Commit Message
Greg KH
Oct. 22, 2022, 7:22 a.m. UTC
From: Bitterblue Smith <rtl8821cerfe2@gmail.com> [ Upstream commit a8b5aef2cca15b7fa533421d462e4e0a3429bd6f ] The module parameter ht40_2g was supposed to enable 40 MHz operation, but it didn't. Tell the firmware about the channel width when updating the rate mask. This makes it work with my gen 2 chip RTL8188FU. I'm not sure if anything needs to be done for the gen 1 chips, if 40 MHz channel width already works or not. They update the rate mask with a different structure which doesn't have a field for the channel width. Also set the channel width correctly for sta_statistics. Fixes: f653e69009c6 ("rtl8xxxu: Implement basic 8723b specific update_rate_mask() function") Fixes: bd917b3d28c9 ("rtl8xxxu: fill up txrate info for gen1 chips") Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Jes Sorensen <jes@trained-monkey.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/3a950997-7580-8a6b-97a0-e0a81a135456@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org> --- .../net/wireless/realtek/rtl8xxxu/rtl8xxxu.h | 6 +++--- .../wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 21 +++++++++++++------ 2 files changed, 18 insertions(+), 9 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h index 7ddce3c3f0c4..782b089a2e1b 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h @@ -1425,7 +1425,7 @@ struct rtl8xxxu_fileops { void (*set_tx_power) (struct rtl8xxxu_priv *priv, int channel, bool ht40); void (*update_rate_mask) (struct rtl8xxxu_priv *priv, - u32 ramask, u8 rateid, int sgi); + u32 ramask, u8 rateid, int sgi, int txbw_40mhz); void (*report_connect) (struct rtl8xxxu_priv *priv, u8 macid, bool connect); void (*fill_txdesc) (struct ieee80211_hw *hw, struct ieee80211_hdr *hdr, @@ -1511,9 +1511,9 @@ void rtl8xxxu_gen2_config_channel(struct ieee80211_hw *hw); void rtl8xxxu_gen1_usb_quirks(struct rtl8xxxu_priv *priv); void rtl8xxxu_gen2_usb_quirks(struct rtl8xxxu_priv *priv); void rtl8xxxu_update_rate_mask(struct rtl8xxxu_priv *priv, - u32 ramask, u8 rateid, int sgi); + u32 ramask, u8 rateid, int sgi, int txbw_40mhz); void rtl8xxxu_gen2_update_rate_mask(struct rtl8xxxu_priv *priv, - u32 ramask, u8 rateid, int sgi); + u32 ramask, u8 rateid, int sgi, int txbw_40mhz); void rtl8xxxu_gen1_report_connect(struct rtl8xxxu_priv *priv, u8 macid, bool connect); void rtl8xxxu_gen2_report_connect(struct rtl8xxxu_priv *priv, diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c index 472b00c70781..5f9d6cce1114 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c @@ -4320,7 +4320,7 @@ static void rtl8xxxu_sw_scan_complete(struct ieee80211_hw *hw, } void rtl8xxxu_update_rate_mask(struct rtl8xxxu_priv *priv, - u32 ramask, u8 rateid, int sgi) + u32 ramask, u8 rateid, int sgi, int txbw_40mhz) { struct h2c_cmd h2c; @@ -4340,10 +4340,15 @@ void rtl8xxxu_update_rate_mask(struct rtl8xxxu_priv *priv, } void rtl8xxxu_gen2_update_rate_mask(struct rtl8xxxu_priv *priv, - u32 ramask, u8 rateid, int sgi) + u32 ramask, u8 rateid, int sgi, int txbw_40mhz) { struct h2c_cmd h2c; - u8 bw = RTL8XXXU_CHANNEL_WIDTH_20; + u8 bw; + + if (txbw_40mhz) + bw = RTL8XXXU_CHANNEL_WIDTH_40; + else + bw = RTL8XXXU_CHANNEL_WIDTH_20; memset(&h2c, 0, sizeof(struct h2c_cmd)); @@ -4621,7 +4626,11 @@ rtl8xxxu_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_vif *vif, RATE_INFO_FLAGS_SHORT_GI; } - rarpt->txrate.bw |= RATE_INFO_BW_20; + if (rtl8xxxu_ht40_2g && + (sta->deflink.ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40)) + rarpt->txrate.bw = RATE_INFO_BW_40; + else + rarpt->txrate.bw = RATE_INFO_BW_20; } bit_rate = cfg80211_calculate_bitrate(&rarpt->txrate); rarpt->bit_rate = bit_rate; @@ -4630,7 +4639,7 @@ rtl8xxxu_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_vif *vif, priv->vif = vif; priv->rssi_level = RTL8XXXU_RATR_STA_INIT; - priv->fops->update_rate_mask(priv, ramask, 0, sgi); + priv->fops->update_rate_mask(priv, ramask, 0, sgi, rarpt->txrate.bw == RATE_INFO_BW_40); rtl8xxxu_write8(priv, REG_BCN_MAX_ERR, 0xff); @@ -6343,7 +6352,7 @@ static void rtl8xxxu_refresh_rate_mask(struct rtl8xxxu_priv *priv, } priv->rssi_level = rssi_level; - priv->fops->update_rate_mask(priv, rate_bitmap, ratr_idx, sgi); + priv->fops->update_rate_mask(priv, rate_bitmap, ratr_idx, sgi, txbw_40mhz); } }