Commit Message
Greg KH
Oct. 22, 2022, 7:24 a.m. UTC
From: Matt Ranostay <mranostay@ti.com> [ Upstream commit 0d0a0b4413460383331088b2203ba09a6971bc3a ] Range size of 0x2b4 was incorrect since there isn't 173 configurable pins for muxing. Additionally there is a non-addressable region in the mapping which requires splitting into two ranges. main_pmx0 -> 67 pins main_pmx1 -> 3 pins Fixes: d361ed88455f ("arm64: dts: ti: Add support for J7200 SoC") Signed-off-by: Matt Ranostay <mranostay@ti.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Tested-by: Vaishnav Achath <vaishnav.a@ti.com> Link: https://lore.kernel.org/r/20220919205723.8342-1-mranostay@ti.com Signed-off-by: Sasha Levin <sashal@kernel.org> --- arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts | 10 ++++++---- arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 11 ++++++++++- 2 files changed, 16 insertions(+), 5 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts index 121975dc8239..7e8552fd2b6a 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts +++ b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts @@ -134,15 +134,17 @@ >; }; - main_usbss0_pins_default: main-usbss0-pins-default { + vdd_sd_dv_pins_default: vdd-sd-dv-pins-default { pinctrl-single,pins = < - J721E_IOPAD(0x120, PIN_OUTPUT, 0) /* (T4) USB0_DRVVBUS */ + J721E_IOPAD(0xd0, PIN_OUTPUT, 7) /* (T5) SPI0_D1.GPIO0_55 */ >; }; +}; - vdd_sd_dv_pins_default: vdd-sd-dv-pins-default { +&main_pmx1 { + main_usbss0_pins_default: main-usbss0-pins-default { pinctrl-single,pins = < - J721E_IOPAD(0xd0, PIN_OUTPUT, 7) /* (T5) SPI0_D1.GPIO0_55 */ + J721E_IOPAD(0x04, PIN_OUTPUT, 0) /* (T4) USB0_DRVVBUS */ >; }; }; diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi index 16684a2f054d..e12a53f1857f 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi @@ -295,7 +295,16 @@ main_pmx0: pinctrl@11c000 { compatible = "pinctrl-single"; /* Proxy 0 addressing */ - reg = <0x00 0x11c000 0x00 0x2b4>; + reg = <0x00 0x11c000 0x00 0x10c>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0xffffffff>; + }; + + main_pmx1: pinctrl@11c11c { + compatible = "pinctrl-single"; + /* Proxy 0 addressing */ + reg = <0x00 0x11c11c 0x00 0xc>; #pinctrl-cells = <1>; pinctrl-single,register-width = <32>; pinctrl-single,function-mask = <0xffffffff>;