Commit Message
Greg KH
Oct. 24, 2022, 11:32 a.m. UTC
From: Aric Cyr <aric.cyr@amd.com> [ Upstream commit 97d8d6f075bd8f988589be02b91f6fa644d0b0b8 ] [why] Only a single VLINE interrupt is available so interface should not expose the second one which is used by DMU firmware. [how] Remove references to periodic_interrupt1 and VLINE1 from DC interfaces. Reviewed-by: Jaehyun Chung <jaehyun.chung@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org> --- drivers/gpu/drm/amd/display/dc/core/dc.c | 16 +++------ drivers/gpu/drm/amd/display/dc/dc_stream.h | 6 ++-- .../amd/display/dc/dcn10/dcn10_hw_sequencer.c | 35 ++++++------------- .../amd/display/dc/dcn10/dcn10_hw_sequencer.h | 3 +- .../gpu/drm/amd/display/dc/inc/hw_sequencer.h | 8 +---- 5 files changed, 18 insertions(+), 50 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc.c b/drivers/gpu/drm/amd/display/dc/core/dc.c index 93f5229c303e..99887bcfada0 100644 --- a/drivers/gpu/drm/amd/display/dc/core/dc.c +++ b/drivers/gpu/drm/amd/display/dc/core/dc.c @@ -2202,11 +2202,8 @@ static void copy_stream_update_to_stream(struct dc *dc, if (update->abm_level) stream->abm_level = *update->abm_level; - if (update->periodic_interrupt0) - stream->periodic_interrupt0 = *update->periodic_interrupt0; - - if (update->periodic_interrupt1) - stream->periodic_interrupt1 = *update->periodic_interrupt1; + if (update->periodic_interrupt) + stream->periodic_interrupt = *update->periodic_interrupt; if (update->gamut_remap) stream->gamut_remap_matrix = *update->gamut_remap; @@ -2288,13 +2285,8 @@ static void commit_planes_do_stream_update(struct dc *dc, if (!pipe_ctx->top_pipe && !pipe_ctx->prev_odm_pipe && pipe_ctx->stream == stream) { - if (stream_update->periodic_interrupt0 && - dc->hwss.setup_periodic_interrupt) - dc->hwss.setup_periodic_interrupt(dc, pipe_ctx, VLINE0); - - if (stream_update->periodic_interrupt1 && - dc->hwss.setup_periodic_interrupt) - dc->hwss.setup_periodic_interrupt(dc, pipe_ctx, VLINE1); + if (stream_update->periodic_interrupt && dc->hwss.setup_periodic_interrupt) + dc->hwss.setup_periodic_interrupt(dc, pipe_ctx); if ((stream_update->hdr_static_metadata && !stream->use_dynamic_meta) || stream_update->vrr_infopacket || diff --git a/drivers/gpu/drm/amd/display/dc/dc_stream.h b/drivers/gpu/drm/amd/display/dc/dc_stream.h index 205bedd1b196..0487c1b8957c 100644 --- a/drivers/gpu/drm/amd/display/dc/dc_stream.h +++ b/drivers/gpu/drm/amd/display/dc/dc_stream.h @@ -179,8 +179,7 @@ struct dc_stream_state { /* DMCU info */ unsigned int abm_level; - struct periodic_interrupt_config periodic_interrupt0; - struct periodic_interrupt_config periodic_interrupt1; + struct periodic_interrupt_config periodic_interrupt; /* from core_stream struct */ struct dc_context *ctx; @@ -244,8 +243,7 @@ struct dc_stream_update { struct dc_info_packet *hdr_static_metadata; unsigned int *abm_level; - struct periodic_interrupt_config *periodic_interrupt0; - struct periodic_interrupt_config *periodic_interrupt1; + struct periodic_interrupt_config *periodic_interrupt; struct dc_info_packet *vrr_infopacket; struct dc_info_packet *vsc_infopacket; diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c index 31a13daf4289..71a85c5306ed 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c +++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c @@ -3611,7 +3611,7 @@ void dcn10_calc_vupdate_position( { const struct dc_crtc_timing *dc_crtc_timing = &pipe_ctx->stream->timing; int vline_int_offset_from_vupdate = - pipe_ctx->stream->periodic_interrupt0.lines_offset; + pipe_ctx->stream->periodic_interrupt.lines_offset; int vupdate_offset_from_vsync = dc->hwss.get_vupdate_offset_from_vsync(pipe_ctx); int start_position; @@ -3636,18 +3636,10 @@ void dcn10_calc_vupdate_position( static void dcn10_cal_vline_position( struct dc *dc, struct pipe_ctx *pipe_ctx, - enum vline_select vline, uint32_t *start_line, uint32_t *end_line) { - enum vertical_interrupt_ref_point ref_point = INVALID_POINT; - - if (vline == VLINE0) - ref_point = pipe_ctx->stream->periodic_interrupt0.ref_point; - else if (vline == VLINE1) - ref_point = pipe_ctx->stream->periodic_interrupt1.ref_point; - - switch (ref_point) { + switch (pipe_ctx->stream->periodic_interrupt.ref_point) { case START_V_UPDATE: dcn10_calc_vupdate_position( dc, @@ -3656,7 +3648,9 @@ static void dcn10_cal_vline_position( end_line); break; case START_V_SYNC: - // Suppose to do nothing because vsync is 0; + // vsync is line 0 so start_line is just the requested line offset + *start_line = pipe_ctx->stream->periodic_interrupt.lines_offset; + *end_line = *start_line + 2; break; default: ASSERT(0); @@ -3666,24 +3660,15 @@ static void dcn10_cal_vline_position( void dcn10_setup_periodic_interrupt( struct dc *dc, - struct pipe_ctx *pipe_ctx, - enum vline_select vline) + struct pipe_ctx *pipe_ctx) { struct timing_generator *tg = pipe_ctx->stream_res.tg; + uint32_t start_line = 0; + uint32_t end_line = 0; - if (vline == VLINE0) { - uint32_t start_line = 0; - uint32_t end_line = 0; + dcn10_cal_vline_position(dc, pipe_ctx, &start_line, &end_line); - dcn10_cal_vline_position(dc, pipe_ctx, vline, &start_line, &end_line); - - tg->funcs->setup_vertical_interrupt0(tg, start_line, end_line); - - } else if (vline == VLINE1) { - pipe_ctx->stream_res.tg->funcs->setup_vertical_interrupt1( - tg, - pipe_ctx->stream->periodic_interrupt1.lines_offset); - } + tg->funcs->setup_vertical_interrupt0(tg, start_line, end_line); } void dcn10_setup_vupdate_interrupt(struct dc *dc, struct pipe_ctx *pipe_ctx) diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.h b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.h index e5691e499023..81b5057d5ff1 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.h +++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.h @@ -174,8 +174,7 @@ void dcn10_set_cursor_attribute(struct pipe_ctx *pipe_ctx); void dcn10_set_cursor_sdr_white_level(struct pipe_ctx *pipe_ctx); void dcn10_setup_periodic_interrupt( struct dc *dc, - struct pipe_ctx *pipe_ctx, - enum vline_select vline); + struct pipe_ctx *pipe_ctx); enum dc_status dcn10_set_clock(struct dc *dc, enum dc_clock_type clock_type, uint32_t clk_khz, diff --git a/drivers/gpu/drm/amd/display/dc/inc/hw_sequencer.h b/drivers/gpu/drm/amd/display/dc/inc/hw_sequencer.h index 64c1be818b0e..3165a66c5362 100644 --- a/drivers/gpu/drm/amd/display/dc/inc/hw_sequencer.h +++ b/drivers/gpu/drm/amd/display/dc/inc/hw_sequencer.h @@ -32,11 +32,6 @@ #include "inc/hw/link_encoder.h" #include "core_status.h" -enum vline_select { - VLINE0, - VLINE1 -}; - struct pipe_ctx; struct dc_state; struct dc_stream_status; @@ -112,8 +107,7 @@ struct hw_sequencer_funcs { int group_index, int group_size, struct pipe_ctx *grouped_pipes[]); void (*setup_periodic_interrupt)(struct dc *dc, - struct pipe_ctx *pipe_ctx, - enum vline_select vline); + struct pipe_ctx *pipe_ctx); void (*set_drr)(struct pipe_ctx **pipe_ctx, int num_pipes, unsigned int vmin, unsigned int vmax, unsigned int vmid, unsigned int vmid_frame_number);