Commit Message
Greg KH
Oct. 24, 2022, 11:31 a.m. UTC
From: Daniel Golle <daniel@makrotopia.org> [ Upstream commit cbde6ed406a51092d9e8a2df058f5f8490f27443 ] Instead of using the default value 33 (pci), set US_CYC_CNT init based on Programming guide: If available, set chipset bus clock with fallback to cpu clock/3. Reported-by: Serge Vasilugin <vasilugin@yandex.ru> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/3e275d259f476f597dab91a9c395015ef3fe3284.1663445157.git.daniel@makrotopia.org Signed-off-by: Sasha Levin <sashal@kernel.org> --- .../net/wireless/ralink/rt2x00/rt2800lib.c | 21 +++++++++++++++++++ 1 file changed, 21 insertions(+)
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c index b8224b215532..9469517ac65f 100644 --- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c @@ -5570,6 +5570,27 @@ static int rt2800_init_registers(struct rt2x00_dev *rt2x00dev) reg = rt2800_register_read(rt2x00dev, US_CYC_CNT); rt2x00_set_field32(®, US_CYC_CNT_CLOCK_CYCLE, 125); rt2800_register_write(rt2x00dev, US_CYC_CNT, reg); + } else if (rt2x00_is_soc(rt2x00dev)) { + struct clk *clk = clk_get_sys("bus", NULL); + int rate; + + if (IS_ERR(clk)) { + clk = clk_get_sys("cpu", NULL); + + if (IS_ERR(clk)) { + rate = 125; + } else { + rate = clk_get_rate(clk) / 3000000; + clk_put(clk); + } + } else { + rate = clk_get_rate(clk) / 1000000; + clk_put(clk); + } + + reg = rt2800_register_read(rt2x00dev, US_CYC_CNT); + rt2x00_set_field32(®, US_CYC_CNT_CLOCK_CYCLE, rate); + rt2800_register_write(rt2x00dev, US_CYC_CNT, reg); } reg = rt2800_register_read(rt2x00dev, HT_FBK_CFG0);