diff mbox series

[v2,2/4] arm64: boot: dts: msm8996: add blsp1_i2c6 node

Message ID 20221023204505.115141-3-hpausten@protonmail.com
State New
Headers
Series Initial OnePlus 3(T) Support |

Commit Message

Harry Austen Oct. 23, 2022, 8:45 p.m. UTC 
  Add support for the sixth I2C interface on the MSM8996 SoC.

Signed-off-by: Harry Austen <hpausten@protonmail.com>
---
v1 -> v2: use hyphens and add "-state" pinctrl node name suffix

 arch/arm64/boot/dts/qcom/msm8996.dtsi | 31 +++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)

--
2.38.1

Comments

Krzysztof Kozlowski Oct. 23, 2022, 11:24 p.m. UTC | #1 
On 23/10/2022 16:45, Harry Austen wrote:
> Add support for the sixth I2C interface on the MSM8996 SoC.
> 
> Signed-off-by: Harry Austen <hpausten@protonmail.com>
> ---
> v1 -> v2: use hyphens and add "-state" pinctrl node name suffix
> 


Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 39afd8a99488..bb49496a5413 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -1418,6 +1418,20 @@  pwdn {
 				};
 			};

+			blsp1_i2c6_default: blsp1-i2c6-state {
+				pins = "gpio27", "gpio28";
+				function = "blsp_i2c6";
+				drive-strength = <16>;
+				bias-disable;
+			};
+
+			blsp1_i2c6_sleep: blsp1-i2c6-sleep-state {
+				pins = "gpio27", "gpio28";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
 			pcie0_state_on: pcie0-state-on {
 				perst {
 					pins = "gpio35";
@@ -3141,6 +3155,23 @@  blsp1_i2c3: i2c@7577000 {
 			status = "disabled";
 		};

+		blsp1_i2c6: i2c@757a000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x757a000 0x1000>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp1_i2c6_default>;
+			pinctrl-1 = <&blsp1_i2c6_sleep>;
+			dmas = <&blsp1_dma 22>, <&blsp1_dma 23>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		blsp2_dma: dma-controller@7584000 {
 			compatible = "qcom,bam-v1.7.0";
 			reg = <0x07584000 0x2b000>;