Commit Message
Greg KH
Oct. 22, 2022, 7:22 a.m. UTC
From: Jesus Fernandez Manzano <jesus.manzano@galgus.net> [ Upstream commit 55b5ee3357d7bb98ee578cf9b84a652e7a1bc199 ] The number of spatial streams used when acting as a beamformee in VHT mode are reported by the firmware as 7 (8 sts - 1) both in IPQ6018 and IPQ8074 which respectively have 2 and 4 sts each. So the firmware should report 1 (2 - 1) and 3 (4 - 1). Fix this by checking that the number of VHT beamformee sts reported by the firmware is not greater than the number of receiving antennas - 1. The fix is based on the same approach used in this same function for sanitizing the number of sounding dimensions reported by the firmware. Without this change, acting as a beamformee in VHT mode is not working properly. Tested-on: IPQ6018 hw1.0 AHB WLAN.HK.2.5.0.1-01208-QCAHKSWPL_SILICONZ-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-01208-QCAHKSWPL_SILICONZ-1 Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices") Signed-off-by: Jesus Fernandez Manzano <jesus.manzano@galgus.net> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220616173947.21901-1-jesus.manzano@galgus.net Signed-off-by: Sasha Levin <sashal@kernel.org> --- drivers/net/wireless/ath/ath11k/mac.c | 25 ++++++++++++++++++++----- 1 file changed, 20 insertions(+), 5 deletions(-)
diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c index 06b86dcc3826..94d9a7190953 100644 --- a/drivers/net/wireless/ath/ath11k/mac.c +++ b/drivers/net/wireless/ath/ath11k/mac.c @@ -4949,6 +4949,8 @@ static int ath11k_mac_set_txbf_conf(struct ath11k_vif *arvif) if (vht_cap & (IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE)) { nsts = vht_cap & IEEE80211_VHT_CAP_BEAMFORMEE_STS_MASK; nsts >>= IEEE80211_VHT_CAP_BEAMFORMEE_STS_SHIFT; + if (nsts > (ar->num_rx_chains - 1)) + nsts = ar->num_rx_chains - 1; value |= SM(nsts, WMI_TXBF_STS_CAP_OFFSET); } @@ -4989,7 +4991,7 @@ static int ath11k_mac_set_txbf_conf(struct ath11k_vif *arvif) static void ath11k_set_vht_txbf_cap(struct ath11k *ar, u32 *vht_cap) { bool subfer, subfee; - int sound_dim = 0; + int sound_dim = 0, nsts = 0; subfer = !!(*vht_cap & (IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE)); subfee = !!(*vht_cap & (IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE)); @@ -4999,6 +5001,11 @@ static void ath11k_set_vht_txbf_cap(struct ath11k *ar, u32 *vht_cap) subfer = false; } + if (ar->num_rx_chains < 2) { + *vht_cap &= ~(IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE); + subfee = false; + } + /* If SU Beaformer is not set, then disable MU Beamformer Capability */ if (!subfer) *vht_cap &= ~(IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE); @@ -5011,7 +5018,9 @@ static void ath11k_set_vht_txbf_cap(struct ath11k *ar, u32 *vht_cap) sound_dim >>= IEEE80211_VHT_CAP_SOUNDING_DIMENSIONS_SHIFT; *vht_cap &= ~IEEE80211_VHT_CAP_SOUNDING_DIMENSIONS_MASK; - /* TODO: Need to check invalid STS and Sound_dim values set by FW? */ + nsts = (*vht_cap & IEEE80211_VHT_CAP_BEAMFORMEE_STS_MASK); + nsts >>= IEEE80211_VHT_CAP_BEAMFORMEE_STS_SHIFT; + *vht_cap &= ~IEEE80211_VHT_CAP_BEAMFORMEE_STS_MASK; /* Enable Sounding Dimension Field only if SU BF is enabled */ if (subfer) { @@ -5023,9 +5032,15 @@ static void ath11k_set_vht_txbf_cap(struct ath11k *ar, u32 *vht_cap) *vht_cap |= sound_dim; } - /* Use the STS advertised by FW unless SU Beamformee is not supported*/ - if (!subfee) - *vht_cap &= ~(IEEE80211_VHT_CAP_BEAMFORMEE_STS_MASK); + /* Enable Beamformee STS Field only if SU BF is enabled */ + if (subfee) { + if (nsts > (ar->num_rx_chains - 1)) + nsts = ar->num_rx_chains - 1; + + nsts <<= IEEE80211_VHT_CAP_BEAMFORMEE_STS_SHIFT; + nsts &= IEEE80211_VHT_CAP_BEAMFORMEE_STS_MASK; + *vht_cap |= nsts; + } } static struct ieee80211_sta_vht_cap