +{
> > > > > > +       struct led_classdev_flash *flash = v4l2_flash-
> > > > > > > fled_cdev;
> > > > > > +       struct qcom_flash_led *led = container_of(flash,
> > > > > > struct
> > > > > > > 
> > > > > > qcom_flash_led, flash);
> > > > > > +
> > > > > > +       return (brightness * led->max_torch_current_ma *
> > > > > > 1000)
> > > > > > / >
> > > > > > LED_FULL;
> > > > > > +}
> > > > > > +
> > > > > > +static const struct v4l2_flash_ops qcom_v4l2_flash_ops = {
> > > > > > +       .external_strobe_set =
> > > > > > qcom_flash_external_strobe_set,
> > > > > > +       .intensity_to_led_brightness= >
> > > > > > qcom_flash_intensity_to_led_brightness,
> > > > > > +       .led_brightness_to_intensity= >
> > > > > > qcom_flash_brightness_to_led_intensity,
> > > > > > +};
> > > > > > +
> > > > > > +static int qcom_flash_v4l2_init(struct qcom_flash_led
> > > > > > *led,
> > > > > > struct
> > > > > > > fwnode_handle *fwnode)
> > > > > > +{
> > > > > > +       struct v4l2_flash_config v4l2_cfg = {0};
> > > > > > +       struct led_flash_setting *s = &v4l2_cfg.intensity;
> > > > > > +
> > > > > > +       if (!(led->flash.led_cdev.flags &
> > > > > > LED_DEV_CAP_FLASH))
> > > > > > +               return 0;
> > > > > > +
> > > > > > +       s->min = s->step = TORCH_IRES_UA * led->chan_count;
> > > > > > +       s->max = led->max_torch_current_ma * 1000;
> > > > > > +       s->val = min_t(u32, s->max,
> > > > > > TORCH_CURRENT_DEFAULT_UA);
> > > > > > +
> > > > > > +       strscpy(v4l2_cfg.dev_name, >led-
> > > > > > >flash.led_cdev.dev-
> > > > > > > kobj.name,
> > > > > > +                                       sizeof(v4l2_cfg.dev
> > > > > > _nam
> > > > > > e));
> > > > > > +       v4l2_cfg.has_external_strobe= 1;
> > > > > > +       v4l2_cfg.flash_faults = LED_FAULT_INPUT_VOLTAGE | >
> > > > > > LED_FAULT_OVER_CURRENT |
> > > > > > +               LED_FAULT_SHORT_CIRCUIT |
> > > > > > LED_FAULT_OVER_TEMPERATURE > | LED_FAULT_TIMEOUT;
> > > > > > +
> > > > > > +       led->v4l2_flash = v4l2_flash_init(led->chip->dev,
> > > > > > fwnode, >
> > > > > > &led->flash,
> > > > > > +                                       &qcom_v4l2_flash_op
> > > > > > s, >
> > > > > > &v4l2_cfg);
> > > > > > +       return PTR_ERR_OR_ZERO(led->v4l2_flash);
> > > > > > +}
> > > > > > +# else
> > > > > > +static int qcom_flash_v4l2_init(struct qcom_flash_led
> > > > > > *led,
> > > > > > struct
> > > > > > > fwnode_handle *fwnode)
> > > > > > +{
> > > > > > +       return 0;
> > > > > > +}
> > > > > > +#endif
> > > > > > +
> > > > > > +static int qcom_flash_register_led_device(struct device
> > > > > > *parent,
> > > > > > +               struct fwnode_handle *node, struct
> > > > > > qcom_flash_led >
> > > > > > *led)
> > > > > > +{
> > > > > > +       struct qcom_flash_chip *chip= led->chip;
> > > > > > +       struct led_init_data init_data;
> > > > > > +       struct led_classdev_flash *flash;
> > > > > > +       struct led_flash_setting *s;
> > > > > > +       u32 count, val;
> > > > > > +       u32 channels[4];
> > > > > > +       int i, rc;
> > > > > > +
> > > > > > +       flash = &led->flash;
> > > > > > +       count = fwnode_property_count_u32(node, "led-
> > > > > > sources");
> > > > > > +       if (count <= 0) {
> > > > > > +               dev_err(chip->dev, "No led-sources
> > > > > > specified\n");
> > > > > > +               return -ENODEV;
> > > > > > +       }
> > > > > > +
> > > > > > +       if (count > chip->max_channels) {
> > > > > > +               dev_err(chip->dev, "led-sources count %u
> > > > > > exceeds >
> > > > > > maximum channel count %u\n",
> > > > > > +                               count, chip->max_channels);
> > > > > > +               return -EINVAL;
> > > > > > +       }
> > > > > > +
> > > > > > +       rc = fwnode_property_read_u32_array(node, "led-
> > > > > > sources", >
> > > > > > channels, count);
> > > > > > +       if (rc < 0) {
> > > > > > +               dev_err(chip->dev, "get led-sources failed,
> > > > > > rc=%d\n", > rc);
> > > > > > +               return rc;
> > > > > > +       }
> > > > > > +
> > > > > > +       led->chan_count = count;
> > > > > > +       led->chan_id = devm_kcalloc(chip->dev, count,
> > > > > > sizeof(u8), >
> > > > > > GFP_KERNEL);
> > > > > > +       if (!led->chan_id)
> > > > > > +               return -ENOMEM;
> > > > > > +
> > > > > > +       for (i = 0; i < count; i++) {
> > > > > > +               if (channels[i] > chip->max_channels) {
> > > > > > +                       dev_err(chip->dev, "led-source out
> > > > > > of
> > > > > > HW >
> > > > > > support range [1-%u]\n",
> > > > > > +                                       chip-
> > > > > > >max_channels);
> > > > > > +                       return-EINVAL;
> > > > > > +               }
> > > > > > +
> > > > > > +               led->chan_id[i] = channels[i];
> > > > > > +       }
> > > > > > +
> > > > > > +       rc = fwnode_property_read_u32(node, "led-max-
> > > > > > microamp",
> > > > > > > 
> > > > > > &val);
> > > > > > +       if (rc < 0) {
> > > > > > +               dev_err(chip->dev, "Get led-max-microamp
> > > > > > failed, >
> > > > > > rc=%d\n", rc);
> > > > > > +               return rc;
> > > > > > +       }
> > > > > > +
> > > > > > +       if (!val) {
> > > > > > +               dev_err(chip->dev, "led-max-microamp
> > > > > > shouldn't
> > > > > > be >
> > > > > > 0\n");
> > > > > > +               return -EINVAL;
> > > > > > +       }
> > > > > > +
> > > > > > +       val = min_t(u32, val, TORCH_CURRENT_MAX_UA * > led-
> > > > > > > chan_count);
> > > > > > +       led->max_torch_current_ma = val / 1000;
> > > > > > +
> > > > > > +       if (fwnode_property_present(node, "flash-max-
> > > > > > microamp")) {
> > > > > > +               flash->led_cdev.flags |= LED_DEV_CAP_FLASH;
> > > > > > +               rc = fwnode_property_read_u32(node, >
> > > > > > "flash-
> > > > > > max-
> > > > > > microamp", &val);
> > > > > > +               if (rc < 0) {
> > > > > > +                       dev_err(chip->dev, "Get flash-max-
> > > > > > microamp
> > > > > > > failed, rc=%d\n", rc);
> > > > > > +                       returnrc;
> > > > > > +               }
> > > > > > +
> > > > > > +               val = min_t(u32, val, FLASH_CURRENT_MAX_UA
> > > > > > * >
> > > > > > led-
> > > > > > > chan_count);
> > > > > > +               val = min_t(u32, val,
> > > > > > FLASH_TOTAL_CURRENT_MAX_UA);
> > > > > > +               s = &flash->brightness;
> > > > > > +               s->min = s->step = FLASH_IRES_UA * led-
> > > > > > > chan_count;
> > > > > > +               s->max = val;
> > > > > > +               s->val = min_t(u32, val,
> > > > > > FLASH_CURRENT_DEFAULT_UA);
> > > > > > +               led->max_flash_current_ma = val / 1000;
> > > > > > +               led->flash_current_ma = s->val / 1000;
> > > > > > +
> > > > > > +               rc = fwnode_property_read_u32(node, >
> > > > > > "flash-
> > > > > > max-
> > > > > > timeout-us", &val);
> > > > > > +               if (rc < 0) {
> > > > > > +                       dev_err(chip->dev, "Get flash-max-
> > > > > > timeout-
> > > > > > us > failed, rc=%d\n", rc);
> > > > > > +                       returnrc;
> > > > > > +               }
> > > > > > +
> > > > > > +               val = min_t(u32, val,
> > > > > > FLASH_TIMEOUT_MAX_US);
> > > > > > +               s = &flash->timeout;
> > > > > > +               s->min = s->step = FLASH_TIMEOUT_STEP_US;
> > > > > > +               s->val = s->max = val;
> > > > > > +               led->max_timeout_ms = led->flash_timeout_ms
> > > > > > =
> > > > > > val /
> > > > > > > 1000;
> > > > > > +
> > > > > > +               flash->ops = &qcom_flash_ops;
> > > > > > +       }
> > > > > > +
> > > > > > +       flash->led_cdev.brightness_set_blocking = >
> > > > > > qcom_flash_led_brightness_set;
> > > > > > +       init_data.fwnode = node;
> > > > > > +       init_data.devicename = NULL;
> > > > > > +       init_data.default_label = NULL;
> > > > > > +       init_data.devname_mandatory = false;
> > > > > > +       rc = devm_led_classdev_flash_register_ext(parent,
> > > > > > flash, >
> > > > > > &init_data);
> > > > > > +       if (rc < 0) {
> > > > > > +               dev_err(chip->dev, "Register flash LED
> > > > > > classdev
> > > > > > > 
> > > > > > failed, rc=%d\n", rc);
> > > > > > +               return rc;
> > > > > > +       }
> > > > > > +
> > > > > > +       return qcom_flash_v4l2_init(led, node);
> > > > > > +}
> > > > > > +
> > > > > > +static int qcom_flash_led_probe(struct platform_device
> > > > > > *pdev)
> > > > > > +{
> > > > > > +       struct qcom_flash_chip *chip;
> > > > > > +       struct qcom_flash_led *led;
> > > > > > +       struct fwnode_handle *child;
> > > > > > +       struct device *dev = &pdev->dev;
> > > > > > +       struct regmap *map;
> > > > > > +       struct reg_field *regs;
> > > > > > +       int count, i, rc;
> > > > > > +       u32 val, reg_base;
> > > > > > +
> > > > > > +       chip = devm_kzalloc(dev, sizeof(*chip),
> > > > > > GFP_KERNEL);
> > > > > > +       if (!chip)
> > > > > > +               return -ENOMEM;
> > > > > > +
> > > > > > +       map = dev_get_regmap(dev->parent, NULL);
> > > > > > +       if (!map) {
> > > > > > +               dev_err(dev, "Failed to get parent
> > > > > > regmap\n");
> > > > > > +               return -EINVAL;
> > > > > > +       }
> > > > > > +
> > > > > > +       rc = fwnode_property_read_u32(dev->fwnode, "reg",
> > > > > > &reg_base);
> > > > > > +       if (rc < 0) {
> > > > > > +               dev_err(dev, "Failed to get register base
> > > > > > address,
> > > > > > > rc=%d\n", rc);
> > > > > > +               return rc;
> > > > > > +       }
> > > > > > +
> > > > > > +       rc = regmap_read(map, reg_base + FLASH_TYPE_REG,
> > > > > > &val);
> > > > > > +       if (rc < 0) {
> > > > > > +               dev_err(dev, "Read flash module type
> > > > > > failed, >
> > > > > > rc=%d\n", rc);
> > > > > > +               return rc;
> > > > > > +       }
> > > > > > +
> > > > > > +       if (val != FLASH_TYPE_VAL){
> > > > > > +               dev_err(dev, "type %#x is not a flash
> > > > > > module\n", >
> > > > > > val);
> > > > > > +               return -ENODEV;
> > > > > > +       }
> > > > > > +
> > > > > > +       rc = regmap_read(map, reg_base + FLASH_SUBTYPE_REG,
> > > > > > &val);
> > > > > > +       if (rc < 0) {
> > > > > > +               dev_err(dev, "Read flash module subtype
> > > > > > failed,
> > > > > > > 
> > > > > > rc=%d\n", rc);
> > > > > > +               return rc;
> > > > > > +       }
> > > > > > +
> > > > > > +       if (val == FLASH_SUBTYPE_3CH_VAL) {
> > > > > > +               chip->hw_type = QCOM_MVFLASH_3CH;
> > > > > > +               chip->max_channels = 3;
> > > > > > +               regs = mvflash_3ch_regs;
> > > > > > +       } else if (val == FLASH_SUBTYPE_4CH_VAL) {
> > > > > > +               chip->hw_type = QCOM_MVFLASH_4CH;
> > > > > > +               chip->max_channels = 4;
> > > > > > +               regs = mvflash_4ch_regs;
> > > > > > +       } else {
> > > > > > +               dev_err(dev, "flash subtype %#x is not yet
> > > > > > >
> > > > > > supported\n", val);
> > > > > > +               return -ENODEV;
> > > > > > +       }
> > > > > > +
> > > > > > +       for (i = 0; i < REG_MAX_COUNT; i++)
> > > > > > +               regs[i].reg += reg_base;
> > > > > > +
> > > > > > +       rc = devm_regmap_field_bulk_alloc(dev, map, chip-
> > > > > > > r_fields,
> > > > > > > regs, REG_MAX_COUNT);
> > > > > > +       if (rc < 0) {
> > > > > > +               dev_err(dev, "failed to alloc regmap filed,
> > > > > > rc=%d\n", > rc);
> > > > > > +               return rc;
> > > > > > +       }
> > > > > > +
> > > > > > +       chip->dev = dev;
> > > > > > +       platform_set_drvdata(pdev, chip);
> > > > > > +       mutex_init(&chip->lock);
> > > > > > +       count = device_get_child_node_count(dev);
> > > > > > +       if (count == 0 || count > chip->max_channels) {
> > > > > > +               dev_err(dev, "No child or child count
> > > > > > exceeds
> > > > > > %d\n", > chip->max_channels);
> > > > > > +               return -EINVAL;
> > > > > > +       }
> > > > > > +
> > > > > > +       chip->leds = devm_kcalloc(dev, count, sizeof(*chip-
> > > > > > > leds),
> > > > > > > GFP_KERNEL);
> > > > > > +       if (!chip->leds)
> > > > > > +               return -ENOMEM;
> > > > > > +
> > > > > > +       device_for_each_child_node(dev, child) {
> > > > > > +               led = &chip->leds[chip->leds_count];
> > > > > > +               led->chip = chip;
> > > > > > +               rc = qcom_flash_register_led_device(dev,
> > > > > > child,
> > > > > > led);
> > > > > > +               if (rc < 0)
> > > > > > +                       goto release;
> > > > > > +
> > > > > > +               chip->leds_count++;
> > > > > > +       }
> > > > > > +
> > > > > > +       return 0;
> > > > > > +release:
> > > > > > +       while (chip->leds && chip->leds_count--)
> > > > > > +               v4l2_flash_release(chip->leds[chip-
> > > > > > > leds_count].v4l2_> flash);
> > > > > > +       return rc;
> > > > > > +}
> > > > > > +
> > > > > > +static int qcom_flash_led_remove(struct platform_device
> > > > > > *pdev)
> > > > > > +{
> > > > > > +       struct qcom_flash_chip *chip=
> > > > > > platform_get_drvdata(pdev);
> > > > > > +
> > > > > > +       while (chip->leds_count--)
> > > > > > +               v4l2_flash_release(chip->leds[chip-
> > > > > > > leds_count].v4l2_> flash);
> > > > > > +
> > > > > > +       mutex_destroy(&chip->lock);
> > > > > > +       return 0;
> > > > > > +}
> > > > > > +
> > > > > > +static const struct of_device_id
> > > > > > qcom_flash_led_match_table[]
> > > > > > = {
> > > > > > +       { .compatible = "qcom,spmi-flash-led" },
> > > > > > +       { }
> > > > > > +};
> > > > > > +
> > > > > > +static struct platform_driver qcom_flash_led_driver = {
> > > > > > +       .driver = {
> > > > > > +               .name = "leds-qcom-flash",
> > > > > > +               .of_match_table =
> > > > > > qcom_flash_led_match_table,
> > > > > > +       },
> > > > > > +       .probe = qcom_flash_led_probe,
> > > > > > +       .remove = qcom_flash_led_remove,
> > > > > > +};
> > > > > > +
> > > > > > +module_platform_driver(qcom_flash_led_driver);
> > > > > > +
> > > > > > +MODULE_DESCRIPTION("QCOM Flash LED driver");
> > > > > > +MODULE_LICENSE("GPL");
> > > > 
> > > > Kind regards,
> > > > Dylan Van Assche
> > 
> > Kind regards,
> > Dylan Van Assche
> > 

Kind regards,
Dylan Van Assche
  
Fenglin Wu Nov. 2, 2022, 8:22 a.m. UTC | #8
Hi Dylan,

On 2022/11/2 16:14, Dylan Van Assche wrote:
> 
> Hi Fenglin,
> 
>> Hi Dylan,
>>
>>
>> On 2022/11/2 1:39, Dylan Van Assche wrote:
>>>
>>> Hi Fenglin,
>>>
>>>> On 2022/10/31 18:34, Dylan Van Assche wrote:
>>>>>
>>>>> Hi Fenglin,
>>>>>
>>>>> Thanks for submitting these patches! They are really nice!
>>>>> I tested these patches on an SDM845 based device as the
>>>>> downstream
>>>>> driver is the same for the PMI8998 compared to the mentioned
>>>>> PMICs
>>>>> in
>>>>> this patchseries.
>>>>>
>>>>> Tested-by: Dylan Van Assche <me@dylanvanassche.be> # sdm845-
>>>>> shift-
>>>>> axolotl + pmi8998
>>>>>
>>>> Thanks for testing the patch at your side, Dylan!
>>>>
>>>>>>> Add initial driver to support flash LED module found in
>>>>>>> Qualcomm
>>>>>>> Technologies, Inc. PMICs. The flash module can have 3 or 4
>>>>>>> channels
>>>>>>> and each channel can be controlled indepedently and support
>>>>>>> full >
>>>>>>> scale
>>>>>>> current up to 1.5 A. It also supports connecting two
>>>>>>> channels >
>>>>>>> together
>>>>>>> to supply one LED component with full scale current up to 2
>>>>>>> A.
>>>>>>> In >
>>>>>>> that
>>>>>>> case, the current will be split on each channel
>>>>>>> symmetrically
>>>>>>> and
>>>>>>> the
>>>>>>> channels will be enabled and disabled at the same time.
>>>>>>>
>>>>>>> Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
>>>>>>> Tested-by: Luca Weiss <luca.weiss@fairphone.com> # >
>>>>>>> sm7225-
>>>>>>> fairphone-fp4 + pm6150l
>>>>>>> ---
>>>>>>>     drivers/leds/flash/Kconfig           |  15 +
>>>>>>>     drivers/leds/flash/Makefile          |   1 +
>>>>>>>     drivers/leds/flash/leds-qcom-flash.c | 700 >
>>>>>>> +++++++++++++++++++++++++++
>>>>>>>     3 files changed, 716 insertions(+)
>>>>>>>     create mode 100644 drivers/leds/flash/leds-qcom-flash.c
>>>>>>>
>>>>>>> diff --git a/drivers/leds/flash/Kconfig
>>>>>>> b/drivers/leds/flash/Kconfig
>>>>>>> index d3eb689b193c..f36a60409290 100644
>>>>>>> --- a/drivers/leds/flash/Kconfig
>>>>>>> +++ b/drivers/leds/flash/Kconfig
>>>>>>> @@ -61,6 +61,21 @@ config LEDS_MT6360
>>>>>>>              Independent current sources supply for each
>>>>>>> flash
>>>>>>> LED >
>>>>>>> support torch
>>>>>>>              and strobe mode.
>>>>>>>     
>>>>>>> +config LEDS_QCOM_FLASH
>>>>>>> +       tristate "LED support for flash module inside
>>>>>>> Qualcomm
>>>>>>>>
>>>>>>> Technologies, Inc. PMIC"
>>>>>>> +       depends on MFD_SPMI_PMIC || COMPILE_TEST
>>>>>>> +       depends on LEDS_CLASS && OF
>>>>>>> +       depends on V4L2_FLASH_LED_CLASS ||
>>>>>>> !V4L2_FLASH_LED_CLASS
>>>>>>> +       select REGMAP
>>>>>>> +       help
>>>>>>> +         This option enables support for the flash module
>>>>>>> found in
>>>>>>>> Qualcomm
>>>>>>> +         Technologies, Inc. PMICs. The flash module can
>>>>>>> have 3
>>>>>>> or
>>>>>>> 4 > flash LED
>>>>>>> +         channels and each channel is programmable to
>>>>>>> support
>>>>>>> up
>>>>>>> to > 1.5 A full
>>>>>>> +         scale current. It also supports connecting two
>>>>>>> channels'
>>>>>>>> output together
>>>>>>> +         to supply one LED component to achieve current up
>>>>>>> to
>>>>>>> 2 A.
>>>>>>>> In such case,
>>>>>>> +         the total LED currentwill be split symmetrically
>>>>>>> on
>>>>>>> each
>>>>>>>> channel and
>>>>>>> +         they will be enabled/disabled at the same time.
>>>>>>> +
>>>>>>>     config LEDS_RT4505
>>>>>>>            tristate "LED support for RT4505 flashlight
>>>>>>> controller"
>>>>>>>            depends on I2C && OF
>>>>>>> diff --git a/drivers/leds/flash/Makefile >
>>>>>>> b/drivers/leds/flash/Makefile
>>>>>>> index 0acbddc0b91b..8a60993f1a25 100644
>>>>>>> --- a/drivers/leds/flash/Makefile
>>>>>>> +++ b/drivers/leds/flash/Makefile
>>>>>>> @@ -6,6 +6,7 @@ obj-$(CONFIG_LEDS_AS3645A)      += leds-
>>>>>>> as3645a.o
>>>>>>>     obj-$(CONFIG_LEDS_KTD2692)     += leds-ktd2692.o
>>>>>>>     obj-$(CONFIG_LEDS_LM3601X)     += leds-lm3601x.o
>>>>>>>     obj-$(CONFIG_LEDS_MAX77693)    += leds-max77693.o
>>>>>>> +obj-$(CONFIG_LEDS_QCOM_FLASH)  += leds-qcom-flash.o
>>>>>>>     obj-$(CONFIG_LEDS_RT4505)      += leds-rt4505.o
>>>>>>>     obj-$(CONFIG_LEDS_RT8515)      += leds-rt8515.o
>>>>>>>     obj-$(CONFIG_LEDS_SGM3140)     += leds-sgm3140.o
>>>>>>> diff --git a/drivers/leds/flash/leds-qcom-flash.c >
>>>>>>> b/drivers/leds/flash/leds-qcom-flash.c
>>>>>>> new file mode 100644
>>>>>>> index 000000000000..a9fcf61600c3
>>>>>>> --- /dev/null
>>>>>>> +++ b/drivers/leds/flash/leds-qcom-flash.c
>>>>>>> @@ -0,0 +1,700 @@
>>>>>>> +// SPDX-License-Identifier: GPL-2.0-only
>>>>>>> +/*
>>>>>>> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All
>>>>>>> rights
>>>>>>>> reserved.
>>>>>>> + */
>>>>>>> +
>>>>>>> +#include <linux/bitfield.h>
>>>>>>> +#include <linux/bits.h>
>>>>>>> +#include <linux/leds.h>
>>>>>>> +#include <linux/led-class-flash.h>
>>>>>>> +#include <linux/module.h>
>>>>>>> +#include <linux/platform_device.h>
>>>>>>> +#include <linux/property.h>
>>>>>>> +#include <linux/regmap.h>
>>>>>>> +#include <media/v4l2-flash-led-class.h>
>>>>>>> +
>>>>>>> +/* registers definitions */
>>>>>>> +#define FLASH_TYPE_REG                 0x04
>>>>>>> +#define FLASH_TYPE_VAL                 0x18
>>>>>>> +
>>>>>>> +#define FLASH_SUBTYPE_REG              0x05
>>>>>>> +#define FLASH_SUBTYPE_3CH_VAL          0x04
>>>>>
>>>>> PMI8998 has also a 3 channel flash subtype, but reports 0x03 as
>>>>> subtype. The driver won't probe because of this since the
>>>>> subtype
>>>>> did
>>>>> not match. Changing this value to 0x03 made this driver work on
>>>>> SDM845
>>>>> based device as well with PMI8998. Would you consider
>>>>> supporting
>>>>> SDM845+PMI8998 as well?
>>>>>
>>>> I just double checked, flash module in PMI8998 (with subtype 0x3)
>>>> has
>>>> very similar register definition as the flash module in PM8150C
>>>> (with
>>>> subtype 0x4) that the driver is intended to support, it's good
>>>> know
>>>> that
>>>> it's 99% work.
>>>> I can add the 0x3 subtype support but the only problem is I
>>>> couldn't
>>>> find a device with PMI8998 to test it out. Would it be good if I
>>>> add
>>>> the
>>>> support and rely on your test result?
>>>
>>> Sure! I already have a branch locally to test your patches, happy
>>> to
>>> help! I have an SDM845 device here with PMI8998 with 2 LEDs: cold
>>> and
>>> warm white.
>>>
>> Thank you for the help!
>>>>
>>>>>>> +#define FLASH_SUBTYPE_4CH_VAL          0x07
>>>>>>> +
>>>>>>> +#define FLASH_TIMER_EN_BIT             BIT(7)
>>>>>>> +#define FLASH_TIMER_VAL_MASK           GENMASK(6, 0)
>>>>>>> +#define FLASH_TIMER_STEP_MS            10
>>>>>>> +
>>>>>>> +#define FLASH_STROBE_HW_SW_SEL_BIT     BIT(2)
>>>>>>> +#define SW_STROBE_VAL                  0
>>>>>>> +#define HW_STROBE_VAL                  1
>>>>>>> +#define FLASH_HW_STROBE_TRIGGER_SEL_BIT        BIT(1)
>>>>>>> +#define STROBE_LEVEL_TRIGGER_VAL       0
>>>>>>> +#define STROBE_EDGE_TRIGGER_VAL                1
>>>>>>> +#define FLASH_STROBE_POLARITY_BIT      BIT(0)
>>>>>>> +#define STROBE_ACTIVE_HIGH_VAL         1
>>>>>>> +
>>>>>>> +#define FLASH_IRES_MASK_4CH            BIT(0)
>>>>>>> +#define FLASH_IRES_MASK_3CH            GENMASK(1, 0)
>>>>>>> +#define FLASH_IRES_12P5MA_VAL          0
>>>>>>> +#define FLASH_IRES_5MA_VAL_4CH         1
>>>>>>> +#define FLASH_IRES_5MA_VAL_3CH         3
>>>>>>> +
>>>>>>> +/* constants */
>>>>>>> +#define FLASH_CURRENT_MAX_UA           1500000
>>>>>>> +#define TORCH_CURRENT_MAX_UA           500000
>>>>>>> +#define FLASH_TOTAL_CURRENT_MAX_UA     2000000
>>>>>>> +#define FLASH_CURRENT_DEFAULT_UA       1000000
>>>>>>> +#define TORCH_CURRENT_DEFAULT_UA       200000
>>>>>>> +
>>>>>>> +#define TORCH_IRES_UA                  5000
>>>>>>> +#define FLASH_IRES_UA                  12500
>>>>>>> +
>>>>>>> +#define FLASH_TIMEOUT_MAX_US           1280000
>>>>>>> +#define FLASH_TIMEOUT_STEP_US          10000
>>>>>>> +
>>>>>>> +enum hw_type {
>>>>>>> +       QCOM_MVFLASH_3CH,
>>>>>>> +       QCOM_MVFLASH_4CH,
>>>>>>> +};
>>>>>>> +
>>>>>>> +enum led_mode {
>>>>>>> +       FLASH_MODE,
>>>>>>> +       TORCH_MODE,
>>>>>>> +};
>>>>>>> +
>>>>>>> +enum led_strobe {
>>>>>>> +       SW_STROBE,
>>>>>>> +       HW_STROBE,
>>>>>>> +};
>>>>>>> +
>>>>>>> +enum {
>>>>>>> +       REG_STATUS1,
>>>>>>> +       REG_STATUS2,
>>>>>>> +       REG_STATUS3,
>>>>>>> +       REG_CHAN_TIMER,
>>>>>>> +       REG_ITARGET,
>>>>>>> +       REG_MODULE_EN,
>>>>>>> +       REG_IRESOLUTION,
>>>>>>> +       REG_CHAN_STROBE,
>>>>>>> +       REG_CHAN_EN,
>>>>>>> +       REG_MAX_COUNT,
>>>>>>> +};
>>>>>>> +
>>>>>>> +struct reg_field mvflash_3ch_regs[REG_MAX_COUNT] = {
>>>>>>> +       REG_FIELD(0x08, 0, 7),                  /*
>>>>>>> status1      */
>>>>>>> +       REG_FIELD(0x09, 0, 7),                  /*
>>>>>>> status2      */
>>>>>>> +       REG_FIELD(0x0a, 0, 7),                  /*
>>>>>>> status3      */
>>>>>>> +       REG_FIELD_ID(0x40, 0, 7, 3, 1),         /*
>>>>>>> chan_timer   */
>>>>>>> +       REG_FIELD_ID(0x43, 0, 6, 3, 1),         /*
>>>>>>> itarget      */
>>>>>>> +       REG_FIELD(0x46, 7, 7),                  /*
>>>>>>> module_en    */
>>>>>>> +       REG_FIELD(0x47, 0, 5),                  /*
>>>>>>> iresolution  */
>>>>>>> +       REG_FIELD_ID(0x49, 0, 2, 3, 1),         /*
>>>>>>> chan_strobe  */
>>>>>>> +       REG_FIELD(0x4c, 0, 2),                  /*
>>>>>>> chan_en      */
>>>>>>> +};
>>>>>
>>>>> These registers map perfectly for SDM845 with PMI8998 as well,
>>>>> adding
>>>>> support for this subtype (0x03) would be great.
>>>>>
>>>>>>> +
>>>>>>> +struct reg_field mvflash_4ch_regs[REG_MAX_COUNT] = {
>>>>>>> +       REG_FIELD(0x06, 0, 7),                  /*
>>>>>>> status1      */
>>>>>>> +       REG_FIELD(0x07, 0, 6),                  /*
>>>>>>> status2      */
>>>>>>> +       REG_FIELD(0x09, 0, 7),                  /*
>>>>>>> status3      */
>>>>>>> +       REG_FIELD_ID(0x3e, 0, 7, 4, 1),         /*
>>>>>>> chan_timer   */
>>>>>>> +       REG_FIELD_ID(0x42, 0, 6, 4, 1),         /*
>>>>>>> itarget      */
>>>>>>> +       REG_FIELD(0x46, 7, 7),                  /*
>>>>>>> module_en    */
>>>>>>> +       REG_FIELD(0x49, 0, 3),                  /*
>>>>>>> iresolution  */
>>>>>>> +       REG_FIELD_ID(0x4a, 0, 6, 4, 1),         /*
>>>>>>> chan_strobe  */
>>>>>>> +       REG_FIELD(0x4e, 0, 3),                  /*
>>>>>>> chan_en      */
>>>>>>> +};
>>>>>>> +
>>>>>>> +struct qcom_flash_led {
>>>>>>> +       struct qcom_flash_chip          *chip;
>>>>>>> +       struct led_classdev_flash       flash;
>>>>>>> +       struct v4l2_flash               *v4l2_flash;
>>>>>>> +       u32                             max_flash_current_m
>>>>>>> a;
>>>>>>> +       u32                             max_torch_current_m
>>>>>>> a;
>>>>>>> +       u32                             max_timeout_ms;
>>>>>>> +       u32                             flash_current_ma;
>>>>>>> +       u32                             flash_timeout_ms;
>>>>>>> +       u8                              *chan_id;
>>>>>>> +       u8                              chan_count;
>>>>>>> +       bool                            enabled;
>>>>>>> +};
>>>>>>> +
>>>>>>> +struct qcom_flash_chip {
>>>>>>> +       struct qcom_flash_led   *leds;
>>>>>>> +       struct regmap_field     *r_fields[REG_MAX_COUNT];
>>>>>>> +       struct device           *dev;
>>>>>>> +       struct mutex            lock;
>>>>>>> +       enum hw_type            hw_type;
>>>>>>> +       u8                      leds_count;
>>>>>>> +       u8                      max_channels;
>>>>>>> +       u8                      chan_en_bits;
>>>>>>> +};
>>>>>>> +
>>>>>>> +static int set_flash_module_en(struct qcom_flash_led *led,
>>>>>>> bool
>>>>>>> en)
>>>>>>> +{
>>>>>>> +       struct qcom_flash_chip *chip= led->chip;
>>>>>>> +       u8 led_mask = 0, val;
>>>>>>> +       int i, rc;
>>>>>>> +
>>>>>>> +       for (i = 0; i < led->chan_count; i++)
>>>>>>> +               led_mask |= BIT(led->chan_id[i] - 1);
>>>>>>> +
>>>>>>> +       mutex_lock(&chip->lock);
>>>>>>> +       if (en)
>>>>>>> +               chip->chan_en_bits |= led_mask;
>>>>>>> +       else
>>>>>>> +               chip->chan_en_bits &= ~led_mask;
>>>>>>> +
>>>>>>> +       val = !!chip->chan_en_bits;
>>>>>>> +       rc = regmap_field_write(chip-
>>>>>>>> r_fields[REG_MODULE_EN],
>>>>>>> val);
>>>>>>> +       if (rc < 0)
>>>>>>> +               dev_err(chip->dev, "write module_en failed,
>>>>>>> rc=%d\n", > rc);
>>>>>>> +       mutex_unlock(&chip->lock);
>>>>>>> +
>>>>>>> +       return rc;
>>>>>>> +}
>>>>>>> +
>>>>>>> +static int set_flash_current(struct qcom_flash_led *led,
>>>>>>> u32 >
>>>>>>> current_ma, enum led_mode mode)
>>>>>>> +{
>>>>>>> +       struct qcom_flash_chip *chip= led->chip;
>>>>>>> +       u32 itarg_ua = current_ma * 1000 / led->chan_count
>>>>>>> + 1;
>>>>>>> +       u32 ires_ua = (mode ==FLASH_MODE) ? FLASH_IRES_UA :
>>>>>>>>
>>>>>>> TORCH_IRES_UA;
>>>>>>> +       u8 val, shift, ires_mask =0, ires_val = 0, chan_id;
>>>>>>> +       int i, rc;
>>>>>>> +
>>>>>>> +       /*
>>>>>>> +        * Split the current across the channels and set
>>>>>>> the
>>>>>>> +        * IRESOLUTION and ITARGET registers accordingly.
>>>>>>> +        */
>>>>>>> +       for (i = 0; i < led->chan_count; i++) {
>>>>>>> +               chan_id = led->chan_id[i];
>>>>>>> +               if (itarg_ua < ires_ua)
>>>>>>> +                       val = 0;
>>>>>>> +               else
>>>>>>> +                       val = itarg_ua / ires_ua - 1;
>>>>>>> +
>>>>>>> +               rc = regmap_fields_write(chip-
>>>>>>>> r_fields[REG_ITARGET], > chan_id - 1, val);
>>>>>>> +               if (rc < 0)
>>>>>>> +                       returnrc;
>>>>>>> +
>>>>>>> +               if (chip->hw_type == QCOM_MVFLASH_3CH) {
>>>>>>> +                       shift = (chan_id - 1) * 2;
>>>>>>> +                       ires_mask |= FLASH_IRES_MASK_3CH <<
>>>>>>> shift;
>>>>>>> +                       ires_val |= ((mode == FLASH_MODE) ?
>>>>>>> +                               (FLASH_IRES_12P5MA_VAL <<
>>>>>>> shift) :
>>>>>>> +                               (FLASH_IRES_5MA_VAL_3CH <<
>>>>>>> shift));
>>>>>>> +               } else if (chip->hw_type ==
>>>>>>> QCOM_MVFLASH_4CH) {
>>>>>>> +                       shift = chan_id - 1;
>>>>>>> +                       ires_mask |= FLASH_IRES_MASK_4CH <<
>>>>>>> shift;
>>>>>>> +                       ires_val |= ((mode == FLASH_MODE) ?
>>>>>>> +                               (FLASH_IRES_12P5MA_VAL <<
>>>>>>> shift) :
>>>>>>> +                               (FLASH_IRES_5MA_VAL_4CH <<
>>>>>>> shift));
>>>>>>> +               }
>>>>>>> +       }
>>>>>>> +
>>>>>>> +       return > regmap_field_update_bits(chip-
>>>>>>>> r_fields[REG_IRESOLUTION], ires_mask, > ires_val);
>>>>>>> +}
>>>>>>> +
>>>>>>> +static int set_flash_timeout(struct qcom_flash_led *led,
>>>>>>> u32 >
>>>>>>> timeout_ms)
>>>>>>> +{
>>>>>>> +       struct qcom_flash_chip *chip= led->chip;
>>>>>>> +       u8 val, chan_id;
>>>>>>> +       int rc, i;
>>>>>>> +
>>>>>>> +       /* set SAFETY_TIMER for all the channels connected
>>>>>>> to
>>>>>>> the >
>>>>>>> same LED */
>>>>>>> +       timeout_ms = min_t(u32, timeout_ms, led-
>>>>>>>> max_timeout_ms);
>>>>>>> +       for (i = 0; i < led->chan_count; i++) {
>>>>>>> +               chan_id = led->chan_id[i];
>>>>>>> +               val = timeout_ms / FLASH_TIMER_STEP_MS;
>>>>>>> +               val = clamp_t(u8, val, 0,
>>>>>>> FLASH_TIMER_VAL_MASK);
>>>>>>> +               if (timeout_ms)
>>>>>>> +                       val |= FLASH_TIMER_EN_BIT;
>>>>>>> +
>>>>>>> +               rc = > regmap_fields_write(chip-
>>>>>>>> r_fields[REG_CHAN_TIMER], chan_id - 1, > val);
>>>>>>> +               if (rc < 0)
>>>>>>> +                       returnrc;
>>>>>>> +       }
>>>>>>> +
>>>>>>> +       return 0;
>>>>>>> +}
>>>>>>> +
>>>>>>> +static int set_flash_strobe(struct qcom_flash_led *led,
>>>>>>> enum >
>>>>>>> led_strobe strobe, bool state)
>>>>>>> +{
>>>>>>> +       struct qcom_flash_chip *chip= led->chip;
>>>>>>> +       u8 mask, val, chan_id = 0,chan_mask = 0;
>>>>>>> +       int rc, i;
>>>>>>> +
>>>>>>> +       /* Set SW strobe config for all channels connected
>>>>>>> to
>>>>>>> the
>>>>>>> LED > */
>>>>>>> +       for (i = 0; i < led->chan_count; i++) {
>>>>>>> +               chan_id = led->chan_id[i];
>>>>>>> +               if (strobe == SW_STROBE)
>>>>>>> +                       val =
>>>>>>> FIELD_PREP(FLASH_STROBE_HW_SW_SEL_BIT, > SW_STROBE_VAL);
>>>>>>> +               else
>>>>>>> +                       val =
>>>>>>> FIELD_PREP(FLASH_STROBE_HW_SW_SEL_BIT, > HW_STROBE_VAL);
>>>>>>> +
>>>>>>> +               val |=
>>>>>>> FIELD_PREP(FLASH_HW_STROBE_TRIGGER_SEL_BIT,
>>>>>>>> STROBE_LEVEL_TRIGGER_VAL) |
>>>>>>> +                       FIELD_PREP(FLASH_STROBE_POLARITY_BI
>>>>>>> T, >
>>>>>>> STROBE_ACTIVE_HIGH_VAL);
>>>>>>> +               rc = > regmap_fields_write(chip-
>>>>>>>> r_fields[REG_CHAN_STROBE], chan_id - 1, > val);
>>>>>>> +               if (rc < 0)
>>>>>>> +                       returnrc;
>>>>>>> +
>>>>>>> +               chan_mask |= BIT(chan_id - 1);
>>>>>>> +       }
>>>>>>> +
>>>>>>> +       /* enable/disable flash channels */
>>>>>>> +       mask = chan_mask;
>>>>>>> +       val = state ? mask : 0;
>>>>>>> +       rc = regmap_field_update_bits(chip-
>>>>>>>> r_fields[REG_CHAN_EN],
>>>>>>>> mask, val);
>>>>>>> +       if (rc < 0)
>>>>>>> +               return rc;
>>>>>>> +
>>>>>>> +       led->enabled = state;
>>>>>>> +       return 0;
>>>>>>> +}
>>>>>>> +
>>>>>>> +static int qcom_flash_brightness_set(struct
>>>>>>> led_classdev_flash
>>>>>>>>
>>>>>>> *fled_cdev, u32 brightness)
>>>>>>> +{
>>>>>>> +       struct qcom_flash_led *led =
>>>>>>> container_of(fled_cdev,
>>>>>>> struct
>>>>>>>> qcom_flash_led, flash);
>>>>>>> +
>>>>>>> +       led->flash_current_ma = min_t(u32, led-
>>>>>>>> max_flash_current_ma, > brightness / 1000);
>>>>>>> +       return 0;
>>>>>>> +}
>>>>>
>>>>> This doesn't seem to work in torch mode for me on PMI8998. If
>>>>> the
>>>>> brightness is 0, the torch is OFF as expected, but when the
>>>>> torch
>>>>> is
>>>>> ON, you cannot control the brightness. The brightness is the
>>>>> same
>>>>> for
>>>>> [1, 255]. If the hardware cannot change the brightness in torch
>>>>> mode,
>>>>> it would be nice to report a max_brightness value of 1 instead
>>>>> of
>>>>> 255
>>>>> for userspace. This could be a limitation of the PMI8998, not
>>>>> sure.
>>>>> Do you have any insights here? This driver is already 99%
>>>>> working
>>>>> for
>>>>> SDM845+PMI8998.
>>>>>
>>>>> Flash mode works great, timeout & brightness can be configured
>>>>> just
>>>>> fine.
>>>>>
>>>>
>>>> Here, function qcom_flash_brightness_set() is used for setting
>>>> brightness in flash mode and it was supposed to be working with
>>>> following commands combination:
>>>>           echo xxx > flash_brightness
>>>>           echo 1 > flash_strobe  (you will need to toggle
>>>> flash_strobe
>>>> when you
>>>> enabling it again)
>>>>
>>>> Can you check if you can see the brightness change in flash mode
>>>> when
>>>> you updating the flash_brightness value with these commands?
>>>>
>>>> You can echo any value between [0, max_flash_brightness] into the
>>>> flash_brightness, there is a "max_flash_brightness" sysfs node
>>>> and
>>>> the
>>>> value comes from DT property "flash-max-microamp", ex. my dtsi
>>>> node
>>>> has
>>>> "flash-max-microamp = <2000000>;" defined so I am having
>>>> following
>>>> value
>>>> for max_flash_brightness:
>>>>
>>>> kalama:/sys/class/leds/white:flash-0 # cat max_flash_brightness
>>>> 2000000
>>>>
>>>> And by default flash mode uses 12500uA resolution so you won't
>>>> see
>>>> brightness change when you update it with values between [1,
>>>> 12500].
>>>
>>> Yes, this works perfectly fine on PMI8998. I can adjust the flash
>>> brightness and flash timeout perfectly.
>>>
>>>>
>>>> If you want to update the brightness for torch node, you can
>>>> directly
>>>> update the "brightness" node with values between [0, 255], and
>>>> it's
>>>> mapping to the torch current between [0, led-max-microamp].
>>>> "led-max-microamp" is also has value coming from the DT property.
>>>>
>>>> This worked at my side on both pm8150C and pm8550.I think it
>>>> should
>>>> work
>>>> on PMI8998 as well because the flash module in it is very similar
>>>> to
>>>> the
>>>> one in PM8150c. Let me know if you still see such issues at your
>>>> side.
>>>> Thanks
>>>
>>> Only here I have an issue with PMI8998: the "brightness" nodes
>>> should
>>> change the brightness of the torch, but it doesn't make a
>>> difference
>>> here. When I do:
>>>
>>> - echo 0 > brightness --> LED turns OFF
>>> - echo 255 > brightness --> LED turns ON
>>> - echo 100 > brightness --> LED is still ON, but brightness is the
>>> same
>>> as with 255.
>>>
>>> Could it be that PMI8998 is slightly different here than with
>>> PM8150c
>>> for example? Maybe it doesn't support brightness for torch?
>>>
>>> Here's my DTS:
>>>
>>> *PMI8998*
>>>
>>> pmi8998_flash: led-controller@d300 {
>>>          compatible = "qcom,pm6150l-flash-led", "qcom,spmi-flash-
>>> led";
>>>          reg = <0xd300>;
>>>          status = "disabled";
>>> };
>>>
>>> *SDM845 SHIFT axolotl*
>>>
>>> &pmi8998_flash {
>>>          status = "okay";
>>>
>>>          led-0 {
>>>                  function = LED_FUNCTION_FLASH;
>>>                  color = <LED_COLOR_ID_WHITE>;
>>>                  led-sources = <1>;
>>>                  led-max-microamp = <180000>;
>>>                  flash-max-microamp = <1000000>;
>>>                  flash-max-timeout-us = <1280000>;
>>>          };
>>>
>>>          led-1 {
>>>                  function = LED_FUNCTION_FLASH;
>>>                  color = <LED_COLOR_ID_YELLOW>;
>>>                  led-sources = <2>;
>>>                  led-max-microamp = <180000>;
>>>                  flash-max-microamp = <1000000>;
>>>                  flash-max-timeout-us = <1280000>;
>>>          };
>>> };
>>>
>> Thank you for getting back all the details. The devicetree node looks
>> good to me.
>>
>> I checked again and confirmed that the flash modules in PMI8998 and
>> PM8150C have the same register definition for ITARGETx (0xD343 + x)
>> and
>> IRESOLUTION (0xD347), these are the only 2 settings would impact LED
>> brightness, and in torch mode, IRESOLUTION is fixed to 5mA and only
>> ITARGET is updated accordingly.
>>
>> I updated my workspace to use the same current for torch mode as your
>> settings in devicetree and tried again on my PM8150C device,I could
>> notice the brightness change when echoing different values to the
>> brightness sysfs node, however, when I updating values between 255
>> and
>> 200, it wasn't a very noticeable brightness change with naked eys,
>> but I
>> could see the ITRAGETx register changed accordingly when reading its
>> value back from the regmap debugfs node.
>>
>> Can you try the same and see if the register got updated accordingly
>> when you updating brightness values? If yes, I would wonder if the
>> LED
>> component on your device has upper current limit in torch mode close
>> to
>> (100 / 255 ) * 180mA so you that you can't observe the brightness
>> change
>> when updating between 100 to 255. Another easier thing to try, can
>> you
>> echo a lower brightness value, such as 10, to see if you can notice
>> the
>> brightness change?
>>
> 
> Aha! It does seem to work partially!
> 
> I tried it with brightness 0 --> 255 --> 1. This order keeps the
> highest brightness at all times, matching 255. The other way around: 0
> --> 1 --> 255 keeps the lowest brightness, matching 1.
> Changing the brightness only works if the LED was turned OFF first:
> 
> 0 --> 255 --> 0 --> 1
> 0 --> 1 --> 0 --> 255
> 
> both work fine, verified it with the following shell commands (assumed
> that the LED was turned OFF to start):
> 
> echo 1 > brightness && sleep 3 && echo 0 > brightness && echo 255 >
> brightness
> echo 255 > brightness && sleep 3 &&  echo 0 > brightness && echo 1 >
> brightness
> 
> Maybe a register needs to be reset when the brightness changes?
> 
Thanks for the information, this is helpful! Let me check in the team 
internally and get back if any special sequence is required for the 
flash module inside PMI8998.

>>>
>>>>
>>>>>>> +
>>>>>>> +static int qcom_flash_timeout_set(struct
>>>>>>> led_classdev_flash >
>>>>>>> *fled_cdev, u32 timeout)
>>>>>>> +{
>>>>>>> +       struct qcom_flash_led *led =
>>>>>>> container_of(fled_cdev,
>>>>>>> struct
>>>>>>>> qcom_flash_led, flash);
>>>>>>> +
>>>>>>> +       led->flash_timeout_ms = timeout / 1000;
>>>>>>> +       return 0;
>>>>>>> +}
>>>>>>> +
>>>>>>> +static int qcom_flash_strobe_set(struct led_classdev_flash
>>>>>>>>
>>>>>>> *fled_cdev, bool state)
>>>>>>> +{
>>>>>>> +       struct qcom_flash_led *led =
>>>>>>> container_of(fled_cdev,
>>>>>>> struct
>>>>>>>> qcom_flash_led, flash);
>>>>>>> +       int rc;
>>>>>>> +
>>>>>>> +       rc = set_flash_current(led, led->flash_current_ma,
>>>>>>>>
>>>>>>> FLASH_MODE);
>>>>>>> +       if (rc < 0)
>>>>>>> +               return rc;
>>>>>>> +
>>>>>>> +       rc = set_flash_timeout(led, led->flash_timeout_ms);
>>>>>>> +       if (rc < 0)
>>>>>>> +               return rc;
>>>>>>> +
>>>>>>> +       rc = set_flash_module_en(led, state);
>>>>>>> +       if (rc < 0)
>>>>>>> +               return rc;
>>>>>>> +
>>>>>>> +       return set_flash_strobe(led,SW_STROBE, state);
>>>>>>> +}
>>>>>>> +
>>>>>>> +static int qcom_flash_strobe_get(struct led_classdev_flash
>>>>>>>>
>>>>>>> *fled_cdev, bool *state)
>>>>>>> +{
>>>>>>> +       struct qcom_flash_led *led =
>>>>>>> container_of(fled_cdev,
>>>>>>> struct
>>>>>>>> qcom_flash_led, flash);
>>>>>>> +
>>>>>>> +       *state = led->enabled;
>>>>>>> +       return 0;
>>>>>>> +}
>>>>>>> +
>>>>>>> +static int qcom_flash_fault_get(struct led_classdev_flash
>>>>>>>>
>>>>>>> *fled_cdev, u32 *fault)
>>>>>>> +{
>>>>>>> +       struct qcom_flash_led *led =
>>>>>>> container_of(fled_cdev,
>>>>>>> struct
>>>>>>>> qcom_flash_led, flash);
>>>>>>> +       struct qcom_flash_chip *chip= led->chip;
>>>>>>> +       u8 shift, chan_id = 0, chan_mask = 0;
>>>>>>> +       u8 ot_mask = 0, oc_mask = 0, uv_mask = 0;
>>>>>>> +       u32 val, fault_sts = 0;
>>>>>>> +       int i, rc;
>>>>>>> +
>>>>>>> +       rc = regmap_field_read(chip->r_fields[REG_STATUS1],
>>>>>>> &val);
>>>>>>> +       if (rc < 0)
>>>>>>> +               return rc;
>>>>>>> +
>>>>>>> +       for (i = 0; i < led->chan_count; i++) {
>>>>>>> +               chan_id = led->chan_id[i];
>>>>>>> +               shift = (chan_id - 1) * 2;
>>>>>>> +               if (val & BIT(shift))
>>>>>>> +                       fault_sts |=
>>>>>>> LED_FAULT_SHORT_CIRCUIT;
>>>>>>> +               chan_mask |= BIT(chan_id - 1);
>>>>>>> +       }
>>>>>>> +
>>>>>>> +       rc = regmap_field_read(chip->r_fields[REG_STATUS2],
>>>>>>> &val);
>>>>>>> +       if (rc < 0)
>>>>>>> +               return rc;
>>>>>>> +
>>>>>>> +       if (chip->hw_type == QCOM_MVFLASH_3CH) {
>>>>>>> +               ot_mask = 0x0f;
>>>>>>> +               oc_mask = 0xe0;
>>>>>>> +               uv_mask = 0x10;
>>>>>>> +       } else if (chip->hw_type == QCOM_MVFLASH_4CH) {
>>>>>>> +               ot_mask = 0x70;
>>>>>>> +               oc_mask = 0x0e;
>>>>>>> +               uv_mask = 0x01;
>>>>>>> +       }
>>>>>>> +
>>>>>>> +       if (val & ot_mask)
>>>>>>> +               fault_sts |= LED_FAULT_OVER_TEMPERATURE;
>>>>>>> +       if (val & oc_mask)
>>>>>>> +               fault_sts |= LED_FAULT_OVER_CURRENT;
>>>>>>> +       if (val & uv_mask)
>>>>>>> +               fault_sts |= LED_FAULT_INPUT_VOLTAGE;
>>>>>>> +
>>>>>>> +       rc = regmap_field_read(chip->r_fields[REG_STATUS3],
>>>>>>> &val);
>>>>>>> +       if (rc < 0)
>>>>>>> +               return rc;
>>>>>>> +
>>>>>>> +       if (chip->hw_type == QCOM_MVFLASH_3CH) {
>>>>>>> +               if (val & chan_mask)
>>>>>>> +                       fault_sts |= LED_FAULT_TIMEOUT;
>>>>>>> +       } else if (chip->hw_type == QCOM_MVFLASH_4CH) {
>>>>>>> +               for (i = 0; i < led->chan_count; i++) {
>>>>>>> +                       chan_id = led->chan_id[i];
>>>>>>> +                       shift = (chan_id - 1) * 2;
>>>>>>> +                       if (val & BIT(shift))
>>>>>>> +                               fault_sts |=
>>>>>>> LED_FAULT_TIMEOUT;
>>>>>>> +               }
>>>>>>> +       }
>>>>>>> +
>>>>>>> +       *fault = fault_sts;
>>>>>>> +       return 0;
>>>>>>> +}
>>>>>>> +
>>>>>>> +static int qcom_flash_led_brightness_set(struct
>>>>>>> led_classdev >
>>>>>>> *led_cdev,
>>>>>>> +                                       enum led_brightness
>>>>>>>>
>>>>>>> brightness)
>>>>>>> +{
>>>>>>> +       struct led_classdev_flash *fled_cdev =
>>>>>>> +               container_of(led_cdev, struct
>>>>>>> led_classdev_flash, >
>>>>>>> led_cdev);
>>>>>>> +       struct qcom_flash_led *led =
>>>>>>> +               container_of(fled_cdev, struct
>>>>>>> qcom_flash_led,
>>>>>>>>
>>>>>>> flash);
>>>>>>> +       u32 current_ma = brightness * led-
>>>>>>>> max_torch_current_ma
>>>>>>> / >
>>>>>>> LED_FULL;
>>>>>>> +       bool enable = !!brightness;
>>>>>>> +       int rc;
>>>>>>> +
>>>>>>> +       rc = set_flash_current(led, current_ma,
>>>>>>> TORCH_MODE);
>>>>>>> +       if (rc < 0)
>>>>>>> +               return rc;
>>>>>>> +
>>>>>>> +       /* disable flash timeout fortorch LED */
>>>>>>> +       rc = set_flash_timeout(led, 0);
>>>>>>> +       if (rc < 0)
>>>>>>> +               return rc;
>>>>>>> +
>>>>>>> +       rc = set_flash_module_en(led, enable);
>>>>>>> +       if (rc < 0)
>>>>>>> +               return rc;
>>>>>>> +
>>>>>>> +       return set_flash_strobe(led,SW_STROBE, enable);
>>>>>>> +}
>>>>>>> +
>>>>>>> +static const struct led_flash_ops qcom_flash_ops = {
>>>>>>> +       .flash_brightness_set = qcom_flash_brightness_set,
>>>>>>> +       .strobe_set = qcom_flash_strobe_set,
>>>>>>> +       .strobe_get = qcom_flash_strobe_get,
>>>>>>> +       .timeout_set = qcom_flash_timeout_set,
>>>>>>> +       .fault_get = qcom_flash_fault_get,
>>>>>>> +};
>>>>>>> +
>>>>>>> +#if IS_ENABLED(CONFIG_V4L2_FLASH_LED_CLASS)
>>>>>>> +static int qcom_flash_external_strobe_set(struct
>>>>>>> v4l2_flash >
>>>>>>> *v4l2_flash, bool enable)
>>>>>>> +{
>>>>>>> +       struct led_classdev_flash *flash = v4l2_flash-
>>>>>>>> fled_cdev;
>>>>>>> +       struct qcom_flash_led *led = container_of(flash,
>>>>>>> struct
>>>>>>>>
>>>>>>> qcom_flash_led, flash);
>>>>>>> +       int rc;
>>>>>>> +
>>>>>>> +       rc = set_flash_module_en(led, enable);
>>>>>>> +       if (rc < 0)
>>>>>>> +               return rc;
>>>>>>> +
>>>>>>> +       if (enable)
>>>>>>> +               return set_flash_strobe(led, HW_STROBE,
>>>>>>> true);
>>>>>>> +       else
>>>>>>> +               return set_flash_strobe(led, SW_STROBE,
>>>>>>> false);
>>>>>>> +}
>>>>>>> +
>>>>>>> +static enum led_brightness
>>>>>>> qcom_flash_intensity_to_led_brightness(
>>>>>>> +               struct v4l2_flash *v4l2_flash, s32
>>>>>>> intensity)
>>>>>>> +{
>>>>>>> +       struct led_classdev_flash *flash = v4l2_flash-
>>>>>>>> fled_cdev;
>>>>>>> +       struct qcom_flash_led *led = container_of(flash,
>>>>>>> struct
>>>>>>>>
>>>>>>> qcom_flash_led, flash);
>>>>>>> +       u32 current_ma = intensity/ 1000;
>>>>>>> +
>>>>>>> +       current_ma = min_t(u32, current_ma, > led-
>>>>>>>> max_torch_current_ma);
>>>>>>> +       if (!current_ma)
>>>>>>> +               return LED_OFF;
>>>>>>> +
>>>>>>> +       return current_ma * LED_FULL/ led-
>>>>>>>> max_torch_current_ma;
>>>>>>> +}
>>>>>>> +
>>>>>>> +static s32 qcom_flash_brightness_to_led_intensity(struct
>>>>>>> v4l2_flash > *v4l2_flash,
>>>>>>> +                                       enum led_brightness
>>>>>>>>
>>>>>>> brightness)
>>>>>>> +{
>>>>>>> +       struct led_classdev_flash *flash = v4l2_flash-
>>>>>>>> fled_cdev;
>>>>>>> +       struct qcom_flash_led *led = container_of(flash,
>>>>>>> struct
>>>>>>>>
>>>>>>> qcom_flash_led, flash);
>>>>>>> +
>>>>>>> +       return (brightness * led->max_torch_current_ma *
>>>>>>> 1000)
>>>>>>> / >
>>>>>>> LED_FULL;
>>>>>>> +}
>>>>>>> +
>>>>>>> +static const struct v4l2_flash_ops qcom_v4l2_flash_ops = {
>>>>>>> +       .external_strobe_set =
>>>>>>> qcom_flash_external_strobe_set,
>>>>>>> +       .intensity_to_led_brightness= >
>>>>>>> qcom_flash_intensity_to_led_brightness,
>>>>>>> +       .led_brightness_to_intensity= >
>>>>>>> qcom_flash_brightness_to_led_intensity,
>>>>>>> +};
>>>>>>> +
>>>>>>> +static int qcom_flash_v4l2_init(struct qcom_flash_led
>>>>>>> *led,
>>>>>>> struct
>>>>>>>> fwnode_handle *fwnode)
>>>>>>> +{
>>>>>>> +       struct v4l2_flash_config v4l2_cfg = {0};
>>>>>>> +       struct led_flash_setting *s = &v4l2_cfg.intensity;
>>>>>>> +
>>>>>>> +       if (!(led->flash.led_cdev.flags &
>>>>>>> LED_DEV_CAP_FLASH))
>>>>>>> +               return 0;
>>>>>>> +
>>>>>>> +       s->min = s->step = TORCH_IRES_UA * led->chan_count;
>>>>>>> +       s->max = led->max_torch_current_ma * 1000;
>>>>>>> +       s->val = min_t(u32, s->max,
>>>>>>> TORCH_CURRENT_DEFAULT_UA);
>>>>>>> +
>>>>>>> +       strscpy(v4l2_cfg.dev_name, >led-
>>>>>>>> flash.led_cdev.dev-
>>>>>>>> kobj.name,
>>>>>>> +                                       sizeof(v4l2_cfg.dev
>>>>>>> _nam
>>>>>>> e));
>>>>>>> +       v4l2_cfg.has_external_strobe= 1;
>>>>>>> +       v4l2_cfg.flash_faults = LED_FAULT_INPUT_VOLTAGE | >
>>>>>>> LED_FAULT_OVER_CURRENT |
>>>>>>> +               LED_FAULT_SHORT_CIRCUIT |
>>>>>>> LED_FAULT_OVER_TEMPERATURE > | LED_FAULT_TIMEOUT;
>>>>>>> +
>>>>>>> +       led->v4l2_flash = v4l2_flash_init(led->chip->dev,
>>>>>>> fwnode, >
>>>>>>> &led->flash,
>>>>>>> +                                       &qcom_v4l2_flash_op
>>>>>>> s, >
>>>>>>> &v4l2_cfg);
>>>>>>> +       return PTR_ERR_OR_ZERO(led->v4l2_flash);
>>>>>>> +}
>>>>>>> +# else
>>>>>>> +static int qcom_flash_v4l2_init(struct qcom_flash_led
>>>>>>> *led,
>>>>>>> struct
>>>>>>>> fwnode_handle *fwnode)
>>>>>>> +{
>>>>>>> +       return 0;
>>>>>>> +}
>>>>>>> +#endif
>>>>>>> +
>>>>>>> +static int qcom_flash_register_led_device(struct device
>>>>>>> *parent,
>>>>>>> +               struct fwnode_handle *node, struct
>>>>>>> qcom_flash_led >
>>>>>>> *led)
>>>>>>> +{
>>>>>>> +       struct qcom_flash_chip *chip= led->chip;
>>>>>>> +       struct led_init_data init_data;
>>>>>>> +       struct led_classdev_flash *flash;
>>>>>>> +       struct led_flash_setting *s;
>>>>>>> +       u32 count, val;
>>>>>>> +       u32 channels[4];
>>>>>>> +       int i, rc;
>>>>>>> +
>>>>>>> +       flash = &led->flash;
>>>>>>> +       count = fwnode_property_count_u32(node, "led-
>>>>>>> sources");
>>>>>>> +       if (count <= 0) {
>>>>>>> +               dev_err(chip->dev, "No led-sources
>>>>>>> specified\n");
>>>>>>> +               return -ENODEV;
>>>>>>> +       }
>>>>>>> +
>>>>>>> +       if (count > chip->max_channels) {
>>>>>>> +               dev_err(chip->dev, "led-sources count %u
>>>>>>> exceeds >
>>>>>>> maximum channel count %u\n",
>>>>>>> +                               count, chip->max_channels);
>>>>>>> +               return -EINVAL;
>>>>>>> +       }
>>>>>>> +
>>>>>>> +       rc = fwnode_property_read_u32_array(node, "led-
>>>>>>> sources", >
>>>>>>> channels, count);
>>>>>>> +       if (rc < 0) {
>>>>>>> +               dev_err(chip->dev, "get led-sources failed,
>>>>>>> rc=%d\n", > rc);
>>>>>>> +               return rc;
>>>>>>> +       }
>>>>>>> +
>>>>>>> +       led->chan_count = count;
>>>>>>> +       led->chan_id = devm_kcalloc(chip->dev, count,
>>>>>>> sizeof(u8), >
>>>>>>> GFP_KERNEL);
>>>>>>> +       if (!led->chan_id)
>>>>>>> +               return -ENOMEM;
>>>>>>> +
>>>>>>> +       for (i = 0; i < count; i++) {
>>>>>>> +               if (channels[i] > chip->max_channels) {
>>>>>>> +                       dev_err(chip->dev, "led-source out
>>>>>>> of
>>>>>>> HW >
>>>>>>> support range [1-%u]\n",
>>>>>>> +                                       chip-
>>>>>>>> max_channels);
>>>>>>> +                       return-EINVAL;
>>>>>>> +               }
>>>>>>> +
>>>>>>> +               led->chan_id[i] = channels[i];
>>>>>>> +       }
>>>>>>> +
>>>>>>> +       rc = fwnode_property_read_u32(node, "led-max-
>>>>>>> microamp",
>>>>>>>>
>>>>>>> &val);
>>>>>>> +       if (rc < 0) {
>>>>>>> +               dev_err(chip->dev, "Get led-max-microamp
>>>>>>> failed, >
>>>>>>> rc=%d\n", rc);
>>>>>>> +               return rc;
>>>>>>> +       }
>>>>>>> +
>>>>>>> +       if (!val) {
>>>>>>> +               dev_err(chip->dev, "led-max-microamp
>>>>>>> shouldn't
>>>>>>> be >
>>>>>>> 0\n");
>>>>>>> +               return -EINVAL;
>>>>>>> +       }
>>>>>>> +
>>>>>>> +       val = min_t(u32, val, TORCH_CURRENT_MAX_UA * > led-
>>>>>>>> chan_count);
>>>>>>> +       led->max_torch_current_ma = val / 1000;
>>>>>>> +
>>>>>>> +       if (fwnode_property_present(node, "flash-max-
>>>>>>> microamp")) {
>>>>>>> +               flash->led_cdev.flags |= LED_DEV_CAP_FLASH;
>>>>>>> +               rc = fwnode_property_read_u32(node, >
>>>>>>> "flash-
>>>>>>> max-
>>>>>>> microamp", &val);
>>>>>>> +               if (rc < 0) {
>>>>>>> +                       dev_err(chip->dev, "Get flash-max-
>>>>>>> microamp
>>>>>>>> failed, rc=%d\n", rc);
>>>>>>> +                       returnrc;
>>>>>>> +               }
>>>>>>> +
>>>>>>> +               val = min_t(u32, val, FLASH_CURRENT_MAX_UA
>>>>>>> * >
>>>>>>> led-
>>>>>>>> chan_count);
>>>>>>> +               val = min_t(u32, val,
>>>>>>> FLASH_TOTAL_CURRENT_MAX_UA);
>>>>>>> +               s = &flash->brightness;
>>>>>>> +               s->min = s->step = FLASH_IRES_UA * led-
>>>>>>>> chan_count;
>>>>>>> +               s->max = val;
>>>>>>> +               s->val = min_t(u32, val,
>>>>>>> FLASH_CURRENT_DEFAULT_UA);
>>>>>>> +               led->max_flash_current_ma = val / 1000;
>>>>>>> +               led->flash_current_ma = s->val / 1000;
>>>>>>> +
>>>>>>> +               rc = fwnode_property_read_u32(node, >
>>>>>>> "flash-
>>>>>>> max-
>>>>>>> timeout-us", &val);
>>>>>>> +               if (rc < 0) {
>>>>>>> +                       dev_err(chip->dev, "Get flash-max-
>>>>>>> timeout-
>>>>>>> us > failed, rc=%d\n", rc);
>>>>>>> +                       returnrc;
>>>>>>> +               }
>>>>>>> +
>>>>>>> +               val = min_t(u32, val,
>>>>>>> FLASH_TIMEOUT_MAX_US);
>>>>>>> +               s = &flash->timeout;
>>>>>>> +               s->min = s->step = FLASH_TIMEOUT_STEP_US;
>>>>>>> +               s->val = s->max = val;
>>>>>>> +               led->max_timeout_ms = led->flash_timeout_ms
>>>>>>> =
>>>>>>> val /
>>>>>>>> 1000;
>>>>>>> +
>>>>>>> +               flash->ops = &qcom_flash_ops;
>>>>>>> +       }
>>>>>>> +
>>>>>>> +       flash->led_cdev.brightness_set_blocking = >
>>>>>>> qcom_flash_led_brightness_set;
>>>>>>> +       init_data.fwnode = node;
>>>>>>> +       init_data.devicename = NULL;
>>>>>>> +       init_data.default_label = NULL;
>>>>>>> +       init_data.devname_mandatory = false;
>>>>>>> +       rc = devm_led_classdev_flash_register_ext(parent,
>>>>>>> flash, >
>>>>>>> &init_data);
>>>>>>> +       if (rc < 0) {
>>>>>>> +               dev_err(chip->dev, "Register flash LED
>>>>>>> classdev
>>>>>>>>
>>>>>>> failed, rc=%d\n", rc);
>>>>>>> +               return rc;
>>>>>>> +       }
>>>>>>> +
>>>>>>> +       return qcom_flash_v4l2_init(led, node);
>>>>>>> +}
>>>>>>> +
>>>>>>> +static int qcom_flash_led_probe(struct platform_device
>>>>>>> *pdev)
>>>>>>> +{
>>>>>>> +       struct qcom_flash_chip *chip;
>>>>>>> +       struct qcom_flash_led *led;
>>>>>>> +       struct fwnode_handle *child;
>>>>>>> +       struct device *dev = &pdev->dev;
>>>>>>> +       struct regmap *map;
>>>>>>> +       struct reg_field *regs;
>>>>>>> +       int count, i, rc;
>>>>>>> +       u32 val, reg_base;
>>>>>>> +
>>>>>>> +       chip = devm_kzalloc(dev, sizeof(*chip),
>>>>>>> GFP_KERNEL);
>>>>>>> +       if (!chip)
>>>>>>> +               return -ENOMEM;
>>>>>>> +
>>>>>>> +       map = dev_get_regmap(dev->parent, NULL);
>>>>>>> +       if (!map) {
>>>>>>> +               dev_err(dev, "Failed to get parent
>>>>>>> regmap\n");
>>>>>>> +               return -EINVAL;
>>>>>>> +       }
>>>>>>> +
>>>>>>> +       rc = fwnode_property_read_u32(dev->fwnode, "reg",
>>>>>>> &reg_base);
>>>>>>> +       if (rc < 0) {
>>>>>>> +               dev_err(dev, "Failed to get register base
>>>>>>> address,
>>>>>>>> rc=%d\n", rc);
>>>>>>> +               return rc;
>>>>>>> +       }
>>>>>>> +
>>>>>>> +       rc = regmap_read(map, reg_base + FLASH_TYPE_REG,
>>>>>>> &val);
>>>>>>> +       if (rc < 0) {
>>>>>>> +               dev_err(dev, "Read flash module type
>>>>>>> failed, >
>>>>>>> rc=%d\n", rc);
>>>>>>> +               return rc;
>>>>>>> +       }
>>>>>>> +
>>>>>>> +       if (val != FLASH_TYPE_VAL){
>>>>>>> +               dev_err(dev, "type %#x is not a flash
>>>>>>> module\n", >
>>>>>>> val);
>>>>>>> +               return -ENODEV;
>>>>>>> +       }
>>>>>>> +
>>>>>>> +       rc = regmap_read(map, reg_base + FLASH_SUBTYPE_REG,
>>>>>>> &val);
>>>>>>> +       if (rc < 0) {
>>>>>>> +               dev_err(dev, "Read flash module subtype
>>>>>>> failed,
>>>>>>>>
>>>>>>> rc=%d\n", rc);
>>>>>>> +               return rc;
>>>>>>> +       }
>>>>>>> +
>>>>>>> +       if (val == FLASH_SUBTYPE_3CH_VAL) {
>>>>>>> +               chip->hw_type = QCOM_MVFLASH_3CH;
>>>>>>> +               chip->max_channels = 3;
>>>>>>> +               regs = mvflash_3ch_regs;
>>>>>>> +       } else if (val == FLASH_SUBTYPE_4CH_VAL) {
>>>>>>> +               chip->hw_type = QCOM_MVFLASH_4CH;
>>>>>>> +               chip->max_channels = 4;
>>>>>>> +               regs = mvflash_4ch_regs;
>>>>>>> +       } else {
>>>>>>> +               dev_err(dev, "flash subtype %#x is not yet
>>>>>>>>
>>>>>>> supported\n", val);
>>>>>>> +               return -ENODEV;
>>>>>>> +       }
>>>>>>> +
>>>>>>> +       for (i = 0; i < REG_MAX_COUNT; i++)
>>>>>>> +               regs[i].reg += reg_base;
>>>>>>> +
>>>>>>> +       rc = devm_regmap_field_bulk_alloc(dev, map, chip-
>>>>>>>> r_fields,
>>>>>>>> regs, REG_MAX_COUNT);
>>>>>>> +       if (rc < 0) {
>>>>>>> +               dev_err(dev, "failed to alloc regmap filed,
>>>>>>> rc=%d\n", > rc);
>>>>>>> +               return rc;
>>>>>>> +       }
>>>>>>> +
>>>>>>> +       chip->dev = dev;
>>>>>>> +       platform_set_drvdata(pdev, chip);
>>>>>>> +       mutex_init(&chip->lock);
>>>>>>> +       count = device_get_child_node_count(dev);
>>>>>>> +       if (count == 0 || count > chip->max_channels) {
>>>>>>> +               dev_err(dev, "No child or child count
>>>>>>> exceeds
>>>>>>> %d\n", > chip->max_channels);
>>>>>>> +               return -EINVAL;
>>>>>>> +       }
>>>>>>> +
>>>>>>> +       chip->leds = devm_kcalloc(dev, count, sizeof(*chip-
>>>>>>>> leds),
>>>>>>>> GFP_KERNEL);
>>>>>>> +       if (!chip->leds)
>>>>>>> +               return -ENOMEM;
>>>>>>> +
>>>>>>> +       device_for_each_child_node(dev, child) {
>>>>>>> +               led = &chip->leds[chip->leds_count];
>>>>>>> +               led->chip = chip;
>>>>>>> +               rc = qcom_flash_register_led_device(dev,
>>>>>>> child,
>>>>>>> led);
>>>>>>> +               if (rc < 0)
>>>>>>> +                       goto release;
>>>>>>> +
>>>>>>> +               chip->leds_count++;
>>>>>>> +       }
>>>>>>> +
>>>>>>> +       return 0;
>>>>>>> +release:
>>>>>>> +       while (chip->leds && chip->leds_count--)
>>>>>>> +               v4l2_flash_release(chip->leds[chip-
>>>>>>>> leds_count].v4l2_> flash);
>>>>>>> +       return rc;
>>>>>>> +}
>>>>>>> +
>>>>>>> +static int qcom_flash_led_remove(struct platform_device
>>>>>>> *pdev)
>>>>>>> +{
>>>>>>> +       struct qcom_flash_chip *chip=
>>>>>>> platform_get_drvdata(pdev);
>>>>>>> +
>>>>>>> +       while (chip->leds_count--)
>>>>>>> +               v4l2_flash_release(chip->leds[chip-
>>>>>>>> leds_count].v4l2_> flash);
>>>>>>> +
>>>>>>> +       mutex_destroy(&chip->lock);
>>>>>>> +       return 0;
>>>>>>> +}
>>>>>>> +
>>>>>>> +static const struct of_device_id
>>>>>>> qcom_flash_led_match_table[]
>>>>>>> = {
>>>>>>> +       { .compatible = "qcom,spmi-flash-led" },
>>>>>>> +       { }
>>>>>>> +};
>>>>>>> +
>>>>>>> +static struct platform_driver qcom_flash_led_driver = {
>>>>>>> +       .driver = {
>>>>>>> +               .name = "leds-qcom-flash",
>>>>>>> +               .of_match_table =
>>>>>>> qcom_flash_led_match_table,
>>>>>>> +       },
>>>>>>> +       .probe = qcom_flash_led_probe,
>>>>>>> +       .remove = qcom_flash_led_remove,
>>>>>>> +};
>>>>>>> +
>>>>>>> +module_platform_driver(qcom_flash_led_driver);
>>>>>>> +
>>>>>>> +MODULE_DESCRIPTION("QCOM Flash LED driver");
>>>>>>> +MODULE_LICENSE("GPL");
>>>>>
>>>>> Kind regards,
>>>>> Dylan Van Assche
>>>
>>> Kind regards,
>>> Dylan Van Assche
>>>
> 
> Kind regards,
> Dylan Van Assche
>
  
Fenglin Wu Nov. 2, 2022, 11:06 a.m. UTC | #9
On 2022/11/2 16:14, Dylan Van Assche wrote:
> 
> Hi Fenglin,
> 
>> Hi Dylan,
>>
>>
>> On 2022/11/2 1:39, Dylan Van Assche wrote:
>>>
>>> Hi Fenglin,
>>>
>>>> On 2022/10/31 18:34, Dylan Van Assche wrote:
>>>>>
>>>>> Hi Fenglin,
>>>>>
>>>>> Thanks for submitting these patches! They are really nice!
>>>>> I tested these patches on an SDM845 based device as the
>>>>> downstream
>>>>> driver is the same for the PMI8998 compared to the mentioned
>>>>> PMICs
>>>>> in
>>>>> this patchseries.
>>>>>
>>>>> Tested-by: Dylan Van Assche <me@dylanvanassche.be> # sdm845-
>>>>> shift-
>>>>> axolotl + pmi8998
>>>>>
>>>> Thanks for testing the patch at your side, Dylan!
>>>>
>>>>>>> Add initial driver to support flash LED module found in
>>>>>>> Qualcomm
>>>>>>> Technologies, Inc. PMICs. The flash module can have 3 or 4
>>>>>>> channels
>>>>>>> and each channel can be controlled indepedently and support
>>>>>>> full >
>>>>>>> scale
>>>>>>> current up to 1.5 A. It also supports connecting two
>>>>>>> channels >
>>>>>>> together
>>>>>>> to supply one LED component with full scale current up to 2
>>>>>>> A.
>>>>>>> In >
>>>>>>> that
>>>>>>> case, the current will be split on each channel
>>>>>>> symmetrically
>>>>>>> and
>>>>>>> the
>>>>>>> channels will be enabled and disabled at the same time.
>>>>>>>
>>>>>>> Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
>>>>>>> Tested-by: Luca Weiss <luca.weiss@fairphone.com> # >
>>>>>>> sm7225-
>>>>>>> fairphone-fp4 + pm6150l
>>>>>>> ---
>>>>>>>     drivers/leds/flash/Kconfig           |  15 +
>>>>>>>     drivers/leds/flash/Makefile          |   1 +
>>>>>>>     drivers/leds/flash/leds-qcom-flash.c | 700 >
>>>>>>> +++++++++++++++++++++++++++
>>>>>>>     3 files changed, 716 insertions(+)
>>>>>>>     create mode 100644 drivers/leds/flash/leds-qcom-flash.c
>>>>>>>
>>>>>>> diff --git a/drivers/leds/flash/Kconfig
>>>>>>> b/drivers/leds/flash/Kconfig
>>>>>>> index d3eb689b193c..f36a60409290 100644
>>>>>>> --- a/drivers/leds/flash/Kconfig
>>>>>>> +++ b/drivers/leds/flash/Kconfig
>>>>>>> @@ -61,6 +61,21 @@ config LEDS_MT6360
>>>>>>>              Independent current sources supply for each
>>>>>>> flash
>>>>>>> LED >
>>>>>>> support torch
>>>>>>>              and strobe mode.
>>>>>>>     
>>>>>>> +config LEDS_QCOM_FLASH
>>>>>>> +       tristate "LED support for flash module inside
>>>>>>> Qualcomm
>>>>>>>>
>>>>>>> Technologies, Inc. PMIC"
>>>>>>> +       depends on MFD_SPMI_PMIC || COMPILE_TEST
>>>>>>> +       depends on LEDS_CLASS && OF
>>>>>>> +       depends on V4L2_FLASH_LED_CLASS ||
>>>>>>> !V4L2_FLASH_LED_CLASS
>>>>>>> +       select REGMAP
>>>>>>> +       help
>>>>>>> +         This option enables support for the flash module
>>>>>>> found in
>>>>>>>> Qualcomm
>>>>>>> +         Technologies, Inc. PMICs. The flash module can
>>>>>>> have 3
>>>>>>> or
>>>>>>> 4 > flash LED
>>>>>>> +         channels and each channel is programmable to
>>>>>>> support
>>>>>>> up
>>>>>>> to > 1.5 A full
>>>>>>> +         scale current. It also supports connecting two
>>>>>>> channels'
>>>>>>>> output together
>>>>>>> +         to supply one LED component to achieve current up
>>>>>>> to
>>>>>>> 2 A.
>>>>>>>> In such case,
>>>>>>> +         the total LED currentwill be split symmetrically
>>>>>>> on
>>>>>>> each
>>>>>>>> channel and
>>>>>>> +         they will be enabled/disabled at the same time.
>>>>>>> +
>>>>>>>     config LEDS_RT4505
>>>>>>>            tristate "LED support for RT4505 flashlight
>>>>>>> controller"
>>>>>>>            depends on I2C && OF
>>>>>>> diff --git a/drivers/leds/flash/Makefile >
>>>>>>> b/drivers/leds/flash/Makefile
>>>>>>> index 0acbddc0b91b..8a60993f1a25 100644
>>>>>>> --- a/drivers/leds/flash/Makefile
>>>>>>> +++ b/drivers/leds/flash/Makefile
>>>>>>> @@ -6,6 +6,7 @@ obj-$(CONFIG_LEDS_AS3645A)      += leds-
>>>>>>> as3645a.o
>>>>>>>     obj-$(CONFIG_LEDS_KTD2692)     += leds-ktd2692.o
>>>>>>>     obj-$(CONFIG_LEDS_LM3601X)     += leds-lm3601x.o
>>>>>>>     obj-$(CONFIG_LEDS_MAX77693)    += leds-max77693.o
>>>>>>> +obj-$(CONFIG_LEDS_QCOM_FLASH)  += leds-qcom-flash.o
>>>>>>>     obj-$(CONFIG_LEDS_RT4505)      += leds-rt4505.o
>>>>>>>     obj-$(CONFIG_LEDS_RT8515)      += leds-rt8515.o
>>>>>>>     obj-$(CONFIG_LEDS_SGM3140)     += leds-sgm3140.o
>>>>>>> diff --git a/drivers/leds/flash/leds-qcom-flash.c >
>>>>>>> b/drivers/leds/flash/leds-qcom-flash.c
>>>>>>> new file mode 100644
>>>>>>> index 000000000000..a9fcf61600c3
>>>>>>> --- /dev/null
>>>>>>> +++ b/drivers/leds/flash/leds-qcom-flash.c
>>>>>>> @@ -0,0 +1,700 @@
>>>>>>> +// SPDX-License-Identifier: GPL-2.0-only
>>>>>>> +/*
>>>>>>> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All
>>>>>>> rights
>>>>>>>> reserved.
>>>>>>> + */
>>>>>>> +
>>>>>>> +#include <linux/bitfield.h>
>>>>>>> +#include <linux/bits.h>
>>>>>>> +#include <linux/leds.h>
>>>>>>> +#include <linux/led-class-flash.h>
>>>>>>> +#include <linux/module.h>
>>>>>>> +#include <linux/platform_device.h>
>>>>>>> +#include <linux/property.h>
>>>>>>> +#include <linux/regmap.h>
>>>>>>> +#include <media/v4l2-flash-led-class.h>
>>>>>>> +
>>>>>>> +/* registers definitions */
>>>>>>> +#define FLASH_TYPE_REG                 0x04
>>>>>>> +#define FLASH_TYPE_VAL                 0x18
>>>>>>> +
>>>>>>> +#define FLASH_SUBTYPE_REG              0x05
>>>>>>> +#define FLASH_SUBTYPE_3CH_VAL          0x04
>>>>>
>>>>> PMI8998 has also a 3 channel flash subtype, but reports 0x03 as
>>>>> subtype. The driver won't probe because of this since the
>>>>> subtype
>>>>> did
>>>>> not match. Changing this value to 0x03 made this driver work on
>>>>> SDM845
>>>>> based device as well with PMI8998. Would you consider
>>>>> supporting
>>>>> SDM845+PMI8998 as well?
>>>>>
>>>> I just double checked, flash module in PMI8998 (with subtype 0x3)
>>>> has
>>>> very similar register definition as the flash module in PM8150C
>>>> (with
>>>> subtype 0x4) that the driver is intended to support, it's good
>>>> know
>>>> that
>>>> it's 99% work.
>>>> I can add the 0x3 subtype support but the only problem is I
>>>> couldn't
>>>> find a device with PMI8998 to test it out. Would it be good if I
>>>> add
>>>> the
>>>> support and rely on your test result?
>>>
>>> Sure! I already have a branch locally to test your patches, happy
>>> to
>>> help! I have an SDM845 device here with PMI8998 with 2 LEDs: cold
>>> and
>>> warm white.
>>>
>> Thank you for the help!
>>>>
>>>>>>> +#define FLASH_SUBTYPE_4CH_VAL          0x07
>>>>>>> +
>>>>>>> +#define FLASH_TIMER_EN_BIT             BIT(7)
>>>>>>> +#define FLASH_TIMER_VAL_MASK           GENMASK(6, 0)
>>>>>>> +#define FLASH_TIMER_STEP_MS            10
>>>>>>> +
>>>>>>> +#define FLASH_STROBE_HW_SW_SEL_BIT     BIT(2)
>>>>>>> +#define SW_STROBE_VAL                  0
>>>>>>> +#define HW_STROBE_VAL                  1
>>>>>>> +#define FLASH_HW_STROBE_TRIGGER_SEL_BIT        BIT(1)
>>>>>>> +#define STROBE_LEVEL_TRIGGER_VAL       0
>>>>>>> +#define STROBE_EDGE_TRIGGER_VAL                1
>>>>>>> +#define FLASH_STROBE_POLARITY_BIT      BIT(0)
>>>>>>> +#define STROBE_ACTIVE_HIGH_VAL         1
>>>>>>> +
>>>>>>> +#define FLASH_IRES_MASK_4CH            BIT(0)
>>>>>>> +#define FLASH_IRES_MASK_3CH            GENMASK(1, 0)
>>>>>>> +#define FLASH_IRES_12P5MA_VAL          0
>>>>>>> +#define FLASH_IRES_5MA_VAL_4CH         1
>>>>>>> +#define FLASH_IRES_5MA_VAL_3CH         3
>>>>>>> +
>>>>>>> +/* constants */
>>>>>>> +#define FLASH_CURRENT_MAX_UA           1500000
>>>>>>> +#define TORCH_CURRENT_MAX_UA           500000
>>>>>>> +#define FLASH_TOTAL_CURRENT_MAX_UA     2000000
>>>>>>> +#define FLASH_CURRENT_DEFAULT_UA       1000000
>>>>>>> +#define TORCH_CURRENT_DEFAULT_UA       200000
>>>>>>> +
>>>>>>> +#define TORCH_IRES_UA                  5000
>>>>>>> +#define FLASH_IRES_UA                  12500
>>>>>>> +
>>>>>>> +#define FLASH_TIMEOUT_MAX_US           1280000
>>>>>>> +#define FLASH_TIMEOUT_STEP_US          10000
>>>>>>> +
>>>>>>> +enum hw_type {
>>>>>>> +       QCOM_MVFLASH_3CH,
>>>>>>> +       QCOM_MVFLASH_4CH,
>>>>>>> +};
>>>>>>> +
>>>>>>> +enum led_mode {
>>>>>>> +       FLASH_MODE,
>>>>>>> +       TORCH_MODE,
>>>>>>> +};
>>>>>>> +
>>>>>>> +enum led_strobe {
>>>>>>> +       SW_STROBE,
>>>>>>> +       HW_STROBE,
>>>>>>> +};
>>>>>>> +
>>>>>>> +enum {
>>>>>>> +       REG_STATUS1,
>>>>>>> +       REG_STATUS2,
>>>>>>> +       REG_STATUS3,
>>>>>>> +       REG_CHAN_TIMER,
>>>>>>> +       REG_ITARGET,
>>>>>>> +       REG_MODULE_EN,
>>>>>>> +       REG_IRESOLUTION,
>>>>>>> +       REG_CHAN_STROBE,
>>>>>>> +       REG_CHAN_EN,
>>>>>>> +       REG_MAX_COUNT,
>>>>>>> +};
>>>>>>> +
>>>>>>> +struct reg_field mvflash_3ch_regs[REG_MAX_COUNT] = {
>>>>>>> +       REG_FIELD(0x08, 0, 7),                  /*
>>>>>>> status1      */
>>>>>>> +       REG_FIELD(0x09, 0, 7),                  /*
>>>>>>> status2      */
>>>>>>> +       REG_FIELD(0x0a, 0, 7),                  /*
>>>>>>> status3      */
>>>>>>> +       REG_FIELD_ID(0x40, 0, 7, 3, 1),         /*
>>>>>>> chan_timer   */
>>>>>>> +       REG_FIELD_ID(0x43, 0, 6, 3, 1),         /*
>>>>>>> itarget      */
>>>>>>> +       REG_FIELD(0x46, 7, 7),                  /*
>>>>>>> module_en    */
>>>>>>> +       REG_FIELD(0x47, 0, 5),                  /*
>>>>>>> iresolution  */
>>>>>>> +       REG_FIELD_ID(0x49, 0, 2, 3, 1),         /*
>>>>>>> chan_strobe  */
>>>>>>> +       REG_FIELD(0x4c, 0, 2),                  /*
>>>>>>> chan_en      */
>>>>>>> +};
>>>>>
>>>>> These registers map perfectly for SDM845 with PMI8998 as well,
>>>>> adding
>>>>> support for this subtype (0x03) would be great.
>>>>>
>>>>>>> +
>>>>>>> +struct reg_field mvflash_4ch_regs[REG_MAX_COUNT] = {
>>>>>>> +       REG_FIELD(0x06, 0, 7),                  /*
>>>>>>> status1      */
>>>>>>> +       REG_FIELD(0x07, 0, 6),                  /*
>>>>>>> status2      */
>>>>>>> +       REG_FIELD(0x09, 0, 7),                  /*
>>>>>>> status3      */
>>>>>>> +       REG_FIELD_ID(0x3e, 0, 7, 4, 1),         /*
>>>>>>> chan_timer   */
>>>>>>> +       REG_FIELD_ID(0x42, 0, 6, 4, 1),         /*
>>>>>>> itarget      */
>>>>>>> +       REG_FIELD(0x46, 7, 7),                  /*
>>>>>>> module_en    */
>>>>>>> +       REG_FIELD(0x49, 0, 3),                  /*
>>>>>>> iresolution  */
>>>>>>> +       REG_FIELD_ID(0x4a, 0, 6, 4, 1),         /*
>>>>>>> chan_strobe  */
>>>>>>> +       REG_FIELD(0x4e, 0, 3),                  /*
>>>>>>> chan_en      */
>>>>>>> +};
>>>>>>> +
>>>>>>> +struct qcom_flash_led {
>>>>>>> +       struct qcom_flash_chip          *chip;
>>>>>>> +       struct led_classdev_flash       flash;
>>>>>>> +       struct v4l2_flash               *v4l2_flash;
>>>>>>> +       u32                             max_flash_current_m
>>>>>>> a;
>>>>>>> +       u32                             max_torch_current_m
>>>>>>> a;
>>>>>>> +       u32                             max_timeout_ms;
>>>>>>> +       u32                             flash_current_ma;
>>>>>>> +       u32                             flash_timeout_ms;
>>>>>>> +       u8                              *chan_id;
>>>>>>> +       u8                              chan_count;
>>>>>>> +       bool                            enabled;
>>>>>>> +};
>>>>>>> +
>>>>>>> +struct qcom_flash_chip {
>>>>>>> +       struct qcom_flash_led   *leds;
>>>>>>> +       struct regmap_field     *r_fields[REG_MAX_COUNT];
>>>>>>> +       struct device           *dev;
>>>>>>> +       struct mutex            lock;
>>>>>>> +       enum hw_type            hw_type;
>>>>>>> +       u8                      leds_count;
>>>>>>> +       u8                      max_channels;
>>>>>>> +       u8                      chan_en_bits;
>>>>>>> +};
>>>>>>> +
>>>>>>> +static int set_flash_module_en(struct qcom_flash_led *led,
>>>>>>> bool
>>>>>>> en)
>>>>>>> +{
>>>>>>> +       struct qcom_flash_chip *chip= led->chip;
>>>>>>> +       u8 led_mask = 0, val;
>>>>>>> +       int i, rc;
>>>>>>> +
>>>>>>> +       for (i = 0; i < led->chan_count; i++)
>>>>>>> +               led_mask |= BIT(led->chan_id[i] - 1);
>>>>>>> +
>>>>>>> +       mutex_lock(&chip->lock);
>>>>>>> +       if (en)
>>>>>>> +               chip->chan_en_bits |= led_mask;
>>>>>>> +       else
>>>>>>> +               chip->chan_en_bits &= ~led_mask;
>>>>>>> +
>>>>>>> +       val = !!chip->chan_en_bits;
>>>>>>> +       rc = regmap_field_write(chip-
>>>>>>>> r_fields[REG_MODULE_EN],
>>>>>>> val);
>>>>>>> +       if (rc < 0)
>>>>>>> +               dev_err(chip->dev, "write module_en failed,
>>>>>>> rc=%d\n", > rc);
>>>>>>> +       mutex_unlock(&chip->lock);
>>>>>>> +
>>>>>>> +       return rc;
>>>>>>> +}
>>>>>>> +
>>>>>>> +static int set_flash_current(struct qcom_flash_led *led,
>>>>>>> u32 >
>>>>>>> current_ma, enum led_mode mode)
>>>>>>> +{
>>>>>>> +       struct qcom_flash_chip *chip= led->chip;
>>>>>>> +       u32 itarg_ua = current_ma * 1000 / led->chan_count
>>>>>>> + 1;
>>>>>>> +       u32 ires_ua = (mode ==FLASH_MODE) ? FLASH_IRES_UA :
>>>>>>>>
>>>>>>> TORCH_IRES_UA;
>>>>>>> +       u8 val, shift, ires_mask =0, ires_val = 0, chan_id;
>>>>>>> +       int i, rc;
>>>>>>> +
>>>>>>> +       /*
>>>>>>> +        * Split the current across the channels and set
>>>>>>> the
>>>>>>> +        * IRESOLUTION and ITARGET registers accordingly.
>>>>>>> +        */
>>>>>>> +       for (i = 0; i < led->chan_count; i++) {
>>>>>>> +               chan_id = led->chan_id[i];
>>>>>>> +               if (itarg_ua < ires_ua)
>>>>>>> +                       val = 0;
>>>>>>> +               else
>>>>>>> +                       val = itarg_ua / ires_ua - 1;
>>>>>>> +
>>>>>>> +               rc = regmap_fields_write(chip-
>>>>>>>> r_fields[REG_ITARGET], > chan_id - 1, val);
>>>>>>> +               if (rc < 0)
>>>>>>> +                       returnrc;
>>>>>>> +
>>>>>>> +               if (chip->hw_type == QCOM_MVFLASH_3CH) {
>>>>>>> +                       shift = (chan_id - 1) * 2;
>>>>>>> +                       ires_mask |= FLASH_IRES_MASK_3CH <<
>>>>>>> shift;
>>>>>>> +                       ires_val |= ((mode == FLASH_MODE) ?
>>>>>>> +                               (FLASH_IRES_12P5MA_VAL <<
>>>>>>> shift) :
>>>>>>> +                               (FLASH_IRES_5MA_VAL_3CH <<
>>>>>>> shift));
>>>>>>> +               } else if (chip->hw_type ==
>>>>>>> QCOM_MVFLASH_4CH) {
>>>>>>> +                       shift = chan_id - 1;
>>>>>>> +                       ires_mask |= FLASH_IRES_MASK_4CH <<
>>>>>>> shift;
>>>>>>> +                       ires_val |= ((mode == FLASH_MODE) ?
>>>>>>> +                               (FLASH_IRES_12P5MA_VAL <<
>>>>>>> shift) :
>>>>>>> +                               (FLASH_IRES_5MA_VAL_4CH <<
>>>>>>> shift));
>>>>>>> +               }
>>>>>>> +       }
>>>>>>> +
>>>>>>> +       return > regmap_field_update_bits(chip-
>>>>>>>> r_fields[REG_IRESOLUTION], ires_mask, > ires_val);
>>>>>>> +}
>>>>>>> +
>>>>>>> +static int set_flash_timeout(struct qcom_flash_led *led,
>>>>>>> u32 >
>>>>>>> timeout_ms)
>>>>>>> +{
>>>>>>> +       struct qcom_flash_chip *chip= led->chip;
>>>>>>> +       u8 val, chan_id;
>>>>>>> +       int rc, i;
>>>>>>> +
>>>>>>> +       /* set SAFETY_TIMER for all the channels connected
>>>>>>> to
>>>>>>> the >
>>>>>>> same LED */
>>>>>>> +       timeout_ms = min_t(u32, timeout_ms, led-
>>>>>>>> max_timeout_ms);
>>>>>>> +       for (i = 0; i < led->chan_count; i++) {
>>>>>>> +               chan_id = led->chan_id[i];
>>>>>>> +               val = timeout_ms / FLASH_TIMER_STEP_MS;
>>>>>>> +               val = clamp_t(u8, val, 0,
>>>>>>> FLASH_TIMER_VAL_MASK);
>>>>>>> +               if (timeout_ms)
>>>>>>> +                       val |= FLASH_TIMER_EN_BIT;
>>>>>>> +
>>>>>>> +               rc = > regmap_fields_write(chip-
>>>>>>>> r_fields[REG_CHAN_TIMER], chan_id - 1, > val);
>>>>>>> +               if (rc < 0)
>>>>>>> +                       returnrc;
>>>>>>> +       }
>>>>>>> +
>>>>>>> +       return 0;
>>>>>>> +}
>>>>>>> +
>>>>>>> +static int set_flash_strobe(struct qcom_flash_led *led,
>>>>>>> enum >
>>>>>>> led_strobe strobe, bool state)
>>>>>>> +{
>>>>>>> +       struct qcom_flash_chip *chip= led->chip;
>>>>>>> +       u8 mask, val, chan_id = 0,chan_mask = 0;
>>>>>>> +       int rc, i;
>>>>>>> +
>>>>>>> +       /* Set SW strobe config for all channels connected
>>>>>>> to
>>>>>>> the
>>>>>>> LED > */
>>>>>>> +       for (i = 0; i < led->chan_count; i++) {
>>>>>>> +               chan_id = led->chan_id[i];
>>>>>>> +               if (strobe == SW_STROBE)
>>>>>>> +                       val =
>>>>>>> FIELD_PREP(FLASH_STROBE_HW_SW_SEL_BIT, > SW_STROBE_VAL);
>>>>>>> +               else
>>>>>>> +                       val =
>>>>>>> FIELD_PREP(FLASH_STROBE_HW_SW_SEL_BIT, > HW_STROBE_VAL);
>>>>>>> +
>>>>>>> +               val |=
>>>>>>> FIELD_PREP(FLASH_HW_STROBE_TRIGGER_SEL_BIT,
>>>>>>>> STROBE_LEVEL_TRIGGER_VAL) |
>>>>>>> +                       FIELD_PREP(FLASH_STROBE_POLARITY_BI
>>>>>>> T, >
>>>>>>> STROBE_ACTIVE_HIGH_VAL);
>>>>>>> +               rc = > regmap_fields_write(chip-
>>>>>>>> r_fields[REG_CHAN_STROBE], chan_id - 1, > val);
>>>>>>> +               if (rc < 0)
>>>>>>> +                       returnrc;
>>>>>>> +
>>>>>>> +               chan_mask |= BIT(chan_id - 1);
>>>>>>> +       }
>>>>>>> +
>>>>>>> +       /* enable/disable flash channels */
>>>>>>> +       mask = chan_mask;
>>>>>>> +       val = state ? mask : 0;
>>>>>>> +       rc = regmap_field_update_bits(chip-
>>>>>>>> r_fields[REG_CHAN_EN],
>>>>>>>> mask, val);
>>>>>>> +       if (rc < 0)
>>>>>>> +               return rc;
>>>>>>> +
>>>>>>> +       led->enabled = state;
>>>>>>> +       return 0;
>>>>>>> +}
>>>>>>> +
>>>>>>> +static int qcom_flash_brightness_set(struct
>>>>>>> led_classdev_flash
>>>>>>>>
>>>>>>> *fled_cdev, u32 brightness)
>>>>>>> +{
>>>>>>> +       struct qcom_flash_led *led =
>>>>>>> container_of(fled_cdev,
>>>>>>> struct
>>>>>>>> qcom_flash_led, flash);
>>>>>>> +
>>>>>>> +       led->flash_current_ma = min_t(u32, led-
>>>>>>>> max_flash_current_ma, > brightness / 1000);
>>>>>>> +       return 0;
>>>>>>> +}
>>>>>
>>>>> This doesn't seem to work in torch mode for me on PMI8998. If
>>>>> the
>>>>> brightness is 0, the torch is OFF as expected, but when the
>>>>> torch
>>>>> is
>>>>> ON, you cannot control the brightness. The brightness is the
>>>>> same
>>>>> for
>>>>> [1, 255]. If the hardware cannot change the brightness in torch
>>>>> mode,
>>>>> it would be nice to report a max_brightness value of 1 instead
>>>>> of
>>>>> 255
>>>>> for userspace. This could be a limitation of the PMI8998, not
>>>>> sure.
>>>>> Do you have any insights here? This driver is already 99%
>>>>> working
>>>>> for
>>>>> SDM845+PMI8998.
>>>>>
>>>>> Flash mode works great, timeout & brightness can be configured
>>>>> just
>>>>> fine.
>>>>>
>>>>
>>>> Here, function qcom_flash_brightness_set() is used for setting
>>>> brightness in flash mode and it was supposed to be working with
>>>> following commands combination:
>>>>           echo xxx > flash_brightness
>>>>           echo 1 > flash_strobe  (you will need to toggle
>>>> flash_strobe
>>>> when you
>>>> enabling it again)
>>>>
>>>> Can you check if you can see the brightness change in flash mode
>>>> when
>>>> you updating the flash_brightness value with these commands?
>>>>
>>>> You can echo any value between [0, max_flash_brightness] into the
>>>> flash_brightness, there is a "max_flash_brightness" sysfs node
>>>> and
>>>> the
>>>> value comes from DT property "flash-max-microamp", ex. my dtsi
>>>> node
>>>> has
>>>> "flash-max-microamp = <2000000>;" defined so I am having
>>>> following
>>>> value
>>>> for max_flash_brightness:
>>>>
>>>> kalama:/sys/class/leds/white:flash-0 # cat max_flash_brightness
>>>> 2000000
>>>>
>>>> And by default flash mode uses 12500uA resolution so you won't
>>>> see
>>>> brightness change when you update it with values between [1,
>>>> 12500].
>>>
>>> Yes, this works perfectly fine on PMI8998. I can adjust the flash
>>> brightness and flash timeout perfectly.
>>>
>>>>
>>>> If you want to update the brightness for torch node, you can
>>>> directly
>>>> update the "brightness" node with values between [0, 255], and
>>>> it's
>>>> mapping to the torch current between [0, led-max-microamp].
>>>> "led-max-microamp" is also has value coming from the DT property.
>>>>
>>>> This worked at my side on both pm8150C and pm8550.I think it
>>>> should
>>>> work
>>>> on PMI8998 as well because the flash module in it is very similar
>>>> to
>>>> the
>>>> one in PM8150c. Let me know if you still see such issues at your
>>>> side.
>>>> Thanks
>>>
>>> Only here I have an issue with PMI8998: the "brightness" nodes
>>> should
>>> change the brightness of the torch, but it doesn't make a
>>> difference
>>> here. When I do:
>>>
>>> - echo 0 > brightness --> LED turns OFF
>>> - echo 255 > brightness --> LED turns ON
>>> - echo 100 > brightness --> LED is still ON, but brightness is the
>>> same
>>> as with 255.
>>>
>>> Could it be that PMI8998 is slightly different here than with
>>> PM8150c
>>> for example? Maybe it doesn't support brightness for torch?
>>>
>>> Here's my DTS:
>>>
>>> *PMI8998*
>>>
>>> pmi8998_flash: led-controller@d300 {
>>>          compatible = "qcom,pm6150l-flash-led", "qcom,spmi-flash-
>>> led";
>>>          reg = <0xd300>;
>>>          status = "disabled";
>>> };
>>>
>>> *SDM845 SHIFT axolotl*
>>>
>>> &pmi8998_flash {
>>>          status = "okay";
>>>
>>>          led-0 {
>>>                  function = LED_FUNCTION_FLASH;
>>>                  color = <LED_COLOR_ID_WHITE>;
>>>                  led-sources = <1>;
>>>                  led-max-microamp = <180000>;
>>>                  flash-max-microamp = <1000000>;
>>>                  flash-max-timeout-us = <1280000>;
>>>          };
>>>
>>>          led-1 {
>>>                  function = LED_FUNCTION_FLASH;
>>>                  color = <LED_COLOR_ID_YELLOW>;
>>>                  led-sources = <2>;
>>>                  led-max-microamp = <180000>;
>>>                  flash-max-microamp = <1000000>;
>>>                  flash-max-timeout-us = <1280000>;
>>>          };
>>> };
>>>
>> Thank you for getting back all the details. The devicetree node looks
>> good to me.
>>
>> I checked again and confirmed that the flash modules in PMI8998 and
>> PM8150C have the same register definition for ITARGETx (0xD343 + x)
>> and
>> IRESOLUTION (0xD347), these are the only 2 settings would impact LED
>> brightness, and in torch mode, IRESOLUTION is fixed to 5mA and only
>> ITARGET is updated accordingly.
>>
>> I updated my workspace to use the same current for torch mode as your
>> settings in devicetree and tried again on my PM8150C device,I could
>> notice the brightness change when echoing different values to the
>> brightness sysfs node, however, when I updating values between 255
>> and
>> 200, it wasn't a very noticeable brightness change with naked eys,
>> but I
>> could see the ITRAGETx register changed accordingly when reading its
>> value back from the regmap debugfs node.
>>
>> Can you try the same and see if the register got updated accordingly
>> when you updating brightness values? If yes, I would wonder if the
>> LED
>> component on your device has upper current limit in torch mode close
>> to
>> (100 / 255 ) * 180mA so you that you can't observe the brightness
>> change
>> when updating between 100 to 255. Another easier thing to try, can
>> you
>> echo a lower brightness value, such as 10, to see if you can notice
>> the
>> brightness change?
>>
> 
> Aha! It does seem to work partially!
> 
> I tried it with brightness 0 --> 255 --> 1. This order keeps the
> highest brightness at all times, matching 255. The other way around: 0
> --> 1 --> 255 keeps the lowest brightness, matching 1.
> Changing the brightness only works if the LED was turned OFF first:
> 
> 0 --> 255 --> 0 --> 1
> 0 --> 1 --> 0 --> 255
> 
> both work fine, verified it with the following shell commands (assumed
> that the LED was turned OFF to start):
> 
> echo 1 > brightness && sleep 3 && echo 0 > brightness && echo 255 >
> brightness
> echo 255 > brightness && sleep 3 &&  echo 0 > brightness && echo 1 >
> brightness
> 
> Maybe a register needs to be reset when the brightness changes?
> 

Hi Dylan,

Would you mind to help me testing this small change on PMI8998? It 
simply toggles the CHANNEL_EN bit when updating LED brightness. If it 
works, I will add it specifically for PMI8998 in patch v5.

@@ -241,8 +243,21 @@ static int set_flash_strobe(struct qcom_flash_led 
*led, enum led_strobe s
trobe,
                 chan_mask |= BIT(chan_id - 1);
         }

-       /* enable/disable flash channels */
         mask = chan_mask;
+       /*
+        * For flash module inside PMI8998, if strobe(true) is called when
+        * the LED is already enabled, disable the channel 1st and then
+        * enable it again.  This could happen when updating LED brightness
+        * after LED is turned on.
+        */
+       if (led->enabled && (led->enabled == state)) {
+               rc = 
regmap_field_update_bits(chip->r_fields[REG_CHAN_EN], mask, 0);
+               if (rc < 0)
+                       return rc;
+       }
+
+       /* enable/disable flash channels */
         val = state ? mask : 0;
         rc = regmap_field_update_bits(chip->r_fields[REG_CHAN_EN], 
mask, val);
         if (rc < 0)

Thanks
Fenglin Wu

>>>
>>>>
>>>>>>> +
>>>>>>> +static int qcom_flash_timeout_set(struct
>>>>>>> led_classdev_flash >
>>>>>>> *fled_cdev, u32 timeout)
>>>>>>> +{
>>>>>>> +       struct qcom_flash_led *led =
>>>>>>> container_of(fled_cdev,
>>>>>>> struct
>>>>>>>> qcom_flash_led, flash);
>>>>>>> +
>>>>>>> +       led->flash_timeout_ms = timeout / 1000;
>>>>>>> +       return 0;
>>>>>>> +}
>>>>>>> +
>>>>>>> +static int qcom_flash_strobe_set(struct led_classdev_flash
>>>>>>>>
>>>>>>> *fled_cdev, bool state)
>>>>>>> +{
>>>>>>> +       struct qcom_flash_led *led =
>>>>>>> container_of(fled_cdev,
>>>>>>> struct
>>>>>>>> qcom_flash_led, flash);
>>>>>>> +       int rc;
>>>>>>> +
>>>>>>> +       rc = set_flash_current(led, led->flash_current_ma,
>>>>>>>>
>>>>>>> FLASH_MODE);
>>>>>>> +       if (rc < 0)
>>>>>>> +               return rc;
>>>>>>> +
>>>>>>> +       rc = set_flash_timeout(led, led->flash_timeout_ms);
>>>>>>> +       if (rc < 0)
>>>>>>> +               return rc;
>>>>>>> +
>>>>>>> +       rc = set_flash_module_en(led, state);
>>>>>>> +       if (rc < 0)
>>>>>>> +               return rc;
>>>>>>> +
>>>>>>> +       return set_flash_strobe(led,SW_STROBE, state);
>>>>>>> +}
>>>>>>> +
>>>>>>> +static int qcom_flash_strobe_get(struct led_classdev_flash
>>>>>>>>
>>>>>>> *fled_cdev, bool *state)
>>>>>>> +{
>>>>>>> +       struct qcom_flash_led *led =
>>>>>>> container_of(fled_cdev,
>>>>>>> struct
>>>>>>>> qcom_flash_led, flash);
>>>>>>> +
>>>>>>> +       *state = led->enabled;
>>>>>>> +       return 0;
>>>>>>> +}
>>>>>>> +
>>>>>>> +static int qcom_flash_fault_get(struct led_classdev_flash
>>>>>>>>
>>>>>>> *fled_cdev, u32 *fault)
>>>>>>> +{
>>>>>>> +       struct qcom_flash_led *led =
>>>>>>> container_of(fled_cdev,
>>>>>>> struct
>>>>>>>> qcom_flash_led, flash);
>>>>>>> +       struct qcom_flash_chip *chip= led->chip;
>>>>>>> +       u8 shift, chan_id = 0, chan_mask = 0;
>>>>>>> +       u8 ot_mask = 0, oc_mask = 0, uv_mask = 0;
>>>>>>> +       u32 val, fault_sts = 0;
>>>>>>> +       int i, rc;
>>>>>>> +
>>>>>>> +       rc = regmap_field_read(chip->r_fields[REG_STATUS1],
>>>>>>> &val);
>>>>>>> +       if (rc < 0)
>>>>>>> +               return rc;
>>>>>>> +
>>>>>>> +       for (i = 0; i < led->chan_count; i++) {
>>>>>>> +               chan_id = led->chan_id[i];
>>>>>>> +               shift = (chan_id - 1) * 2;
>>>>>>> +               if (val & BIT(shift))
>>>>>>> +                       fault_sts |=
>>>>>>> LED_FAULT_SHORT_CIRCUIT;
>>>>>>> +               chan_mask |= BIT(chan_id - 1);
>>>>>>> +       }
>>>>>>> +
>>>>>>> +       rc = regmap_field_read(chip->r_fields[REG_STATUS2],
>>>>>>> &val);
>>>>>>> +       if (rc < 0)
>>>>>>> +               return rc;
>>>>>>> +
>>>>>>> +       if (chip->hw_type == QCOM_MVFLASH_3CH) {
>>>>>>> +               ot_mask = 0x0f;
>>>>>>> +               oc_mask = 0xe0;
>>>>>>> +               uv_mask = 0x10;
>>>>>>> +       } else if (chip->hw_type == QCOM_MVFLASH_4CH) {
>>>>>>> +               ot_mask = 0x70;
>>>>>>> +               oc_mask = 0x0e;
>>>>>>> +               uv_mask = 0x01;
>>>>>>> +       }
>>>>>>> +
>>>>>>> +       if (val & ot_mask)
>>>>>>> +               fault_sts |= LED_FAULT_OVER_TEMPERATURE;
>>>>>>> +       if (val & oc_mask)
>>>>>>> +               fault_sts |= LED_FAULT_OVER_CURRENT;
>>>>>>> +       if (val & uv_mask)
>>>>>>> +               fault_sts |= LED_FAULT_INPUT_VOLTAGE;
>>>>>>> +
>>>>>>> +       rc = regmap_field_read(chip->r_fields[REG_STATUS3],
>>>>>>> &val);
>>>>>>> +       if (rc < 0)
>>>>>>> +               return rc;
>>>>>>> +
>>>>>>> +       if (chip->hw_type == QCOM_MVFLASH_3CH) {
>>>>>>> +               if (val & chan_mask)
>>>>>>> +                       fault_sts |= LED_FAULT_TIMEOUT;
>>>>>>> +       } else if (chip->hw_type == QCOM_MVFLASH_4CH) {
>>>>>>> +               for (i = 0; i < led->chan_count; i++) {
>>>>>>> +                       chan_id = led->chan_id[i];
>>>>>>> +                       shift = (chan_id - 1) * 2;
>>>>>>> +                       if (val & BIT(shift))
>>>>>>> +                               fault_sts |=
>>>>>>> LED_FAULT_TIMEOUT;
>>>>>>> +               }
>>>>>>> +       }
>>>>>>> +
>>>>>>> +       *fault = fault_sts;
>>>>>>> +       return 0;
>>>>>>> +}
>>>>>>> +
>>>>>>> +static int qcom_flash_led_brightness_set(struct
>>>>>>> led_classdev >
>>>>>>> *led_cdev,
>>>>>>> +                                       enum led_brightness
>>>>>>>>
>>>>>>> brightness)
>>>>>>> +{
>>>>>>> +       struct led_classdev_flash *fled_cdev =
>>>>>>> +               container_of(led_cdev, struct
>>>>>>> led_classdev_flash, >
>>>>>>> led_cdev);
>>>>>>> +       struct qcom_flash_led *led =
>>>>>>> +               container_of(fled_cdev, struct
>>>>>>> qcom_flash_led,
>>>>>>>>
>>>>>>> flash);
>>>>>>> +       u32 current_ma = brightness * led-
>>>>>>>> max_torch_current_ma
>>>>>>> / >
>>>>>>> LED_FULL;
>>>>>>> +       bool enable = !!brightness;
>>>>>>> +       int rc;
>>>>>>> +
>>>>>>> +       rc = set_flash_current(led, current_ma,
>>>>>>> TORCH_MODE);
>>>>>>> +       if (rc < 0)
>>>>>>> +               return rc;
>>>>>>> +
>>>>>>> +       /* disable flash timeout fortorch LED */
>>>>>>> +       rc = set_flash_timeout(led, 0);
>>>>>>> +       if (rc < 0)
>>>>>>> +               return rc;
>>>>>>> +
>>>>>>> +       rc = set_flash_module_en(led, enable);
>>>>>>> +       if (rc < 0)
>>>>>>> +               return rc;
>>>>>>> +
>>>>>>> +       return set_flash_strobe(led,SW_STROBE, enable);
>>>>>>> +}
>>>>>>> +
>>>>>>> +static const struct led_flash_ops qcom_flash_ops = {
>>>>>>> +       .flash_brightness_set = qcom_flash_brightness_set,
>>>>>>> +       .strobe_set = qcom_flash_strobe_set,
>>>>>>> +       .strobe_get = qcom_flash_strobe_get,
>>>>>>> +       .timeout_set = qcom_flash_timeout_set,
>>>>>>> +       .fault_get = qcom_flash_fault_get,
>>>>>>> +};
>>>>>>> +
>>>>>>> +#if IS_ENABLED(CONFIG_V4L2_FLASH_LED_CLASS)
>>>>>>> +static int qcom_flash_external_strobe_set(struct
>>>>>>> v4l2_flash >
>>>>>>> *v4l2_flash, bool enable)
>>>>>>> +{
>>>>>>> +       struct led_classdev_flash *flash = v4l2_flash-
>>>>>>>> fled_cdev;
>>>>>>> +       struct qcom_flash_led *led = container_of(flash,
>>>>>>> struct
>>>>>>>>
>>>>>>> qcom_flash_led, flash);
>>>>>>> +       int rc;
>>>>>>> +
>>>>>>> +       rc = set_flash_module_en(led, enable);
>>>>>>> +       if (rc < 0)
>>>>>>> +               return rc;
>>>>>>> +
>>>>>>> +       if (enable)
>>>>>>> +               return set_flash_strobe(led, HW_STROBE,
>>>>>>> true);
>>>>>>> +       else
>>>>>>> +               return set_flash_strobe(led, SW_STROBE,
>>>>>>> false);
>>>>>>> +}
>>>>>>> +
>>>>>>> +static enum led_brightness
>>>>>>> qcom_flash_intensity_to_led_brightness(
>>>>>>> +               struct v4l2_flash *v4l2_flash, s32
>>>>>>> intensity)
>>>>>>> +{
>>>>>>> +       struct led_classdev_flash *flash = v4l2_flash-
>>>>>>>> fled_cdev;
>>>>>>> +       struct qcom_flash_led *led = container_of(flash,
>>>>>>> struct
>>>>>>>>
>>>>>>> qcom_flash_led, flash);
>>>>>>> +       u32 current_ma = intensity/ 1000;
>>>>>>> +
>>>>>>> +       current_ma = min_t(u32, current_ma, > led-
>>>>>>>> max_torch_current_ma);
>>>>>>> +       if (!current_ma)
>>>>>>> +               return LED_OFF;
>>>>>>> +
>>>>>>> +       return current_ma * LED_FULL/ led-
>>>>>>>> max_torch_current_ma;
>>>>>>> +}
>>>>>>> +
>>>>>>> +static s32 qcom_flash_brightness_to_led_intensity(struct
>>>>>>> v4l2_flash > *v4l2_flash,
>>>>>>> +                                       enum led_brightness
>>>>>>>>
>>>>>>> brightness)
>>>>>>> +{
>>>>>>> +       struct led_classdev_flash *flash = v4l2_flash-
>>>>>>>> fled_cdev;
>>>>>>> +       struct qcom_flash_led *led = container_of(flash,
>>>>>>> struct
>>>>>>>>
>>>>>>> qcom_flash_led, flash);
>>>>>>> +
>>>>>>> +       return (brightness * led->max_torch_current_ma *
>>>>>>> 1000)
>>>>>>> / >
>>>>>>> LED_FULL;
>>>>>>> +}
>>>>>>> +
>>>>>>> +static const struct v4l2_flash_ops qcom_v4l2_flash_ops = {
>>>>>>> +       .external_strobe_set =
>>>>>>> qcom_flash_external_strobe_set,
>>>>>>> +       .intensity_to_led_brightness= >
>>>>>>> qcom_flash_intensity_to_led_brightness,
>>>>>>> +       .led_brightness_to_intensity= >
>>>>>>> qcom_flash_brightness_to_led_intensity,
>>>>>>> +};
>>>>>>> +
>>>>>>> +static int qcom_flash_v4l2_init(struct qcom_flash_led
>>>>>>> *led,
>>>>>>> struct
>>>>>>>> fwnode_handle *fwnode)
>>>>>>> +{
>>>>>>> +       struct v4l2_flash_config v4l2_cfg = {0};
>>>>>>> +       struct led_flash_setting *s = &v4l2_cfg.intensity;
>>>>>>> +
>>>>>>> +       if (!(led->flash.led_cdev.flags &
>>>>>>> LED_DEV_CAP_FLASH))
>>>>>>> +               return 0;
>>>>>>> +
>>>>>>> +       s->min = s->step = TORCH_IRES_UA * led->chan_count;
>>>>>>> +       s->max = led->max_torch_current_ma * 1000;
>>>>>>> +       s->val = min_t(u32, s->max,
>>>>>>> TORCH_CURRENT_DEFAULT_UA);
>>>>>>> +
>>>>>>> +       strscpy(v4l2_cfg.dev_name, >led-
>>>>>>>> flash.led_cdev.dev-
>>>>>>>> kobj.name,
>>>>>>> +                                       sizeof(v4l2_cfg.dev
>>>>>>> _nam
>>>>>>> e));
>>>>>>> +       v4l2_cfg.has_external_strobe= 1;
>>>>>>> +       v4l2_cfg.flash_faults = LED_FAULT_INPUT_VOLTAGE | >
>>>>>>> LED_FAULT_OVER_CURRENT |
>>>>>>> +               LED_FAULT_SHORT_CIRCUIT |
>>>>>>> LED_FAULT_OVER_TEMPERATURE > | LED_FAULT_TIMEOUT;
>>>>>>> +
>>>>>>> +       led->v4l2_flash = v4l2_flash_init(led->chip->dev,
>>>>>>> fwnode, >
>>>>>>> &led->flash,
>>>>>>> +                                       &qcom_v4l2_flash_op
>>>>>>> s, >
>>>>>>> &v4l2_cfg);
>>>>>>> +       return PTR_ERR_OR_ZERO(led->v4l2_flash);
>>>>>>> +}
>>>>>>> +# else
>>>>>>> +static int qcom_flash_v4l2_init(struct qcom_flash_led
>>>>>>> *led,
>>>>>>> struct
>>>>>>>> fwnode_handle *fwnode)
>>>>>>> +{
>>>>>>> +       return 0;
>>>>>>> +}
>>>>>>> +#endif
>>>>>>> +
>>>>>>> +static int qcom_flash_register_led_device(struct device
>>>>>>> *parent,
>>>>>>> +               struct fwnode_handle *node, struct
>>>>>>> qcom_flash_led >
>>>>>>> *led)
>>>>>>> +{
>>>>>>> +       struct qcom_flash_chip *chip= led->chip;
>>>>>>> +       struct led_init_data init_data;
>>>>>>> +       struct led_classdev_flash *flash;
>>>>>>> +       struct led_flash_setting *s;
>>>>>>> +       u32 count, val;
>>>>>>> +       u32 channels[4];
>>>>>>> +       int i, rc;
>>>>>>> +
>>>>>>> +       flash = &led->flash;
>>>>>>> +       count = fwnode_property_count_u32(node, "led-
>>>>>>> sources");
>>>>>>> +       if (count <= 0) {
>>>>>>> +               dev_err(chip->dev, "No led-sources
>>>>>>> specified\n");
>>>>>>> +               return -ENODEV;
>>>>>>> +       }
>>>>>>> +
>>>>>>> +       if (count > chip->max_channels) {
>>>>>>> +               dev_err(chip->dev, "led-sources count %u
>>>>>>> exceeds >
>>>>>>> maximum channel count %u\n",
>>>>>>> +                               count, chip->max_channels);
>>>>>>> +               return -EINVAL;
>>>>>>> +       }
>>>>>>> +
>>>>>>> +       rc = fwnode_property_read_u32_array(node, "led-
>>>>>>> sources", >
>>>>>>> channels, count);
>>>>>>> +       if (rc < 0) {
>>>>>>> +               dev_err(chip->dev, "get led-sources failed,
>>>>>>> rc=%d\n", > rc);
>>>>>>> +               return rc;
>>>>>>> +       }
>>>>>>> +
>>>>>>> +       led->chan_count = count;
>>>>>>> +       led->chan_id = devm_kcalloc(chip->dev, count,
>>>>>>> sizeof(u8), >
>>>>>>> GFP_KERNEL);
>>>>>>> +       if (!led->chan_id)
>>>>>>> +               return -ENOMEM;
>>>>>>> +
>>>>>>> +       for (i = 0; i < count; i++) {
>>>>>>> +               if (channels[i] > chip->max_channels) {
>>>>>>> +                       dev_err(chip->dev, "led-source out
>>>>>>> of
>>>>>>> HW >
>>>>>>> support range [1-%u]\n",
>>>>>>> +                                       chip-
>>>>>>>> max_channels);
>>>>>>> +                       return-EINVAL;
>>>>>>> +               }
>>>>>>> +
>>>>>>> +               led->chan_id[i] = channels[i];
>>>>>>> +       }
>>>>>>> +
>>>>>>> +       rc = fwnode_property_read_u32(node, "led-max-
>>>>>>> microamp",
>>>>>>>>
>>>>>>> &val);
>>>>>>> +       if (rc < 0) {
>>>>>>> +               dev_err(chip->dev, "Get led-max-microamp
>>>>>>> failed, >
>>>>>>> rc=%d\n", rc);
>>>>>>> +               return rc;
>>>>>>> +       }
>>>>>>> +
>>>>>>> +       if (!val) {
>>>>>>> +               dev_err(chip->dev, "led-max-microamp
>>>>>>> shouldn't
>>>>>>> be >
>>>>>>> 0\n");
>>>>>>> +               return -EINVAL;
>>>>>>> +       }
>>>>>>> +
>>>>>>> +       val = min_t(u32, val, TORCH_CURRENT_MAX_UA * > led-
>>>>>>>> chan_count);
>>>>>>> +       led->max_torch_current_ma = val / 1000;
>>>>>>> +
>>>>>>> +       if (fwnode_property_present(node, "flash-max-
>>>>>>> microamp")) {
>>>>>>> +               flash->led_cdev.flags |= LED_DEV_CAP_FLASH;
>>>>>>> +               rc = fwnode_property_read_u32(node, >
>>>>>>> "flash-
>>>>>>> max-
>>>>>>> microamp", &val);
>>>>>>> +               if (rc < 0) {
>>>>>>> +                       dev_err(chip->dev, "Get flash-max-
>>>>>>> microamp
>>>>>>>> failed, rc=%d\n", rc);
>>>>>>> +                       returnrc;
>>>>>>> +               }
>>>>>>> +
>>>>>>> +               val = min_t(u32, val, FLASH_CURRENT_MAX_UA
>>>>>>> * >
>>>>>>> led-
>>>>>>>> chan_count);
>>>>>>> +               val = min_t(u32, val,
>>>>>>> FLASH_TOTAL_CURRENT_MAX_UA);
>>>>>>> +               s = &flash->brightness;
>>>>>>> +               s->min = s->step = FLASH_IRES_UA * led-
>>>>>>>> chan_count;
>>>>>>> +               s->max = val;
>>>>>>> +               s->val = min_t(u32, val,
>>>>>>> FLASH_CURRENT_DEFAULT_UA);
>>>>>>> +               led->max_flash_current_ma = val / 1000;
>>>>>>> +               led->flash_current_ma = s->val / 1000;
>>>>>>> +
>>>>>>> +               rc = fwnode_property_read_u32(node, >
>>>>>>> "flash-
>>>>>>> max-
>>>>>>> timeout-us", &val);
>>>>>>> +               if (rc < 0) {
>>>>>>> +                       dev_err(chip->dev, "Get flash-max-
>>>>>>> timeout-
>>>>>>> us > failed, rc=%d\n", rc);
>>>>>>> +                       returnrc;
>>>>>>> +               }
>>>>>>> +
>>>>>>> +               val = min_t(u32, val,
>>>>>>> FLASH_TIMEOUT_MAX_US);
>>>>>>> +               s = &flash->timeout;
>>>>>>> +               s->min = s->step = FLASH_TIMEOUT_STEP_US;
>>>>>>> +               s->val = s->max = val;
>>>>>>> +               led->max_timeout_ms = led->flash_timeout_ms
>>>>>>> =
>>>>>>> val /
>>>>>>>> 1000;
>>>>>>> +
>>>>>>> +               flash->ops = &qcom_flash_ops;
>>>>>>> +       }
>>>>>>> +
>>>>>>> +       flash->led_cdev.brightness_set_blocking = >
>>>>>>> qcom_flash_led_brightness_set;
>>>>>>> +       init_data.fwnode = node;
>>>>>>> +       init_data.devicename = NULL;
>>>>>>> +       init_data.default_label = NULL;
>>>>>>> +       init_data.devname_mandatory = false;
>>>>>>> +       rc = devm_led_classdev_flash_register_ext(parent,
>>>>>>> flash, >
>>>>>>> &init_data);
>>>>>>> +       if (rc < 0) {
>>>>>>> +               dev_err(chip->dev, "Register flash LED
>>>>>>> classdev
>>>>>>>>
>>>>>>> failed, rc=%d\n", rc);
>>>>>>> +               return rc;
>>>>>>> +       }
>>>>>>> +
>>>>>>> +       return qcom_flash_v4l2_init(led, node);
>>>>>>> +}
>>>>>>> +
>>>>>>> +static int qcom_flash_led_probe(struct platform_device
>>>>>>> *pdev)
>>>>>>> +{
>>>>>>> +       struct qcom_flash_chip *chip;
>>>>>>> +       struct qcom_flash_led *led;
>>>>>>> +       struct fwnode_handle *child;
>>>>>>> +       struct device *dev = &pdev->dev;
>>>>>>> +       struct regmap *map;
>>>>>>> +       struct reg_field *regs;
>>>>>>> +       int count, i, rc;
>>>>>>> +       u32 val, reg_base;
>>>>>>> +
>>>>>>> +       chip = devm_kzalloc(dev, sizeof(*chip),
>>>>>>> GFP_KERNEL);
>>>>>>> +       if (!chip)
>>>>>>> +               return -ENOMEM;
>>>>>>> +
>>>>>>> +       map = dev_get_regmap(dev->parent, NULL);
>>>>>>> +       if (!map) {
>>>>>>> +               dev_err(dev, "Failed to get parent
>>>>>>> regmap\n");
>>>>>>> +               return -EINVAL;
>>>>>>> +       }
>>>>>>> +
>>>>>>> +       rc = fwnode_property_read_u32(dev->fwnode, "reg",
>>>>>>> &reg_base);
>>>>>>> +       if (rc < 0) {
>>>>>>> +               dev_err(dev, "Failed to get register base
>>>>>>> address,
>>>>>>>> rc=%d\n", rc);
>>>>>>> +               return rc;
>>>>>>> +       }
>>>>>>> +
>>>>>>> +       rc = regmap_read(map, reg_base + FLASH_TYPE_REG,
>>>>>>> &val);
>>>>>>> +       if (rc < 0) {
>>>>>>> +               dev_err(dev, "Read flash module type
>>>>>>> failed, >
>>>>>>> rc=%d\n", rc);
>>>>>>> +               return rc;
>>>>>>> +       }
>>>>>>> +
>>>>>>> +       if (val != FLASH_TYPE_VAL){
>>>>>>> +               dev_err(dev, "type %#x is not a flash
>>>>>>> module\n", >
>>>>>>> val);
>>>>>>> +               return -ENODEV;
>>>>>>> +       }
>>>>>>> +
>>>>>>> +       rc = regmap_read(map, reg_base + FLASH_SUBTYPE_REG,
>>>>>>> &val);
>>>>>>> +       if (rc < 0) {
>>>>>>> +               dev_err(dev, "Read flash module subtype
>>>>>>> failed,
>>>>>>>>
>>>>>>> rc=%d\n", rc);
>>>>>>> +               return rc;
>>>>>>> +       }
>>>>>>> +
>>>>>>> +       if (val == FLASH_SUBTYPE_3CH_VAL) {
>>>>>>> +               chip->hw_type = QCOM_MVFLASH_3CH;
>>>>>>> +               chip->max_channels = 3;
>>>>>>> +               regs = mvflash_3ch_regs;
>>>>>>> +       } else if (val == FLASH_SUBTYPE_4CH_VAL) {
>>>>>>> +               chip->hw_type = QCOM_MVFLASH_4CH;
>>>>>>> +               chip->max_channels = 4;
>>>>>>> +               regs = mvflash_4ch_regs;
>>>>>>> +       } else {
>>>>>>> +               dev_err(dev, "flash subtype %#x is not yet
>>>>>>>>
>>>>>>> supported\n", val);
>>>>>>> +               return -ENODEV;
>>>>>>> +       }
>>>>>>> +
>>>>>>> +       for (i = 0; i < REG_MAX_COUNT; i++)
>>>>>>> +               regs[i].reg += reg_base;
>>>>>>> +
>>>>>>> +       rc = devm_regmap_field_bulk_alloc(dev, map, chip-
>>>>>>>> r_fields,
>>>>>>>> regs, REG_MAX_COUNT);
>>>>>>> +       if (rc < 0) {
>>>>>>> +               dev_err(dev, "failed to alloc regmap filed,
>>>>>>> rc=%d\n", > rc);
>>>>>>> +               return rc;
>>>>>>> +       }
>>>>>>> +
>>>>>>> +       chip->dev = dev;
>>>>>>> +       platform_set_drvdata(pdev, chip);
>>>>>>> +       mutex_init(&chip->lock);
>>>>>>> +       count = device_get_child_node_count(dev);
>>>>>>> +       if (count == 0 || count > chip->max_channels) {
>>>>>>> +               dev_err(dev, "No child or child count
>>>>>>> exceeds
>>>>>>> %d\n", > chip->max_channels);
>>>>>>> +               return -EINVAL;
>>>>>>> +       }
>>>>>>> +
>>>>>>> +       chip->leds = devm_kcalloc(dev, count, sizeof(*chip-
>>>>>>>> leds),
>>>>>>>> GFP_KERNEL);
>>>>>>> +       if (!chip->leds)
>>>>>>> +               return -ENOMEM;
>>>>>>> +
>>>>>>> +       device_for_each_child_node(dev, child) {
>>>>>>> +               led = &chip->leds[chip->leds_count];
>>>>>>> +               led->chip = chip;
>>>>>>> +               rc = qcom_flash_register_led_device(dev,
>>>>>>> child,
>>>>>>> led);
>>>>>>> +               if (rc < 0)
>>>>>>> +                       goto release;
>>>>>>> +
>>>>>>> +               chip->leds_count++;
>>>>>>> +       }
>>>>>>> +
>>>>>>> +       return 0;
>>>>>>> +release:
>>>>>>> +       while (chip->leds && chip->leds_count--)
>>>>>>> +               v4l2_flash_release(chip->leds[chip-
>>>>>>>> leds_count].v4l2_> flash);
>>>>>>> +       return rc;
>>>>>>> +}
>>>>>>> +
>>>>>>> +static int qcom_flash_led_remove(struct platform_device
>>>>>>> *pdev)
>>>>>>> +{
>>>>>>> +       struct qcom_flash_chip *chip=
>>>>>>> platform_get_drvdata(pdev);
>>>>>>> +
>>>>>>> +       while (chip->leds_count--)
>>>>>>> +               v4l2_flash_release(chip->leds[chip-
>>>>>>>> leds_count].v4l2_> flash);
>>>>>>> +
>>>>>>> +       mutex_destroy(&chip->lock);
>>>>>>> +       return 0;
>>>>>>> +}
>>>>>>> +
>>>>>>> +static const struct of_device_id
>>>>>>> qcom_flash_led_match_table[]
>>>>>>> = {
>>>>>>> +       { .compatible = "qcom,spmi-flash-led" },
>>>>>>> +       { }
>>>>>>> +};
>>>>>>> +
>>>>>>> +static struct platform_driver qcom_flash_led_driver = {
>>>>>>> +       .driver = {
>>>>>>> +               .name = "leds-qcom-flash",
>>>>>>> +               .of_match_table =
>>>>>>> qcom_flash_led_match_table,
>>>>>>> +       },
>>>>>>> +       .probe = qcom_flash_led_probe,
>>>>>>> +       .remove = qcom_flash_led_remove,
>>>>>>> +};
>>>>>>> +
>>>>>>> +module_platform_driver(qcom_flash_led_driver);
>>>>>>> +
>>>>>>> +MODULE_DESCRIPTION("QCOM Flash LED driver");
>>>>>>> +MODULE_LICENSE("GPL");
>>>>>
>>>>> Kind regards,
>>>>> Dylan Van Assche
>>>
>>> Kind regards,
>>> Dylan Van Assche
>>>
> 
> Kind regards,
> Dylan Van Assche
>
  
Dylan Van Assche Nov. 2, 2022, 2:26 p.m. UTC | #10
Hi Fenglin,


On Wed, 2022-11-02 at 19:06 +0800, Fenglin Wu wrote:
> 
> 
> On 2022/11/2 16:14, Dylan Van Assche wrote:
> > 
> > Hi Fenglin,
> > 
> > > Hi Dylan,
> > > 
> > > 
> > > On 2022/11/2 1:39, Dylan Van Assche wrote:
> > > > 
> > > > Hi Fenglin,
> > > > 
> > > > > On 2022/10/31 18:34, Dylan Van Assche wrote:
> > > > > > 
> > > > > > Hi Fenglin,
> > > > > > 
> > > > > > Thanks for submitting these patches! They are really nice!
> > > > > > I tested these patches on an SDM845 based device as the
> > > > > > downstream
> > > > > > driver is the same for the PMI8998 compared to the
> > > > > > mentioned
> > > > > > PMICs
> > > > > > in
> > > > > > this patchseries.
> > > > > > 
> > > > > > Tested-by: Dylan Van Assche <me@dylanvanassche.be> #
> > > > > > sdm845-
> > > > > > shift-
> > > > > > axolotl + pmi8998
> > > > > > 
> > > > > Thanks for testing the patch at your side, Dylan!
> > > > > 
> > > > > > > > Add initial driver to support flash LED module found in
> > > > > > > > Qualcomm
> > > > > > > > Technologies, Inc. PMICs. The flash module can have 3
> > > > > > > > or 4
> > > > > > > > channels
> > > > > > > > and each channel can be controlled indepedently and
> > > > > > > > support
> > > > > > > > full >
> > > > > > > > scale
> > > > > > > > current up to 1.5 A. It also supports connecting two
> > > > > > > > channels >
> > > > > > > > together
> > > > > > > > to supply one LED component with full scale current up
> > > > > > > > to 2
> > > > > > > > A.
> > > > > > > > In >
> > > > > > > > that
> > > > > > > > case, the current will be split on each channel
> > > > > > > > symmetrically
> > > > > > > > and
> > > > > > > > the
> > > > > > > > channels will be enabled and disabled at the same time.
> > > > > > > > 
> > > > > > > > Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
> > > > > > > > Tested-by: Luca Weiss <luca.weiss@fairphone.com> # >
> > > > > > > > sm7225-
> > > > > > > > fairphone-fp4 + pm6150l
> > > > > > > > ---
> > > > > > > >     drivers/leds/flash/Kconfig           |  15 +
> > > > > > > >     drivers/leds/flash/Makefile          |   1 +
> > > > > > > >     drivers/leds/flash/leds-qcom-flash.c | 700 >
> > > > > > > > +++++++++++++++++++++++++++
> > > > > > > >     3 files changed, 716 insertions(+)
> > > > > > > >     create mode 100644 drivers/leds/flash/leds-qcom-
> > > > > > > > flash.c
> > > > > > > > 
> > > > > > > > diff --git a/drivers/leds/flash/Kconfig
> > > > > > > > b/drivers/leds/flash/Kconfig
> > > > > > > > index d3eb689b193c..f36a60409290 100644
> > > > > > > > --- a/drivers/leds/flash/Kconfig
> > > > > > > > +++ b/drivers/leds/flash/Kconfig
> > > > > > > > @@ -61,6 +61,21 @@ config LEDS_MT6360
> > > > > > > >              Independent current sources supply for
> > > > > > > > each
> > > > > > > > flash
> > > > > > > > LED >
> > > > > > > > support torch
> > > > > > > >              and strobe mode.
> > > > > > > >     
> > > > > > > > +config LEDS_QCOM_FLASH
> > > > > > > > +       tristate "LED support for flash module inside
> > > > > > > > Qualcomm
> > > > > > > > > 
> > > > > > > > Technologies, Inc. PMIC"
> > > > > > > > +       depends on MFD_SPMI_PMIC || COMPILE_TEST
> > > > > > > > +       depends on LEDS_CLASS && OF
> > > > > > > > +       depends on V4L2_FLASH_LED_CLASS ||
> > > > > > > > !V4L2_FLASH_LED_CLASS
> > > > > > > > +       select REGMAP
> > > > > > > > +       help
> > > > > > > > +         This option enables support for the flash
> > > > > > > > module
> > > > > > > > found in
> > > > > > > > > Qualcomm
> > > > > > > > +         Technologies, Inc. PMICs. The flash module
> > > > > > > > can
> > > > > > > > have 3
> > > > > > > > or
> > > > > > > > 4 > flash LED
> > > > > > > > +         channels and each channel is programmable to
> > > > > > > > support
> > > > > > > > up
> > > > > > > > to > 1.5 A full
> > > > > > > > +         scale current. It also supports connecting
> > > > > > > > two
> > > > > > > > channels'
> > > > > > > > > output together
> > > > > > > > +         to supply one LED component to achieve
> > > > > > > > current up
> > > > > > > > to
> > > > > > > > 2 A.
> > > > > > > > > In such case,
> > > > > > > > +         the total LED currentwill be split
> > > > > > > > symmetrically
> > > > > > > > on
> > > > > > > > each
> > > > > > > > > channel and
> > > > > > > > +         they will be enabled/disabled at the same
> > > > > > > > time.
> > > > > > > > +
> > > > > > > >     config LEDS_RT4505
> > > > > > > >            tristate "LED support for RT4505 flashlight
> > > > > > > > controller"
> > > > > > > >            depends on I2C && OF
> > > > > > > > diff --git a/drivers/leds/flash/Makefile >
> > > > > > > > b/drivers/leds/flash/Makefile
> > > > > > > > index 0acbddc0b91b..8a60993f1a25 100644
> > > > > > > > --- a/drivers/leds/flash/Makefile
> > > > > > > > +++ b/drivers/leds/flash/Makefile
> > > > > > > > @@ -6,6 +6,7 @@ obj-$(CONFIG_LEDS_AS3645A)      +=
> > > > > > > > leds-
> > > > > > > > as3645a.o
> > > > > > > >     obj-$(CONFIG_LEDS_KTD2692)     += leds-ktd2692.o
> > > > > > > >     obj-$(CONFIG_LEDS_LM3601X)     += leds-lm3601x.o
> > > > > > > >     obj-$(CONFIG_LEDS_MAX77693)    += leds-max77693.o
> > > > > > > > +obj-$(CONFIG_LEDS_QCOM_FLASH)  += leds-qcom-flash.o
> > > > > > > >     obj-$(CONFIG_LEDS_RT4505)      += leds-rt4505.o
> > > > > > > >     obj-$(CONFIG_LEDS_RT8515)      += leds-rt8515.o
> > > > > > > >     obj-$(CONFIG_LEDS_SGM3140)     += leds-sgm3140.o
> > > > > > > > diff --git a/drivers/leds/flash/leds-qcom-flash.c >
> > > > > > > > b/drivers/leds/flash/leds-qcom-flash.c
> > > > > > > > new file mode 100644
> > > > > > > > index 000000000000..a9fcf61600c3
> > > > > > > > --- /dev/null
> > > > > > > > +++ b/drivers/leds/flash/leds-qcom-flash.c
> > > > > > > > @@ -0,0 +1,700 @@
> > > > > > > > +// SPDX-License-Identifier: GPL-2.0-only
> > > > > > > > +/*
> > > > > > > > + * Copyright (c) 2022 Qualcomm Innovation Center, Inc.
> > > > > > > > All
> > > > > > > > rights
> > > > > > > > > reserved.
> > > > > > > > + */
> > > > > > > > +
> > > > > > > > +#include <linux/bitfield.h>
> > > > > > > > +#include <linux/bits.h>
> > > > > > > > +#include <linux/leds.h>
> > > > > > > > +#include <linux/led-class-flash.h>
> > > > > > > > +#include <linux/module.h>
> > > > > > > > +#include <linux/platform_device.h>
> > > > > > > > +#include <linux/property.h>
> > > > > > > > +#include <linux/regmap.h>
> > > > > > > > +#include <media/v4l2-flash-led-class.h>
> > > > > > > > +
> > > > > > > > +/* registers definitions */
> > > > > > > > +#define FLASH_TYPE_REG                 0x04
> > > > > > > > +#define FLASH_TYPE_VAL                 0x18
> > > > > > > > +
> > > > > > > > +#define FLASH_SUBTYPE_REG              0x05
> > > > > > > > +#define FLASH_SUBTYPE_3CH_VAL          0x04
> > > > > > 
> > > > > > PMI8998 has also a 3 channel flash subtype, but reports
> > > > > > 0x03 as
> > > > > > subtype. The driver won't probe because of this since the
> > > > > > subtype
> > > > > > did
> > > > > > not match. Changing this value to 0x03 made this driver
> > > > > > work on
> > > > > > SDM845
> > > > > > based device as well with PMI8998. Would you consider
> > > > > > supporting
> > > > > > SDM845+PMI8998 as well?
> > > > > > 
> > > > > I just double checked, flash module in PMI8998 (with subtype
> > > > > 0x3)
> > > > > has
> > > > > very similar register definition as the flash module in
> > > > > PM8150C
> > > > > (with
> > > > > subtype 0x4) that the driver is intended to support, it's
> > > > > good
> > > > > know
> > > > > that
> > > > > it's 99% work.
> > > > > I can add the 0x3 subtype support but the only problem is I
> > > > > couldn't
> > > > > find a device with PMI8998 to test it out. Would it be good
> > > > > if I
> > > > > add
> > > > > the
> > > > > support and rely on your test result?
> > > > 
> > > > Sure! I already have a branch locally to test your patches,
> > > > happy
> > > > to
> > > > help! I have an SDM845 device here with PMI8998 with 2 LEDs:
> > > > cold
> > > > and
> > > > warm white.
> > > > 
> > > Thank you for the help!
> > > > > 
> > > > > > > > +#define FLASH_SUBTYPE_4CH_VAL          0x07
> > > > > > > > +
> > > > > > > > +#define FLASH_TIMER_EN_BIT             BIT(7)
> > > > > > > > +#define FLASH_TIMER_VAL_MASK           GENMASK(6, 0)
> > > > > > > > +#define FLASH_TIMER_STEP_MS            10
> > > > > > > > +
> > > > > > > > +#define FLASH_STROBE_HW_SW_SEL_BIT     BIT(2)
> > > > > > > > +#define SW_STROBE_VAL                  0
> > > > > > > > +#define HW_STROBE_VAL                  1
> > > > > > > > +#define FLASH_HW_STROBE_TRIGGER_SEL_BIT        BIT(1)
> > > > > > > > +#define STROBE_LEVEL_TRIGGER_VAL       0
> > > > > > > > +#define STROBE_EDGE_TRIGGER_VAL                1
> > > > > > > > +#define FLASH_STROBE_POLARITY_BIT      BIT(0)
> > > > > > > > +#define STROBE_ACTIVE_HIGH_VAL         1
> > > > > > > > +
> > > > > > > > +#define FLASH_IRES_MASK_4CH            BIT(0)
> > > > > > > > +#define FLASH_IRES_MASK_3CH            GENMASK(1, 0)
> > > > > > > > +#define FLASH_IRES_12P5MA_VAL          0
> > > > > > > > +#define FLASH_IRES_5MA_VAL_4CH         1
> > > > > > > > +#define FLASH_IRES_5MA_VAL_3CH         3
> > > > > > > > +
> > > > > > > > +/* constants */
> > > > > > > > +#define FLASH_CURRENT_MAX_UA           1500000
> > > > > > > > +#define TORCH_CURRENT_MAX_UA           500000
> > > > > > > > +#define FLASH_TOTAL_CURRENT_MAX_UA     2000000
> > > > > > > > +#define FLASH_CURRENT_DEFAULT_UA       1000000
> > > > > > > > +#define TORCH_CURRENT_DEFAULT_UA       200000
> > > > > > > > +
> > > > > > > > +#define TORCH_IRES_UA                  5000
> > > > > > > > +#define FLASH_IRES_UA                  12500
> > > > > > > > +
> > > > > > > > +#define FLASH_TIMEOUT_MAX_US           1280000
> > > > > > > > +#define FLASH_TIMEOUT_STEP_US          10000
> > > > > > > > +
> > > > > > > > +enum hw_type {
> > > > > > > > +       QCOM_MVFLASH_3CH,
> > > > > > > > +       QCOM_MVFLASH_4CH,
> > > > > > > > +};
> > > > > > > > +
> > > > > > > > +enum led_mode {
> > > > > > > > +       FLASH_MODE,
> > > > > > > > +       TORCH_MODE,
> > > > > > > > +};
> > > > > > > > +
> > > > > > > > +enum led_strobe {
> > > > > > > > +       SW_STROBE,
> > > > > > > > +       HW_STROBE,
> > > > > > > > +};
> > > > > > > > +
> > > > > > > > +enum {
> > > > > > > > +       REG_STATUS1,
> > > > > > > > +       REG_STATUS2,
> > > > > > > > +       REG_STATUS3,
> > > > > > > > +       REG_CHAN_TIMER,
> > > > > > > > +       REG_ITARGET,
> > > > > > > > +       REG_MODULE_EN,
> > > > > > > > +       REG_IRESOLUTION,
> > > > > > > > +       REG_CHAN_STROBE,
> > > > > > > > +       REG_CHAN_EN,
> > > > > > > > +       REG_MAX_COUNT,
> > > > > > > > +};
> > > > > > > > +
> > > > > > > > +struct reg_field mvflash_3ch_regs[REG_MAX_COUNT] = {
> > > > > > > > +       REG_FIELD(0x08, 0, 7),                  /*
> > > > > > > > status1      */
> > > > > > > > +       REG_FIELD(0x09, 0, 7),                  /*
> > > > > > > > status2      */
> > > > > > > > +       REG_FIELD(0x0a, 0, 7),                  /*
> > > > > > > > status3      */
> > > > > > > > +       REG_FIELD_ID(0x40, 0, 7, 3, 1),         /*
> > > > > > > > chan_timer   */
> > > > > > > > +       REG_FIELD_ID(0x43, 0, 6, 3, 1),         /*
> > > > > > > > itarget      */
> > > > > > > > +       REG_FIELD(0x46, 7, 7),                  /*
> > > > > > > > module_en    */
> > > > > > > > +       REG_FIELD(0x47, 0, 5),                  /*
> > > > > > > > iresolution  */
> > > > > > > > +       REG_FIELD_ID(0x49, 0, 2, 3, 1),         /*
> > > > > > > > chan_strobe  */
> > > > > > > > +       REG_FIELD(0x4c, 0, 2),                  /*
> > > > > > > > chan_en      */
> > > > > > > > +};
> > > > > > 
> > > > > > These registers map perfectly for SDM845 with PMI8998 as
> > > > > > well,
> > > > > > adding
> > > > > > support for this subtype (0x03) would be great.
> > > > > > 
> > > > > > > > +
> > > > > > > > +struct reg_field mvflash_4ch_regs[REG_MAX_COUNT] = {
> > > > > > > > +       REG_FIELD(0x06, 0, 7),                  /*
> > > > > > > > status1      */
> > > > > > > > +       REG_FIELD(0x07, 0, 6),                  /*
> > > > > > > > status2      */
> > > > > > > > +       REG_FIELD(0x09, 0, 7),                  /*
> > > > > > > > status3      */
> > > > > > > > +       REG_FIELD_ID(0x3e, 0, 7, 4, 1),         /*
> > > > > > > > chan_timer   */
> > > > > > > > +       REG_FIELD_ID(0x42, 0, 6, 4, 1),         /*
> > > > > > > > itarget      */
> > > > > > > > +       REG_FIELD(0x46, 7, 7),                  /*
> > > > > > > > module_en    */
> > > > > > > > +       REG_FIELD(0x49, 0, 3),                  /*
> > > > > > > > iresolution  */
> > > > > > > > +       REG_FIELD_ID(0x4a, 0, 6, 4, 1),         /*
> > > > > > > > chan_strobe  */
> > > > > > > > +       REG_FIELD(0x4e, 0, 3),                  /*
> > > > > > > > chan_en      */
> > > > > > > > +};
> > > > > > > > +
> > > > > > > > +struct qcom_flash_led {
> > > > > > > > +       struct qcom_flash_chip          *chip;
> > > > > > > > +       struct led_classdev_flash       flash;
> > > > > > > > +       struct v4l2_flash               *v4l2_flash;
> > > > > > > > +       u32                             max_flash_curre
> > > > > > > > nt_m
> > > > > > > > a;
> > > > > > > > +       u32                             max_torch_curre
> > > > > > > > nt_m
> > > > > > > > a;
> > > > > > > > +       u32                             max_timeout_ms;
> > > > > > > > +       u32                             flash_current_m
> > > > > > > > a;
> > > > > > > > +       u32                             flash_timeout_m
> > > > > > > > s;
> > > > > > > > +       u8                              *chan_id;
> > > > > > > > +       u8                              chan_count;
> > > > > > > > +       bool                            enabled;
> > > > > > > > +};
> > > > > > > > +
> > > > > > > > +struct qcom_flash_chip {
> > > > > > > > +       struct qcom_flash_led   *leds;
> > > > > > > > +       struct regmap_field    
> > > > > > > > *r_fields[REG_MAX_COUNT];
> > > > > > > > +       struct device           *dev;
> > > > > > > > +       struct mutex            lock;
> > > > > > > > +       enum hw_type            hw_type;
> > > > > > > > +       u8                      leds_count;
> > > > > > > > +       u8                      max_channels;
> > > > > > > > +       u8                      chan_en_bits;
> > > > > > > > +};
> > > > > > > > +
> > > > > > > > +static int set_flash_module_en(struct qcom_flash_led
> > > > > > > > *led,
> > > > > > > > bool
> > > > > > > > en)
> > > > > > > > +{
> > > > > > > > +       struct qcom_flash_chip *chip= led->chip;
> > > > > > > > +       u8 led_mask = 0, val;
> > > > > > > > +       int i, rc;
> > > > > > > > +
> > > > > > > > +       for (i = 0; i < led->chan_count; i++)
> > > > > > > > +               led_mask |= BIT(led->chan_id[i] - 1);
> > > > > > > > +
> > > > > > > > +       mutex_lock(&chip->lock);
> > > > > > > > +       if (en)
> > > > > > > > +               chip->chan_en_bits |= led_mask;
> > > > > > > > +       else
> > > > > > > > +               chip->chan_en_bits &= ~led_mask;
> > > > > > > > +
> > > > > > > > +       val = !!chip->chan_en_bits;
> > > > > > > > +       rc = regmap_field_write(chip-
> > > > > > > > > r_fields[REG_MODULE_EN],
> > > > > > > > val);
> > > > > > > > +       if (rc < 0)
> > > > > > > > +               dev_err(chip->dev, "write module_en
> > > > > > > > failed,
> > > > > > > > rc=%d\n", > rc);
> > > > > > > > +       mutex_unlock(&chip->lock);
> > > > > > > > +
> > > > > > > > +       return rc;
> > > > > > > > +}
> > > > > > > > +
> > > > > > > > +static int set_flash_current(struct qcom_flash_led
> > > > > > > > *led,
> > > > > > > > u32 >
> > > > > > > > current_ma, enum led_mode mode)
> > > > > > > > +{
> > > > > > > > +       struct qcom_flash_chip *chip= led->chip;
> > > > > > > > +       u32 itarg_ua = current_ma * 1000 / led-
> > > > > > > > >chan_count
> > > > > > > > + 1;
> > > > > > > > +       u32 ires_ua = (mode ==FLASH_MODE) ?
> > > > > > > > FLASH_IRES_UA :
> > > > > > > > > 
> > > > > > > > TORCH_IRES_UA;
> > > > > > > > +       u8 val, shift, ires_mask =0, ires_val = 0,
> > > > > > > > chan_id;
> > > > > > > > +       int i, rc;
> > > > > > > > +
> > > > > > > > +       /*
> > > > > > > > +        * Split the current across the channels and
> > > > > > > > set
> > > > > > > > the
> > > > > > > > +        * IRESOLUTION and ITARGET registers
> > > > > > > > accordingly.
> > > > > > > > +        */
> > > > > > > > +       for (i = 0; i < led->chan_count; i++) {
> > > > > > > > +               chan_id = led->chan_id[i];
> > > > > > > > +               if (itarg_ua < ires_ua)
> > > > > > > > +                       val = 0;
> > > > > > > > +               else
> > > > > > > > +                       val = itarg_ua / ires_ua - 1;
> > > > > > > > +
> > > > > > > > +               rc = regmap_fields_write(chip-
> > > > > > > > > r_fields[REG_ITARGET], > chan_id - 1, val);
> > > > > > > > +               if (rc < 0)
> > > > > > > > +                       returnrc;
> > > > > > > > +
> > > > > > > > +               if (chip->hw_type == QCOM_MVFLASH_3CH)
> > > > > > > > {
> > > > > > > > +                       shift = (chan_id - 1) * 2;
> > > > > > > > +                       ires_mask |=
> > > > > > > > FLASH_IRES_MASK_3CH <<
> > > > > > > > shift;
> > > > > > > > +                       ires_val |= ((mode ==
> > > > > > > > FLASH_MODE) ?
> > > > > > > > +                               (FLASH_IRES_12P5MA_VAL
> > > > > > > > <<
> > > > > > > > shift) :
> > > > > > > > +                               (FLASH_IRES_5MA_VAL_3CH
> > > > > > > > <<
> > > > > > > > shift));
> > > > > > > > +               } else if (chip->hw_type ==
> > > > > > > > QCOM_MVFLASH_4CH) {
> > > > > > > > +                       shift = chan_id - 1;
> > > > > > > > +                       ires_mask |=
> > > > > > > > FLASH_IRES_MASK_4CH <<
> > > > > > > > shift;
> > > > > > > > +                       ires_val |= ((mode ==
> > > > > > > > FLASH_MODE) ?
> > > > > > > > +                               (FLASH_IRES_12P5MA_VAL
> > > > > > > > <<
> > > > > > > > shift) :
> > > > > > > > +                               (FLASH_IRES_5MA_VAL_4CH
> > > > > > > > <<
> > > > > > > > shift));
> > > > > > > > +               }
> > > > > > > > +       }
> > > > > > > > +
> > > > > > > > +       return > regmap_field_update_bits(chip-
> > > > > > > > > r_fields[REG_IRESOLUTION], ires_mask, > ires_val);
> > > > > > > > +}
> > > > > > > > +
> > > > > > > > +static int set_flash_timeout(struct qcom_flash_led
> > > > > > > > *led,
> > > > > > > > u32 >
> > > > > > > > timeout_ms)
> > > > > > > > +{
> > > > > > > > +       struct qcom_flash_chip *chip= led->chip;
> > > > > > > > +       u8 val, chan_id;
> > > > > > > > +       int rc, i;
> > > > > > > > +
> > > > > > > > +       /* set SAFETY_TIMER for all the channels
> > > > > > > > connected
> > > > > > > > to
> > > > > > > > the >
> > > > > > > > same LED */
> > > > > > > > +       timeout_ms = min_t(u32, timeout_ms, led-
> > > > > > > > > max_timeout_ms);
> > > > > > > > +       for (i = 0; i < led->chan_count; i++) {
> > > > > > > > +               chan_id = led->chan_id[i];
> > > > > > > > +               val = timeout_ms / FLASH_TIMER_STEP_MS;
> > > > > > > > +               val = clamp_t(u8, val, 0,
> > > > > > > > FLASH_TIMER_VAL_MASK);
> > > > > > > > +               if (timeout_ms)
> > > > > > > > +                       val |= FLASH_TIMER_EN_BIT;
> > > > > > > > +
> > > > > > > > +               rc = > regmap_fields_write(chip-
> > > > > > > > > r_fields[REG_CHAN_TIMER], chan_id - 1, > val);
> > > > > > > > +               if (rc < 0)
> > > > > > > > +                       returnrc;
> > > > > > > > +       }
> > > > > > > > +
> > > > > > > > +       return 0;
> > > > > > > > +}
> > > > > > > > +
> > > > > > > > +static int set_flash_strobe(struct qcom_flash_led
> > > > > > > > *led,
> > > > > > > > enum >
> > > > > > > > led_strobe strobe, bool state)
> > > > > > > > +{
> > > > > > > > +       struct qcom_flash_chip *chip= led->chip;
> > > > > > > > +       u8 mask, val, chan_id = 0,chan_mask = 0;
> > > > > > > > +       int rc, i;
> > > > > > > > +
> > > > > > > > +       /* Set SW strobe config for all channels
> > > > > > > > connected
> > > > > > > > to
> > > > > > > > the
> > > > > > > > LED > */
> > > > > > > > +       for (i = 0; i < led->chan_count; i++) {
> > > > > > > > +               chan_id = led->chan_id[i];
> > > > > > > > +               if (strobe == SW_STROBE)
> > > > > > > > +                       val =
> > > > > > > > FIELD_PREP(FLASH_STROBE_HW_SW_SEL_BIT, >
> > > > > > > > SW_STROBE_VAL);
> > > > > > > > +               else
> > > > > > > > +                       val =
> > > > > > > > FIELD_PREP(FLASH_STROBE_HW_SW_SEL_BIT, >
> > > > > > > > HW_STROBE_VAL);
> > > > > > > > +
> > > > > > > > +               val |=
> > > > > > > > FIELD_PREP(FLASH_HW_STROBE_TRIGGER_SEL_BIT,
> > > > > > > > > STROBE_LEVEL_TRIGGER_VAL) |
> > > > > > > > +                       FIELD_PREP(FLASH_STROBE_POLARIT
> > > > > > > > Y_BI
> > > > > > > > T, >
> > > > > > > > STROBE_ACTIVE_HIGH_VAL);
> > > > > > > > +               rc = > regmap_fields_write(chip-
> > > > > > > > > r_fields[REG_CHAN_STROBE], chan_id - 1, > val);
> > > > > > > > +               if (rc < 0)
> > > > > > > > +                       returnrc;
> > > > > > > > +
> > > > > > > > +               chan_mask |= BIT(chan_id - 1);
> > > > > > > > +       }
> > > > > > > > +
> > > > > > > > +       /* enable/disable flash channels */
> > > > > > > > +       mask = chan_mask;
> > > > > > > > +       val = state ? mask : 0;
> > > > > > > > +       rc = regmap_field_update_bits(chip-
> > > > > > > > > r_fields[REG_CHAN_EN],
> > > > > > > > > mask, val);
> > > > > > > > +       if (rc < 0)
> > > > > > > > +               return rc;
> > > > > > > > +
> > > > > > > > +       led->enabled = state;
> > > > > > > > +       return 0;
> > > > > > > > +}
> > > > > > > > +
> > > > > > > > +static int qcom_flash_brightness_set(struct
> > > > > > > > led_classdev_flash
> > > > > > > > > 
> > > > > > > > *fled_cdev, u32 brightness)
> > > > > > > > +{
> > > > > > > > +       struct qcom_flash_led *led =
> > > > > > > > container_of(fled_cdev,
> > > > > > > > struct
> > > > > > > > > qcom_flash_led, flash);
> > > > > > > > +
> > > > > > > > +       led->flash_current_ma = min_t(u32, led-
> > > > > > > > > max_flash_current_ma, > brightness / 1000);
> > > > > > > > +       return 0;
> > > > > > > > +}
> > > > > > 
> > > > > > This doesn't seem to work in torch mode for me on PMI8998.
> > > > > > If
> > > > > > the
> > > > > > brightness is 0, the torch is OFF as expected, but when the
> > > > > > torch
> > > > > > is
> > > > > > ON, you cannot control the brightness. The brightness is
> > > > > > the
> > > > > > same
> > > > > > for
> > > > > > [1, 255]. If the hardware cannot change the brightness in
> > > > > > torch
> > > > > > mode,
> > > > > > it would be nice to report a max_brightness value of 1
> > > > > > instead
> > > > > > of
> > > > > > 255
> > > > > > for userspace. This could be a limitation of the PMI8998,
> > > > > > not
> > > > > > sure.
> > > > > > Do you have any insights here? This driver is already 99%
> > > > > > working
> > > > > > for
> > > > > > SDM845+PMI8998.
> > > > > > 
> > > > > > Flash mode works great, timeout & brightness can be
> > > > > > configured
> > > > > > just
> > > > > > fine.
> > > > > > 
> > > > > 
> > > > > Here, function qcom_flash_brightness_set() is used for
> > > > > setting
> > > > > brightness in flash mode and it was supposed to be working
> > > > > with
> > > > > following commands combination:
> > > > >           echo xxx > flash_brightness
> > > > >           echo 1 > flash_strobe  (you will need to toggle
> > > > > flash_strobe
> > > > > when you
> > > > > enabling it again)
> > > > > 
> > > > > Can you check if you can see the brightness change in flash
> > > > > mode
> > > > > when
> > > > > you updating the flash_brightness value with these commands?
> > > > > 
> > > > > You can echo any value between [0, max_flash_brightness] into
> > > > > the
> > > > > flash_brightness, there is a "max_flash_brightness" sysfs
> > > > > node
> > > > > and
> > > > > the
> > > > > value comes from DT property "flash-max-microamp", ex. my
> > > > > dtsi
> > > > > node
> > > > > has
> > > > > "flash-max-microamp = <2000000>;" defined so I am having
> > > > > following
> > > > > value
> > > > > for max_flash_brightness:
> > > > > 
> > > > > kalama:/sys/class/leds/white:flash-0 # cat
> > > > > max_flash_brightness
> > > > > 2000000
> > > > > 
> > > > > And by default flash mode uses 12500uA resolution so you
> > > > > won't
> > > > > see
> > > > > brightness change when you update it with values between [1,
> > > > > 12500].
> > > > 
> > > > Yes, this works perfectly fine on PMI8998. I can adjust the
> > > > flash
> > > > brightness and flash timeout perfectly.
> > > > 
> > > > > 
> > > > > If you want to update the brightness for torch node, you can
> > > > > directly
> > > > > update the "brightness" node with values between [0, 255],
> > > > > and
> > > > > it's
> > > > > mapping to the torch current between [0, led-max-microamp].
> > > > > "led-max-microamp" is also has value coming from the DT
> > > > > property.
> > > > > 
> > > > > This worked at my side on both pm8150C and pm8550.I think it
> > > > > should
> > > > > work
> > > > > on PMI8998 as well because the flash module in it is very
> > > > > similar
> > > > > to
> > > > > the
> > > > > one in PM8150c. Let me know if you still see such issues at
> > > > > your
> > > > > side.
> > > > > Thanks
> > > > 
> > > > Only here I have an issue with PMI8998: the "brightness" nodes
> > > > should
> > > > change the brightness of the torch, but it doesn't make a
> > > > difference
> > > > here. When I do:
> > > > 
> > > > - echo 0 > brightness --> LED turns OFF
> > > > - echo 255 > brightness --> LED turns ON
> > > > - echo 100 > brightness --> LED is still ON, but brightness is
> > > > the
> > > > same
> > > > as with 255.
> > > > 
> > > > Could it be that PMI8998 is slightly different here than with
> > > > PM8150c
> > > > for example? Maybe it doesn't support brightness for torch?
> > > > 
> > > > Here's my DTS:
> > > > 
> > > > *PMI8998*
> > > > 
> > > > pmi8998_flash: led-controller@d300 {
> > > >          compatible = "qcom,pm6150l-flash-led", "qcom,spmi-
> > > > flash-
> > > > led";
> > > >          reg = <0xd300>;
> > > >          status = "disabled";
> > > > };
> > > > 
> > > > *SDM845 SHIFT axolotl*
> > > > 
> > > > &pmi8998_flash {
> > > >          status = "okay";
> > > > 
> > > >          led-0 {
> > > >                  function = LED_FUNCTION_FLASH;
> > > >                  color = <LED_COLOR_ID_WHITE>;
> > > >                  led-sources = <1>;
> > > >                  led-max-microamp = <180000>;
> > > >                  flash-max-microamp = <1000000>;
> > > >                  flash-max-timeout-us = <1280000>;
> > > >          };
> > > > 
> > > >          led-1 {
> > > >                  function = LED_FUNCTION_FLASH;
> > > >                  color = <LED_COLOR_ID_YELLOW>;
> > > >                  led-sources = <2>;
> > > >                  led-max-microamp = <180000>;
> > > >                  flash-max-microamp = <1000000>;
> > > >                  flash-max-timeout-us = <1280000>;
> > > >          };
> > > > };
> > > > 
> > > Thank you for getting back all the details. The devicetree node
> > > looks
> > > good to me.
> > > 
> > > I checked again and confirmed that the flash modules in PMI8998
> > > and
> > > PM8150C have the same register definition for ITARGETx (0xD343 +
> > > x)
> > > and
> > > IRESOLUTION (0xD347), these are the only 2 settings would impact
> > > LED
> > > brightness, and in torch mode, IRESOLUTION is fixed to 5mA and
> > > only
> > > ITARGET is updated accordingly.
> > > 
> > > I updated my workspace to use the same current for torch mode as
> > > your
> > > settings in devicetree and tried again on my PM8150C device,I
> > > could
> > > notice the brightness change when echoing different values to the
> > > brightness sysfs node, however, when I updating values between
> > > 255
> > > and
> > > 200, it wasn't a very noticeable brightness change with naked
> > > eys,
> > > but I
> > > could see the ITRAGETx register changed accordingly when reading
> > > its
> > > value back from the regmap debugfs node.
> > > 
> > > Can you try the same and see if the register got updated
> > > accordingly
> > > when you updating brightness values? If yes, I would wonder if
> > > the
> > > LED
> > > component on your device has upper current limit in torch mode
> > > close
> > > to
> > > (100 / 255 ) * 180mA so you that you can't observe the brightness
> > > change
> > > when updating between 100 to 255. Another easier thing to try,
> > > can
> > > you
> > > echo a lower brightness value, such as 10, to see if you can
> > > notice
> > > the
> > > brightness change?
> > > 
> > 
> > Aha! It does seem to work partially!
> > 
> > I tried it with brightness 0 --> 255 --> 1. This order keeps the
> > highest brightness at all times, matching 255. The other way
> > around: 0
> > --> 1 --> 255 keeps the lowest brightness, matching 1.
> > Changing the brightness only works if the LED was turned OFF first:
> > 
> > 0 --> 255 --> 0 --> 1
> > 0 --> 1 --> 0 --> 255
> > 
> > both work fine, verified it with the following shell commands
> > (assumed
> > that the LED was turned OFF to start):
> > 
> > echo 1 > brightness && sleep 3 && echo 0 > brightness && echo 255 >
> > brightness
> > echo 255 > brightness && sleep 3 &&  echo 0 > brightness && echo 1
> > >
> > brightness
> > 
> > Maybe a register needs to be reset when the brightness changes?
> > 
> 
> Hi Dylan,
> 
> Would you mind to help me testing this small change on PMI8998? It 
> simply toggles the CHANNEL_EN bit when updating LED brightness. If it
> works, I will add it specifically for PMI8998 in patch v5.
> 
> @@ -241,8 +243,21 @@ static int set_flash_strobe(struct
> qcom_flash_led 
> *led, enum led_strobe s
> trobe,
>                  chan_mask |= BIT(chan_id - 1);
>          }
> 
> -       /* enable/disable flash channels */
>          mask = chan_mask;
> +       /*
> +        * For flash module inside PMI8998, if strobe(true) is called
> when
> +        * the LED is already enabled, disable the channel 1st and
> then
> +        * enable it again.  This could happen when updating LED
> brightness
> +        * after LED is turned on.
> +        */
> +       if (led->enabled && (led->enabled == state)) {
> +               rc = 
> regmap_field_update_bits(chip->r_fields[REG_CHAN_EN], mask, 0);
> +               if (rc < 0)
> +                       return rc;
> +       }
> +
> +       /* enable/disable flash channels */
>          val = state ? mask : 0;
>          rc = regmap_field_update_bits(chip->r_fields[REG_CHAN_EN], 
> mask, val);
>          if (rc < 0)
> 
> Thanks
> Fenglin Wu

With this change I can indeed change the brightness.
However, it works now 50% of the time:

- echo 255 > brightness --> LED turns ON, max brightness: 255
- echo 1 > brightness --> LED turns OFF
- echo 1 > brightness --> LED turns ON, min brightness: 1

This behavior didn't occur before I applied this change.
I had a look at the change but I cannot really pinpoint why this is
happening...

Kind regards,
Dylan Van Assche

> 
> > > > 
> > > > > 
> > > > > > > > +
> > > > > > > > +static int qcom_flash_timeout_set(struct
> > > > > > > > led_classdev_flash >
> > > > > > > > *fled_cdev, u32 timeout)
> > > > > > > > +{
> > > > > > > > +       struct qcom_flash_led *led =
> > > > > > > > container_of(fled_cdev,
> > > > > > > > struct
> > > > > > > > > qcom_flash_led, flash);
> > > > > > > > +
> > > > > > > > +       led->flash_timeout_ms = timeout / 1000;
> > > > > > > > +       return 0;
> > > > > > > > +}
> > > > > > > > +
> > > > > > > > +static int qcom_flash_strobe_set(struct
> > > > > > > > led_classdev_flash
> > > > > > > > > 
> > > > > > > > *fled_cdev, bool state)
> > > > > > > > +{
> > > > > > > > +       struct qcom_flash_led *led =
> > > > > > > > container_of(fled_cdev,
> > > > > > > > struct
> > > > > > > > > qcom_flash_led, flash);
> > > > > > > > +       int rc;
> > > > > > > > +
> > > > > > > > +       rc = set_flash_current(led, led-
> > > > > > > > >flash_current_ma,
> > > > > > > > > 
> > > > > > > > FLASH_MODE);
> > > > > > > > +       if (rc < 0)
> > > > > > > > +               return rc;
> > > > > > > > +
> > > > > > > > +       rc = set_flash_timeout(led, led-
> > > > > > > > >flash_timeout_ms);
> > > > > > > > +       if (rc < 0)
> > > > > > > > +               return rc;
> > > > > > > > +
> > > > > > > > +       rc = set_flash_module_en(led, state);
> > > > > > > > +       if (rc < 0)
> > > > > > > > +               return rc;
> > > > > > > > +
> > > > > > > > +       return set_flash_strobe(led,SW_STROBE, state);
> > > > > > > > +}
> > > > > > > > +
> > > > > > > > +static int qcom_flash_strobe_get(struct
> > > > > > > > led_classdev_flash
> > > > > > > > > 
> > > > > > > > *fled_cdev, bool *state)
> > > > > > > > +{
> > > > > > > > +       struct qcom_flash_led *led =
> > > > > > > > container_of(fled_cdev,
> > > > > > > > struct
> > > > > > > > > qcom_flash_led, flash);
> > > > > > > > +
> > > > > > > > +       *state = led->enabled;
> > > > > > > > +       return 0;
> > > > > > > > +}
> > > > > > > > +
> > > > > > > > +static int qcom_flash_fault_get(struct
> > > > > > > > led_classdev_flash
> > > > > > > > > 
> > > > > > > > *fled_cdev, u32 *fault)
> > > > > > > > +{
> > > > > > > > +       struct qcom_flash_led *led =
> > > > > > > > container_of(fled_cdev,
> > > > > > > > struct
> > > > > > > > > qcom_flash_led, flash);
> > > > > > > > +       struct qcom_flash_chip *chip= led->chip;
> > > > > > > > +       u8 shift, chan_id = 0, chan_mask = 0;
> > > > > > > > +       u8 ot_mask = 0, oc_mask = 0, uv_mask = 0;
> > > > > > > > +       u32 val, fault_sts = 0;
> > > > > > > > +       int i, rc;
> > > > > > > > +
> > > > > > > > +       rc = regmap_field_read(chip-
> > > > > > > > >r_fields[REG_STATUS1],
> > > > > > > > &val);
> > > > > > > > +       if (rc < 0)
> > > > > > > > +               return rc;
> > > > > > > > +
> > > > > > > > +       for (i = 0; i < led->chan_count; i++) {
> > > > > > > > +               chan_id = led->chan_id[i];
> > > > > > > > +               shift = (chan_id - 1) * 2;
> > > > > > > > +               if (val & BIT(shift))
> > > > > > > > +                       fault_sts |=
> > > > > > > > LED_FAULT_SHORT_CIRCUIT;
> > > > > > > > +               chan_mask |= BIT(chan_id - 1);
> > > > > > > > +       }
> > > > > > > > +
> > > > > > > > +       rc = regmap_field_read(chip-
> > > > > > > > >r_fields[REG_STATUS2],
> > > > > > > > &val);
> > > > > > > > +       if (rc < 0)
> > > > > > > > +               return rc;
> > > > > > > > +
> > > > > > > > +       if (chip->hw_type == QCOM_MVFLASH_3CH) {
> > > > > > > > +               ot_mask = 0x0f;
> > > > > > > > +               oc_mask = 0xe0;
> > > > > > > > +               uv_mask = 0x10;
> > > > > > > > +       } else if (chip->hw_type == QCOM_MVFLASH_4CH) {
> > > > > > > > +               ot_mask = 0x70;
> > > > > > > > +               oc_mask = 0x0e;
> > > > > > > > +               uv_mask = 0x01;
> > > > > > > > +       }
> > > > > > > > +
> > > > > > > > +       if (val & ot_mask)
> > > > > > > > +               fault_sts |=
> > > > > > > > LED_FAULT_OVER_TEMPERATURE;
> > > > > > > > +       if (val & oc_mask)
> > > > > > > > +               fault_sts |= LED_FAULT_OVER_CURRENT;
> > > > > > > > +       if (val & uv_mask)
> > > > > > > > +               fault_sts |= LED_FAULT_INPUT_VOLTAGE;
> > > > > > > > +
> > > > > > > > +       rc = regmap_field_read(chip-
> > > > > > > > >r_fields[REG_STATUS3],
> > > > > > > > &val);
> > > > > > > > +       if (rc < 0)
> > > > > > > > +               return rc;
> > > > > > > > +
> > > > > > > > +       if (chip->hw_type == QCOM_MVFLASH_3CH) {
> > > > > > > > +               if (val & chan_mask)
> > > > > > > > +                       fault_sts |= LED_FAULT_TIMEOUT;
> > > > > > > > +       } else if (chip->hw_type == QCOM_MVFLASH_4CH) {
> > > > > > > > +               for (i = 0; i < led->chan_count; i++) {
> > > > > > > > +                       chan_id = led->chan_id[i];
> > > > > > > > +                       shift = (chan_id - 1) * 2;
> > > > > > > > +                       if (val & BIT(shift))
> > > > > > > > +                               fault_sts |=
> > > > > > > > LED_FAULT_TIMEOUT;
> > > > > > > > +               }
> > > > > > > > +       }
> > > > > > > > +
> > > > > > > > +       *fault = fault_sts;
> > > > > > > > +       return 0;
> > > > > > > > +}
> > > > > > > > +
> > > > > > > > +static int qcom_flash_led_brightness_set(struct
> > > > > > > > led_classdev >
> > > > > > > > *led_cdev,
> > > > > > > > +                                       enum
> > > > > > > > led_brightness
> > > > > > > > > 
> > > > > > > > brightness)
> > > > > > > > +{
> > > > > > > > +       struct led_classdev_flash *fled_cdev =
> > > > > > > > +               container_of(led_cdev, struct
> > > > > > > > led_classdev_flash, >
> > > > > > > > led_cdev);
> > > > > > > > +       struct qcom_flash_led *led =
> > > > > > > > +               container_of(fled_cdev, struct
> > > > > > > > qcom_flash_led,
> > > > > > > > > 
> > > > > > > > flash);
> > > > > > > > +       u32 current_ma = brightness * led-
> > > > > > > > > max_torch_current_ma
> > > > > > > > / >
> > > > > > > > LED_FULL;
> > > > > > > > +       bool enable = !!brightness;
> > > > > > > > +       int rc;
> > > > > > > > +
> > > > > > > > +       rc = set_flash_current(led, current_ma,
> > > > > > > > TORCH_MODE);
> > > > > > > > +       if (rc < 0)
> > > > > > > > +               return rc;
> > > > > > > > +
> > > > > > > > +       /* disable flash timeout fortorch LED */
> > > > > > > > +       rc = set_flash_timeout(led, 0);
> > > > > > > > +       if (rc < 0)
> > > > > > > > +               return rc;
> > > > > > > > +
> > > > > > > > +       rc = set_flash_module_en(led, enable);
> > > > > > > > +       if (rc < 0)
> > > > > > > > +               return rc;
> > > > > > > > +
> > > > > > > > +       return set_flash_strobe(led,SW_STROBE, enable);
> > > > > > > > +}
> > > > > > > > +
> > > > > > > > +static const struct led_flash_ops qcom_flash_ops = {
> > > > > > > > +       .flash_brightness_set =
> > > > > > > > qcom_flash_brightness_set,
> > > > > > > > +       .strobe_set = qcom_flash_strobe_set,
> > > > > > > > +       .strobe_get = qcom_flash_strobe_get,
> > > > > > > > +       .timeout_set = qcom_flash_timeout_set,
> > > > > > > > +       .fault_get = qcom_flash_fault_get,
> > > > > > > > +};
> > > > > > > > +
> > > > > > > > +#if IS_ENABLED(CONFIG_V4L2_FLASH_LED_CLASS)
> > > > > > > > +static int qcom_flash_external_strobe_set(struct
> > > > > > > > v4l2_flash >
> > > > > > > > *v4l2_flash, bool enable)
> > > > > > > > +{
> > > > > > > > +       struct led_classdev_flash *flash = v4l2_flash-
> > > > > > > > > fled_cdev;
> > > > > > > > +       struct qcom_flash_led *led =
> > > > > > > > container_of(flash,
> > > > > > > > struct
> > > > > > > > > 
> > > > > > > > qcom_flash_led, flash);
> > > > > > > > +       int rc;
> > > > > > > > +
> > > > > > > > +       rc = set_flash_module_en(led, enable);
> > > > > > > > +       if (rc < 0)
> > > > > > > > +               return rc;
> > > > > > > > +
> > > > > > > > +       if (enable)
> > > > > > > > +               return set_flash_strobe(led, HW_STROBE,
> > > > > > > > true);
> > > > > > > > +       else
> > > > > > > > +               return set_flash_strobe(led, SW_STROBE,
> > > > > > > > false);
> > > > > > > > +}
> > > > > > > > +
> > > > > > > > +static enum led_brightness
> > > > > > > > qcom_flash_intensity_to_led_brightness(
> > > > > > > > +               struct v4l2_flash *v4l2_flash, s32
> > > > > > > > intensity)
> > > > > > > > +{
> > > > > > > > +       struct led_classdev_flash *flash = v4l2_flash-
> > > > > > > > > fled_cdev;
> > > > > > > > +       struct qcom_flash_led *led =
> > > > > > > > container_of(flash,
> > > > > > > > struct
> > > > > > > > > 
> > > > > > > > qcom_flash_led, flash);
> > > > > > > > +       u32 current_ma = intensity/ 1000;
> > > > > > > > +
> > > > > > > > +       current_ma = min_t(u32, current_ma, > led-
> > > > > > > > > max_torch_current_ma);
> > > > > > > > +       if (!current_ma)
> > > > > > > > +               return LED_OFF;
> > > > > > > > +
> > > > > > > > +       return current_ma * LED_FULL/ led-
> > > > > > > > > max_torch_current_ma;
> > > > > > > > +}
> > > > > > > > +
> > > > > > > > +static s32
> > > > > > > > qcom_flash_brightness_to_led_intensity(struct
> > > > > > > > v4l2_flash > *v4l2_flash,
> > > > > > > > +                                       enum
> > > > > > > > led_brightness
> > > > > > > > > 
> > > > > > > > brightness)
> > > > > > > > +{
> > > > > > > > +       struct led_classdev_flash *flash = v4l2_flash-
> > > > > > > > > fled_cdev;
> > > > > > > > +       struct qcom_flash_led *led =
> > > > > > > > container_of(flash,
> > > > > > > > struct
> > > > > > > > > 
> > > > > > > > qcom_flash_led, flash);
> > > > > > > > +
> > > > > > > > +       return (brightness * led->max_torch_current_ma
> > > > > > > > *
> > > > > > > > 1000)
> > > > > > > > / >
> > > > > > > > LED_FULL;
> > > > > > > > +}
> > > > > > > > +
> > > > > > > > +static const struct v4l2_flash_ops qcom_v4l2_flash_ops
> > > > > > > > = {
> > > > > > > > +       .external_strobe_set =
> > > > > > > > qcom_flash_external_strobe_set,
> > > > > > > > +       .intensity_to_led_brightness= >
> > > > > > > > qcom_flash_intensity_to_led_brightness,
> > > > > > > > +       .led_brightness_to_intensity= >
> > > > > > > > qcom_flash_brightness_to_led_intensity,
> > > > > > > > +};
> > > > > > > > +
> > > > > > > > +static int qcom_flash_v4l2_init(struct qcom_flash_led
> > > > > > > > *led,
> > > > > > > > struct
> > > > > > > > > fwnode_handle *fwnode)
> > > > > > > > +{
> > > > > > > > +       struct v4l2_flash_config v4l2_cfg = {0};
> > > > > > > > +       struct led_flash_setting *s =
> > > > > > > > &v4l2_cfg.intensity;
> > > > > > > > +
> > > > > > > > +       if (!(led->flash.led_cdev.flags &
> > > > > > > > LED_DEV_CAP_FLASH))
> > > > > > > > +               return 0;
> > > > > > > > +
> > > > > > > > +       s->min = s->step = TORCH_IRES_UA * led-
> > > > > > > > >chan_count;
> > > > > > > > +       s->max = led->max_torch_current_ma * 1000;
> > > > > > > > +       s->val = min_t(u32, s->max,
> > > > > > > > TORCH_CURRENT_DEFAULT_UA);
> > > > > > > > +
> > > > > > > > +       strscpy(v4l2_cfg.dev_name, >led-
> > > > > > > > > flash.led_cdev.dev-
> > > > > > > > > kobj.name,
> > > > > > > > +                                       sizeof(v4l2_cfg
> > > > > > > > .dev
> > > > > > > > _nam
> > > > > > > > e));
> > > > > > > > +       v4l2_cfg.has_external_strobe= 1;
> > > > > > > > +       v4l2_cfg.flash_faults = LED_FAULT_INPUT_VOLTAGE
> > > > > > > > | >
> > > > > > > > LED_FAULT_OVER_CURRENT |
> > > > > > > > +               LED_FAULT_SHORT_CIRCUIT |
> > > > > > > > LED_FAULT_OVER_TEMPERATURE > | LED_FAULT_TIMEOUT;
> > > > > > > > +
> > > > > > > > +       led->v4l2_flash = v4l2_flash_init(led->chip-
> > > > > > > > >dev,
> > > > > > > > fwnode, >
> > > > > > > > &led->flash,
> > > > > > > > +                                       &qcom_v4l2_flas
> > > > > > > > h_op
> > > > > > > > s, >
> > > > > > > > &v4l2_cfg);
> > > > > > > > +       return PTR_ERR_OR_ZERO(led->v4l2_flash);
> > > > > > > > +}
> > > > > > > > +# else
> > > > > > > > +static int qcom_flash_v4l2_init(struct qcom_flash_led
> > > > > > > > *led,
> > > > > > > > struct
> > > > > > > > > fwnode_handle *fwnode)
> > > > > > > > +{
> > > > > > > > +       return 0;
> > > > > > > > +}
> > > > > > > > +#endif
> > > > > > > > +
> > > > > > > > +static int qcom_flash_register_led_device(struct
> > > > > > > > device
> > > > > > > > *parent,
> > > > > > > > +               struct fwnode_handle *node, struct
> > > > > > > > qcom_flash_led >
> > > > > > > > *led)
> > > > > > > > +{
> > > > > > > > +       struct qcom_flash_chip *chip= led->chip;
> > > > > > > > +       struct led_init_data init_data;
> > > > > > > > +       struct led_classdev_flash *flash;
> > > > > > > > +       struct led_flash_setting *s;
> > > > > > > > +       u32 count, val;
> > > > > > > > +       u32 channels[4];
> > > > > > > > +       int i, rc;
> > > > > > > > +
> > > > > > > > +       flash = &led->flash;
> > > > > > > > +       count = fwnode_property_count_u32(node, "led-
> > > > > > > > sources");
> > > > > > > > +       if (count <= 0) {
> > > > > > > > +               dev_err(chip->dev, "No led-sources
> > > > > > > > specified\n");
> > > > > > > > +               return -ENODEV;
> > > > > > > > +       }
> > > > > > > > +
> > > > > > > > +       if (count > chip->max_channels) {
> > > > > > > > +               dev_err(chip->dev, "led-sources count
> > > > > > > > %u
> > > > > > > > exceeds >
> > > > > > > > maximum channel count %u\n",
> > > > > > > > +                               count, chip-
> > > > > > > > >max_channels);
> > > > > > > > +               return -EINVAL;
> > > > > > > > +       }
> > > > > > > > +
> > > > > > > > +       rc = fwnode_property_read_u32_array(node, "led-
> > > > > > > > sources", >
> > > > > > > > channels, count);
> > > > > > > > +       if (rc < 0) {
> > > > > > > > +               dev_err(chip->dev, "get led-sources
> > > > > > > > failed,
> > > > > > > > rc=%d\n", > rc);
> > > > > > > > +               return rc;
> > > > > > > > +       }
> > > > > > > > +
> > > > > > > > +       led->chan_count = count;
> > > > > > > > +       led->chan_id = devm_kcalloc(chip->dev, count,
> > > > > > > > sizeof(u8), >
> > > > > > > > GFP_KERNEL);
> > > > > > > > +       if (!led->chan_id)
> > > > > > > > +               return -ENOMEM;
> > > > > > > > +
> > > > > > > > +       for (i = 0; i < count; i++) {
> > > > > > > > +               if (channels[i] > chip->max_channels) {
> > > > > > > > +                       dev_err(chip->dev, "led-source
> > > > > > > > out
> > > > > > > > of
> > > > > > > > HW >
> > > > > > > > support range [1-%u]\n",
> > > > > > > > +                                       chip-
> > > > > > > > > max_channels);
> > > > > > > > +                       return-EINVAL;
> > > > > > > > +               }
> > > > > > > > +
> > > > > > > > +               led->chan_id[i] = channels[i];
> > > > > > > > +       }
> > > > > > > > +
> > > > > > > > +       rc = fwnode_property_read_u32(node, "led-max-
> > > > > > > > microamp",
> > > > > > > > > 
> > > > > > > > &val);
> > > > > > > > +       if (rc < 0) {
> > > > > > > > +               dev_err(chip->dev, "Get led-max-
> > > > > > > > microamp
> > > > > > > > failed, >
> > > > > > > > rc=%d\n", rc);
> > > > > > > > +               return rc;
> > > > > > > > +       }
> > > > > > > > +
> > > > > > > > +       if (!val) {
> > > > > > > > +               dev_err(chip->dev, "led-max-microamp
> > > > > > > > shouldn't
> > > > > > > > be >
> > > > > > > > 0\n");
> > > > > > > > +               return -EINVAL;
> > > > > > > > +       }
> > > > > > > > +
> > > > > > > > +       val = min_t(u32, val, TORCH_CURRENT_MAX_UA * >
> > > > > > > > led-
> > > > > > > > > chan_count);
> > > > > > > > +       led->max_torch_current_ma = val / 1000;
> > > > > > > > +
> > > > > > > > +       if (fwnode_property_present(node, "flash-max-
> > > > > > > > microamp")) {
> > > > > > > > +               flash->led_cdev.flags |=
> > > > > > > > LED_DEV_CAP_FLASH;
> > > > > > > > +               rc = fwnode_property_read_u32(node, >
> > > > > > > > "flash-
> > > > > > > > max-
> > > > > > > > microamp", &val);
> > > > > > > > +               if (rc < 0) {
> > > > > > > > +                       dev_err(chip->dev, "Get flash-
> > > > > > > > max-
> > > > > > > > microamp
> > > > > > > > > failed, rc=%d\n", rc);
> > > > > > > > +                       returnrc;
> > > > > > > > +               }
> > > > > > > > +
> > > > > > > > +               val = min_t(u32, val,
> > > > > > > > FLASH_CURRENT_MAX_UA
> > > > > > > > * >
> > > > > > > > led-
> > > > > > > > > chan_count);
> > > > > > > > +               val = min_t(u32, val,
> > > > > > > > FLASH_TOTAL_CURRENT_MAX_UA);
> > > > > > > > +               s = &flash->brightness;
> > > > > > > > +               s->min = s->step = FLASH_IRES_UA * led-
> > > > > > > > > chan_count;
> > > > > > > > +               s->max = val;
> > > > > > > > +               s->val = min_t(u32, val,
> > > > > > > > FLASH_CURRENT_DEFAULT_UA);
> > > > > > > > +               led->max_flash_current_ma = val / 1000;
> > > > > > > > +               led->flash_current_ma = s->val / 1000;
> > > > > > > > +
> > > > > > > > +               rc = fwnode_property_read_u32(node, >
> > > > > > > > "flash-
> > > > > > > > max-
> > > > > > > > timeout-us", &val);
> > > > > > > > +               if (rc < 0) {
> > > > > > > > +                       dev_err(chip->dev, "Get flash-
> > > > > > > > max-
> > > > > > > > timeout-
> > > > > > > > us > failed, rc=%d\n", rc);
> > > > > > > > +                       returnrc;
> > > > > > > > +               }
> > > > > > > > +
> > > > > > > > +               val = min_t(u32, val,
> > > > > > > > FLASH_TIMEOUT_MAX_US);
> > > > > > > > +               s = &flash->timeout;
> > > > > > > > +               s->min = s->step =
> > > > > > > > FLASH_TIMEOUT_STEP_US;
> > > > > > > > +               s->val = s->max = val;
> > > > > > > > +               led->max_timeout_ms = led-
> > > > > > > > >flash_timeout_ms
> > > > > > > > =
> > > > > > > > val /
> > > > > > > > > 1000;
> > > > > > > > +
> > > > > > > > +               flash->ops = &qcom_flash_ops;
> > > > > > > > +       }
> > > > > > > > +
> > > > > > > > +       flash->led_cdev.brightness_set_blocking = >
> > > > > > > > qcom_flash_led_brightness_set;
> > > > > > > > +       init_data.fwnode = node;
> > > > > > > > +       init_data.devicename = NULL;
> > > > > > > > +       init_data.default_label = NULL;
> > > > > > > > +       init_data.devname_mandatory = false;
> > > > > > > > +       rc =
> > > > > > > > devm_led_classdev_flash_register_ext(parent,
> > > > > > > > flash, >
> > > > > > > > &init_data);
> > > > > > > > +       if (rc < 0) {
> > > > > > > > +               dev_err(chip->dev, "Register flash LED
> > > > > > > > classdev
> > > > > > > > > 
> > > > > > > > failed, rc=%d\n", rc);
> > > > > > > > +               return rc;
> > > > > > > > +       }
> > > > > > > > +
> > > > > > > > +       return qcom_flash_v4l2_init(led, node);
> > > > > > > > +}
> > > > > > > > +
> > > > > > > > +static int qcom_flash_led_probe(struct platform_device
> > > > > > > > *pdev)
> > > > > > > > +{
> > > > > > > > +       struct qcom_flash_chip *chip;
> > > > > > > > +       struct qcom_flash_led *led;
> > > > > > > > +       struct fwnode_handle *child;
> > > > > > > > +       struct device *dev = &pdev->dev;
> > > > > > > > +       struct regmap *map;
> > > > > > > > +       struct reg_field *regs;
> > > > > > > > +       int count, i, rc;
> > > > > > > > +       u32 val, reg_base;
> > > > > > > > +
> > > > > > > > +       chip = devm_kzalloc(dev, sizeof(*chip),
> > > > > > > > GFP_KERNEL);
> > > > > > > > +       if (!chip)
> > > > > > > > +               return -ENOMEM;
> > > > > > > > +
> > > > > > > > +       map = dev_get_regmap(dev->parent, NULL);
> > > > > > > > +       if (!map) {
> > > > > > > > +               dev_err(dev, "Failed to get parent
> > > > > > > > regmap\n");
> > > > > > > > +               return -EINVAL;
> > > > > > > > +       }
> > > > > > > > +
> > > > > > > > +       rc = fwnode_property_read_u32(dev->fwnode,
> > > > > > > > "reg",
> > > > > > > > &reg_base);
> > > > > > > > +       if (rc < 0) {
> > > > > > > > +               dev_err(dev, "Failed to get register
> > > > > > > > base
> > > > > > > > address,
> > > > > > > > > rc=%d\n", rc);
> > > > > > > > +               return rc;
> > > > > > > > +       }
> > > > > > > > +
> > > > > > > > +       rc = regmap_read(map, reg_base +
> > > > > > > > FLASH_TYPE_REG,
> > > > > > > > &val);
> > > > > > > > +       if (rc < 0) {
> > > > > > > > +               dev_err(dev, "Read flash module type
> > > > > > > > failed, >
> > > > > > > > rc=%d\n", rc);
> > > > > > > > +               return rc;
> > > > > > > > +       }
> > > > > > > > +
> > > > > > > > +       if (val != FLASH_TYPE_VAL){
> > > > > > > > +               dev_err(dev, "type %#x is not a flash
> > > > > > > > module\n", >
> > > > > > > > val);
> > > > > > > > +               return -ENODEV;
> > > > > > > > +       }
> > > > > > > > +
> > > > > > > > +       rc = regmap_read(map, reg_base +
> > > > > > > > FLASH_SUBTYPE_REG,
> > > > > > > > &val);
> > > > > > > > +       if (rc < 0) {
> > > > > > > > +               dev_err(dev, "Read flash module subtype
> > > > > > > > failed,
> > > > > > > > > 
> > > > > > > > rc=%d\n", rc);
> > > > > > > > +               return rc;
> > > > > > > > +       }
> > > > > > > > +
> > > > > > > > +       if (val == FLASH_SUBTYPE_3CH_VAL) {
> > > > > > > > +               chip->hw_type = QCOM_MVFLASH_3CH;
> > > > > > > > +               chip->max_channels = 3;
> > > > > > > > +               regs = mvflash_3ch_regs;
> > > > > > > > +       } else if (val == FLASH_SUBTYPE_4CH_VAL) {
> > > > > > > > +               chip->hw_type = QCOM_MVFLASH_4CH;
> > > > > > > > +               chip->max_channels = 4;
> > > > > > > > +               regs = mvflash_4ch_regs;
> > > > > > > > +       } else {
> > > > > > > > +               dev_err(dev, "flash subtype %#x is not
> > > > > > > > yet
> > > > > > > > > 
> > > > > > > > supported\n", val);
> > > > > > > > +               return -ENODEV;
> > > > > > > > +       }
> > > > > > > > +
> > > > > > > > +       for (i = 0; i < REG_MAX_COUNT; i++)
> > > > > > > > +               regs[i].reg += reg_base;
> > > > > > > > +
> > > > > > > > +       rc = devm_regmap_field_bulk_alloc(dev, map,
> > > > > > > > chip-
> > > > > > > > > r_fields,
> > > > > > > > > regs, REG_MAX_COUNT);
> > > > > > > > +       if (rc < 0) {
> > > > > > > > +               dev_err(dev, "failed to alloc regmap
> > > > > > > > filed,
> > > > > > > > rc=%d\n", > rc);
> > > > > > > > +               return rc;
> > > > > > > > +       }
> > > > > > > > +
> > > > > > > > +       chip->dev = dev;
> > > > > > > > +       platform_set_drvdata(pdev, chip);
> > > > > > > > +       mutex_init(&chip->lock);
> > > > > > > > +       count = device_get_child_node_count(dev);
> > > > > > > > +       if (count == 0 || count > chip->max_channels) {
> > > > > > > > +               dev_err(dev, "No child or child count
> > > > > > > > exceeds
> > > > > > > > %d\n", > chip->max_channels);
> > > > > > > > +               return -EINVAL;
> > > > > > > > +       }
> > > > > > > > +
> > > > > > > > +       chip->leds = devm_kcalloc(dev, count,
> > > > > > > > sizeof(*chip-
> > > > > > > > > leds),
> > > > > > > > > GFP_KERNEL);
> > > > > > > > +       if (!chip->leds)
> > > > > > > > +               return -ENOMEM;
> > > > > > > > +
> > > > > > > > +       device_for_each_child_node(dev, child) {
> > > > > > > > +               led = &chip->leds[chip->leds_count];
> > > > > > > > +               led->chip = chip;
> > > > > > > > +               rc =
> > > > > > > > qcom_flash_register_led_device(dev,
> > > > > > > > child,
> > > > > > > > led);
> > > > > > > > +               if (rc < 0)
> > > > > > > > +                       goto release;
> > > > > > > > +
> > > > > > > > +               chip->leds_count++;
> > > > > > > > +       }
> > > > > > > > +
> > > > > > > > +       return 0;
> > > > > > > > +release:
> > > > > > > > +       while (chip->leds && chip->leds_count--)
> > > > > > > > +               v4l2_flash_release(chip->leds[chip-
> > > > > > > > > leds_count].v4l2_> flash);
> > > > > > > > +       return rc;
> > > > > > > > +}
> > > > > > > > +
> > > > > > > > +static int qcom_flash_led_remove(struct
> > > > > > > > platform_device
> > > > > > > > *pdev)
> > > > > > > > +{
> > > > > > > > +       struct qcom_flash_chip *chip=
> > > > > > > > platform_get_drvdata(pdev);
> > > > > > > > +
> > > > > > > > +       while (chip->leds_count--)
> > > > > > > > +               v4l2_flash_release(chip->leds[chip-
> > > > > > > > > leds_count].v4l2_> flash);
> > > > > > > > +
> > > > > > > > +       mutex_destroy(&chip->lock);
> > > > > > > > +       return 0;
> > > > > > > > +}
> > > > > > > > +
> > > > > > > > +static const struct of_device_id
> > > > > > > > qcom_flash_led_match_table[]
> > > > > > > > = {
> > > > > > > > +       { .compatible = "qcom,spmi-flash-led" },
> > > > > > > > +       { }
> > > > > > > > +};
> > > > > > > > +
> > > > > > > > +static struct platform_driver qcom_flash_led_driver =
> > > > > > > > {
> > > > > > > > +       .driver = {
> > > > > > > > +               .name = "leds-qcom-flash",
> > > > > > > > +               .of_match_table =
> > > > > > > > qcom_flash_led_match_table,
> > > > > > > > +       },
> > > > > > > > +       .probe = qcom_flash_led_probe,
> > > > > > > > +       .remove = qcom_flash_led_remove,
> > > > > > > > +};
> > > > > > > > +
> > > > > > > > +module_platform_driver(qcom_flash_led_driver);
> > > > > > > > +
> > > > > > > > +MODULE_DESCRIPTION("QCOM Flash LED driver");
> > > > > > > > +MODULE_LICENSE("GPL");
> > > > > > 
> > > > > > Kind regards,
> > > > > > Dylan Van Assche
> > > > 
> > > > Kind regards,
> > > > Dylan Van Assche
> > > > 
> > 
> > Kind regards,
> > Dylan Van Assche
> >
  
Fenglin Wu Nov. 3, 2022, 3:19 a.m. UTC | #11
>>>>>>>>> led_classdev_flash
>>>>>>>>>>
>>>>>>>>> *fled_cdev, u32 brightness)
>>>>>>>>> +{
>>>>>>>>> +       struct qcom_flash_led *led =
>>>>>>>>> container_of(fled_cdev,
>>>>>>>>> struct
>>>>>>>>>> qcom_flash_led, flash);
>>>>>>>>> +
>>>>>>>>> +       led->flash_current_ma = min_t(u32, led-
>>>>>>>>>> max_flash_current_ma, > brightness / 1000);
>>>>>>>>> +       return 0;
>>>>>>>>> +}
>>>>>>>
>>>>>>> This doesn't seem to work in torch mode for me on PMI8998.
>>>>>>> If
>>>>>>> the
>>>>>>> brightness is 0, the torch is OFF as expected, but when the
>>>>>>> torch
>>>>>>> is
>>>>>>> ON, you cannot control the brightness. The brightness is
>>>>>>> the
>>>>>>> same
>>>>>>> for
>>>>>>> [1, 255]. If the hardware cannot change the brightness in
>>>>>>> torch
>>>>>>> mode,
>>>>>>> it would be nice to report a max_brightness value of 1
>>>>>>> instead
>>>>>>> of
>>>>>>> 255
>>>>>>> for userspace. This could be a limitation of the PMI8998,
>>>>>>> not
>>>>>>> sure.
>>>>>>> Do you have any insights here? This driver is already 99%
>>>>>>> working
>>>>>>> for
>>>>>>> SDM845+PMI8998.
>>>>>>>
>>>>>>> Flash mode works great, timeout & brightness can be
>>>>>>> configured
>>>>>>> just
>>>>>>> fine.
>>>>>>>
>>>>>>
>>>>>> Here, function qcom_flash_brightness_set() is used for
>>>>>> setting
>>>>>> brightness in flash mode and it was supposed to be working
>>>>>> with
>>>>>> following commands combination:
>>>>>>            echo xxx > flash_brightness
>>>>>>            echo 1 > flash_strobe  (you will need to toggle
>>>>>> flash_strobe
>>>>>> when you
>>>>>> enabling it again)
>>>>>>
>>>>>> Can you check if you can see the brightness change in flash
>>>>>> mode
>>>>>> when
>>>>>> you updating the flash_brightness value with these commands?
>>>>>>
>>>>>> You can echo any value between [0, max_flash_brightness] into
>>>>>> the
>>>>>> flash_brightness, there is a "max_flash_brightness" sysfs
>>>>>> node
>>>>>> and
>>>>>> the
>>>>>> value comes from DT property "flash-max-microamp", ex. my
>>>>>> dtsi
>>>>>> node
>>>>>> has
>>>>>> "flash-max-microamp = <2000000>;" defined so I am having
>>>>>> following
>>>>>> value
>>>>>> for max_flash_brightness:
>>>>>>
>>>>>> kalama:/sys/class/leds/white:flash-0 # cat
>>>>>> max_flash_brightness
>>>>>> 2000000
>>>>>>
>>>>>> And by default flash mode uses 12500uA resolution so you
>>>>>> won't
>>>>>> see
>>>>>> brightness change when you update it with values between [1,
>>>>>> 12500].
>>>>>
>>>>> Yes, this works perfectly fine on PMI8998. I can adjust the
>>>>> flash
>>>>> brightness and flash timeout perfectly.
>>>>>
>>>>>>
>>>>>> If you want to update the brightness for torch node, you can
>>>>>> directly
>>>>>> update the "brightness" node with values between [0, 255],
>>>>>> and
>>>>>> it's
>>>>>> mapping to the torch current between [0, led-max-microamp].
>>>>>> "led-max-microamp" is also has value coming from the DT
>>>>>> property.
>>>>>>
>>>>>> This worked at my side on both pm8150C and pm8550.I think it
>>>>>> should
>>>>>> work
>>>>>> on PMI8998 as well because the flash module in it is very
>>>>>> similar
>>>>>> to
>>>>>> the
>>>>>> one in PM8150c. Let me know if you still see such issues at
>>>>>> your
>>>>>> side.
>>>>>> Thanks
>>>>>
>>>>> Only here I have an issue with PMI8998: the "brightness" nodes
>>>>> should
>>>>> change the brightness of the torch, but it doesn't make a
>>>>> difference
>>>>> here. When I do:
>>>>>
>>>>> - echo 0 > brightness --> LED turns OFF
>>>>> - echo 255 > brightness --> LED turns ON
>>>>> - echo 100 > brightness --> LED is still ON, but brightness is
>>>>> the
>>>>> same
>>>>> as with 255.
>>>>>
>>>>> Could it be that PMI8998 is slightly different here than with
>>>>> PM8150c
>>>>> for example? Maybe it doesn't support brightness for torch?
>>>>>
>>>>> Here's my DTS:
>>>>>
>>>>> *PMI8998*
>>>>>
>>>>> pmi8998_flash: led-controller@d300 {
>>>>>           compatible = "qcom,pm6150l-flash-led", "qcom,spmi-
>>>>> flash-
>>>>> led";
>>>>>           reg = <0xd300>;
>>>>>           status = "disabled";
>>>>> };
>>>>>
>>>>> *SDM845 SHIFT axolotl*
>>>>>
>>>>> &pmi8998_flash {
>>>>>           status = "okay";
>>>>>
>>>>>           led-0 {
>>>>>                   function = LED_FUNCTION_FLASH;
>>>>>                   color = <LED_COLOR_ID_WHITE>;
>>>>>                   led-sources = <1>;
>>>>>                   led-max-microamp = <180000>;
>>>>>                   flash-max-microamp = <1000000>;
>>>>>                   flash-max-timeout-us = <1280000>;
>>>>>           };
>>>>>
>>>>>           led-1 {
>>>>>                   function = LED_FUNCTION_FLASH;
>>>>>                   color = <LED_COLOR_ID_YELLOW>;
>>>>>                   led-sources = <2>;
>>>>>                   led-max-microamp = <180000>;
>>>>>                   flash-max-microamp = <1000000>;
>>>>>                   flash-max-timeout-us = <1280000>;
>>>>>           };
>>>>> };
>>>>>
>>>> Thank you for getting back all the details. The devicetree node
>>>> looks
>>>> good to me.
>>>>
>>>> I checked again and confirmed that the flash modules in PMI8998
>>>> and
>>>> PM8150C have the same register definition for ITARGETx (0xD343 +
>>>> x)
>>>> and
>>>> IRESOLUTION (0xD347), these are the only 2 settings would impact
>>>> LED
>>>> brightness, and in torch mode, IRESOLUTION is fixed to 5mA and
>>>> only
>>>> ITARGET is updated accordingly.
>>>>
>>>> I updated my workspace to use the same current for torch mode as
>>>> your
>>>> settings in devicetree and tried again on my PM8150C device,I
>>>> could
>>>> notice the brightness change when echoing different values to the
>>>> brightness sysfs node, however, when I updating values between
>>>> 255
>>>> and
>>>> 200, it wasn't a very noticeable brightness change with naked
>>>> eys,
>>>> but I
>>>> could see the ITRAGETx register changed accordingly when reading
>>>> its
>>>> value back from the regmap debugfs node.
>>>>
>>>> Can you try the same and see if the register got updated
>>>> accordingly
>>>> when you updating brightness values? If yes, I would wonder if
>>>> the
>>>> LED
>>>> component on your device has upper current limit in torch mode
>>>> close
>>>> to
>>>> (100 / 255 ) * 180mA so you that you can't observe the brightness
>>>> change
>>>> when updating between 100 to 255. Another easier thing to try,
>>>> can
>>>> you
>>>> echo a lower brightness value, such as 10, to see if you can
>>>> notice
>>>> the
>>>> brightness change?
>>>>
>>>
>>> Aha! It does seem to work partially!
>>>
>>> I tried it with brightness 0 --> 255 --> 1. This order keeps the
>>> highest brightness at all times, matching 255. The other way
>>> around: 0
>>> --> 1 --> 255 keeps the lowest brightness, matching 1.
>>> Changing the brightness only works if the LED was turned OFF first:
>>>
>>> 0 --> 255 --> 0 --> 1
>>> 0 --> 1 --> 0 --> 255
>>>
>>> both work fine, verified it with the following shell commands
>>> (assumed
>>> that the LED was turned OFF to start):
>>>
>>> echo 1 > brightness && sleep 3 && echo 0 > brightness && echo 255 >
>>> brightness
>>> echo 255 > brightness && sleep 3 &&  echo 0 > brightness && echo 1
>>>>
>>> brightness
>>>
>>> Maybe a register needs to be reset when the brightness changes?
>>>
>>
>> Hi Dylan,
>>
>> Would you mind to help me testing this small change on PMI8998? It
>> simply toggles the CHANNEL_EN bit when updating LED brightness. If it
>> works, I will add it specifically for PMI8998 in patch v5.
>>
>> @@ -241,8 +243,21 @@ static int set_flash_strobe(struct
>> qcom_flash_led
>> *led, enum led_strobe s
>> trobe,
>>                   chan_mask |= BIT(chan_id - 1);
>>           }
>>
>> -       /* enable/disable flash channels */
>>           mask = chan_mask;
>> +       /*
>> +        * For flash module inside PMI8998, if strobe(true) is called
>> when
>> +        * the LED is already enabled, disable the channel 1st and
>> then
>> +        * enable it again.  This could happen when updating LED
>> brightness
>> +        * after LED is turned on.
>> +        */
>> +       if (led->enabled && (led->enabled == state)) {
>> +               rc =
>> regmap_field_update_bits(chip->r_fields[REG_CHAN_EN], mask, 0);
>> +               if (rc < 0)
>> +                       return rc;
>> +       }
>> +
>> +       /* enable/disable flash channels */
>>           val = state ? mask : 0;
>>           rc = regmap_field_update_bits(chip->r_fields[REG_CHAN_EN],
>> mask, val);
>>           if (rc < 0)
>>
>> Thanks
>> Fenglin Wu
> 
> With this change I can indeed change the brightness.
> However, it works now 50% of the time:
> 
> - echo 255 > brightness --> LED turns ON, max brightness: 255
> - echo 1 > brightness --> LED turns OFF
> - echo 1 > brightness --> LED turns ON, min brightness: 1
> 
> This behavior didn't occur before I applied this change.
> I had a look at the change but I cannot really pinpoint why this is
> happening...
> 
> Kind regards,
> Dylan Van Assche
> 
Thanks Dylan. It seems much more complex than what I thought to support 
the flash module in PMI8998 with the same driver. Then I will not 
include PMI8998 support in patch v5 and I will consider to push a 
following patch after this driver got accepted, I will try if I can find 
a PMI8998 device and fully test the driver before I push that.
Thanks

Fenglin Wu
  

Patch

diff --git a/drivers/leds/flash/Kconfig b/drivers/leds/flash/Kconfig
index d3eb689b193c..f36a60409290 100644
--- a/drivers/leds/flash/Kconfig
+++ b/drivers/leds/flash/Kconfig
@@ -61,6 +61,21 @@  config LEDS_MT6360
 	  Independent current sources supply for each flash LED support torch
 	  and strobe mode.
 
+config LEDS_QCOM_FLASH
+	tristate "LED support for flash module inside Qualcomm Technologies, Inc. PMIC"
+	depends on MFD_SPMI_PMIC || COMPILE_TEST
+	depends on LEDS_CLASS && OF
+	depends on V4L2_FLASH_LED_CLASS || !V4L2_FLASH_LED_CLASS
+	select REGMAP
+	help
+	  This option enables support for the flash module found in Qualcomm
+	  Technologies, Inc. PMICs. The flash module can have 3 or 4 flash LED
+	  channels and each channel is programmable to support up to 1.5 A full
+	  scale current. It also supports connecting two channels' output together
+	  to supply one LED component to achieve current up to 2 A. In such case,
+	  the total LED current will be split symmetrically on each channel and
+	  they will be enabled/disabled at the same time.
+
 config LEDS_RT4505
 	tristate "LED support for RT4505 flashlight controller"
 	depends on I2C && OF
diff --git a/drivers/leds/flash/Makefile b/drivers/leds/flash/Makefile
index 0acbddc0b91b..8a60993f1a25 100644
--- a/drivers/leds/flash/Makefile
+++ b/drivers/leds/flash/Makefile
@@ -6,6 +6,7 @@  obj-$(CONFIG_LEDS_AS3645A)	+= leds-as3645a.o
 obj-$(CONFIG_LEDS_KTD2692)	+= leds-ktd2692.o
 obj-$(CONFIG_LEDS_LM3601X)	+= leds-lm3601x.o
 obj-$(CONFIG_LEDS_MAX77693)	+= leds-max77693.o
+obj-$(CONFIG_LEDS_QCOM_FLASH)	+= leds-qcom-flash.o
 obj-$(CONFIG_LEDS_RT4505)	+= leds-rt4505.o
 obj-$(CONFIG_LEDS_RT8515)	+= leds-rt8515.o
 obj-$(CONFIG_LEDS_SGM3140)	+= leds-sgm3140.o
diff --git a/drivers/leds/flash/leds-qcom-flash.c b/drivers/leds/flash/leds-qcom-flash.c
new file mode 100644
index 000000000000..a9fcf61600c3
--- /dev/null
+++ b/drivers/leds/flash/leds-qcom-flash.c
@@ -0,0 +1,700 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bits.h>
+#include <linux/leds.h>
+#include <linux/led-class-flash.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+#include <media/v4l2-flash-led-class.h>
+
+/* registers definitions */
+#define FLASH_TYPE_REG			0x04
+#define FLASH_TYPE_VAL			0x18
+
+#define FLASH_SUBTYPE_REG		0x05
+#define FLASH_SUBTYPE_3CH_VAL		0x04
+#define FLASH_SUBTYPE_4CH_VAL		0x07
+
+#define FLASH_TIMER_EN_BIT		BIT(7)
+#define FLASH_TIMER_VAL_MASK		GENMASK(6, 0)
+#define FLASH_TIMER_STEP_MS		10
+
+#define FLASH_STROBE_HW_SW_SEL_BIT	BIT(2)
+#define SW_STROBE_VAL			0
+#define HW_STROBE_VAL			1
+#define FLASH_HW_STROBE_TRIGGER_SEL_BIT	BIT(1)
+#define STROBE_LEVEL_TRIGGER_VAL	0
+#define STROBE_EDGE_TRIGGER_VAL		1
+#define FLASH_STROBE_POLARITY_BIT	BIT(0)
+#define STROBE_ACTIVE_HIGH_VAL		1
+
+#define FLASH_IRES_MASK_4CH		BIT(0)
+#define FLASH_IRES_MASK_3CH		GENMASK(1, 0)
+#define FLASH_IRES_12P5MA_VAL		0
+#define FLASH_IRES_5MA_VAL_4CH		1
+#define FLASH_IRES_5MA_VAL_3CH		3
+
+/* constants */
+#define FLASH_CURRENT_MAX_UA		1500000
+#define TORCH_CURRENT_MAX_UA		500000
+#define FLASH_TOTAL_CURRENT_MAX_UA	2000000
+#define FLASH_CURRENT_DEFAULT_UA	1000000
+#define TORCH_CURRENT_DEFAULT_UA	200000
+
+#define TORCH_IRES_UA			5000
+#define FLASH_IRES_UA			12500
+
+#define FLASH_TIMEOUT_MAX_US		1280000
+#define FLASH_TIMEOUT_STEP_US		10000
+
+enum hw_type {
+	QCOM_MVFLASH_3CH,
+	QCOM_MVFLASH_4CH,
+};
+
+enum led_mode {
+	FLASH_MODE,
+	TORCH_MODE,
+};
+
+enum led_strobe {
+	SW_STROBE,
+	HW_STROBE,
+};
+
+enum {
+	REG_STATUS1,
+	REG_STATUS2,
+	REG_STATUS3,
+	REG_CHAN_TIMER,
+	REG_ITARGET,
+	REG_MODULE_EN,
+	REG_IRESOLUTION,
+	REG_CHAN_STROBE,
+	REG_CHAN_EN,
+	REG_MAX_COUNT,
+};
+
+struct reg_field mvflash_3ch_regs[REG_MAX_COUNT] = {
+	REG_FIELD(0x08, 0, 7),			/* status1	*/
+	REG_FIELD(0x09, 0, 7),                  /* status2	*/
+	REG_FIELD(0x0a, 0, 7),                  /* status3	*/
+	REG_FIELD_ID(0x40, 0, 7, 3, 1),         /* chan_timer	*/
+	REG_FIELD_ID(0x43, 0, 6, 3, 1),         /* itarget	*/
+	REG_FIELD(0x46, 7, 7),                  /* module_en	*/
+	REG_FIELD(0x47, 0, 5),                  /* iresolution	*/
+	REG_FIELD_ID(0x49, 0, 2, 3, 1),         /* chan_strobe	*/
+	REG_FIELD(0x4c, 0, 2),                  /* chan_en	*/
+};
+
+struct reg_field mvflash_4ch_regs[REG_MAX_COUNT] = {
+	REG_FIELD(0x06, 0, 7),			/* status1	*/
+	REG_FIELD(0x07, 0, 6),			/* status2	*/
+	REG_FIELD(0x09, 0, 7),			/* status3	*/
+	REG_FIELD_ID(0x3e, 0, 7, 4, 1),		/* chan_timer	*/
+	REG_FIELD_ID(0x42, 0, 6, 4, 1),		/* itarget	*/
+	REG_FIELD(0x46, 7, 7),			/* module_en	*/
+	REG_FIELD(0x49, 0, 3),			/* iresolution	*/
+	REG_FIELD_ID(0x4a, 0, 6, 4, 1),		/* chan_strobe	*/
+	REG_FIELD(0x4e, 0, 3),			/* chan_en	*/
+};
+
+struct qcom_flash_led {
+	struct qcom_flash_chip		*chip;
+	struct led_classdev_flash	flash;
+	struct v4l2_flash		*v4l2_flash;
+	u32				max_flash_current_ma;
+	u32				max_torch_current_ma;
+	u32				max_timeout_ms;
+	u32				flash_current_ma;
+	u32				flash_timeout_ms;
+	u8				*chan_id;
+	u8				chan_count;
+	bool				enabled;
+};
+
+struct qcom_flash_chip {
+	struct qcom_flash_led	*leds;
+	struct regmap_field     *r_fields[REG_MAX_COUNT];
+	struct device		*dev;
+	struct mutex		lock;
+	enum hw_type		hw_type;
+	u8			leds_count;
+	u8			max_channels;
+	u8			chan_en_bits;
+};
+
+static int set_flash_module_en(struct qcom_flash_led *led, bool en)
+{
+	struct qcom_flash_chip *chip = led->chip;
+	u8 led_mask = 0, val;
+	int i, rc;
+
+	for (i = 0; i < led->chan_count; i++)
+		led_mask |= BIT(led->chan_id[i] - 1);
+
+	mutex_lock(&chip->lock);
+	if (en)
+		chip->chan_en_bits |= led_mask;
+	else
+		chip->chan_en_bits &= ~led_mask;
+
+	val = !!chip->chan_en_bits;
+	rc = regmap_field_write(chip->r_fields[REG_MODULE_EN], val);
+	if (rc < 0)
+		dev_err(chip->dev, "write module_en failed, rc=%d\n", rc);
+	mutex_unlock(&chip->lock);
+
+	return rc;
+}
+
+static int set_flash_current(struct qcom_flash_led *led, u32 current_ma, enum led_mode mode)
+{
+	struct qcom_flash_chip *chip = led->chip;
+	u32 itarg_ua = current_ma * 1000 / led->chan_count + 1;
+	u32 ires_ua = (mode == FLASH_MODE) ? FLASH_IRES_UA : TORCH_IRES_UA;
+	u8 val, shift, ires_mask = 0, ires_val = 0, chan_id;
+	int i, rc;
+
+	/*
+	 * Split the current across the channels and set the
+	 * IRESOLUTION and ITARGET registers accordingly.
+	 */
+	for (i = 0; i < led->chan_count; i++) {
+		chan_id = led->chan_id[i];
+		if (itarg_ua < ires_ua)
+			val = 0;
+		else
+			val = itarg_ua / ires_ua - 1;
+
+		rc = regmap_fields_write(chip->r_fields[REG_ITARGET], chan_id - 1, val);
+		if (rc < 0)
+			return rc;
+
+		if (chip->hw_type == QCOM_MVFLASH_3CH) {
+			shift = (chan_id - 1) * 2;
+			ires_mask |= FLASH_IRES_MASK_3CH << shift;
+			ires_val |= ((mode == FLASH_MODE) ?
+				(FLASH_IRES_12P5MA_VAL << shift) :
+				(FLASH_IRES_5MA_VAL_3CH << shift));
+		} else if (chip->hw_type == QCOM_MVFLASH_4CH) {
+			shift = chan_id - 1;
+			ires_mask |= FLASH_IRES_MASK_4CH << shift;
+			ires_val |= ((mode == FLASH_MODE) ?
+				(FLASH_IRES_12P5MA_VAL << shift) :
+				(FLASH_IRES_5MA_VAL_4CH << shift));
+		}
+	}
+
+	return regmap_field_update_bits(chip->r_fields[REG_IRESOLUTION], ires_mask, ires_val);
+}
+
+static int set_flash_timeout(struct qcom_flash_led *led, u32 timeout_ms)
+{
+	struct qcom_flash_chip *chip = led->chip;
+	u8 val, chan_id;
+	int rc, i;
+
+	/* set SAFETY_TIMER for all the channels connected to the same LED */
+	timeout_ms = min_t(u32, timeout_ms, led->max_timeout_ms);
+	for (i = 0; i < led->chan_count; i++) {
+		chan_id = led->chan_id[i];
+		val = timeout_ms / FLASH_TIMER_STEP_MS;
+		val = clamp_t(u8, val, 0, FLASH_TIMER_VAL_MASK);
+		if (timeout_ms)
+			val |= FLASH_TIMER_EN_BIT;
+
+		rc = regmap_fields_write(chip->r_fields[REG_CHAN_TIMER], chan_id - 1, val);
+		if (rc < 0)
+			return rc;
+	}
+
+	return 0;
+}
+
+static int set_flash_strobe(struct qcom_flash_led *led, enum led_strobe strobe, bool state)
+{
+	struct qcom_flash_chip *chip = led->chip;
+	u8 mask, val, chan_id = 0, chan_mask = 0;
+	int rc, i;
+
+	/* Set SW strobe config for all channels connected to the LED */
+	for (i = 0; i < led->chan_count; i++) {
+		chan_id = led->chan_id[i];
+		if (strobe == SW_STROBE)
+			val = FIELD_PREP(FLASH_STROBE_HW_SW_SEL_BIT, SW_STROBE_VAL);
+		else
+			val = FIELD_PREP(FLASH_STROBE_HW_SW_SEL_BIT, HW_STROBE_VAL);
+
+		val |= FIELD_PREP(FLASH_HW_STROBE_TRIGGER_SEL_BIT, STROBE_LEVEL_TRIGGER_VAL) |
+			FIELD_PREP(FLASH_STROBE_POLARITY_BIT, STROBE_ACTIVE_HIGH_VAL);
+		rc = regmap_fields_write(chip->r_fields[REG_CHAN_STROBE], chan_id - 1, val);
+		if (rc < 0)
+			return rc;
+
+		chan_mask |= BIT(chan_id - 1);
+	}
+
+	/* enable/disable flash channels */
+	mask = chan_mask;
+	val = state ? mask : 0;
+	rc = regmap_field_update_bits(chip->r_fields[REG_CHAN_EN], mask, val);
+	if (rc < 0)
+		return rc;
+
+	led->enabled = state;
+	return 0;
+}
+
+static int qcom_flash_brightness_set(struct led_classdev_flash *fled_cdev, u32 brightness)
+{
+	struct qcom_flash_led *led = container_of(fled_cdev, struct qcom_flash_led, flash);
+
+	led->flash_current_ma = min_t(u32, led->max_flash_current_ma, brightness / 1000);
+	return 0;
+}
+
+static int qcom_flash_timeout_set(struct led_classdev_flash *fled_cdev, u32 timeout)
+{
+	struct qcom_flash_led *led = container_of(fled_cdev, struct qcom_flash_led, flash);
+
+	led->flash_timeout_ms = timeout / 1000;
+	return 0;
+}
+
+static int qcom_flash_strobe_set(struct led_classdev_flash *fled_cdev, bool state)
+{
+	struct qcom_flash_led *led = container_of(fled_cdev, struct qcom_flash_led, flash);
+	int rc;
+
+	rc = set_flash_current(led, led->flash_current_ma, FLASH_MODE);
+	if (rc < 0)
+		return rc;
+
+	rc = set_flash_timeout(led, led->flash_timeout_ms);
+	if (rc < 0)
+		return rc;
+
+	rc = set_flash_module_en(led, state);
+	if (rc < 0)
+		return rc;
+
+	return set_flash_strobe(led, SW_STROBE, state);
+}
+
+static int qcom_flash_strobe_get(struct led_classdev_flash *fled_cdev, bool *state)
+{
+	struct qcom_flash_led *led = container_of(fled_cdev, struct qcom_flash_led, flash);
+
+	*state = led->enabled;
+	return 0;
+}
+
+static int qcom_flash_fault_get(struct led_classdev_flash *fled_cdev, u32 *fault)
+{
+	struct qcom_flash_led *led = container_of(fled_cdev, struct qcom_flash_led, flash);
+	struct qcom_flash_chip *chip = led->chip;
+	u8 shift, chan_id = 0, chan_mask = 0;
+	u8 ot_mask = 0, oc_mask = 0, uv_mask = 0;
+	u32 val, fault_sts = 0;
+	int i, rc;
+
+	rc = regmap_field_read(chip->r_fields[REG_STATUS1], &val);
+	if (rc < 0)
+		return rc;
+
+	for (i = 0; i < led->chan_count; i++) {
+		chan_id = led->chan_id[i];
+		shift = (chan_id - 1) * 2;
+		if (val & BIT(shift))
+			fault_sts |= LED_FAULT_SHORT_CIRCUIT;
+		chan_mask |= BIT(chan_id - 1);
+	}
+
+	rc = regmap_field_read(chip->r_fields[REG_STATUS2], &val);
+	if (rc < 0)
+		return rc;
+
+	if (chip->hw_type == QCOM_MVFLASH_3CH) {
+		ot_mask = 0x0f;
+		oc_mask = 0xe0;
+		uv_mask = 0x10;
+	} else if (chip->hw_type == QCOM_MVFLASH_4CH) {
+		ot_mask = 0x70;
+		oc_mask = 0x0e;
+		uv_mask = 0x01;
+	}
+
+	if (val & ot_mask)
+		fault_sts |= LED_FAULT_OVER_TEMPERATURE;
+	if (val & oc_mask)
+		fault_sts |= LED_FAULT_OVER_CURRENT;
+	if (val & uv_mask)
+		fault_sts |= LED_FAULT_INPUT_VOLTAGE;
+
+	rc = regmap_field_read(chip->r_fields[REG_STATUS3], &val);
+	if (rc < 0)
+		return rc;
+
+	if (chip->hw_type == QCOM_MVFLASH_3CH) {
+		if (val & chan_mask)
+			fault_sts |= LED_FAULT_TIMEOUT;
+	} else if (chip->hw_type == QCOM_MVFLASH_4CH) {
+		for (i = 0; i < led->chan_count; i++) {
+			chan_id = led->chan_id[i];
+			shift = (chan_id - 1) * 2;
+			if (val & BIT(shift))
+				fault_sts |= LED_FAULT_TIMEOUT;
+		}
+	}
+
+	*fault = fault_sts;
+	return 0;
+}
+
+static int qcom_flash_led_brightness_set(struct led_classdev *led_cdev,
+					enum led_brightness brightness)
+{
+	struct led_classdev_flash *fled_cdev =
+		container_of(led_cdev, struct led_classdev_flash, led_cdev);
+	struct qcom_flash_led *led =
+		container_of(fled_cdev, struct qcom_flash_led, flash);
+	u32 current_ma = brightness * led->max_torch_current_ma / LED_FULL;
+	bool enable = !!brightness;
+	int rc;
+
+	rc = set_flash_current(led, current_ma, TORCH_MODE);
+	if (rc < 0)
+		return rc;
+
+	/* disable flash timeout for torch LED */
+	rc = set_flash_timeout(led, 0);
+	if (rc < 0)
+		return rc;
+
+	rc = set_flash_module_en(led, enable);
+	if (rc < 0)
+		return rc;
+
+	return set_flash_strobe(led, SW_STROBE, enable);
+}
+
+static const struct led_flash_ops qcom_flash_ops = {
+	.flash_brightness_set = qcom_flash_brightness_set,
+	.strobe_set = qcom_flash_strobe_set,
+	.strobe_get = qcom_flash_strobe_get,
+	.timeout_set = qcom_flash_timeout_set,
+	.fault_get = qcom_flash_fault_get,
+};
+
+#if IS_ENABLED(CONFIG_V4L2_FLASH_LED_CLASS)
+static int qcom_flash_external_strobe_set(struct v4l2_flash *v4l2_flash, bool enable)
+{
+	struct led_classdev_flash *flash = v4l2_flash->fled_cdev;
+	struct qcom_flash_led *led = container_of(flash, struct qcom_flash_led, flash);
+	int rc;
+
+	rc = set_flash_module_en(led, enable);
+	if (rc < 0)
+		return rc;
+
+	if (enable)
+		return set_flash_strobe(led, HW_STROBE, true);
+	else
+		return set_flash_strobe(led, SW_STROBE, false);
+}
+
+static enum led_brightness qcom_flash_intensity_to_led_brightness(
+		struct v4l2_flash *v4l2_flash, s32 intensity)
+{
+	struct led_classdev_flash *flash = v4l2_flash->fled_cdev;
+	struct qcom_flash_led *led = container_of(flash, struct qcom_flash_led, flash);
+	u32 current_ma = intensity / 1000;
+
+	current_ma = min_t(u32, current_ma, led->max_torch_current_ma);
+	if (!current_ma)
+		return LED_OFF;
+
+	return current_ma * LED_FULL / led->max_torch_current_ma;
+}
+
+static s32 qcom_flash_brightness_to_led_intensity(struct v4l2_flash *v4l2_flash,
+					enum led_brightness brightness)
+{
+	struct led_classdev_flash *flash = v4l2_flash->fled_cdev;
+	struct qcom_flash_led *led = container_of(flash, struct qcom_flash_led, flash);
+
+	return (brightness * led->max_torch_current_ma * 1000) / LED_FULL;
+}
+
+static const struct v4l2_flash_ops qcom_v4l2_flash_ops = {
+	.external_strobe_set = qcom_flash_external_strobe_set,
+	.intensity_to_led_brightness = qcom_flash_intensity_to_led_brightness,
+	.led_brightness_to_intensity = qcom_flash_brightness_to_led_intensity,
+};
+
+static int qcom_flash_v4l2_init(struct qcom_flash_led *led, struct fwnode_handle *fwnode)
+{
+	struct v4l2_flash_config v4l2_cfg = {0};
+	struct led_flash_setting *s = &v4l2_cfg.intensity;
+
+	if (!(led->flash.led_cdev.flags & LED_DEV_CAP_FLASH))
+		return 0;
+
+	s->min = s->step = TORCH_IRES_UA * led->chan_count;
+	s->max = led->max_torch_current_ma * 1000;
+	s->val = min_t(u32, s->max, TORCH_CURRENT_DEFAULT_UA);
+
+	strscpy(v4l2_cfg.dev_name, led->flash.led_cdev.dev->kobj.name,
+					sizeof(v4l2_cfg.dev_name));
+	v4l2_cfg.has_external_strobe = 1;
+	v4l2_cfg.flash_faults = LED_FAULT_INPUT_VOLTAGE | LED_FAULT_OVER_CURRENT |
+		LED_FAULT_SHORT_CIRCUIT | LED_FAULT_OVER_TEMPERATURE | LED_FAULT_TIMEOUT;
+
+	led->v4l2_flash = v4l2_flash_init(led->chip->dev, fwnode, &led->flash,
+					&qcom_v4l2_flash_ops, &v4l2_cfg);
+	return PTR_ERR_OR_ZERO(led->v4l2_flash);
+}
+# else
+static int qcom_flash_v4l2_init(struct qcom_flash_led *led, struct fwnode_handle *fwnode)
+{
+	return 0;
+}
+#endif
+
+static int qcom_flash_register_led_device(struct device *parent,
+		struct fwnode_handle *node, struct qcom_flash_led *led)
+{
+	struct qcom_flash_chip *chip = led->chip;
+	struct led_init_data init_data;
+	struct led_classdev_flash *flash;
+	struct led_flash_setting *s;
+	u32 count, val;
+	u32 channels[4];
+	int i, rc;
+
+	flash = &led->flash;
+	count = fwnode_property_count_u32(node, "led-sources");
+	if (count <= 0) {
+		dev_err(chip->dev, "No led-sources specified\n");
+		return -ENODEV;
+	}
+
+	if (count > chip->max_channels) {
+		dev_err(chip->dev, "led-sources count %u exceeds maximum channel count %u\n",
+				count, chip->max_channels);
+		return -EINVAL;
+	}
+
+	rc = fwnode_property_read_u32_array(node, "led-sources", channels, count);
+	if (rc < 0) {
+		dev_err(chip->dev, "get led-sources failed, rc=%d\n", rc);
+		return rc;
+	}
+
+	led->chan_count = count;
+	led->chan_id = devm_kcalloc(chip->dev, count, sizeof(u8), GFP_KERNEL);
+	if (!led->chan_id)
+		return -ENOMEM;
+
+	for (i = 0; i < count; i++) {
+		if (channels[i] > chip->max_channels) {
+			dev_err(chip->dev, "led-source out of HW support range [1-%u]\n",
+					chip->max_channels);
+			return -EINVAL;
+		}
+
+		led->chan_id[i] = channels[i];
+	}
+
+	rc = fwnode_property_read_u32(node, "led-max-microamp", &val);
+	if (rc < 0) {
+		dev_err(chip->dev, "Get led-max-microamp failed, rc=%d\n", rc);
+		return rc;
+	}
+
+	if (!val) {
+		dev_err(chip->dev, "led-max-microamp shouldn't be 0\n");
+		return -EINVAL;
+	}
+
+	val = min_t(u32, val, TORCH_CURRENT_MAX_UA * led->chan_count);
+	led->max_torch_current_ma = val / 1000;
+
+	if (fwnode_property_present(node, "flash-max-microamp")) {
+		flash->led_cdev.flags |= LED_DEV_CAP_FLASH;
+		rc = fwnode_property_read_u32(node, "flash-max-microamp", &val);
+		if (rc < 0) {
+			dev_err(chip->dev, "Get flash-max-microamp failed, rc=%d\n", rc);
+			return rc;
+		}
+
+		val = min_t(u32, val, FLASH_CURRENT_MAX_UA * led->chan_count);
+		val = min_t(u32, val, FLASH_TOTAL_CURRENT_MAX_UA);
+		s = &flash->brightness;
+		s->min = s->step = FLASH_IRES_UA * led->chan_count;
+		s->max = val;
+		s->val = min_t(u32, val, FLASH_CURRENT_DEFAULT_UA);
+		led->max_flash_current_ma = val / 1000;
+		led->flash_current_ma = s->val / 1000;
+
+		rc = fwnode_property_read_u32(node, "flash-max-timeout-us", &val);
+		if (rc < 0) {
+			dev_err(chip->dev, "Get flash-max-timeout-us failed, rc=%d\n", rc);
+			return rc;
+		}
+
+		val = min_t(u32, val, FLASH_TIMEOUT_MAX_US);
+		s = &flash->timeout;
+		s->min = s->step = FLASH_TIMEOUT_STEP_US;
+		s->val = s->max = val;
+		led->max_timeout_ms = led->flash_timeout_ms = val / 1000;
+
+		flash->ops = &qcom_flash_ops;
+	}
+
+	flash->led_cdev.brightness_set_blocking = qcom_flash_led_brightness_set;
+	init_data.fwnode = node;
+	init_data.devicename = NULL;
+	init_data.default_label = NULL;
+	init_data.devname_mandatory = false;
+	rc = devm_led_classdev_flash_register_ext(parent, flash, &init_data);
+	if (rc < 0) {
+		dev_err(chip->dev, "Register flash LED classdev failed, rc=%d\n", rc);
+		return rc;
+	}
+
+	return qcom_flash_v4l2_init(led, node);
+}
+
+static int qcom_flash_led_probe(struct platform_device *pdev)
+{
+	struct qcom_flash_chip *chip;
+	struct qcom_flash_led *led;
+	struct fwnode_handle *child;
+	struct device *dev = &pdev->dev;
+	struct regmap *map;
+	struct reg_field *regs;
+	int count, i, rc;
+	u32 val, reg_base;
+
+	chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	map = dev_get_regmap(dev->parent, NULL);
+	if (!map) {
+		dev_err(dev, "Failed to get parent regmap\n");
+		return -EINVAL;
+	}
+
+	rc = fwnode_property_read_u32(dev->fwnode, "reg", &reg_base);
+	if (rc < 0) {
+		dev_err(dev, "Failed to get register base address, rc=%d\n", rc);
+		return rc;
+	}
+
+	rc = regmap_read(map, reg_base + FLASH_TYPE_REG, &val);
+	if (rc < 0) {
+		dev_err(dev, "Read flash module type failed, rc=%d\n", rc);
+		return rc;
+	}
+
+	if (val != FLASH_TYPE_VAL) {
+		dev_err(dev, "type %#x is not a flash module\n", val);
+		return -ENODEV;
+	}
+
+	rc = regmap_read(map, reg_base + FLASH_SUBTYPE_REG, &val);
+	if (rc < 0) {
+		dev_err(dev, "Read flash module subtype failed, rc=%d\n", rc);
+		return rc;
+	}
+
+	if (val == FLASH_SUBTYPE_3CH_VAL) {
+		chip->hw_type = QCOM_MVFLASH_3CH;
+		chip->max_channels = 3;
+		regs = mvflash_3ch_regs;
+	} else if (val == FLASH_SUBTYPE_4CH_VAL) {
+		chip->hw_type = QCOM_MVFLASH_4CH;
+		chip->max_channels = 4;
+		regs = mvflash_4ch_regs;
+	} else {
+		dev_err(dev, "flash subtype %#x is not yet supported\n", val);
+		return -ENODEV;
+	}
+
+	for (i = 0; i < REG_MAX_COUNT; i++)
+		regs[i].reg += reg_base;
+
+	rc = devm_regmap_field_bulk_alloc(dev, map, chip->r_fields, regs, REG_MAX_COUNT);
+	if (rc < 0) {
+		dev_err(dev, "failed to alloc regmap filed, rc=%d\n", rc);
+		return rc;
+	}
+
+	chip->dev = dev;
+	platform_set_drvdata(pdev, chip);
+	mutex_init(&chip->lock);
+	count = device_get_child_node_count(dev);
+	if (count == 0 || count > chip->max_channels) {
+		dev_err(dev, "No child or child count exceeds %d\n", chip->max_channels);
+		return -EINVAL;
+	}
+
+	chip->leds = devm_kcalloc(dev, count, sizeof(*chip->leds), GFP_KERNEL);
+	if (!chip->leds)
+		return -ENOMEM;
+
+	device_for_each_child_node(dev, child) {
+		led = &chip->leds[chip->leds_count];
+		led->chip = chip;
+		rc = qcom_flash_register_led_device(dev, child, led);
+		if (rc < 0)
+			goto release;
+
+		chip->leds_count++;
+	}
+
+	return 0;
+release:
+	while (chip->leds && chip->leds_count--)
+		v4l2_flash_release(chip->leds[chip->leds_count].v4l2_flash);
+	return rc;
+}
+
+static int qcom_flash_led_remove(struct platform_device *pdev)
+{
+	struct qcom_flash_chip *chip = platform_get_drvdata(pdev);
+
+	while (chip->leds_count--)
+		v4l2_flash_release(chip->leds[chip->leds_count].v4l2_flash);
+
+	mutex_destroy(&chip->lock);
+	return 0;
+}
+
+static const struct of_device_id qcom_flash_led_match_table[] = {
+	{ .compatible = "qcom,spmi-flash-led" },
+	{ }
+};
+
+static struct platform_driver qcom_flash_led_driver = {
+	.driver = {
+		.name = "leds-qcom-flash",
+		.of_match_table = qcom_flash_led_match_table,
+	},
+	.probe = qcom_flash_led_probe,
+	.remove = qcom_flash_led_remove,
+};
+
+module_platform_driver(qcom_flash_led_driver);
+
+MODULE_DESCRIPTION("QCOM Flash LED driver");
+MODULE_LICENSE("GPL");