From patchwork Mon Oct 24 11:26:02 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Greg KH X-Patchwork-Id: 10084 Return-Path: Delivered-To: ouuuleilei@gmail.com Received: by 2002:a5d:6687:0:0:0:0:0 with SMTP id l7csp625140wru; Mon, 24 Oct 2022 12:53:34 -0700 (PDT) X-Google-Smtp-Source: AMsMyM60Ym4VkvtGCD3Exju38Aw7ofnXboFhLVoa8SxAYWSX2oV83RPQb7EiXHQ0xV39+2Q7tndG X-Received: by 2002:a05:6402:3547:b0:45d:1578:9424 with SMTP id f7-20020a056402354700b0045d15789424mr31461964edd.281.1666641214090; Mon, 24 Oct 2022 12:53:34 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1666641214; cv=none; d=google.com; s=arc-20160816; b=FhdDSyqVUmZRE5eLXUNPZhjr6TJY1xcvDnmDD3X7M/ElINs9vkOBScEwUdmCd3nhY7 +H6B7ZVWewza0XIwxnGC9HFcyIFwJYje/iQnnpc2JfWPX9YDkTzJLidu1pcgJMaXgX2k w2FAIn8SdZkj6qm8snYF8N681aSpG7jPmxa02/N0UWFQh58tIlsk1UswcKu/1j+bnhCl HUZFriR03Dmkftg1Tc3Tv0Uut2DW+bzGFWHWrkdgycBIN1h6Ld7Syv4NFE1xCyVs8qax SoJn6zjI/g8cN4BkXOoj6QYEJPCwrtIqtCICyzhA8hTWGzEQx8q+b5d1Cd6/5bB+S+33 T5Yw== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:content-transfer-encoding:mime-version :user-agent:references:in-reply-to:message-id:date:subject:cc:to :from:dkim-signature; bh=8FHYFr4Nwdv/iOPNXYj6eVcFWvQYx1EYUPazb6fkq3I=; b=uosprnpJzS2EboV5imU9JFPlW+TNo3cubujEyz6GQPraVIzMgvOvjGOKwN+dsDgkKf SNPUE2HwhoJcNozMLxbLh8eBNHrfSbNWbSgS2J5IIVeByGc/3Obl61KqUI/QW519CyH/ v9yUJ5ndx7MHghtRIN89GZCnzzH6+xZqZNqmWLeQGCRXveWs4N6U/7pcpZePLYwcoHNl 5/uPxbNCm85ZWinFakDp9vpw0Er7hoFvnjefmMoC/N8l9h/rx6YyBeICl4MJiUd8gYKn U+2rJqxlmd7MDDHG+93/bzrOh6WckzWfOVWWD7mG2gBMHVk3k3sMqc8UREeeStuyIGHj tqEg== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@linuxfoundation.org header.s=korg header.b=amAh61bE; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linuxfoundation.org Received: from out1.vger.email (out1.vger.email. [2620:137:e000::1:20]) by mx.google.com with ESMTP id sc13-20020a1709078a0d00b0072b0f6f1456si624430ejc.612.2022.10.24.12.53.07; Mon, 24 Oct 2022 12:53:34 -0700 (PDT) Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20; Authentication-Results: mx.google.com; dkim=pass header.i=@linuxfoundation.org header.s=korg header.b=amAh61bE; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linuxfoundation.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S231392AbiJXTwX (ORCPT + 99 others); Mon, 24 Oct 2022 15:52:23 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:38466 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S233557AbiJXTvr (ORCPT ); Mon, 24 Oct 2022 15:51:47 -0400 Received: from ams.source.kernel.org (ams.source.kernel.org [IPv6:2604:1380:4601:e00::1]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id BD5BC5073E; Mon, 24 Oct 2022 11:17:08 -0700 (PDT) Received: from smtp.kernel.org (relay.kernel.org [52.25.139.140]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by ams.source.kernel.org (Postfix) with ESMTPS id 97290B8171B; Mon, 24 Oct 2022 12:33:46 +0000 (UTC) Received: by smtp.kernel.org (Postfix) with ESMTPSA id E648DC433C1; Mon, 24 Oct 2022 12:33:44 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=linuxfoundation.org; s=korg; t=1666614825; bh=lHA+zVgSOdyqCjkiWL6eqbyOGZwAZZm29Yp/49MU+HM=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=amAh61bEiYY8derGj+RfX0I1J5GaSa2BK6yB4yqDDIEtlTVTG46axI1KUAMoUYD99 HGfHzfUQOaOVqyPrssR+Gnl7oX12InBb+9Qazt/uQFE9tN+zsP+HqpBKglwXHCIf+9 UK4k44ymO6ggipFuOwi8YdMdXoOAEbOqj4SkJG3Y= From: Greg Kroah-Hartman To: linux-kernel@vger.kernel.org Cc: Greg Kroah-Hartman , stable@vger.kernel.org, Eddie James , Joel Stanley , Andy Shevchenko , Jonathan Cameron Subject: [PATCH 5.15 018/530] iio: pressure: dps310: Refactor startup procedure Date: Mon, 24 Oct 2022 13:26:02 +0200 Message-Id: <20221024113045.853469548@linuxfoundation.org> X-Mailer: git-send-email 2.38.1 In-Reply-To: <20221024113044.976326639@linuxfoundation.org> References: <20221024113044.976326639@linuxfoundation.org> User-Agent: quilt/0.67 MIME-Version: 1.0 X-Spam-Status: No, score=-7.6 required=5.0 tests=BAYES_00,DKIMWL_WL_HIGH, DKIM_SIGNED,DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,RCVD_IN_DNSWL_HI, SPF_HELO_NONE,SPF_PASS autolearn=ham autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org X-getmail-retrieved-from-mailbox: =?utf-8?q?INBOX?= X-GMAIL-THRID: =?utf-8?q?1747599977815135615?= X-GMAIL-MSGID: =?utf-8?q?1747599977815135615?= From: Eddie James commit c2329717bdd3fa62f8a2f3d8d85ad0bee4556bd7 upstream. Move the startup procedure into a function, and correct a missing check on the return code for writing the PRS_CFG register. Cc: Signed-off-by: Eddie James Reviewed-by: Joel Stanley Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20220915195719.136812-2-eajames@linux.ibm.com Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman --- drivers/iio/pressure/dps310.c | 188 ++++++++++++++++++++++-------------------- 1 file changed, 99 insertions(+), 89 deletions(-) --- a/drivers/iio/pressure/dps310.c +++ b/drivers/iio/pressure/dps310.c @@ -159,6 +159,102 @@ static int dps310_get_coefs(struct dps31 return 0; } +/* + * Some versions of the chip will read temperatures in the ~60C range when + * it's actually ~20C. This is the manufacturer recommended workaround + * to correct the issue. The registers used below are undocumented. + */ +static int dps310_temp_workaround(struct dps310_data *data) +{ + int rc; + int reg; + + rc = regmap_read(data->regmap, 0x32, ®); + if (rc) + return rc; + + /* + * If bit 1 is set then the device is okay, and the workaround does not + * need to be applied + */ + if (reg & BIT(1)) + return 0; + + rc = regmap_write(data->regmap, 0x0e, 0xA5); + if (rc) + return rc; + + rc = regmap_write(data->regmap, 0x0f, 0x96); + if (rc) + return rc; + + rc = regmap_write(data->regmap, 0x62, 0x02); + if (rc) + return rc; + + rc = regmap_write(data->regmap, 0x0e, 0x00); + if (rc) + return rc; + + return regmap_write(data->regmap, 0x0f, 0x00); +} + +static int dps310_startup(struct dps310_data *data) +{ + int rc; + int ready; + + /* + * Set up pressure sensor in single sample, one measurement per second + * mode + */ + rc = regmap_write(data->regmap, DPS310_PRS_CFG, 0); + if (rc) + return rc; + + /* + * Set up external (MEMS) temperature sensor in single sample, one + * measurement per second mode + */ + rc = regmap_write(data->regmap, DPS310_TMP_CFG, DPS310_TMP_EXT); + if (rc) + return rc; + + /* Temp and pressure shifts are disabled when PRC <= 8 */ + rc = regmap_write_bits(data->regmap, DPS310_CFG_REG, + DPS310_PRS_SHIFT_EN | DPS310_TMP_SHIFT_EN, 0); + if (rc) + return rc; + + /* MEAS_CFG doesn't update correctly unless first written with 0 */ + rc = regmap_write_bits(data->regmap, DPS310_MEAS_CFG, + DPS310_MEAS_CTRL_BITS, 0); + if (rc) + return rc; + + /* Turn on temperature and pressure measurement in the background */ + rc = regmap_write_bits(data->regmap, DPS310_MEAS_CFG, + DPS310_MEAS_CTRL_BITS, DPS310_PRS_EN | + DPS310_TEMP_EN | DPS310_BACKGROUND); + if (rc) + return rc; + + /* + * Calibration coefficients required for reporting temperature. + * They are available 40ms after the device has started + */ + rc = regmap_read_poll_timeout(data->regmap, DPS310_MEAS_CFG, ready, + ready & DPS310_COEF_RDY, 10000, 40000); + if (rc) + return rc; + + rc = dps310_get_coefs(data); + if (rc) + return rc; + + return dps310_temp_workaround(data); +} + static int dps310_get_pres_precision(struct dps310_data *data) { int rc; @@ -677,52 +773,12 @@ static const struct iio_info dps310_info .write_raw = dps310_write_raw, }; -/* - * Some verions of chip will read temperatures in the ~60C range when - * its actually ~20C. This is the manufacturer recommended workaround - * to correct the issue. The registers used below are undocumented. - */ -static int dps310_temp_workaround(struct dps310_data *data) -{ - int rc; - int reg; - - rc = regmap_read(data->regmap, 0x32, ®); - if (rc < 0) - return rc; - - /* - * If bit 1 is set then the device is okay, and the workaround does not - * need to be applied - */ - if (reg & BIT(1)) - return 0; - - rc = regmap_write(data->regmap, 0x0e, 0xA5); - if (rc < 0) - return rc; - - rc = regmap_write(data->regmap, 0x0f, 0x96); - if (rc < 0) - return rc; - - rc = regmap_write(data->regmap, 0x62, 0x02); - if (rc < 0) - return rc; - - rc = regmap_write(data->regmap, 0x0e, 0x00); - if (rc < 0) - return rc; - - return regmap_write(data->regmap, 0x0f, 0x00); -} - static int dps310_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct dps310_data *data; struct iio_dev *iio; - int rc, ready; + int rc; iio = devm_iio_device_alloc(&client->dev, sizeof(*data)); if (!iio) @@ -747,54 +803,8 @@ static int dps310_probe(struct i2c_clien if (rc) return rc; - /* - * Set up pressure sensor in single sample, one measurement per second - * mode - */ - rc = regmap_write(data->regmap, DPS310_PRS_CFG, 0); - - /* - * Set up external (MEMS) temperature sensor in single sample, one - * measurement per second mode - */ - rc = regmap_write(data->regmap, DPS310_TMP_CFG, DPS310_TMP_EXT); - if (rc < 0) - return rc; - - /* Temp and pressure shifts are disabled when PRC <= 8 */ - rc = regmap_write_bits(data->regmap, DPS310_CFG_REG, - DPS310_PRS_SHIFT_EN | DPS310_TMP_SHIFT_EN, 0); - if (rc < 0) - return rc; - - /* MEAS_CFG doesn't update correctly unless first written with 0 */ - rc = regmap_write_bits(data->regmap, DPS310_MEAS_CFG, - DPS310_MEAS_CTRL_BITS, 0); - if (rc < 0) - return rc; - - /* Turn on temperature and pressure measurement in the background */ - rc = regmap_write_bits(data->regmap, DPS310_MEAS_CFG, - DPS310_MEAS_CTRL_BITS, DPS310_PRS_EN | - DPS310_TEMP_EN | DPS310_BACKGROUND); - if (rc < 0) - return rc; - - /* - * Calibration coefficients required for reporting temperature. - * They are available 40ms after the device has started - */ - rc = regmap_read_poll_timeout(data->regmap, DPS310_MEAS_CFG, ready, - ready & DPS310_COEF_RDY, 10000, 40000); - if (rc < 0) - return rc; - - rc = dps310_get_coefs(data); - if (rc < 0) - return rc; - - rc = dps310_temp_workaround(data); - if (rc < 0) + rc = dps310_startup(data); + if (rc) return rc; rc = devm_iio_device_register(&client->dev, iio);