[5.19,154/717] thunderbolt: Explicitly enable lane adapter hotplug events at startup
Commit Message
Greg KH
Oct. 22, 2022, 7:20 a.m. UTC
From: Mario Limonciello <mario.limonciello@amd.com> commit 5d2569cb4a65c373896ec0217febdf88739ed295 upstream. Software that has run before the USB4 CM in Linux runs may have disabled hotplug events for a given lane adapter. Other CMs such as that one distributed with Windows 11 will enable hotplug events. Do the same thing in the Linux CM which fixes hotplug events on "AMD Pink Sardine". Cc: stable@vger.kernel.org Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- drivers/thunderbolt/switch.c | 24 ++++++++++++++++++++++++ drivers/thunderbolt/tb.h | 1 + drivers/thunderbolt/tb_regs.h | 1 + drivers/thunderbolt/usb4.c | 20 ++++++++++++++++++++ 4 files changed, 46 insertions(+)
--- a/drivers/thunderbolt/switch.c +++ b/drivers/thunderbolt/switch.c @@ -2822,6 +2822,26 @@ static void tb_switch_credits_init(struc tb_sw_info(sw, "failed to determine preferred buffer allocation, using defaults\n"); } +static int tb_switch_port_hotplug_enable(struct tb_switch *sw) +{ + struct tb_port *port; + + if (tb_switch_is_icm(sw)) + return 0; + + tb_switch_for_each_port(sw, port) { + int res; + + if (!port->cap_usb4) + continue; + + res = usb4_port_hotplug_enable(port); + if (res) + return res; + } + return 0; +} + /** * tb_switch_add() - Add a switch to the domain * @sw: Switch to add @@ -2891,6 +2911,10 @@ int tb_switch_add(struct tb_switch *sw) return ret; } + ret = tb_switch_port_hotplug_enable(sw); + if (ret) + return ret; + ret = device_add(&sw->dev); if (ret) { dev_err(&sw->dev, "failed to add device: %d\n", ret); --- a/drivers/thunderbolt/tb.h +++ b/drivers/thunderbolt/tb.h @@ -1170,6 +1170,7 @@ int usb4_switch_add_ports(struct tb_swit void usb4_switch_remove_ports(struct tb_switch *sw); int usb4_port_unlock(struct tb_port *port); +int usb4_port_hotplug_enable(struct tb_port *port); int usb4_port_configure(struct tb_port *port); void usb4_port_unconfigure(struct tb_port *port); int usb4_port_configure_xdomain(struct tb_port *port); --- a/drivers/thunderbolt/tb_regs.h +++ b/drivers/thunderbolt/tb_regs.h @@ -302,6 +302,7 @@ struct tb_regs_port_header { #define ADP_CS_5 0x05 #define ADP_CS_5_LCA_MASK GENMASK(28, 22) #define ADP_CS_5_LCA_SHIFT 22 +#define ADP_CS_5_DHP BIT(31) /* TMU adapter registers */ #define TMU_ADP_CS_3 0x03 --- a/drivers/thunderbolt/usb4.c +++ b/drivers/thunderbolt/usb4.c @@ -1046,6 +1046,26 @@ int usb4_port_unlock(struct tb_port *por return tb_port_write(port, &val, TB_CFG_PORT, ADP_CS_4, 1); } +/** + * usb4_port_hotplug_enable() - Enables hotplug for a port + * @port: USB4 port to operate on + * + * Enables hot plug events on a given port. This is only intended + * to be used on lane, DP-IN, and DP-OUT adapters. + */ +int usb4_port_hotplug_enable(struct tb_port *port) +{ + int ret; + u32 val; + + ret = tb_port_read(port, &val, TB_CFG_PORT, ADP_CS_5, 1); + if (ret) + return ret; + + val &= ~ADP_CS_5_DHP; + return tb_port_write(port, &val, TB_CFG_PORT, ADP_CS_5, 1); +} + static int usb4_port_set_configured(struct tb_port *port, bool configured) { int ret;