[v2,3/5] dt-bindings: mmc: mtk-sd: Set clocks based on compatible

  From: Nícolas F. R. A. Prado <nfraprado@collabora.com>

The binding was describing a single clock list for all platforms, but
that's not really suitable: mt2712 requires an extra 'bus_clk' on some
of its controllers, while mt8192 requires four different extra clocks.
The rest of the platforms can share the same 3 clocks, with the third
being optional as it's not present on all platforms.

Move the clock definitions inside if blocks that match on the
compatibles. In practice this gets rid of dtbs_check warnings on mt8192,
since the 'bus_clk' clock from mt2712 is no longer expected on this
platform.

Fixes: 59a23395d8aa ("dt-bindings: mmc: Add support for MT8192 SoC")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
 .../devicetree/bindings/mmc/mtk-sd.yaml       | 111 +++++++++++++-----
 1 file changed, 81 insertions(+), 30 deletions(-)
  

On 22/10/2022 05:05, Frank Wunderlich wrote:
> From: Nícolas F. R. A. Prado <nfraprado@collabora.com>
> 
> The binding was describing a single clock list for all platforms, but
> that's not really suitable: mt2712 requires an extra 'bus_clk' on some
> of its controllers, while mt8192 requires four different extra clocks.
> The rest of the platforms can share the same 3 clocks, with the third
> being optional as it's not present on all platforms.

It was also wrong...

> 
> Move the clock definitions inside if blocks that match on the
> compatibles. In practice this gets rid of dtbs_check warnings on mt8192,
> since the 'bus_clk' clock from mt2712 is no longer expected on this
> platform.
> 
> Fixes: 59a23395d8aa ("dt-bindings: mmc: Add support for MT8192 SoC")
> Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
> Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
> ---
>  .../devicetree/bindings/mmc/mtk-sd.yaml       | 111 +++++++++++++-----
>  1 file changed, 81 insertions(+), 30 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.yaml b/Documentation/devicetree/bindings/mmc/mtk-sd.yaml
> index 3cbf0208f1b4..c7bcf0c3dd5d 100644
> --- a/Documentation/devicetree/bindings/mmc/mtk-sd.yaml
> +++ b/Documentation/devicetree/bindings/mmc/mtk-sd.yaml
> @@ -10,9 +10,6 @@ maintainers:
>    - Chaotian Jing <chaotian.jing@mediatek.com>
>    - Wenbin Mei <wenbin.mei@mediatek.com>
>  
> -allOf:
> -  - $ref: mmc-controller.yaml#
> -
>  properties:
>    compatible:
>      oneOf:
> @@ -49,27 +46,11 @@ properties:
>      description:
>        Should contain phandle for the clock feeding the MMC controller.
>      minItems: 2
> -    items:
> -      - description: source clock (required).
> -      - description: HCLK which used for host (required).
> -      - description: independent source clock gate (required for MT2712).
> -      - description: bus clock used for internal register access (required for MT2712 MSDC0/3).
> -      - description: msdc subsys clock gate (required for MT8192).
> -      - description: peripheral bus clock gate (required for MT8192).
> -      - description: AXI bus clock gate (required for MT8192).
> -      - description: AHB bus clock gate (required for MT8192).
> +    maxItems: 7

Confusing to see 8 clocks replaced by 7, but I guess this is problem of
old bindings.
>  
>    clock-names:
>      minItems: 2
> -    items:
> -      - const: source
> -      - const: hclk
> -      - const: source_cg
> -      - const: bus_clk
> -      - const: sys_cg
> -      - const: pclk_cg
> -      - const: axi_cg
> -      - const: ahb_cg
> +    maxItems: 7
>  
>    interrupts:
>      description:
> @@ -191,15 +172,85 @@ required:
>    - vmmc-supply
>    - vqmmc-supply
>  
> -if:
> -  properties:
> -    compatible:
> -      contains:
> -        const: mediatek,mt8183-mmc
> -then:
> -  properties:
> -    reg:
> -      minItems: 2
> +allOf:
> +  - $ref: mmc-controller.yaml#
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: mediatek,mt8183-mmc
> +    then:
> +      properties:
> +        reg:
> +          minItems: 2

Blank line

> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: mediatek,mt8192-mmc
> +    then:
> +      properties:
> +        clocks:
> +          items:
> +            - description: source clock
> +            - description: HCLK which used for host
> +            - description: independent source clock gate
> +            - description: msdc subsys clock gate
> +            - description: peripheral bus clock gate
> +            - description: AXI bus clock gate
> +            - description: AHB bus clock gate
> +        clock-names:
> +          items:
> +            - const: source
> +            - const: hclk
> +            - const: source_cg
> +            - const: sys_cg
> +            - const: pclk_cg
> +            - const: axi_cg
> +            - const: ahb_cg

Blank line

> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: mediatek,mt2712-mmc
> +    then:
> +      properties:
> +        clocks:
> +          minItems: 3
> +          items:
> +            - description: source clock
> +            - description: HCLK which used for host
> +            - description: independent source clock gate
> +            - description: bus clock used for internal register access (required for MSDC0/3).
> +        clock-names:
> +          minItems: 3
> +          items:
> +            - const: source
> +            - const: hclk
> +            - const: source_cg
> +            - const: bus_clk

Blank line

> +  - if:
> +      not:

Can you not use negation, but list applicable compatibles? It would be
easier to read, I think

> +        properties:
> +          compatible:
> +            contains:
> +              enum:
> +                - mediatek,mt2712-mmc
> +                - mediatek,mt8192-mmc
Best regards,
Krzysztof